Problem Importing Sound With Video

I'm trying to import a quicktime file into Flash 8 basic and
I'm having a problem with the file's audio track. The video comes
through fine but the audio won't import with it. I've tried
bringing the file in as an embedded video and a movie clip,
importing to stage, importing to the library, integrating the audio
track, making it separate. Every time I check the audio box in the
properties bar all it says is "none." I'd try that linked Quicktime
video option but my Flash doesn't support it. I can only embed the
video in SWF. Any ideas about what's going on and how I can fix it?

Could be that the audio format or resolution/bitrate is
unsupported. Probably the easiest solution is to just convert the
QT file to AVI before importing it.

Similar Messages

Why can't I import sound with video into iMovie from digital camera?

This is disturbing. I have a digital video camera that took great video + sound. I import into iMovie (using my DV cable that came with the camera) and get video but no sound.
Now, in the past the sound came in, but no longer. Any and all advise is requested. I have to make number videos of lectures starting Wednesday evening and have to be able to provide video with audio.
Thanks.

Try importing video shot with the camera's internal
microphone. If that doesn't work either, the mic is
not the problem.
I have no problem importing sound with video when using the internal video camera mic. No problem (other than sound quality issues with the speaker being 40 feet away from the camera's internal mic!
But I can play back the video made with the external mic in the camera and the sound is stunningly clear, crisp and loud. It's just a matter of getting it out of the camera into my Mac. I don't think it's the microphone; it must be the computer.
I just find it sad to believe that Apple's software is so limited--even in Final Cut Express HD.

Problems importing AVI with DV codec to Premiere Pro

Problems importing AVI with DV codec to Premiere Pro (720x564 px, 32 kHz stereo, 24.4 bitrate)
I can't import that video. What can I do?

Svanur,
I agree with Harm. The specs. do not match up correctly. Where did those AVI files come from?
I assume that you are working in PAL-land (and not NTSC-land). Is that correct?
What platform are you working on, Mac, or PC?
When you attempt to Import those AVI files, what is the exact error message that you are getting?
Good luck,
Hunt

Problems importing sound

I'm trying to import .aiff (22.050 24bit) into the Director Cast, but Director (12) keeps crashing while importing them. I intially did a batch import, but am now importing them one at a time - a couple have imported, but I'm having to force quit Director and try re-importing several times before I can import a file. Has anyone else had problems importing sound into Director 12?

24 and 32 bit audio are not supported. Try 16 bit:
http://helpx.adobe.com/director/using/publishing-ios-devices-using-director.html

How to combine sound with video to an AVI Using IMAQ?

I need to combine sound with video I capture and write it out as an AVI. Is there anyway in Labview to combine sound with and AVI? Or an easy to use third party product?

Hello,
The AVI tools that are provided with Vision allow for data to be added to your video. Sound information can be stored this way, but if you are looking for a way to add audio support to your video (such that it will play the sound file when the video is played in Windows Media Player or other applications) you may want to look into finding a shareware or freeware product that can accomplish this. LabVIEW does not have tools specifically targetted to this operation.
Good luck,
Robert

Problem in working with Video

I have problem in working with Opening and editing video
When I tried to open :
Could not complete your request , because it is not right kind of document [ for every format of video ]
When I import as video :
it creates as many layers as there are frames in the video
Please help
Thank you

Video is like Image formats, but on steroids. Also, many formats, such as AVI can have 100's of different CODEC's inside them. It is almost like having a JPEG, that contains a TGA, or a TIFF, or a PCX, or any number of what we see as other formats. It can be daunting, but let's start at the beginning.
For a discussion on formats, such as AVI, MOV, WMV, etc., see this article: http://forums.adobe.com/thread/440037?tstart=0
As CODEC's are the "building blocks" of AV files, this article is good too: http://forums.adobe.com/thread/546811?tstart=0
As you see from that first link, the format is just a "wrapper," and can contain all sorts of "stuff." That FAQ Entry will tell you how to "peek inside" the wrapper. That is what we need, as Mylenium asks. If you can let us know all about the faulting files, maybe someone can help you.
Also, PS has somewhat limited Video support, both on Decode and Encode, so, and depending on what you have, you might have to convert that/those file(s).
Good luck,
Hunt

Sound with videos on ipod 60gb

Alright, so when i first bought this ipod, the sound worked beautifully. I converted my files to mp4's and they everything was butter. But when i updated the software, the sound stopped working so well. Now it only plays the first 30 seconds or so with sound, then it freezes and stops playing sound, but the video still plays. I figure that its the software, but i really dont feel re-setting factory settings and having to re-download all these songs and videos. Has this happened to anyone else, and if so, how did you fix it??? THANKS
60 GB iPod video Windows 2000

Yes I can confirm the same problem with my ipod after upgrading to firmware 1.1 (for the radio remote control support). With my ipod the problem consists only with longer movie files. Short files, such as musicvideos are played with out problem but a movie has the described "30 seconds with sound - freeze - rest without sound" problem!! Very interesting for me: sometimes, after restarting the movies several times the movie continues to play without problem (in average in 1 of 9 cases ) - looks to me as a timing problem.
I really do hope that Apple is solving this annoying issue immediately, since otherwise they will not sell any radio remotes
Pentium 4 Windows XP

Importing sound with a player

This is being much harder than I was led to believe…
I wanted to add a sound file to a SWF file with a simple player that would let users control the sound like a movie file.
According to the help files: "You can import an FLV file or F4V file with sound only and no video. A sound-only video file can be controlled like other videos. Use this method to control the playback of large sound files, such as narration or soundtracks."
Great.
Now how do I turn an mp3 into a FLV or F4V file?
Thanks!

Hi Niles,
You can use the Adobe Media Encoder, which is installed with Flash Catalyst, to convert MP3 files to FLV or F4V. The help for Adobe Media Encoder is here: http://help.adobe.com/en_US/mediaencoder/cs/using/index.html.
Thank you for pointing that out, I will add a link in Flash Catalyst's help to highlight this. Feel free to comment directly on pages of help whenever you find information unclear, your feedback helps us constantly improve our learning content. Thanks for posting!
-Kim Isola

Problems importing iPhone 4 video into After Effects CS5 - Audio sync out

Hi there,
I am currently experiencing problems trying to import iPhone 4 video into After Effects CS5.
Firstly i'd like to note that the video plays perfectly fine on the iPhone, VLC and in Quicktime Player. The audio and video is in sync.
When I add the footage to After Effects the video becomes slightly out of sync with the audio. I have noticed this in RAM preview and also in renders I did just to test.
I also want to note that, both my iPhone and After Effects have latest software updates.
Thanks for your help

Thanks Rick and Mylenium
Thanks that worked!
I thought that changing the frame rate in the composition settings would have worked.
Instead what I should have done is to go the the footage in the Project Panel then right-click on the footage > Interpret Footage > Main... then Conform to frame rate: Frame rate: 23.986607 (or whatever more accurate frame rate your footage actually is)
I used the more accurate frame rate reading from VLC which went to 5 decimal places. I got that info from the top menu in Tools > Codec Information
Its a shame AE doesn't pick up on the more accurate fps. It seems that all the videos from my iPhone 4 have slightly different frame rates and I guess I will have to interpret each clip properly.
I hear that the frame rate on the iPhone 4 is different depending on the lighting? I wonder why that would be the case?
Hope this helps anybody else that might face this problem.
Cheers

Problem importing sound into flash CS4

hi guys!
so i've just been learning flash and i'm really enjoying it,
i have got to a point when i want to import sound but when i do. i
get the following message...
"one or more files were not imported because there were
problems reading them."
i am using windows xp and i have had this problem trying .aif
and .mp3. (i haven't tried any other types but i think these should
work anyway)
does anybody know why it isn't working? is it because i don't
have the latest media players that flash uses? if so do you know
which media player i should have? or is it something else?
i would really appreciate your help on this one... thanks in
advance.
silverlulu

Install latest version of Quicktime
If using Soundforge save as
80 kbps, 22,050 Hz MEDIUM quality
(important, won't work with High uality)
Stereo Encoding pick "Stereo" as the
default "joint stereo" won't work!
Then you're okay

Ni sound with videos

hi, I just started with my new Ipod but i got no sound with my videos. I see the posts here and try different convertions but nothing seems to be useful. any advice someone? they're all in m4v. thanks.

Yes I can confirm the same problem with my ipod after upgrading to firmware 1.1 (for the radio remote control support). With my ipod the problem consists only with longer movie files. Short files, such as musicvideos are played with out problem but a movie has the described "30 seconds with sound - freeze - rest without sound" problem!! Very interesting for me: sometimes, after restarting the movies several times the movie continues to play without problem (in average in 1 of 9 cases ) - looks to me as a timing problem.
I really do hope that Apple is solving this annoying issue immediately, since otherwise they will not sell any radio remotes
Pentium 4 Windows XP

No sound with video conference. Mics and speakers work fine however.

Howdy
My buddy and I were trying to set up a video chat on our new MacBook Pros, but there was no sound. Video came through great though.
We know our microphone and speaker settings work fine though because we were able to set up an audio conference. The audio came through loud and clear for the audio connection. For some reason, however, when we connected a video conference, the sound went away. The connection doctor said audio quality was at zero for both of us during a video connection, but the audio quality was up near 100% during an audio connection.
Furthermore, that same day I was successfully using video conference chats at work where the sound came through fine. The online help only gives tips for how to adjust your microphone and speaker settings, but I know that's not our problem.
I'm logged onto iChat using an AIM account, and my buddy was using a .Mac account. I don't know if that would have anything to do with it, but we're going to try again this weekend after I get my .Mac account up and running.
Anyone have other suggestions for what we can try?
Thanks for taking the time to help!

Hey Tony
Thanks for the tips! My buddy and I tried to connect again this evening, but we still have the same problem. Video by itself just fine and audio by itself, but not the two together. We tried using AIM acount to AIM account and then .Mac account to .Mac account. We changed all the settings you sugested, but still no luck.
Any other ideas of what we might try?

Problems receiving MMS with Video

I have Alltel (if it matters) and have only had my curve a few days. When I receive mms messages with video, I am directed to go to axcessmypics.com to retrieve the message. When I do so, I am only able to view a still of the video. There is no way to play it. The video never plays from the message itself. These videos are being sent from friends, most of whom have verizon, none of whom have a blackberry themselves. Is there some software I need to have on my phone in order to view these?

At this point in time Alltel doesn't support MMS messages on their BlackBerry devices. I believe I read somewhere that they will be changing that, but I don't have a firm date.

Problem capturing sound with picture on Premiere 6.0

I've been using this system successfully for 10 years and I promise it's the last project with it, I'm going HD with CS4 next month. But...
Using Premiere 6.0. MAC G4 Dual 1000 processors, lots of RAM, 4 hard drives. For some reason when I capture a clip from tape through my Sony DS11 deck, the picture comes in fine, but without sound. I've checked all the audio settings, they're all right. I tried changing all the settings one at a time, it doen't help. I tried using the camera to capture from instead of the deck, no help. I tried a tape shot with a different camera, nope. I tried previous tapes that I was able to capture picture and sound from, now no sound. Oddly, occasionally it will work, maybe one in 20 tries. I'm finishing an important project and only need to lay in the narration, which I record with the camera using a good mike, but of course I can't capture sound. I'm tempted to reload Premiere onto the computer, but I'm afraid it won't hook up with the hundreds of clips already captured. Any suggestions?

FW Capture, whether from your deck, or from your camera, should be just a byte-for-byte data transfer, using the Capture settings that you have chosen. You have confirmed that the settings are 100% correct, and your problem is with both the deck and the camera. That leaves the FW cable, and the connection on your Mac. Now, with either, I would expect that both the video and audio would be messed up, and not just one stream. Still, those would be the next things that I would check.
Since my normal go-to utility, G-SPOT is not ported for the Mac, I'd use MediaInfo, and run one of the Captured files through it, just to see if there is an Audio stream - just on the off-chance that it's a playback issue. Assume that you are doing the Capture to MOV, so playing in QT Player should be a test too.
Other than that, I don't have any ideas to help.
Good luck,
Hunt

Sound with video in iTunes but not on Apple TV

I use EyeTV from Elgato to record TV programs, strip out commercials, and convert for use on Apple TV. This has worked beautifully except for the last time. I can watch the TV show with sound using iTunes on my Mac. However, there is no sound viewing the same file on Apple TV. This is true only for this one file (so far). I have tried both streaming the video and syncing it--no sound either way. Any ideas?
Fred Stinson

Me again,
Have an update to the problem. Think I have caused the issue when I copied my files to a new PC. When I go into itunes and select TV programmes, all of the programmes appear.
When I select the Itunes store and under the Quick Links selet "Purchased" and TV programmes, the programmes I cannot see in itunes are also not being displayed here.
Suspect this was my error - can anyone advise ?
J

Problem Importing Sound With Video

Similar Messages

Maybe you are looking for