Problem in a VI changing from 32 to 64 bits

Hi,
He have a custom program to acquire images from a Pulnix 6710CL. It used to work in LabVIEW 2009 (32 bits) installed in a Windows 7 operated computer (32 bits also). Due to computer updates, we are now using Windows 7, 64 bits and have installed LabVIEW 2011 (64 bits also). One of our VIs is not working anymore since then (I attatch it, with the corresponding subVIs), we have performed several tests and seems to be "IMAQ BCGlookup.vi" what is causing the crash, the VI works perfectly without it but crashes (LabVIEW stops running and closes) when we call it. We have performed several basic tests but we are unable to find the reason for the crash. We would appreciate any help or advice.
Julene
Attachments:
prueba_solo_camara.zip ‏358 KB

mikeporter wrote:
Yes, 64 bit LabVIEW has a history of being a bit flaky. Also many of the toolboxes don't work with it.
Mike...
Except that the IMAQ Vision Toolkit was excplicitedly one of the Toolkits that was fully ported to LabVIEW 64 bit because image analysis applications are the most likely applications that can require a 64 bit application memory space.
However, something apparently seemed to have gone missing in the 64 bit version. Since it is done in an old version of LabVIEW (2009) the most likely recommended remedy would be to upgrade to a newer LabVIEW and IMAQ Vision version. 2009 was the first to support 64 bit in any way and there is a good chance that something has been fixed in the last 6 years.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

FCP6 BIG PROBLEM - Media Manager Speed change from FCP5.1.4

Hi!
We have problem using a media manager project from FCP5.1.4 in FCP6. Almost ALL clips with speed change are messed up (all new speed around 1% to 7%). This is really a problem for us, since we always do media manager of everything we do to be able to go back and make changes.
We have 2 MacPro 2 x 2.66Ghz, 8GB RAM, 10.4.9, Quicktime 7.1.6, FCP6, Decklink HD extreme or AJA Kona LH (with the latest driver).
We tryed with different format: HDTV 1080i50, DVCProHD 720p59.94, SD Uncompressed 10bit, .... always the same problem.
Is there a new way to use the MM in FCP6?
Thank you!

Hi! And thanx for the tip.
But we use Media Manager everyday with speed change WITHOUT any problem (with FCP 5.1.4).
We already try something similar, we copied the good clips (with speed change) from the ORIGINAL timeline to the media manager one, deleted the bad clip (with the wrong speed change) and pasted the good one in there place. Then we reconnected those clips with the MEDIA MANAGED one. We get a warning that the IN and OUT of the media are not the same, CLICKED continue and everything is always (well 95% of the time) OK.
SO yes, we have the solution, but it's really really long and painful, especially with multilayered sequences.
Right now, when I open any Media Manager in FCP 5.1.4 (created with FCP 5.1.4) everything works fine. Doing the same thing with FCP6 = speed change problem.
Thanks again,still looking for another solution.

S10 Change from Vista 64-bit to Vista 32-bit

Hi from Vienna,
today I got my new Thinkstation S10 with Vista 64-bit. Is it possible to change to Vista 32-bit, cause I have some programs without driver support for Vista 64-bit.
Thanks from Vienna
Leon

can you mention the programs you are having problem with may be there may be some resources where you can find solutions
also are you using any 32 bit programs in your vista now?did you check out the "X86" folder in windows folder you can install 32bit programs into that folder check this out and reply
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Is my Adobe CC for photographers license still valid if I change from Windows 32 bit to 64 bit?

I've bought a license for Adobe CC for photographers (costs 10$ a month), and now going to upgrading my operating system from Windows 7 32 bit to 64 bit. I know that there is a 64 bit version for Photoshop, don't know about Bridge. So, is my license still valid if I upgrade, or do I have to buy a new CC program for photographers for the 64 bit version of Photoshop??
TIA

Good to know information :
You can install and activate Creative Cloud subscription Apps on 2 computers. (Either on Mac or Windows as per your choice) .
Either it may be 32 bit or 64 bit , it does not matters, the subscription will be counted based of number of activation done as per Machine ID's.
Before , you upgrade the computer to 64 bit, better to Sign out from Creative Cloud desktop application.
If the Machine ID changes just in case , it will be counted as 2'nd activation.
Sign in, Sign out | Creative Cloud desktop app
Even though, if you had exceeded Maximum activation limit(Already activated on 2 computers) , still you can reset the activation count to Zero, so that you can again activate CC subscription on any of 2 computers as per your choice.

Posting change from Unrestricted to Quality inspection

Hi Experts,
Help please.
I am trying to do posting chnage using MB1B transaction (322 Mvt type). But I'am having an error : "Change the inspection stock of material XXXX in QM only".
I do not know what this error means, Please someone help me.
Initially, the material was received in "Quality inspection", but it was already been moved to Unrestricted. But now, we are having problem in doing posting change from Unrestricted to Quality inspection.

as the collegues already said. when QM is active you cannot do manual QM transfer postings.
But you can do a MIGO with 102, to cancel the receipt. (you have to change the proposed quality status in item detail from Quality to unrestricted before you can do this)
Then you can receive it again the standard way. It will again go to Qualtity inspection and create an inspection lot .

HP LaserJet 100 M175nw - Change from an old SSID to a new one

Hi all,
I had an HP LaserJet 100 M175nw wirelessly connected to my WiFi a few days ago without problems. But I change from ADSL to Optical Fibre Internet Connection yesterday, and the SSID name of my new Router has changed (from WLAN_55 to WLAN_43).
The problem is that my Printer has configured and saved the SSID name of the old router (WLAN_55) yet, and I don't know how to update it!!!
I have run the HP install CD several times, navigate through the printer menu display and I am desesperated...
The printer works well though USB, but wirelessy is not working because it is trying to connect to the old network.
Thanks an regards.

I have the exact same issue and unfortunately this link does not help
The link takes me to the new install procedure and the wps option suggested just does not work due I believe to a problem with my router.
SO I still need to change the existing SSID and password manually.
On an earlier post it was indicated that this is possible to do manually on the printer but I cannot find a way to do that. Are you able to post the menu directions to get to the change SSID option? I dont think it exists!
OR
How do I access the printer configuration via a usb link? in order to find and change the SSID and password?
I dont think there is a way to do this either!
OR
How do I access the printer configuation browser without a wireless connection? Maybe this is the answer..
To do this I connected a network cable between the computer and the printer and typed the network ip address (IPv4 Address) into my browser.
I found the network ip address by printing a Config Report like so....
Print a network configuration report
The network configuration report shows the network or wireless settings for the product. Follow these steps to print a configuration report from the HP product.
Load letter or A4 unused, plain white paper into the input tray.
On the product control panel, press the Setup button ().
Press the Right Arrow button () to select Reports, and then press OK.
Press the Right Arrow button () to select Config Report, and then press OK. The product prints a configuration report.
Then I chose the Networking tab on the printer configuration page
Then the Wireless Configuration option from the menu on the left
There I found my new router SSID listed and clicked on it
And futher down a space to enter my new password
And clicked Apply
And hey presto - solved!

Satellite C660 - How to change from 32 bit to 64 bit operating system?

Can some one please tell me how to change from a 32 bit to a 64 bit operating system for my Toshiba Satellite C660 Notebook?
No cds came with my notebook so I can't restore.
I installed the 32 bit when setting up by mistake and would now like to change.
Thanks in advance

>No cds came with my notebook so I can't restore.
In user manual you could find a info that recovery disk needs to be created using preinstalled software called Toshiba Recovery Media (disk) Creator
>I installed the 32 bit when setting up by mistake and would now like to change.
The Toshiba image of some notebook models contains the Win 7 32bit and 64bit system.
Not sure if your image supports both versions so cannot say for sure if you would be able to switch to 64bit but try this:
http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
During HDD recovery procedure you should be asked what version you want to chooseof course if both versions would be available so check thisotherwise you will need to purchase an 64bit version.

I have moved from the US to Norway, and want to change my apple ID to the Norwegian appstore. However, I am not allowed ot change from the US store before I use up my balance, which is 0.17 dollar. The problem is that nothing costs 0.17 dollar.Please help

I have moved from the US to Norway, and want to change my apple ID to the Norwegian appstore. However, I am not allowed ot change from the US store before I use up my balance, which is 0.17 dollar. The problem is that nothing costs 0.17 dollar and I do no longer have an american visa card, only Norwegian. Is there any way I can erase the credit on my account so I can change the appstore country? Or osmething I can use this credit on? Thank you very much

Try contacting the store support staff at: http://www.apple.com/emea/support/itunes/contact.html they are usually pretty good at sorting out these issues.

Problems with email account on ipad2 when changing from mobileme to icloud

Problems with email account on ipad2 when changing from mobileme to icloud

Would you please give us some more information about your problems.

Why am i having problems since changing from snow leopard loading maverick

why am i having problems since changing from snow leopard downloading maverick

Yes you solved your own question, use printer handles color, whcih shodul have been the default. If you do want to experiment with Photohsop manages color, try the CMYK profiles, and send a cmyk file. Only exception is if you print to one of the few RGB printers like a lambda.

Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up allright, but the programs don't start when I press any buttons. How do I fix this problem?

Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up alright, but the programs don't start when I press any buttons. How do I fix this problem?

If Layers is greyed out it possibly means that you are in Quick Mode. Select 'Expert' and all the options should become available.
Try permanently associating psd files with C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe and see if that fixes the issue. Instructions here - http://windows.microsoft.com/en-gb/windows-8/choose-programs-windows-uses-default.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Since updating my default programs have changed from CC 64bit to CC 2014, is this a problem?

I updated my Creative Cloud this week and my default Illustrator & photoshop seem to have changed from what I now realise is CC64bit to CC 2014. If I click to open a file it opens a version other than the one the file was created in and different from the one I have pinned. It doesn't seem to have created much of a problem (though some won't open) but I now realise I have 4 versions installed CC 64bit, CC, CC2014 and an older version CS5. Should I delete any?

hi,
this confused me a little bit in the beginning too. The splash screen of, for example, Illustrator CC 2014 doesn't mention 64-bit any more. But when I looked in help > about it says in brackets next to the version number that it's 64-bit, for example, "18.0.0 (64-bit)"
Hope this helps

Network problems are preventing connection to Exchange when changing from Ethernet to Wifi

I have a user that connects to Exchange fine while their computer is docked and connected to the LAN by Ethernet, but once they undock they receive the error "Cannot open item. Network problems are preventing connection to Exchange server." They
are connected to the internal company Wi-Fi and nothing changes about their computer's status other than changing from being on the wired network to wireless.

Hi,
What's your Outlook version and Exchange version? Outlook 2007 or Outlook 2010/2013? Please check your Wifi settings and make sure your Wifi password is correct.
In Outlook, please click File > Account Settings > Security and
make sure the Encrypt data between Microsoft
Outlook and Microsoft Exchange is checked.
Regards,
Winnie Liang
TechNet Community Support

Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?

Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?

Seems no one care about us .no one replied till no@!!!!@ strange

Problems auto-connecting after sleep & startup (Changed from WPA to WEP)

Okay, I know there have been several issues similar to this, but after two days of sifting through posts, I still can't resolve this.
A few days ago I switched my AirPort network security from WPA to WEP-128. This was required to allow my Nintendo DS to connect to the netwrok, by the way. After the change, two similar, but slightly different problems started:
My 15" PowerBook G4 no longer auto-connects to the network at startup. The network is listed in the drop-down, and connects with no problem when I choose it manually. The computer seems to have no problem re-connecting after waking from sleep, which is odd because...
My other PowerBook, a 12" G4, won't auto-connect at startup AND won't re-connect after sleep. As above, it has no problem connecting using the Keychain once the network is selected from the drop-down.
So far I have tried, on both machines:
- trashing the system airport prefs
- deleting and resetting the network's keychain entry
- repairing the keychain (no errors found)
- turning off some unneeded power mgt options
- disconnecting USB peripherals
I have also reloaded the software on both my AirPort Extreme base and my AirPort Express hub, as well as restarting both hubs. I've also made sure that AirPort is at the top of the network connection list.
Both laptops are running 10.4.3 and have all the latest software updates installed.
What am I missing?
Thanks.

Both of these replies are helpful, in that they help confirm something I figured out this morning, almost accidentally.
One thing I didn't mention was that during the change from WPA to WEP I changed the network password. Now, I assumed that since the Keychain seemed to be working and I could get on the network manually without needing to enter the password each time, that meant the new password had correctly propagated throughout the system.
So, this morning I go into the Network settings, switch from Automatic to Preferred, select my network, look at the properties, and notice that somehow it has way too many bullets for that to be the correct password. I re-entered the password and that seems to have solved the problem. The new password I had entered somehow didn't make it into this setting. I guess trashing the network prefs, or renaming the network would have had the same effect.

Problem in a VI changing from 32 to 64 bits

Similar Messages

Maybe you are looking for