Problem importing with Canopus 110

I have a problem with my newly bought Canopus 110.
When I import analog video into Imovie5, the audio is not on the clips. i can hear it ok through the computer's speakers when I am importing, but then when i play back the clips, they are without sound. I have checked if there is any box to tick or untick, but i did not find anything.
Please help
Thanks
Coppelius

http://www.danslagle.com/mac/iMovie/audio/1000.shtml

Similar Messages

I'm have problems Importing with the Adobe Premiere Pro (original version upgrade

Hi all. I’m having a similar problem that I've seen posted on here but I have Adobe Premiere Pro (the first version upgrade.) I upgraded it from Premiere 5.0. Every time I try to import some Mpeg files to edit, it freezes up and crashes. I’m wondering if someone could help me. My computer specs are below:
(1) Mini-Tower mATX Chassis w/300W PS 865G Motherboard
(1) Windows XP Professional Edition with Service Pack 2
(1) Intel Pentium 4 Processor 3.2 GHz 512K 800FSB w/ HT
(1) DDR333 PC2700 Non-ECC Memory sticks (512MB x 2 and two one gigs)
(1) 120GB Ultra ATA (7200rpm) Hard Drive
(1) GeForce 4 Ti4200-8x 128MB AGP Card w/ TV-Out
Thanks,
Peter
[email protected]

Thank you Eddy. I appreciate all the help and feedback I get from the website.
Also, someone suggested I convert the Mpegs to AVI files first. What do you know about AVS Video Remaker download to use to convert it???
Thanks and Regards,
Peter Adija
Office: (704) 631-5418
Cell: (704) 315-4946
Date: Mon, 8 Jun 2009 15:20:10 -0600
From: [email protected]
To: [email protected]
Subject: I'm have problems Importing with the Adobe Premiere Pro (original version upgrade
Welcome to the forums.
Thanks for providing some of your hardware details.
Please provide http://ppro.wikia.com/wiki/Troubleshooting to help us help you.
Cheers
Eddie
>

PRE 11 - import from Canopus 110

I used PRE 10 a couple of times to imort VHS through a Canopus 110, but didn't really too much, just kinda played with a couple of VHS tapes.
Just got PRE 11, and the import process seems different. I *think* that the import process PRE 10 had, the canopus showed as something different from what it shows in PRE 11 which is "AV/C Tape Recorder/Player". Why would it show differently? I think under v10 it showd as AVCHD?
In v10 and v11, I get "your current camera setting if different from your project settings. Results may not be optimized." warning. But, how do I know what settings to use?
In settings for a new Project, available Presets, I assume the only choices that would pertain to me are: DV with either Standard 48kHz or Widescreen 48Khz, or AVCHD with it's various choices. Under AVCHD, I assume that any 1080i would not be pertinent for VHS tapes, which leaves AVCHD LITE 720p24,720p30,720p60. And, I assume that the 24 or 30 or 60 mean Frames Per Second. Does it matter which one I select?
But it doesn't matter what I select, AVCHD or DV, my only choice when I go to import is "AV/C Tape Recorder/Player"...........so, does it make any difference what I put the Preset to?
Thanks, Josh

As far as I know, that device is only used to digitize into DV AVI from an analog source... not AVCHD, which is already digital from a different kind of camera
>choices that would pertain to me are: DV with either Standard 48kHz or Widescreen 48Khz
Those are the ones

Problems importing with iPhoto 5

I am having problems importing photos from my Sony DSC-T1 camera.
The import process is very inconsistent. With the first attempt at importing maybe 50% of the images have horizontal lines with color shifts. I will delete the bad imports and start the import process again.This time, of the original bad imports, maybe a third of those will import correctly. The rest will take another two or three import attempts before they import cleanly. In addition new photos will show up between imports that weren't there in the original import.
Help! Whats going on? Does anyone have any ideas?
Thanks
PowerBook G4 1.67 Ghz Mac OS X (10.4.3)

Hi mhdubi,
I just read this article and even though your camera is not listed as one of the ones affected, it could still be your problem.
http://www.consumerreports.org/cro/electronics-computers/chip-problem-with-some- digital-cameras-and-camcorders-1105.htm
Lori

Problem Importing with Sony Handycam DCR HC30

Here's the problem...I can't import my video footage to Imovie HD 06 via firewire. I have a HC30, and a HC32 and neither will import to my computer. They both used to import about a year ago, but won't anymore. My dad's camera (a HC21) will import with no problem, so I know it's not the cable or firewire port on the computer.
What is going on here? I need help with this before i loose my mind!!!

hi, did you get this resolved? I'm in what sounds like the same situation, which is desperate now. I am trying to import from a Sony Handycam - DCR-HC37 mini DV cam into my Macbook Pro with iMovie HD 06.
I plugged it into a friend's new Macbook 2 weeks ago and it worked fine, but then last week when I tried it in his Macbook again it wouldn't work.
It worked fine on my Macbook Pro with iMovie - about 8 months ago, but now it won't show up in iMovie, no matter how many times I disconnect it - reconnect it, restart camera, restart laptop. I have to show some footage at one of the most respect art institutions in England next week, and if I don't get this footage I've been collecting over the last 2 months off my Handycam I am going to be in deep trouble!!!
I really hope that someone can make sense of this problem, I've seen lots of people posting similar problems, but I don't know if this has a resolve or not.

Problem importing with sony cam

I've tried importing from a sony HDR-HC9 mini hdv tape without any luck , my cam is on power cable , the firewire plug in then i open imovie and then i click on import from camera , i get the blue screen that says importing but nothing is recording . i am sure one of you guys had this problem sooo what am i doing wrong ?
thanks for your time

Hi
See if You find any help in my list.
*NO CAMERA or A/D-box*
Cable
• Sure that You use the FireWire - USB will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
Yours Bengt W

Analog import with Canopus = buzzing

Following up on my early November questions, I managed to find someone willing to loan me a Canopus converter that works with Macs, unlike the Dazzle I bought. Dead simple to use. The only problem is that the audio has a continuous loud buzzing. I have no idea why - it's not in the source material. What can I do?

Yes.
Good cables pay for the extra expense at purchase and provide years of use.
Penny wise, pound foolish. Buy the best you can afford to buy.
I've never been to Europe but I am aware of the power supply and outlet issue you describe. Many American appliances also include "grounded" power supplies (3 prongs) but many American homes are not properly grounded and the devices plugged into these outlets could still become an "open" circuit.
Proper grounding of computers and peripherals is crucial to long life and functionality.

Problem importing with Panasonic GS-120

I am using a 17" iMac G5 along with a Panasonic GS-120 and up until yesterday, I have not had any problems. Now, iMovie or any of the other apps (Yahoo IM, iChat, Delicious Library) that were able to use the camcorder no longer function. When I go into the system profiler, the camera is not located, but it does take about 30 secs for the Mac to figure it out. If I open any app that can use the camcorder, I get the spinning beach ball and I have to force quit the app. If I turn off the camcorder, everything works.
I have tried two different firewire cables to rule out a cable problem, no luck. I was able to use it just fine on my PC, so I am pretty sure that it is not the camcorder. Does this indicate that I have a firewire issue? I followed Apple's suggestion of unplugging everything and waiting 3-5 minutes before restarting. That did not help. I have no other firewire devices or hubs connected, so I do not know what else to try.
Any suggestions?

Hi Figan,
here's a long list from Apple of suggestions:
http://docs.info.apple.com/article.html?artnum=43000
and another one :
http://docs.info.apple.com/article.html?artnum=88338
what would be my first step:
unplug your Mac from powerline.
not just "switching off", no, really physically disconnect from powerline for 10 - 15min..... it sometimes "resets" the firewire-ports of the Mac....

Problems importing with LR 1.3 - Problems finding a location?

When I try to import photos from my camera LR pops up a message saying it's having a problem finding a location to put the imports. Then when I try to import again, it goes without a problem. Has anyone else experienced this?
thanks,
Geoff

Geoff-
Can you give the exact message, what you then do? Also, type of image, platform, set up (internal, external drives, room on drive, RAM)

Problem importing with internal drive, but external drive works

Hi,
I was importing a CD in iTunes and this one track refused to import, noises sounded like it couldnt read it, and i had cleaned it multiple times. Plugged in an external USB CD drive, and it worked straight away.
Why is this?
Thanks!
J

I received a new hard drive and an enclosure today. However, when I plugged the new hard drive into the computer's internal SATA slot, the computer did not recognize that new hard drive. When I connected the new hard drive to the computer externally through the enclosure, the computer recognized it. Moreover, the computer also recognized my old hard drive when I connected it externally through the enclosure. So it seems that my problem does not reside in the hard drive, but in the SATA cable.
I wonder if there might be any probable reason other than bad cable? I am still able to install OS X to both the hard drive if I connect them externally.
Thanks in advance!

Problem Importing with Channel setting in Auto mode

I had the impression that if I chose the "auto" mode on channel selection under Edit-Preferences-Burning - Custom, then Itunes could tell if the recording was mono or stereo and upload accordingly thus saving space for mono recordings. But with "auto" all of my uploads are in stereo - only when I change the setting to Mono will Itunes upload a mono recordng as mono. Was I wrong in my assumption of the Auto setting or is something wrong - I am usung the latest version of Itunes 7 Thanks in advance for any help Jay

Also, I am not using a multi-channel output, only built-in output (stereo). Still, does not seem to work.
Another test -- opened file in Soundtrack Pro. I see the four channels, though they are grouped in some way that I cannot separate at present. I save the file as aiff, and this time Logic will open it, though it seems somehow corrupted, won't play.

6.0.2 freezes when importing with canon 5d

Hi, I'm using The latest version of Iphoto 6.0.2 with an intel Mini. The computer locks up every time i try to import photos from my 5d. It always freezes about half way through the import. I've used different memory cards, a card reader, and even hooked it up to the USB port, it doesn't matter, it still freezes. The latest thing i tried was to delete the album.xml file and restart. That didn't do it either. The weird thing is that I have zero problems importing with my 20D. I can get around the problem by copying the photos to my Dell laptop, put them on a USB memory stick and then import them into iphoto with success. Any ideas? I have a feeling it has something to do with the canon software that i installed and then removed because i didn't like it. Could it be a conflict between i photo and the canon software? How do I make sure I remove all the canon crap?

Foxfile:
I don't think it's due top the software unless it's operating on the files as you import. Are you shooting RAW and the accompanying jpg? I've had zero experience with RAW but try the following:
1 - create a new, fresh library and then see if you can import into it. If not then it's an account issue. If the new library works then it's
2 - log into another account and see if the photos will work there. If so then it's your primary account that is having trouble.
Also check some of the options in the camera about file types, compatibility, etc. There may be something in there that can be changed so make them work. I'm guessing since I don't have a camera that shoots raw.

My Mac was upgraded to Snow Leopard. iMovie now have problems importing from SONY camcorder.

This is the first time I hooked up my camcorder since the upgrade. iMovies shows my videocan with an excalamation mark inside a yellow diamond and bogs down completely. What is wrong? I have iLife 2011. Is there a setting that I missed?

{quote}Has anyone else had problems importing with this specific model or a related model and if so were you able to fix the problem or find a work around? I guess I could transfer the old Sony movies to my new Canon GL2 and then import into the iMac but that kind of defeats the purpose as I have been repeatedly told how simple and intuitive it is to do things on the iMac.{quote}
I don't have the Sony, but for older tape camcorder's I use a standard DVD recorder and burn the movie to DVD then use [HandBrake|http://www.versiontracker.com/dyn/moreinfo/macosx/21117] to convert to MPEG-4 for importing to iMovie.
Dennis

Audio problems with Canopus analog to digital converter

I'm trying to digitize and import VHS tapes into iMovie 08. I'm using the Canopus 110 analog to digital device. I've connected the VHS player to the Canopus with RCA cables, as prescribed. The video has imported beautifully — but there's no sound, and so my then 2 year old daughter appears to sing, but alas, no voice — except, for the occasional clip (about 2 to 4 seconds of sound on a 30 minute tape). Any ideas? (I've spoken with an Apple tech who walked me through a test before assuring me the problem didn't seem to be with iMovie ['-).

Hi
a. You did install the Canopus programs (on CD) ?
b. I connect mine to a Standard VHS-VCR and use the SCART connector on it's back
and to this a RCA to SCART plug WITH AN IN AND OUT Switch !
On my VHS-VCR there are two SCARTs on it's back - only one of them works for this.
c. If You in iMovie pref - set Playback via Camera - picture will play but sound
will be directed to analog device = Your Canopus
and if You connect a TV to this or via the VCR (as I've done) the audio playbacks
nicely trough this.
Sorry this only goes for iMovie 1 to 6 - not for 08 or 09 (very bad)
Yours Bengt W

FCE HD (3.5.1) importing analog videotape via Canopus 110

I am new to all aspects of Final Cut Express and the Canopus 110 and need some serious help to capture video from VHS tape. I've followed (I think) all directions for the equipment and software, but I cannot get it to work -probably a simple solution, but I am stumped!
+MacBook Pro 2.4 GHz Intel Core Duo, 4GB memory, OS X 10.5.8 & FCE 3.5.1+
*Equipment Settings*
VHS Tape Deck is on (it does work)
S-video cable connects from VHS player "S-video Out" to Canopus 110 "S-video In"
Canopus ADVC110 - all DIP switches set to off, "Analog In" light is on
Firewire cable connects Canopus110 to MacBook Pro +(also providing power for device)+
Fantom Green Drive 1TB External Hard Drive attached to MBP via USB
*Software Settings*
I have tried two different Easy Setup Choices
DV-NTSC DV Converter - this choice does not appear to work at all, unless I am missing something. This setting does not allow me to capture.
DV-NTSC - with this setting, it appears the devices are connected properly as FCE shows "VTR ok." Yet there are only bars with the note "preview disabled." I can theoretically capture data... but only a black screen is visible, no video.
I really need help. The movies were "taped" 20 years ago, but from film reels taken more than 50 years ago with an old movie camera. Obviously, I am not worried about sound at this time, but I must be able to capture the video stream in short clips that can be re-ordered. Given the age of the tapes, though, it is of primary importance that they simply be preserved.

Hello, and welcome to the Forum.
It appears you have the Canopus connected properly.
Exactly what model MacBook Pro do you have; and is the FireWire connection FW400 or FW800? What kind of cable are you using to connect your MBP to the Canopus box? (eg. 6-pin FW400 to 6-pin FW400, or 9-pin FW800 to 6-pin FW400, or something else? Is is a cable alone, or are you using some kind of FW400/800 adapter?) Do you have ANY other FireWire devices connected?
You should use the DV NTSC - DV Converter easy setup. When you use this easy setup you will only be able to use 'Capture Now'. Note: you do have to manually start your VCR playback.
Try shutting off everything, then power on your VHS deck & Canopus box. Then start your Mac. Then start FCE. At this point, does FCE 'see' your video in the Capture Now window?

Problem importing with Canopus 110

Similar Messages

Maybe you are looking for