Problem importing PST files through Exchange Control Panel

Trying to do what is best here - we have a migration and everything is coming into EX13 from a PST file.
In the ECP I already added the role to allow PST Imports but some of them just fail with no error or explanation. Just a red alert underneath the bell:
Nothing more than that.
Can't seem to find a status queue to see the PST's process either.
Stranger than that is when I see the "failure" all the email looks like it is there - regardless of 1 item or 20000 items they all look like they have in fact been imported to Exchange.
Any ideas on any of this?

Hi Mr.Donowitz,
Is there any error event in the Event Viewer?
"some of them"
Could you please try to use cmdlet to import the affected pst file to another mailbox to test?
New-MailboxImportRequest
http://technet.microsoft.com/en-us/library/ff607310.aspx
Frank Wang
TechNet Community Support

Similar Messages

I tried repairing iTunes through the control panel but there is a new message that "the file 'itunes library.itl' could not be read because it was created by a newer version of iTunes"

I tried repairing iTunes through the control panel but there is a new message that "the file 'itunes library.itl' could not be read because it was created by a newer version of iTunes"

Unless you deliberately downgraded iTunes this may be a sign of a corrupt library. See Empty/corrupt library after upgrade/crash.
tt2

Firefox 6 will not load when I click the icon. I have tried to uninstall it, both through the control panel and geong straight to help.exe. In both cases nothing happens. How do I uninstall this program?

Firefox 6 will not load when I click the icon. I have tried to uninstall it, both through the control panel and going straight to help.exe. In both cases nothing happens. How do I uninstall this program?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Bad item limit when bulk importing pst-files

Hi,
Im about to to bulkimport pst-files into exchange 2010 and I know that some of the pst files have corrupt items i dont want the import to fail. How do I configure the -baditemlimit when i bulkimport pstfiles? Do I just write -baditemlimt after
the powershell command as you do on an single pst/mailbox import? Need suggestions.
Thanks

Hi
Yes you do
http://technet.microsoft.com/en-us/library/ff607310.aspx
Ex: New-MailboxImportRequest -Mailbox Ayla -FilePath \\SERVER01\PSTFiles\Recovered.pst -BadItemLimit 10
The valid input range for this parameter is from 0 through 2147483647.
Jonas Andersson | Microsoft Community Contributor Award 2011 | MCITP: EMA 2007/2010 | Blog:
http://www.testlabs.se/blog | Follow me on twitter:
jonand82

Import PST files for multiple users at the same time?

While importing PST files into archive mailboxes, the Exchange 2010 mailbox server went to 100% CPU and memory usage and I could not stop the imports because the EMS stopped responding. We had to restart the whole server to get back to normal.
Not sure if importing PSTs was the cause of it it was a coincidence. We have done imports the same way before without this issue.
How many PST imports can be done at the same time and how do we queue up multiple users and have the mailbox imports have unique names for each user? I noticed they are always called MailboxImport and MailboxImport1 and then it starts over as MailboxImport
again for additional users. So, if more than one user's PSTs are being imported at the same time, we will have multiple identically named imports running.
We would like multiple users' PST imports to queue up and start automatically when the previous users' imports complete.

Please try like this. Rename folder name same as alias. i.e. \\server\share\<alias>. below are examples.
"\\server\share\jsmith"
"\\server\share\tjones"
"\\server\share\rsmith"
"\\server\share\bspears"
"\\server\share\mmouse"
And run below command to take PST from the corresponding
foreach ($i in (Get-Mailbox)) { New-MailboxImportRequest -Mailbox $i -FilePath "\\Server\share\$($i.Alias)\$($i.Alias).pst" -baditemlimit 50 -acceptlargedataloss ;while ((Get-MailboxImportRequest -mailbox $i | ? {$_.Status -eq "Queued" -or $_.Status -eq "InProgress"})) { sleep 180 } }
If a folder missing with the alias you will see an error similar to this.I think this will work for you. You just keep only the required PST folders to import in the "\\Server\share" folder.
"Unable to open PST file '\\server\share\mmouse\mmouse.pst'.
Error details: Could
not find a part of the path '\\server\share\mmouse\mmouse.pst'.
+ CategoryInfo : NotSpecified: (0:Int32) [New-MailboxImportRequest], RemotePermanentException
+ FullyQualifiedErrorId : 27802833,Microsoft.Exchange.Management.RecipientTasks.NewMailboxImportRequest"
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

How to Import .pst files in Mac mail?

I am finding a solution to import .pst files in Mac mail.
In other and simpler words, I am tryng to transfer emails from ms outlook 2007 that supports .pst files to mac mail of mac operating system.
Also it will very helpful if I can get solution for transferring contacts and calender work along with the above asked question.
Eagerly waiting for the solutions.
Thanks

do it with the help of import-export wizard. Here goes the steps for youhttp://www.trickyways.com/2010/08/how-to-transfer-emails-from-outlook-to-apple-m
ail/
Your best move would be if you search for your problem on some search engine
that you use.
Typing "Convert
Pst To Mac Mail" will land you in several solution.
Or you can simply visit apple online store for this problem have a look:
https://itunes.apple.com/in/app/pst-con
... 1009?mt=12
Hope this helps

PST Capture error when trying to import .PST files

I am currently migrating mailboxes from Exchange 2010 to Exchange 2013 on prem. I have installed PST Capture 2.0 and 64-bit Outlook 2013 on a Windows 2008 R2 machine and have installed the PST Capture 2.0 agent on a workstation that has some .pst files
on it. PST Capture finds all the .pst files on the workstation, but when I use PST Capture to try to import PST files into a mailbox on Exchange 2013, I get the error "Import error: Error opening mailbox [email protected]".
I created a userID with a mailbox to run PST Capture. Based on the instructions at
https://technet.microsoft.com/en-us/library/hh781035%28v=exchg.141%29.aspx I have made that user a member of the groups that are assigned the Public Folder Management role, the Mailbox Import Export role and the Organizational Management role. The
user is also a local admin on the machine running the PST Capture console. While the error sounds like a permissions issue, these are the only permissions I could find documented for PST Capture. I am starting PST Capture with "Run as administrator"
Any ideas why this isn't working? Are there any other permissions that the PST Capture user needs? Is there anything else I need to do?
Thank you very much for your help.

Generally PST capture tool allows you to search for PST files & import these PST files
to the mailboxes but as your account is not getting connected, so you need to check settings of your PST Capture tool :
https://technet.microsoft.com/en-us/library/hh781032(v=exchg.141).aspx
If this solution does not work out for you, then I would advise you to use any professional
tool for exchange migration like CodeTwo , Stellar. From my personal experience, I would recommend you to go for Stellar Mailbox Extractor for Exchange Server as it migrated my mailboxes to another Exchange Server in quick time.

Photos uploaded through icloud control panel are only synced with iphone but not with ipad

Photos which are uploaded through icloud control panel are only synced with iPhone but not with iPad. Photos taken with iPhone or iPad are synced with all devices. So, why I do not get the uploaded photos from my pc to iPad? I alredy disabled photo stream on all devices - same failure

If only one device is not getting updated data, you need to troubleshoot that device and not photostream itself.
Verify that ipad is connected to wifi, charged over 20 percent, camera app is closed and take a photo of the screen (or anything else, but then close that camera app).
Open photostream folder on that ipad and see if picture shows up. If you network is good, should not take long.
Don't forget that while your phone can use wifi and cellular (even it suppose to use wifi for photostream, cellular networks got much better since original photostream was implemented) - you ipad is probably wifi only.
If picture shows up - you ipad and photostream have no problems and you can go to other devices one by one.

I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I want to unistall through the control panel it doesn't let me, anyone knows how to uninstall it??

I can't install correctly Adobe Captivate 8, cause a message of no connection to internet appears (I am connected to internet). Even though, when I try to unistall through the control panel it doesn't let me, an Uninstall Failed message appears, anyone knows how to uninstall it??
I've already tried Adobe Cleaner Tool, but it doesn't work, as the program is not listed as one of the proposed
Does anyone know how to uninstall it??
Thank you

Which are you after... installing Captivate 8 or uninstalling it (whatever "it" is)?
Sign in, activation, or connection errors | CS5.5 and later
https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

Problems importing .mov file

I am all of a sudden having problems importing .mov files from my camera in iPhoto '08. Can't get them to import in Image Capture either...On the import preview screen, all that comes up are empty "boxes". If I highlight one of the boxes, it shows that it is .mov file, the size of the file, etc. but if i try to do the import, iPhoto just locks up.

iPhoto does not like very large movie files for importing directly from the camera. If you get it on the desktop you should be able to import it. I've imported 200MB movies with no problem.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Problems importing raw files into Lightroom 3.4

I've just dowloaded lightroom 3.4 and now I'm having problems importing raw files into lightroom. I havent had a problem before. Can anyone help me? My camera is a Nikon D7000.

Perhaps a few more details are required. Take a look at the FAQ "How to get help quickly"

How to import *.dmp file Through Oracle SQL Developer (3.2.20.09)

hi
how to import *.dmp file Through Oracle SQL Developer (3.2.20.09) ?
how to do it ?
thanks

You do not.
.dmp files are created from our Export and Data Pump database utilities and are proprietary files. You use the corresponding Import (or Data Pump) utility to import the data.

Im having problems importing prores files at correct frame rate

im having problems importing prores files at correct frame rate. they have been converted to prores at 25fps but on importing they appear in fcp as 30fps. any help would be appreciated.

I don't know anything about Wondershare. But it seems something may have got messed up in the conversion. Or maybe there is an identifier on the converted clip that has FCP confused and it really is 25 fps.
To begin, your sequence settings don't match your clips. You want a Pro Res sequence. Let FCP set this automatically by dragging a Pro Res to an empty sequence and when gives you a message asking whether you want the sequence to match the clips, click yes. Then hit command 0 again and see whether the frame rate is set at 30 or 25.
If it really is 30, then it will need to be converted and re-imported. It can be done in Compressor or in Cinema Tools. If you have used Cinema Tools before, great. Of not, I'll defer to others because it's been a while and I don't want to mess you up.
Good luck.
Russ

Have AE7; Problem importing prproj file into pc; get placeholder instead. What do I need to do to open up the video files here. They are .mov in quicktime.

Have AE7; Problem importing prproj file into pc; get placeholder instead. What do I need to do to open up the video files here. They are .mov in quicktime.

Please be more specific. What Premiere project? What version of Premiere? Which operating system? What CoDecs do the QT fiels use? Are all the video files in the correct folders inside the Premiere project structure? Your description sounds like you are attempting to open a Mac based project on a PC and your video files are either in the wrong location or use a Mac-specific CoDec, hence they cannot be read on a PC.
Mylenium

Dear Team, Can we secure "sent msg" that the receiver cannot edit while forwarding/replying? Is possible to import .PST file(S) into thunderbird?

Dear Team,
Can we secure “sent msg” that the receiver cannot edit while forwarding/replying?
Is possible to import .PST file(S) into thunderbird? If yes, any size limit?
Can we convert thunderbird data file in .PST?

I don't think you can prevent email body text from being copied and edited.
You'd probably need to created a protected Word or PDF document, and send it as an attachment.
This is still some sort of guessing because it's still not clear to me what exactly your scenario is.
Whatever text you send in an email, regardless of whether in the body or as an attachment, the recipient will always be able to use that and distribute it further, e.g. by making a screenshot. And images can be 'photoshoped' as well.
If you want the recipient to be able to detect whether a message or an attachment has been altered on transit, you'd need to sign it.

Problem importing PST files through Exchange Control Panel

Similar Messages

Maybe you are looking for