Problem importing sound into flash CS4

hi guys!
so i've just been learning flash and i'm really enjoying it,
i have got to a point when i want to import sound but when i do. i
get the following message...
"one or more files were not imported because there were
problems reading them."
i am using windows xp and i have had this problem trying .aif
and .mp3. (i haven't tried any other types but i think these should
work anyway)
does anybody know why it isn't working? is it because i don't
have the latest media players that flash uses? if so do you know
which media player i should have? or is it something else?
i would really appreciate your help on this one... thanks in
advance.
silverlulu

Install latest version of Quicktime
If using Soundforge save as
80 kbps, 22,050 Hz MEDIUM quality
(important, won't work with High uality)
Stereo Encoding pick "Stereo" as the
default "joint stereo" won't work!
Then you're okay

Similar Messages

Importing Images into Flash CS4 from Photoshop 7

Hello,
I've created an image in flash, basically the image is a ring which has then been divided into 3 equal segments, each segment exists on its own seperate layer with and has a transparent background. I want to make ach of these segments into a button on flash, so I've imported them across and converted them into buttons, however the problem I have is that when it gets imported into flash, it creates a box around each segment which is what flash sees as the full button, this means when you roll over a blank piece of the segment flash recognises it as rolling over the button. Is this just an inherent problem from importing from photoshop into flash or am I doing something wrong?
Thanks
Sean

Check the settings:
Edit/Preferences.../PSD File importer...
And then load the *.psd file without the background.
And certainly there is no change in flash...

Problems importing sound

I'm trying to import .aiff (22.050 24bit) into the Director Cast, but Director (12) keeps crashing while importing them. I intially did a batch import, but am now importing them one at a time - a couple have imported, but I'm having to force quit Director and try re-importing several times before I can import a file. Has anyone else had problems importing sound into Director 12?

24 and 32 bit audio are not supported. Try 16 bit:
http://helpx.adobe.com/director/using/publishing-ios-devices-using-director.html

Sync and frame rate problems importing video to Flash CS3

Just like the subject states, I am indeed having frame rate problems importing video to Flash CS3.
When I export a video from Premiere with the settings:
1280x720
frame rate of 23.976
using H264 or Animation (basically every codec produces the same results),
"embed video on SWF and play in timeline"
When I do this the file exports fine. Playing it in Quicktime works fine and the audio syncs up no problem. But when I import it into Flash using the same settings, for some reason the movie clip is now too fast in that the video does not match the audio and seems to be at more like 12 fps now (just a guestimate). The action of the video is over long before the audio even comes in.I have verified that the frame rate is correct in Flash so it's not that.
I've done this literally hundreds of times in the past and suddenly it does not work and I can not figure out why. I'm not even really using video, but actually artwork that I am putting together as an animatic for an animated piece so the video could not have been imported incorrectly or digitized wrong either. Can someone out there please tell me how to make this work? Any help would be GREATLY appreciated!
-Mike

Thanks for you quick response however it really doesn't apply to what I am doing in any way. I will not be uploading the video to a server. I am using the imbed function so I can use it as a layer and then animate over it. It is just reference and will ultimately be deleted. The Fla file does indeed carry the same specs as I stated in my first post. I have done it this way dozens of times and I am trying to figure out why it suddenly will not work.
~Mike

Importing mp4 into Flash 8, converting to FLV

I just finished taking a Flash Video class where I understood
I could import an MP4 and convert in to an FLV using encoding tools
that come with Flash Professional 8. However, I opened a new FLA
just now and tried to import an MP4 (File -> Import Video),
Flash would not recognize the sample MP4 I have sitting on my
desktop.
I downloaded a demo copy of On2 FlixPro and it did recognize
the MP4, is converting it to an FLV as I write this.
Did I misunderstand about importing MP4s into Flash 8
Professional? Is it in fact not possible. Or might there have been
something I didn't do or didn't do correctly before importing? If
so, what might it have been?
Thanks in advance.

chris_whalen,
> I opened a new FLA just now and tried to import
> an MP4 (File -> Import Video), Flash would not
> recognize the sample MP4 I have sitting on my
> desktop.
The MP4 file extension does not appear in the filetype
filter of the
Import dialog, but if you select "All Files (*.*)," that
should work. I've
imported MP4s (they're MPGs, after all), but the extension
doesn't appear
under the "All Video Formats" choice. (I'm hoping this is
what you mean by
"would not recognize," anyway.)
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design."

Importing sound into Premier Pro CS3

I have a Sony HDR-XR100 HD video camera. It saves files with an .m2ts extension. This extension is not supported by CS3. Using Sony's PMB (Picture Motion Browser), I convert the .m2ts files to .mpeg2. When I import these files into Premier, they appear, but have no audio. How do I import the audio? Thanks.
David

I put it in the main Premier folder, presumably like you did, and it worked. I'm not real familiar with Macs, but the folder I put it in was "C:\Program Files\Adobe\Adobe Premiere Pro CS3". There are several other files there with similar names. If that doesn't work, I'm lost, since obviously I had to come here for help myself :).
David
Date: Fri, 23 Jul 2010 19:40:24 -0600
From: [email protected]
To: [email protected]
Subject: Importing sound into Premier Pro CS3
Hey, I'm using CS for Mac and I'm having the same issue , importing .mpg into PPro and get no audio.
I found the ad2ac3dec.dll file online but I'm not sure what folder to place it in. I've found the folder named Adobe Premire Pro CS3 and just pasted it into that but it didn't work.
My camera only records in .mpg and I really don't want to spend money on a converter after spending a bucketload for CS3...
Any help would be much appreciated!
>

Import Snippets into Dreamweaver CS4

Have searched in Help and not able to find out how to import
snippets into DW CS4 from DW CS3. Can someone help me with this?
Thanks,

Hi guys,
I have upgraded from CS3 to CS5. The snippets folder IS in the configuration folder for CS3,
but not the needed subfolder within the snippets folder with all my stuff in it?
There is no ApplicationData path for on my machine either. I have WPXPro.
Why not just create an import function.
help.

Importing movie into Flash

Does anyone have any knowledge of importing movies into
flash?
I have a movie streaming in my flash file but when some
people open the exe they only see black when the movie should be
showing. And some others can see the movie. Any thoughts?

you can import them as an image sequence, then create a movie
clip out of it. File-->import-->import to stage.. Then select
all the images, and it something should pop up asking if you are
trying to create an image sequence, select yes.

Importing images into Flash

I am importing images into Flash only to discover that the images (1280 x 720) are not centered on the stage. Most of the time the images are off centre by a few pixel widths or in some cases by an inch or more. I can't get them to centre unless I clear the stage and import a few times.
Is there a way to import and have the images framed perfectly within the stage.
I'm currently using Flash CS5.5
Thank you.

You can also click the two blue boxes icon under the Timeline and then drag select the whole timeline and that will let you select all your frames at once. then just position them all where you want them at the same time. I attached a screen cap of the area I'm talking about. It's right after the two white boxes.

Problems importing images into Livecycle Designer 8.0

Hello all,
Recently, I have been having problems importing images into the livecycle forms. I put in the image field and link the image but it would just show a broken link symbol. i usually edit the image in photoshop and save as a jpeg. I can't figure out why Livecycle takes some images but not others.
Please help anyone

Never mind, I figured it out, have to save files in RGB format, not CMYK

Having a problem importing xml into an indesign template.

I am having a problem importing xml into an indesign template. The xml data is there and will populate the columns on the document but I am having problems matching styles, removing data that should not be mapped and importing repeated same fields but differnet data.
Message me if this is something you can do quickly for a fee.

Also you can check the following link
[Reporting|http://devlibrary.businessobjects.com/BusinessObjectsXIR2/en/devsuite.htm]
Regards,
Tej

Importing video into Flash MX2004

Hi
I've not worked with video before, but now have a requirement
to use a video clip in a Flash movie. I have found a royalty free
movie clip which is perfect, but would need to work over the top of
this file to add some bits to the movie.
My question is this, if I purchase the movie and import it
into Flash, does it come in frame-for-frame on the timeline so that
I can add layers and work over the top of it? I know that video
tends to create large files - once it's in Flash and published as a
swf file, presumably it should be more manageable?
Many thanks for any help.

HamptonCaught wrote:
> Hi
>
> I've not worked with video before, but now have a
requirement to use a video
> clip in a Flash movie. I have found a royalty free movie
clip which is perfect,
> but would need to work over the top of this file to add
some bits to the movie.
>
> My question is this, if I purchase the movie and import
it into Flash, does it
> come in frame-for-frame on the timeline so that I can
add layers and work over
> the top of it? I know that video tends to create large
files - once it's in
> Flash and published as a swf file, presumably it should
be more manageable?
It won't be frame by frame, it will be its own format
stretching across timeline
to covert the length of its frames.
Best Regards
Urami
Beauty is in the eye of the beer holder...
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Couldnt Import .MP3 into Flash CC

I am exporting a .MP3 from Adobe Audition CC
Then Importing it into Flash CC
I receive the error message Couldnt Import .MP3
This procedure has worked in the past but now does not work. If you know what may be the issue please let me know
Thanks

There was an older issue with Flash CS6 where any MP3 with a bitrate over 192kbit could not be imported unless both QuickTime and iTunes were installed to the latest version (on Windows). Do you also have iTunes installed and updated?
I don't think anyone got to the bottom of why iTunes was needed but many people couldn't import MP3 with the same error until they did. You might want to try that.
The only MP3 workaround was to import directly to library instead of stage and play it in a timeline layer, but some could only hear it during published playback (no preview).
Of course an alternate workaround is to simply use a different format. There's still something going on with MP3, which is a bit surprising considering how common it is. I would recommend trying WAV or AIFF as a workaround for now if iTunes/QuickTime updating doesn't fix it.

Problems with sound in Flash

I recently updated a sound file in a flash movie. I had some aif files that I updated with a mp3 sound file. Within my movie there is a script for a replay button. It plays back fine when I play it, but when I press the replay button, it doesn't replay the sound, only the movie. Hope I'm making sense, any ideas why I get no sound when I replay the movie?

Sorry about that, I'm a bit of a newborn at this so I may say something stupid from time to time.
As I said, "nav" is the image for the replay button
The code for level0 is this
_level0.doTimer();
The rest of the code is
_level0.controlsDisabled = true;
//as : Frame 1299
stop();
// what's nav. is that the movieclip the "replays"?
nav.play();
// what's _level0.doTimer() (copy and paste that code)
_level0.doTimer();
_level0.controlsDisabled = true;
From: kglad <[email protected]>
To: Ashton Matthews <[email protected]>
Sent: Tuesday, July 5, 2011 10:16:34 AM
Subject: Problems with sound in Flash
i didn't suggest any code. i only posted questions and you answered only one and that answer didn't help.

Problems importing into flash CS4

Hello everyone!
I am attempting to export a captivate project over to flash CS4. However when it goes from captivate over to flash the result is basically a slide show. It does not show any of the animations that are present in Captivate. I also keep recieving an error message.
I have searched for how to solve this problem for quite a while now and so far have come up with nothing.
This is the error message that flash gives me:
The following elements in your project have not been converted. They are not supported by this importer.
508 Compliance
A swf animation slide has been imported. The following files must be made available at publish time:
Project01_slide_22_0.swf
DefaultPreloader.swf
Please make sure you publish the project to “C:\Documents and Settings\jmillard\Desktop.” Saving the project to this directory will ensure that test project will work with the swf animation slides.
Unfortunately I am on a tight schedule to get this project done and the Captivate 4 and Flash CS4 I am using are both 30 day trials, so I am in quite a hurry.
If you could please help me I'd greately appreciate it!

Check the settings:
Edit/Preferences.../PSD File importer...
And then load the *.psd file without the background.
And certainly there is no change in flash...

Problem importing sound into flash CS4

Similar Messages

Maybe you are looking for