Problem in 6070 connecting

i have a problem in connecting my 6070 to computer nokia pc suite canot connect with it if any one know how to solve please replay

31-Jan-2007
06:41 PM
tota86 wrote:
i have a problem in connecting my 6070 to computer nokia pc suite canot connect with it if any one know how to solve please replay
No one seems to know. My service provider offered the following advice:
Remove the battery and SIM card, wait a few minutes, then try again. It made no difference. Don't try unplugging all your USB stuff, cos that doesn't work either. Sorry, but I'm a bit...annoyed. The Nokia site is just a sales catalogue.

Similar Messages

Problem with JCo Connection Pool

Hi,
I have a problem with using an RFC Model in my WebApplication. So sometimes the access to the function block works, and sometimes it doesn't work. Now I know, that there is a problem with the connection pool. Look at this message:
com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool WD_X24_MODELDATA_DEST_CPIC_REKTO_DE_useDefinedUser is exhausted. The current pool size limit (max connections) is 10 connections.
So it looks like a problem with closing the JCo Connections after using. Do know where the problem is? Because I'm using many other function blocks with no problems.

Hello,
You need to increase the pool size via Visual Administrator.
Server 0 -> Services -> JCO RFC Connections.
Change the pool size from there. I believe a restart is in order.
Regards,
Jan

Problems with ipod connection.

Problems with ipod connection.
I have problems to connect my ipod to computer windows 7.
When I connect I get the following error:
"We encountered an ipod, but could not be identified correctly. Disconnect and reconnect the ipod and try again."
And it recognizes the ipod when trying to go play music or videos make me the following error:
"Error while trying to copy on disk. The device is not connected."
I've uninstalled all apple applications and re-installing, as I formatted the ipod and continues to set the same error.
What else can I do?

Hello,
While your symptoms don't exactly match the descriotion, this article may be usefull in discovering if there is a setting on your computer that is causing this to happen.
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
-Griff W.

Every time I try and update my iphone 4 to ios 7.1 in iTunes 11.1.5 it says "connection reset" even when there is no problem with my connection

I have an iPhone 4. I use iTunes 11.1.5 on my Mac. I am trying to update to ios 7.1 through iTunes, but every time I do that, I get a "connection reset" error, even when I know there has been no problem with my connection.
The exact error message is as follows:
"There was a problem downloading the software for the iPhone "Anne's iPhone". The network connection was reset.
Make sure your network settings are correct and your network connection is active, or try again later."
I have checked several times. There is no problem with the connection, and I have tried to download the software several times today.
Any help you can give me would be appreciated.

Just managed to successfully download the update, having retried five or six times. I did unplug my phone while the download was taking place (had asked iTunes to download only, not to update) -- suspect this had no bearing on it whatsoever, and that persistence is the only way here.

Problem in establishing connection with mysql 5.0

Hi,
I am using JCAPS 5.1. I tried to insert data to mysql database table.
But i got following error
java.sql.SQLException: Error in allocating a connection. Cause:
Physical Connection doesn't exist.
My intention is to read file in which data are comma seperated and to
populate those values to a mysql 5.0 database table.
Sample DATA in file [test.txt]
111,gg,23,MFG
112,hh,24,MFG
113,ii,25,RETAIL
114,jj,26,IT
Database table: employee
eno,ename,eage,edept
While creating JDBC OTD there is no problem in establishing connection with database. But after deploying i got above error.
I have used Mysql 5.0 Connector/J JDBC driver. Added JDBC driver jar files to following directories as required.
1) C:\JavaCAPS51\logicalhost\is\lib
2)C:\JavaCAPS51\logicalhost\is\domains\test\lib
Steps i have followed as per JDBC-ODBC -eway user guide doc.
1) Created USerDefined OTD and added necessary fields
2) Created JDBC OTD.
3) Created JAVA collaboration and do business process for inserting
4) Mapped all components by creating in Connectivity MAp
5) created necessary external systems in envrionment explorer.[JDBC External System and File External System]
6)Created Deployment profile
5) Deployed it.
After deploying it gives error as
java.sql.SQLException: Error in allocating a connection. Cause: Physical Connection doesn't exist
Please let me know the solution for problem.
Message was edited by:
VenkateshSampoornam

In the environment definition,
-> External Application JDBC
-> Properties
-> Outbound JDBC Connection
You have the database URL in the "DriverProperties" field
Valid URL would be : jdbc:mysql://localhost:3306/caps
!! The doc says that this field is optional !! Seems to be an error in the doc:
Hope this helps
Seb

Problems maintaining network connectivity in hotels

I have a problem maintaining internet connectivity when I use hotel WiFi services where you have to "login" first via the web browser. I don't have a problem with the WiFi per se and I have no problems with initial connectivity -- I can login and browse the Web without problems. But if my MacBook goes to sleep, I can't browse, get email, etc when it wakes up.
I don't have this problem at home - only when I travel to places where I have to first "login". This has been happening consistently since I got the MacBook 10 months ago and at various hotel chains around the country. Also when I have another laptop with me ( Windows ) I don't see this problem. Sometimes on the Windows machine I have to "login" again after it wakes up but I never have this opportunity on my MacBook -- the browser just hangs there, "loading" indefinitely.
The only way I've found to fix this is to reboot my MacBook. I've tried Googling for a solution or even anybody else who has this problem and I've turned up nothing! I am really the only person having this problem?!? LOL...

Unfortunately this is a fact of life with these types of hotel systems. Live with it or set your Mac to "Computer never sleep" when you are traveling and that occurs.

Problem with client connect to server

Hello
I'm having problems trying to connect a Windows NT client to an Oracle 8.1.5.0.2 server running on
Redhat linux 6.1
I've setup the listener, which seems to allow a sqlplus client running on the server to connect to the
database through the listener.
<snip>
$ sqlplus scott/tiger@8idb
SQL*Plus: Release 8.1.5.0.0 - Production on Mon Apr 10 16:44:57 2000
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Release 8.1.5.0.2 - Production
With the Java option
PL/SQL Release 8.1.5.0.0 - Production
SQL>
</snip>
Listener.log
<snip>
10-APR-00 16:44:57 *
(CONNECT_DATA=(SERVICE_NAME=8idb)(CID=(PROGRAM=)(HOST=dbserver)(USER=oracle))) *
(ADDRESS=(PROTOCOL=tcp)(HOST=10.0.0.10)(PORT=2816)) * establish * 8idb * 0
<snip>
But when I try to test the connection from the NT client using "Net8 Easy Config"
<snip>
Initializing first test to use userid: scott, password: tiger
Attempting to connect using userid: scott
The test did not succeed.
ORA-12571: TNS:packet writer failure
There may be an error in the fields entered,
or the server may not be ready for a connection.
</snip>
Even though I have the following entry in the listener.log.
<snip>
10-APR-00 16:58:37* (CONNECT_DATA=(SERVICE_NAME=8idb)(CID=(PROGRAM=C:\Program
Files\Oracle\jre\1.1.7\bin\jrew.exe)(HOST=NTclient)(USER=NTuser))) *
(ADDRESS=(PROTOCOL=tcp)(HOST=10.0.0.20)(PORT=2465)) * establish * 8idb * 0
</snip>
Though sqlnet.log is logging the follow
<snip>
Fatal NI connect error 12537, connecting to:
(LOCAL=NO)
VERSION INFORMATION:
TNS for Linux: Version 8.1.5.0.0 - Production
Oracle Bequeath NT Protocol Adapter for Linux: Version 8.1.5.0.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 8.1.5.0.0 - Production
Time: 10-APR-00 16:58:37
Tracing not turned on.
Tns error struct:
nr err code: 0
ns main err code: 12537
TNS-12537: TNS:connection closed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
</snip>
The listener.ora is as follows
<snip>
listener=
(description=
(address_list=
(address=(protocol=tcp)(host=10.0.0.10)(port=1521))
sid_list_listener=(sid_list=
(sid_desc=
(global_dbname=8idb)
(sid_name=8idb)
(oracle_home=/home/oracle/product/8.1.5)
</snip>
Clients Tnsnames.ora file
<snip>
# Generated by Oracle Net8 Assistant
8IDB=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(PORT = 1521)(HOST = 10.0.0.10))
(CONNECT_DATA =
(SERVICE_NAME = 8idb)
</snip>
Any Help would be greatly appreciated
Thanks
Regards
Tom
null

Hi Hasan,
Firstly, please make sure that the software is compatible with the Windows Server 2012. Have you updated this software to the latest version?
Secondly, please check if the software is listening on the proper port. To verify this, please use the command below:
netstat -an
Also, please disable the firewall and try again.
Best regards.
Steven Lee
TechNet Community Support

I get an error message when trying to install software update 4.2.8 "problem downloading, network connection timed out. Check network connections.

I get an error message when trying to install software update 4.2.8
"problem downloading, network connection timed out. Check network connections."
Anyone one else had this problem?

Brian-KK Sabah wrote:
I too get the same message but I the software had downloaded 100% but about half way through "processing file" the error message (.3259) Check network connections. How do I fix this?
See Here for your Error Message -3259
http://support.apple.com/kb/ts2799

Problems trying to connect to a network printer

I am logged onto a network over a vpn. I am then trying to connect to the print services. If was using windows the following instructions are given:
"You can print using icsafecom1, if you go to start, run and type in \\icsafecom1 then press ok it should ask you to input you username and password, you should then see a list of printers if you right click on the first printer called ictprintservice mono and say connect it should then connect you to the printers via the vpn. "
Now I have no instructions for how to do this on a iBook. I have tried to connect to the server icsafecom and get to enter my username and password but the get an error (error code -50) and can go no further. I think that this might be a problem with server connections - console gives the following output:
===== Tue Nov 29 2005 ===== 11:28:53 Europe/London =====
mount_smbfs: No credentials cache found krb5cc_getprincipal
mount_smbfs: No credentials cache found krb5cc_getprincipal
mount_smbfs: no shares found
mount_smbfs: no share specified for ig05@ICSAFECOM1
I have also tried to connect to the printer via the printer setup options but it is not clear how to do this either.
Does anyone have any ideas about the problem as the support staff here are not mac literate!
Many thanks.

We got it!
If helpful...
The schema parameter on the idm resource configuration page references the name of the HelpDesk form. By default, it is HPD:HELP_DESK.
Be careful...it is case sensitive.
Tip: Check the ARSCHEMA table.

Problems in internet connection in Lumia 710

I have problems in internet connections in Lumia 710... I have to reset the phone everytime for the connection to work properly...
Solved!
Go to Solution.

I can let you know this is not a known issue with the Windows ecosystem as the Lumia range of devices, the hardware itself maybe different specification but the ecosystem is the same. Also I myself have 710 and have never had this issue and am based in the UK so the statement from your network provider is false. Who is your network provider?
What I recommend you do is take your device to your nearest Nokia care point to have the device inspected. You can look at the link below for the nearest one:
http://www.nokia.com/global/support/locations/
Also did you ask your network provider for a new sim? Was the phone purchased off line or part of a contract?
Finally are you 100% sure your data plan is active? Also go into settings and mobile network and make sure data connection is on and highest speed is set to 3G
Regards
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
Detected Problems:
- Access denied for attached mailbox (department mailbox)
- Access denied for delete or move messages on own mailbox
- Can't send new messages with error (Error: [0x80004005-00000000-00000000])
Solution:
- Rollback to Exchange 2010 SP3 - Rollup 7
- You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
Algunos de los destinatarios no recibieron su mensaje.
Asunto: Hola
Enviado el: 11/12/2014 8:35
No se puede localizar a los destinatarios siguientes:
'[email protected]' en 11/12/2014 8:35
Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red.
Error: [0x80004005-00000000-00000000].

See the following forum thread:
https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

I can't make a purchase with iTunes because it says there's a problem with the connection. How do I fix this?

I can't make a purchase with iTunes because it says there's a problem with the connection. How do I fix this?

Morning Gjakleinmark,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best of luck,
Mario

Thank you all for the responses. By process of elimination, I think the problem is the connection to the express in between the extreme and dock. I bought another express and tried it at dock, no luck, I then replaced new express where the one is between

I have an airport extreme and express setup. My extreme is in my 2nd floor office with windows facing the water. My dock is about 250 ft away down a very steep hill. I have the express about 100 ft down the hill in an electrical waterproof box attached to a tree as high as I could install. The signal is weak and I'm thinking I might have to buy another express. Any thoughts on the best setup for me. I ultimately want to control speakers(hard wired in) down at the dock with my iphone. I have a receiver coming with airplay built in.
Thank you all for the responses. By process of elimination, I think the problem is the connection to the express in between the extreme and dock. I bought another express and tried it at dock, no luck, I then replaced new express where the one is between extreme and dock, no better. I unplugged the express between extreme and dock and there was no difference. So I believe I am connecting to the airport express or extreme that is inside the house. Again because when i approach express that is halfway I reconnect. so if you can understand my chaos, I believe the express in between is not really connecting to the extreme inside my house. Yes, No? So I need to know how to know if the express half way down the hill is getting the connection from the the extreme in the house. This is wearing me out!!!!!

You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
An Extreme's Guest network is separate from its Main network; that is the reason for having it.

Problems with Document Connect

I have a problem with Document Connect. I am unable access office live workspace.
I have been on the help line with microsoft but they were unable to help.
Then I went to an apple store and was informed by one of the sales assistance that Document Connect never worked with the apple. Well what was the point in having it then?

I wish I knew what Document Connect is. I'd bet I could fix it. Not really, but what is it?

Problem in 6070 connecting

Similar Messages

Maybe you are looking for