Problem importing photos into photos.app from camera and iPhone

Connect Nikon D300 or iPhone 5S to Mac.
Photos.app comes on.
Select: import photos.
-73 photos coming from Nikon in Nikon's RAW format, NEF. 3 would not import because of "error in file format or other problem...."
-Disconnect the camera.
-Reconnect the camera.
-Attempt to import remaining images.
-Last three images import but are now out of order relative to when they were shot.
About 20 photos and videos coming from iPhone. Similar problem but one that required repeating the above process several times to get them all imported.
Anyone else seeing this or have any idea why it would be a problem?
Thanks

"Import Photos at their Current Location"
"Copy photos to a new location and Import"
"Move photos to a new location and Import"
"Move photos as Digital Negative (DNG) and Import"
I believe I *should* have an option to add to the library (I've seen screenshots of it).
I'm not sure I understand your question, since I don't recall the screenshot you mention. However, I like to add photos to my library w/o creating a new folder, too.
Here's an example of how I do this with my Nikon photos:
1. I already have some photos in my library. One folder is labeled Nikon, where I put my D80 photos (all of them, so far).
2. When I hook my camera/memory card to the computer, I manually drag the images to that folder on my drive called "Nikon". This is the same folder I have imported into LR previously.
3. Start LR, Select "Import", and migrate to and select that same folder ("Nikon", in my case).
4. LR will tell you that it is not importing certain files, because they're already in the library. Click OK and LR will import the other, new files into the same "Nikon" folder (in my example).
Voila! ..no new folders in LR, just more photos.:)
Obviously, I've set LR's preferences to "Do nothing" when a memory card/camera is detected.
If I missed your point, sorry for the distraction.
regards,
jeff

Similar Messages

When trying to update apps from iPad and iPhone a previous one time users email keeps coming up. How do I delete their information?

When trying to update apps from iPad and iPhone a previous one time users email keeps coming up. How do I delete their information?

delete off any apps that are asking for the wrong apple id and download/sync them over from the correct one

How can I sync my apps from ipad and iphone to my mac

how can I sync my apps from ipad and iphone to my mac

Follow the instructions here or here. Note that while iOS applications can be stored on a computer, they can’t be run on it.
(115410)

Cannot import vcards into Contacts app from either iPhone or iCloud

Hi all:
My Contacts app is not working. I have no contacts in it after upgrading to Mavericks. The contacts are present on my iPhone and on my iCloud account. When I try to import vcards from iCloud into Contacts, an error message says that there were problems importing the vCards. When I attempt to sync the iPhone, none of the Contacts show up in the Contacts app.
I have reinstalled the Contacts app from the original Mavericks disk. I have attempted multiple third-party solutions. Nothing thus far has resolved the problems with my Contacts app, which as of this writing still contains 0 contacts.
Can anyone help?

Thanks for the suggestion. I just repair keychain as per your input. I also removed passwords for the following:
Apple ID Authentication
Apple Persistent State Encryption
daw.apple.com
I did not see an entry for iCloud specifically.
None of the above resolved the problem.
I noticed something interesting, however: when I attempt to import contacts to my MacBook from iCloud, from DiskAid, or from an app called MCBackup, the Contacts App on the Macbook asks if I want to import Xnumber of cards. It displays two buttons, "Cancel" and "OK." I can click the OK button all day long, and nothing happens. The only viable button is Cancel.
As to reinstalling Mavericks, I have. I've been encountering this problem for the last two months. About a month ago, I re-downloaded a fresh installer and reinstalled. It didn't change anything, and I am loath to go through that hassle again.
More recently, as I mentioned in the OP, I reinstalled the contacts app by itself. It behaves the same way it always has, i.e, not at all working.

Problem importing images into RoboHelp 10 from FM 11

I am using Adobe TCS4, on Win XP SP3, to import or link structured FrameMaker 11 books and documents into RoboHelp 10. Our default graphics types are generally eps and tiff images, in anchored frames and imported by reference into FrameMaker, and FrameMaker equations. When I import a FM document into RoboHelp, things appear reasonably correct, equations are converted to jpegs, but the other images typically do not appear. Instead, blank images are created in the appropriate size, and named <docname>00001.jpg, etc, where <docname> is the original FrameMaker document name.
During import, the Images portion of the FrameMaker conversion settings list "Use Distiller to Generate Image". If this box is checked, RoboHelp nearly always crashes when there are non-equation images in the file. If that setting is unchecked, the import generally completes, but the images, except for equations, are not imported. Remarkably, occasionally one or a few of the correct images doappear in the RoboHelp html; in these cases, it is usually one or more tiff images that have somehow been successfully converted to jpeg; but the majority of images are not converted.
I have tried a few other things, without success. For example, I have replaced all the images in the Framemaker document with jpeg images, then imported into RoboHelp, but the results are the same, with empty renamed images created, and original images not imported. I have also tried reducing the image sizes in the Framemaker to the exact size size required in the output; in other words, so images appear at 100% size in Framemaker. This approach also has not been successful. I have also tried importing to another format in RoboHelp, such as png, with no success.
I have had some occasional success, for example rare occasions when one or two images appear in the RoboHelp html, and a single case in which nearly all of the graphics imported correctly. That FM document is somewhat different from the others because nearly all of the referenced images in FrameMaker were PDF. The successfully imported PDFs were imported into RH as jpegs of the same name. The only files that failed to import were a few eps files which were imported as blank images named aqccording to the <docname>0001.jpg scheme.
Aside from converting all of my images to PDF, and modifying documents accordingly, I have run out of things to try. So, I was hoping to get some advise:
1) Is there another approach I can try?
2) Should I uninstall and reinstall TCS4?
3) Is there an import log that could tell me the mapping of FrameMaker image name to RoboHelp image name, for example: fm0201.tif > <docname>00001.jpg? At least then I could use that list to manually import the appropriate jpgs into Robohelp.
4) Is anyone else experiencing this issue?
5) What is it with the constant crashes when "Use Distiller to Generate Image" is checked. In these cases, Distiller keeps chugging away, producing images, until RoboHelp crashes.
Thanks very much, I appreciate any suggestions.
Chris McCauley

I remember reading that document on images, parts 1 and 2, I think, but did not find any solution to this issue there. I have seen your posts on the path length, and have tried to reduce them as much as possible by moving files close to the root directory. I continue to have issues with cross-references, but I have not spent much time yet in fully diagnosing that problem. I'm experienced with Framemaker for many years, and I'm beginning to feell familiar with many parts of RoboHelp, so I thoiught I'd try to knock these issues one at a time, in either order, actually. thanks for your suggestion.

Removing Apps from Mac and iPhone/iPad

Hi all.
Can someone advise the best way to completely remove unwanted apps please?
The issue I have is that if I remove the app from my iPhone/iPad and then sync my phone with my iMac, the app just gets put back on the iPhone/iPad.
If I remove it from the App library, the app seems to just stay on the iPhone/iPad.
The only way that works is if I manually remove it from the iPhone/iPad and iMac..
Anyone have an idea of a better way, as scrolling through 350-500 apps (twice) to determine which ones I want to get rid of is a little painful.
Thanks all...
Paul.

Hello Paul Bruen,
Thanks for using Apple Support Communities.
You will need to put your device into recovery mode to restore your device to the latest version of iOS since you are currently on a beta version.
Check for outdated or modified software
Related errors: 1015, “The required resource can't be found.”
You might see these error messages if any of these are true:
Your device has a beta version of iOS.
You're trying to install an earlier version of iOS (downgrading).
Your device has unauthorized modifications to iOS, also called "jailbreaking."
Use recovery mode to restore your device to the latest version of iOS.
Resolve iOS update and restore errors
Take care,
Alex H.

Deleted app from itunes and iphone appearing in updates

I have tries to install app 'Prince of Persia: Warrior within' from itunes but cancelled it looking at the app size. But this app appears in update section when I click 'itunes download available' or if I click download all apps. Again, it is also happening for one more app which I installed and deleted ('Capcom Arcade') but again it appears in download section and starts to download automatically.
I am really frustrated with this activity as I have to always check that itunes is not automatically downloading these applications other wise it consumes by internet bandwidth (both apps are more than 500 MB of size).
Please provide a solution or help me with any tips on this.

To completely remove an app from iTunes & your phone, do this: Right-click the app in your iTunes library, select delete, when prompted, move all files to trash, empty your trash, connect your phone, if prompted that there is purchased content on your phone not in your iTunes library, decline to transfer, hit the sync button. The app and all of its data will be gone.

Intermittent problems importing images into Captivate 5 from PowerPoint 2010 slides

Occasionally, when I import slides from a PowerPoint 2010 pptx file, certain of the images don't move over into captivate.
Most (if not all) of my images have been saved as .jpg files, so I don't believe that there would be problems with different file types. Some of the images may be saved at different quality levels; could this possibly affect the import process?
I can't identify what about these images somehow mark them as "different" to Captivate, and therefore prevents their importation.
Any help that can be provided is appreciated.

Hi Rahul,
I would but I am not the original poster. You will have to wait for JDPJDPJDPJDP to send you the file.
Best regards,
Mark

Random sync problems importing aaf into After Effects from Avid

The source footage is 23.98 H.264. The Avid is importing DNX36 and editing in a 23.98 timeline. When the AAF is brought into After Effects the clips are all there but the sync drifts and in some cases is randomly more out of sync than other clips.

Thanks Rick and Mylenium
Thanks that worked!
I thought that changing the frame rate in the composition settings would have worked.
Instead what I should have done is to go the the footage in the Project Panel then right-click on the footage > Interpret Footage > Main... then Conform to frame rate: Frame rate: 23.986607 (or whatever more accurate frame rate your footage actually is)
I used the more accurate frame rate reading from VLC which went to 5 decimal places. I got that info from the top menu in Tools > Codec Information
Its a shame AE doesn't pick up on the more accurate fps. It seems that all the videos from my iPhone 4 have slightly different frame rates and I guess I will have to interpret each clip properly.
I hear that the frame rate on the iPhone 4 is different depending on the lighting? I wonder why that would be the case?
Hope this helps anybody else that might face this problem.
Cheers

Why do downloaded photos to Mac IPhoto from IPad and IPhone omit some photos?

Photos sent to I-Mac I-Photo from I-Phone and I-Pad (via the Cloud) don't all come through. A number of them don't make transition.
Also, when downloading from the cloud, the photos arrive in I-Photo as though sent at different times. Clicking on PHOTOS in the source column will show most (but not all) of the downloaded photos with the same date and time but broken up into different lists. It is though the cloud download hesitates a few moments, and when transmission resumes, I-Photo starts a new Photos list.
Comments?

Trouble With Syncing Mac Photo Stream to iPhone

How do I tell iphoto NOT to load ALL images from camea and iphone, only new images?

I've bee using my MacBook Pro, iphoto and Nikon for many years. I travel alot and take many pictures, and like to keep them on the memory cards as an extra backup. All was going great on a recent trip, until one day, suddenly, when I plug camera into computer, iphoto opens (as usual) but it starts downloading ALL of the old images on the memory card instead of just the ones that have not already been imported! It takes forever when you are using a 16GB card!! Is this due to some update I installed? How do I tell iphoto not to do this?! I only want to see images not yet imported, as it used to be. I am using OS X 10.6.8 and iphoto '09 - 8.1.2 And, this same thing is happening with my iphone, and my other camera.

iPhoto does read all images (how else can it know if it has already imported them or not) and then gives your oppertunity to import new, all or selected
Yes it does take a bit to get all images and see what needs to be imported - I use 32 GB cards - and the other issue is that if you delete impoprted photos next time you use the card the deleted ones will be in the new list so you have to select the rest and import selected - I've found no solution to this
LN

I loaded my ipad photos from camera and all the pictures sorted by date. Next, I did a sync with my computer and the photos were all reorganized into IMPRT folders an out of date sequence. Any idea how to put the photos back into date files?

I loaded my ipad photos from camera and all the pictures sorted by date. I later sync my ipad with my computer and the photos were all reorganized into IMPRT folders an out of date sequence. Any idea how to put the photos back into date files other than reloading all of them from camera?

What version of iPhoto?
Select one and rotate it. Then rotate it back. Does that make it appear?
A much better work flow is the keep the photos after importing. Check the success the import, wait for at least one successful backup cycle then use you camera's format command to reformat the card
LN

After I import the photos into light room from a folder, the deveop module cannot be accessed? What can I do to process those photos that are on my hard driive?

After I import the photos into light room from a folder, the deveop module cannot be accessed? What can I do to process those photos that are on my hard driive?

If you are using a standalone version of Lightroom, you may have updated with the CC-licensed update. That will not work. If this is your situation then it will be necessary for you to uninstall Lightroom and then install an update from a different website. Assuming that you are using Lightroom 5, this is where you need to download from:
Product updates
After you make the change you will be able to continue from where you left off. The switchover does not affect your images or your catalog.

How can I transfer photos from my comp to my ipad2.I have the connection kit and can transfer photos that are direct from camera BUT if I transfer photos from comp to card it will not recognize them ????

how can I transfer photos from my comp to my ipad2.I have the connection kit and can transfer photos that are direct from camera BUT if I transfer photos from comp to card it will not recognize them ????

To sync photos from a Mac or Windows PC to your device using photo applications
Make sure you have the latest version of iTunes installed.
In iTunes, select your device's icon in the Devices list on the left.
Click the Photos tab.
Choose "Sync photos from."
On a Mac, choose iPhoto or Aperture from the pop-up menu.
On a Windows PC, choose Photoshop Album or Photoshop Elements from the pop-up menu.
Note: Some versions of Photoshop Album and Photoshop Elements don't support collections. You can still use them to sync all your photos.
If you want to sync all your photos, enable the option for "All photos, albums, events, and faces." If you want to sync photos from only some albums, events, or faces, enable the option for "Selected albums, events, and faces" and then select the albums you want. If syncing on a Mac with iPhoto version 6.0.6 or later, you may enable the option to "Include videos" to sync videos directly from iPhoto to your device. (Requires iOS 3.0 or later).
Click Apply.
To sync photos from a folder on your hard disk to your device
Drag the images you want into a folder on your computer. If you want images to appear in separate photo albums on your device, create folders inside the main folder and drag images into the new folders.
In iTunes, select the device icon in the Devices list on the left.
Choose "Sync photos from."
Select Choose Folder from the pop-up menu and choose your main image folder.
Click Apply.

When I back up my I phone 5s or my ipad2 camera roll, contacts and documents does this save in the cloud all to view even if a photo has been removed from camera roll?

When I back up my I phone 5s or my ipad2 camera roll, contacts and documents does this save in the cloud all to view even if a photo has been removed from camera roll?

iCloud- Photo Stream FAQ
iCloud- Photo Stream limits
iCloud- How to delete photos from Photo Stream
iCloud- Photo Stream troubleshooting
iCloud- Using and troubleshooting Shared Photo Streams
iPhoto '11- Add, remove, and edit photos in a shared photo stream
iPhoto '11- Create a shared photo stream
There are obviously limits to what can be stored in Photo Stream and for how long.
If she wants backups then she will need something like this: Seagate Wireless Plus.

Problem importing photos into photos.app from camera and iPhone

Similar Messages

Maybe you are looking for