Problem in a webdynpro abap component - Really very urgent PLZ help me
Hi Experts,
I am working with FITV_POWL_TRIPS webdynpro component.In that my requirement is to keep a button and input fields near the create travel request button and to add some functionalities.
I worked in the component , unfortunately the component get corrupted. i don't know how to retrieve the component to its original state.I tried with version management but no use.
Can anybody suggest me how to retrieve the component. Any of your inputs is valuable to me.
if the patch should be installed is the only way mean plz tell me the patch details.
Actually FITV_FPM , this component get damaged. This component is under FITV_POWL_TRIPS.
Regards,
Ramanan
Edited by: Ramanan Panchabakesan on Jul 9, 2008 12:10 PM
Dear Thomas,
Really i failed to use the enhancement mode to work with that POWL component.Actually the thing i did is added an attribute directly to the component controller of that component and binded it to the drop down then activated , it shows some error "Configuration missing error" so again i deleted that attribute and reactivated it again but it shows the same error. so i tried to retrieve it back from version.But failed, then compared with other system the methods and attributes are same as it is.Finally copied the methods and code from that system though all are same in two systems, then activated.No error now.But clicking on the "create request" button the component shows a road map step with 1 as completed status.It looks with the following information
Fite_Request
1
Completed
and with two buttons one is disabled and thats capiton is Previous step and the other is exit that is enabled
when i clicked that exit button it again goback to the intial screen of FITV_POWL_TRIPS.
Before it shows with some 3 or 4 road map steps with some different status.
Tell me any other way to retrieve it.As the patch to be reinstalled is the solution means please tell in which patch this resides.Technically i want to retrieve it, going for patch update is secondary and i go for that if and only if there is no other way.
with hope and regards,
Ramanan.P
Edited by: Ramanan Panchabakesan on Jul 15, 2008 7:34 AM
Similar Messages
-
Html form-jsp retrieval problem..very urgent plz help
i have created the following html form.
<form method="POST" action="b.jsp" >
Insert Feed URL <input type="text" name=""></br></br>
<input type="submit" value="Search"> <input type ="reset" value ="Reset">now when i click search i should be able to get that url which i inserted in the text box through b.jsp which has the code for retrieving it. it is basically a .xml url. hence i have used
object.put("1", " ");
in the b.jsp(just a part of the code)
what value should i put in between the quotes(" ") so that i retrieve the info as per the url input in the html form.
kindly help
very urgent
cheersok i tried but i got the following error:
symbol : variable request
location: class org.apache.jsp.b_jsp.FeedServer
object.put("1",request.getParameter("feedURL"));
^
1 error
org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:84)
org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
org.apache.jasper.compiler.AntCompiler.generateClass(AntCompiler.java:246)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:288)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:293)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:291)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:362)i also tried this
String feedURL = request.getParameter("feedURL");
object.put("1","feedURL");
but still errors
Generated servlet error:
.java:30: feedURL is already defined in org.apache.jsp.b_jsp.FeedServer
String feedURL = request.getParameter("feedURL");
^
Generated servlet error:
java:30: cannot find symbol
symbol : variable request
location: class org.apache.jsp.b_jsp.FeedServer
String feedURL = request.getParameter("feedURL");
^
2 errors
org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:84)
org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:328)
org.apache.jasper.compiler.AntCompiler.generateClass(AntCompiler.java:246)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:288)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:293)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:291)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:362) -
Does any body Know how to connect thumb device to JMF
i want the code please send it to me
very urgent
Advance ThanksHi,
You can create a new item under that table region and changed its style as MessageTextInput or MessageStyledText depending on your requirement and associate it with transient attribute or any other attribute of VO for which you want it to associate.
For old one you can simply delete that field in OAF table region and in VO,you can edit VO by movinf that field by arrow sign. -
Friends,
I have been struggling to convert the from address of the retrieved from the inbox to a normal string.
I have tried using the toString() method, but still I am able to print only the internet address only .
Though it may look like a silly question to many of u, it would be really helpful to me if I get the answer.
Please help me mail gurus.I know this is ridiculously incredibly amazingly outstandingly urgent, but it would still help if you took a few seconds to actually describe the problem.
An example might help. What is this "internet address" you mention and what is a "normal string" version of it? -
I need to upgrade my ram very urgent plz help !!!
I have MacBook Pro 13 inch early 2011, i need to upgrade my ram, right now i am using 4gb ram, i searched on apple support it says max 8 gb ram and base 4gb , but if i install 8 + 8 = 16 gb ram will it work perfectly ?
Yes it will work and is compatible with your make and model computer early 2011,13", 2.7 ghz, i7 MacBook Pro I believe what Niel meant by this satement ~Yes, unless there's a problem with the specific modules you get; the computer supports 16GB.~ Was if the new modules eg 2x8 are in themselves a problem or defective. Hope this helps you somewhat
-
Calling a webdynpro ABAP component from a BSP...
We have a BSP application. On which we have a tab strip control. Upon clicking on one of the tabstrips, is there a way I can launch and display an output from a webdynpro ABAP component?
Any ideas will be appreciated.
Thanks
- SekharRaja,
I tried get the iframe tag
<IFRAME NAME="Frame1" SRC="your_web_dynpro_link.htm" >
</IFRAME>
with the SRC = "<the URL from the web dynpro application>"
Did not work. I am sure I am doing something wrong. In fact it did not work even for a BSP application.
Any ideas anyone?
Thanks
- Sekhar -
Access Portal groups in webdynpro ABAP component
Hi Experts,
I have a requirement to access portal group in web dynpro ABAP application and based on whether user is assigned to particular group or not further processing for application will be done.
Are there any UME API or some other API's available to access portal groups in Webdynpro ABAP component?
Thanks in Advance..!!
Regards,
Shruti ShahThis might be a question better suited to the portal forum. The WDA Portal APIs do not have such functionality. You might be able to take the Java Portal APIs and wrap them in a web service so that they are callable from ABAP.
-
When m testing webdynpro abap application m getting this error help me to get solution
hi all,
when m testing webdynpro abap application m getting this error help me to get solution.
plz find the screen shotHi
I think you are using the IDES system, Can you check the services in SICF transaction. If the service is not activated you activate it again.
In this path you will find in the below path and try to check/activate the services relevant to the WDA stack.
sap/bc/webdynpro/sap -
Encrypting and Decrypting Data(Its Very Urgent, Please Help.)
Hi,
Can anyone tell me some idea in the below mentioned details.
Iam creating a Function for Encrypting and Decrypting Data Values using
DBMS_OBFUSCATION_TOOLKIT with UTL_RAW.CAST_TO_RAW by using
Key Value as normal.
But the problem, is it possible to have the key value more than 8.
Its showing me error when i give the key value less than 8 or more than 8.
Can u tell me why it happens, is that the limit of the key value or is any other way to do that.
Its Very Urgent, Please Help.
Thanks,
Murali.VIs this what you're looking for?
Usage Notes
If the input data or key given to the DES3DECRYPT procedure is empty, then the procedure raises the error ORA-28231 "Invalid input to Obfuscation toolkit."
If the input data given to the DES3DECRYPT procedure is not a multiple of 8 bytes, the procedure raises the error ORA-28232 "Invalid input size for Obfuscation toolkit." ORA-28233 is NOT applicable for the DES3DECRYPT function.
If the key length is missing or is less than 8 bytes, then the procedure raises the error ORA-28234 "Key length too short." Note that if larger keys are used, extra bytes are ignored. So a 9-byte key will not generate an exception.
C. -
Kernel panics, message saying "You need to restart your computer.Hold down the Power..." I am in the middle of HSC very URGENT please help!! Mac keeps needing to restart!!
I looked in console and its saying that it may be because of Sophos Anti-Virus, i deleted and uninstalled all traces of Sophos but looked in console and this is some of the lines coming up:
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.intercheck[6460]) posix_spawn("/Library/Sophos Anti-Virus/InterCheck.app/Contents/MacOS/InterCheck", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.autoupdate[6461]) posix_spawn("/Library/Sophos Anti-Virus/SophosAutoUpdate.app/Contents/MacOS/SophosAutoUpdate", ...): No such file or directory
26/09/13 10:11:17.945 PM com.apple.launchd: (com.sophos.notification[6462]) posix_spawn("/Library/Sophos Anti-Virus/SophosAntiVirus.app/Contents/MacOS/SophosAntiVirus", ...): No such file or directory
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck[6460]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.intercheck) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate[6461]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.autoupdate) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification[6462]) Exited with code: 1
26/09/13 10:11:17.946 PM com.apple.launchd: (com.sophos.notification) Throttling respawn: Will start in 10 seconds
26/09/13 10:11:18.291 PM Safari: self <TabContentView: 0x7f8d5dd1aa50>
26/09/13 10:11:22.617 PM Safari: self <TabContentView: 0x7f8d5db7bb00>
26/09/13 10:11:27.866 PM Safari: self <TabContentView: 0x7f8d5c331a70>
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) posix_spawn("/Library/Sophos Anti-Virus/SophosUIServer.app/Contents/MacOS/SophosUIServer", ...): No such file or directory
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver[6487]) Exited with code: 1
26/09/13 10:12:19.939 PM com.apple.launchd.peruser.501: (com.sophos.uiserver) Throttling respawn: Will start in 10 seconds"
Looked all over computer and cant find anything of Sophos please help very urgent!That was all that there was in the most recent one, how long do you think it could take to fix?
Here is the second most recent:
Wed Sep 25 15:39:39 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81757965, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81acc397fe, CR3: 0x000000001e2b5025, CR4: 0x00000000000606e0
RAX: 0x000000001d31a000, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff80b0dbb710, RBP: 0xffffff80b0dbb820, RSI: 0x0000000000000000, RDI: 0x0000000000000001
R8: 0x000000000000000a, R9: 0x0000000000000378, R10: 0x0000000000000128, R11: 0x0000000000000378
R12: 0xffffff800c626400, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff81acc39802
RFL: 0x0000000000010246, RIP: 0xffffff7f81757965, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff81acc397fe, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80b0dbb3c0 : 0xffffff8000220792
0xffffff80b0dbb440 : 0xffffff80002c4794
0xffffff80b0dbb5f0 : 0xffffff80002da55d
0xffffff80b0dbb610 : 0xffffff7f81757965
0xffffff80b0dbb820 : 0xffffff7f817667a0
0xffffff80b0dbb840 : 0xffffff7f8173a58e
0xffffff80b0dbb870 : 0xffffff7f8177fb6f
0xffffff80b0dbb8a0 : 0xffffff7f81779632
0xffffff80b0dbb8d0 : 0xffffff7f8177d7d5
0xffffff80b0dbb900 : 0xffffff7f8177c6db
0xffffff80b0dbb9e0 : 0xffffff7f817412b8
0xffffff80b0dbba10 : 0xffffff7f81778684
0xffffff80b0dbba30 : 0xffffff7f817449ce
0xffffff80b0dbbb60 : 0xffffff7f81741a4c
0xffffff80b0dbbbc0 : 0xffffff8000655f3e
0xffffff80b0dbbbe0 : 0xffffff800065681a
0xffffff80b0dbbc40 : 0xffffff8000656fbb
0xffffff80b0dbbd80 : 0xffffff80002a3f08
0xffffff80b0dbbe80 : 0xffffff8000223096
0xffffff80b0dbbeb0 : 0xffffff80002148a9
0xffffff80b0dbbf10 : 0xffffff800021bbd8
0xffffff80b0dbbf70 : 0xffffff80002aef10
0xffffff80b0dbbfb0 : 0xffffff80002daec3
Kernel Extensions in backtrace:
com.apple.driver.AppleIntelHD3000Graphics(7.3.2)[A2328231-E577-32FF-B20F-D08BDC FE9C51]@0xffffff7f81738000->0xffffff7f8179bfff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80889000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80d2e000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80cf5000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63b
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 1866666823698
last loaded kext at 480357661446: com.apple.filesystems.smbfs 1.7.2 (addr 0xffffff7f80795000, size 241664)
last unloaded kext at 303348424187: com.apple.driver.AppleUSBUHCI 5.1.0 (addr 0xffffff7f80af7000, size 65536)
loaded kexts:
com.sophos.kext.sav 8.0.14
org.virtualbox.kext.VBoxNetAdp 4.2.16
org.virtualbox.kext.VBoxNetFlt 4.2.16
org.virtualbox.kext.VBoxUSB 4.2.16
org.virtualbox.kext.VBoxDrv 4.2.16
com.logmein.driver.LogMeInSoundDriver 1.0.2
com.Greatdy.driver.SystemAudioCapture 1.0.0
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleIntelHD3000Graphics 7.3.2
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB 7.3.2
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.kext.triggers 1.0
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4 -
Set Page "HEIGHT" ---Very Urgent, Please Help me on this issue. Please.
Hi all ,
Very Urgent, Please Help me on this issue.
when_now_form trigger i set set maximize the window and MDI. And my window and canvas is same height (1500). The formsweb.cfg also changed to 1500. But still I can not view full page on web. Where to I change the properties. Please help.
SelvamIs your form running inside the browser window (with SeparateFrame=False)? If the browser is maximized, and your form is maximized, yet you cannot see the entire screen, you can run with SeparateFrame=True. You can do that on the browser line.
-
Problem in developing webdynpro ABAP ?
Hi all,
I have a problem in execution of my first webdynpro ABAP application.
I did my program based on the instructions given in the given link.
http://www.octavia.de/fileadmin/octavia_files/content_bilder/Hauptnavigation/SAP_NetWeaver/WebDynpro/Web_Dynpro_Part_I.pdf
In doing that program i didn't get any errors,
but while executing its giving error that http:500 internal error.
If any body know how to resolve this issue .
Plz help me in this issue.
ThanksError when processing your request
What has happened?
The URL http://sapserver:8001/sap/bc/webdynpro/sap/zwd_hellosr was not called due to an error.
Note
The following error text was processed in the system DM0 : Die URL enthält keine vollständige Domainangabe (sapserver statt sapserver.).
The error occurred on the application server sapserver_DM0_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: LATE_CONSTRUCTOR of program CL_WDR_UCF====================CP
Method: HANDLE_REQUEST of program CL_WDR_UCF====================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DM0 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapserver_DM0_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server sapserver_DM0_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 800 -u: NEELIMAK -l: E -s: DM0 -i: sapserver_DM0_01 -w: 0 -d: 20101207 -t: 130320 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team -
Making a webdynpro through Web Service| VERY URGENT
Hi ,
I am having a problem in the scenario when I am trying to make a webdynpro application using a WSDL file . When I deploy the application in my first view which is a search view the field appears disabled and I am not able to input the values for the same .I have done the following ...
1) In my action search following is the code
public void onActionSearch(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionSearch(ServerEvent)
wdThis.wdFirePlugToOutputView();
wdThis.wdGetContactTestAgainController().executeSearch();
//@@end
2) in the wdDoInit method of the component controller following is the code
public void wdDoInit()
//@@begin wdDoInit()
Request_Default_siebelContactQueryByExample input =
new Request_Default_siebelContactQueryByExample();
wdContext.nodeRequest_ByExample().bind(input);
//@@end
3) In the execute search method following is the code
public void executeSearch( )
//@@begin executeSearch()
try
wdContext.currentRequest_ByExampleElement().modelObject().execute();
catch(Exception ex)
wdContext.nodeResponse().invalidate();
wdContext.nodeResult().invalidate();
//@@end
The scenario is somewhat like this . There is a proxy class being generated while importing the model by the name "Request_Default_siebelContactQueryByExample" . This class has a list inside . The relevant code for this inside the above mentioned class is as follows
private java.util.List _listOfContactInterface;
public void setListOfContactInterface (java.util.List arg)
this._listOfContactInterface = arg;
public java.util.List getListOfContactInterface ()
return _listOfContactInterface;
public void setListOfContactInterface (com.test.last.proxies.types.Contact[] args)
if(_listOfContactInterface == null) _listOfContactInterface = new java.util.ArrayList();
if (args == null ) return ;
for(int i=0;i<args.length;i++)
com.test.last.ComplexType_Contact wrapper = new com.test.last.ComplexType_Contact ();
wrapper.setOriginalBean(args<i>);
_listOfContactInterface.add(wrapper);
public com.test.last.proxies.types.Contact[] getListOfContactInterfaceAsArray ()
if(_listOfContactInterface == null) return new com.test.last.proxies.types.Contact[]{};
com.test.last.proxies.types.Contact[] ListOfContactInterfaceAsArray = new com.test.last.proxies.types.Contact[_listOfContactInterface.size()];
for(int i=0;i<_listOfContactInterface.size();i++)
com.test.last.ComplexType_Contact item = (com.test.last.ComplexType_Contact)_listOfContactInterface.get(i);
ListOfContactInterfaceAsArray<i> = item.getOriginalBean();
return ListOfContactInterfaceAsArray ;
I think I have to do something to set the values for the input the parameters . There is a field "id" that I am taking as my input but I am not sure how to set this value from the list .May be this is the reason for the whole problem .
Also if there is a cardinality issue then I have checked the context for views and the controller for the same . The cardinality appears to be 0..n for the input model node and 0..1 for the output model node that I have created and in both the cases it appears to be non editable .
This is a very urgent issue and will highly appreciate a prompt reply .
Regards
Deepak SinghHi Deepak,
I was facing the same problem with my webservice, the problem is when u create a model for a webservice, u need to create a webservice through UDDI server. When u create model u will get three option :
1) Local Server
2) Local Server URL
3) UDDI Server URL
U need to select the 3rd option and importing of webservice should be
Import webservice (deprecated) if u are using NWDS version 13.
And also refer this document, and hope your question will answered ..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/696f9c90-0201-0010-0abd-86c6c7454052
All the best
Regards,
Sameer Ali Khan -
SAPscript Output Problem - Very Urgent - Please help
Hi,
I am having the following problem with SAPscript.
In the Main Window, I have instructions to the printer in the ZPL2 language (For Zebra Printer).
There are also several variables, which are highlighted in Gray and enclosed in the&.
There are also several elements all of them empty except for the one where this code is.
Now, I received this program to modify in terms of code and the output.
IF you have never done any work with Zebra Printing, the way it is done is that you create a label using the Zebra BarOne or Zebra Designer program, then output it to an itf file, upload it into a standard text as .itf and copy the uploaded contents to the main window. When printing to a Zebra printer, the Zebra printer will read the instructions and will print the output.
Here is the problem: The config for the output type is correct.
When doing a printing test from SAPscript, I get the right output and the Zebra printer is able to print it.
However, the real process for this task will go through MB02. There, if I create a spool request using the proper method (select output type and etc.), it will go the spool. However, if I print preview or output (doesnt work with the Zebra printer, so I have to output to the Laser printer), it will output the following (none of the following includes any of the ZPL2 code/instructions. Instead, it seams to print the variables contents with the field name next to it This isnt whats its the Main window!!!)
http://img244.imageshack.us/img244/6915/66052475zk2.jpg
Please help. I have debugged but dont know what to do and cant find anything wrong.
This is very urgent. Any help will be useful.
Thanks,
JohnOk, maybe I have confused others in regards to the issue as well.
We expect this label to be output from a Zebra Printer.
When output through Sapscripts printing test, the preview from the spool shows the ZPL2 code in small font (non readible if a created a screenshot) and if sent to the Zebra Printer, it prints the label correctly.
When output through MB02, the preview from the spool shows the code that I have attached to the 1st post in this thread. If I try to output to the Zebra Printer, nothing happens because the ZPL2 instructions are not even in the preview and therefore, the Zebra printer recieves no instructions. I should not have mentioned the laser printer, because it has nothing to do with this issue.
I hope that this makes the issue a little more clear and understandable. Please help.
Here is the ZPL2 coding before uploading to standard text (only difference is that once uploaded, the '/' characters are removed.) However, I believe that the problem may lie in the print program and how it compiles but I debugged and haven't really seen where it comes from:
/:NEW-PAGE
/ ^XA
/ DFNEW-RE-1FS
/ ^PRC
/ LH0,0FS
/ ^LL1830
/ ^MD0
/ ^MNY
/ LH0,0FS
/ FO244,854A0N,55,46CI13FRFB154,1,0,LFN999^FS
/ FO819,698A0N,55,46CI13FRFN998FS
/ FO245,477A0N,55,46CI13FRFB755,1,0,RFN997^FS
/ FO389,926A0N,55,46CI13FRFB654,1,0,RFN996^FS
/ BY3,3.0FO42,1072B3N,N,152,N,YFRFN995FS
/ FO276,1258A0N,55,46CI13FRFN995FS
/ FO484,774A0N,55,46CI13FRFN994FS
/ FO817,774A0N,55,46CI13FRFN993FS
/ FO611,556A0N,55,46CI13FRFN992FS
/ FO245,556A0N,55,46CI13FRFN991FS
/ FO397,117A0N,55,46CI13FRFN990FS
/ FO245,405A0N,55,46CI13FRFB880,1,0,RFN989^FS
/ FO244,698A0N,55,46CI13FRFN988FS
/ FO629,998A0N,55,46CI13FRFN987FS
/ FO244,623A0N,52,42CI13FRFN986FS
/ FO397,261A0N,55,46CI13FRFB404,1,0,RFN985^FS
/ FO819,854A0N,55,46CI13FRFN984FS
/ FO725,554A0N,55,46CI13FRFN983FS
/ FO397,189A0N,55,42CI13FRFB695,1,0,RFN982^FS
/ FO397,333A0N,55,42CI13FRFN981FS
/ FO638,333A0N,55,42CI13FRFN980FS
/ FO391,21A0N,63,63CI13FRFB433,1,0,CFN979^FS
/ FO36,698A0N,55,46CI13FR
/ FDWBS:FS
/ FO37,405A0N,55,46CI13FR
/ FDMATL:FS
/ FO37,478A0N,62,44CI13FR
/ FDDESC:FS
/ FO554,698A0N,55,46CI13FR
/ FDSUPPLIER:FS
/ FO32,625A0N,55,46CI13FR
/ FDTEXT:FS
/ FO35,1258A0N,55,46CI13FR
/ FDBATCH NO:FS
/ FO770,775A0N,63,51CI13FR
/ FD/FS
/ FO32,854A0N,55,46CI13FR
/ FDESHM:FS
/ FO37,556A0N,55,46CI13FR
/ FDQTY:FS
/ FO32,998A0N,55,46CI13FR
/ FDSAP MATERIAL DOC NO:FS
/ FO525,333A0N,55,46CI13FR
/ FDofFS
/ FO556,854A0N,55,46CI13FR
/ FDINSPECT:FS
/ FO32,926A0N,55,46CI13FR
/ FDUNLOADING:FS
/ FO37,117A0N,55,46CI13FR
/ FDSTOCK TYPE:FS
/ FO32,774A0N,55,46CI13FR
/ FDPURCHASE ORDER:FS
/ FO37,188A0N,55,46CI13FR
/ FDDELIVER TO:FS
/ FO37,260A0N,55,46CI13FR
/ FDSTORAGE LOC:FS
/ FO37,332A0N,55,46CI13FR
/ FDCONTAINERS:FS
/ FO1,1359GB1217,0,6^FS
/ FO594,1359GB0,474,6^FS
/ ^XZ
/:NEW-PAGE
/ ^XA
/ ^XFNEW-RE-1.ZPL
/ FN999FD&ATWRT_HAZAMAT(6)&^FS
/ FN998FD&EKKO-LIFNR&^FS
/ FN997FD&MABDR-MAKTX&^FS
/ FN996FD&MSEG-ABLAD&^FS
/ FN995FD&MSEG-CHARG&^FS
/ FN994FD&MSEG-EBELN&^FS
/ FN993FD&MSEG-EBELP&^FS
/ FN992FD&MSEG-ERFME&^FS
/ FN991FD&MSEG-ERFMG&^FS
/ FN990FD&MSEG-INSMK(1)&^FS
/ FN989FD&MSEG-MATNR&^FS
/ FN988FD&MSEG-MAT_PSPNR&^FS
/ FN987FD&MSEG-MBLNR&^FS
/ FN986FD&MSEG-SGTXT(40)&^FS
/ FN985FD&MSEG-UMLGO&^FS
/ FN984FD&QALS-PRUEFLOS&^FS
/ FN983FD&V_BACKORDER&^FS
/ FN982FD&V_NAME3&^FS
/ FN981FD&WS_CNTR&^FS
/ FN980FD&WS_CON&^FS
/ FN979FD&WS_HEADER& &^FS
/ ^PQ1,0,1,N
/ ^XZ
/ ^FX End of job -
Have a big problem with report. Very urgent please help
I have a report rep1. When I run the report via batch thru command rwclient to create a file it failed. I got the follwoing error message:
REP-0177: Error while running in remote server
Job 1413 is terminated due to connection timeout.
It does not even try for few seconds before gives this message. I ran some other batch reports whihc took 15 minutes and they were fine.
So, I stopped running the bad report for the day thinking the report is still not dead. I ran the same rep1 next day I still get the same error message. But this time when I ran I looked at the appserver showjobs (which lists the reports that were running and that already ran). The job number is different But still it fails in 3 seconds with the job number 1413 and connection time out. Can any one tell what might be the problem.
Any number of times I run this job I get the same job number with same error (all this is only if I run it as batch using rwclient). If I run this as online by calling it from a form it returns the results without any problems.
Please help. Very urgent.
Thanks in advance.
AshaYou might want to delete the report server .dat file and restart the server and try
his also could be one of the issues we had seen and fixed in 9.0.2.3. Please ensure you have the latest patch applied
Thanks
The Oracle Reports team
Maybe you are looking for
-
I bought a new computer, I backed up my itunes library on an external hard drive from the old computer. I then uploaded the external hardrive to my new comupeter Windows 8 - How do I access my apple store account to purchase additional music and us
-
I'm having a lot of issues with firefox and cannot figure out how to get help. It began when I updated to 13. I get all kinds of ad popups, I cannot play one game on FaceBook called Farm Town at all, and I keep getting an AVG popup about cookies that
-
How to get date difference in data sources
Hi, In SQL:SELECT DATEDIFF(day, '2005-12-30 23:59:59.9999999', '2005-12-30 00:00:00.0000000'); output :1 As similar way how get the datediffence in SAP business by design of the datasources. Regards, Prasad
-
Charm Configuration for Multiple Landscape
Dear Guru's, We're having 5 landscapes (ECC, BI, etc) and one solution manager system, is it possible to configure ChaRm for the multiple landscape and control those 5 landscape in single solution manager system. Expecting your positive reply. regard
-
Hello, I tried to load an external html page inside the ide but not found the method. If I right click on my project name present in the Project Navigator I can choose the 'New' voice that leave me the possibilities to only load template pages. Is th