Problem in ABAP Client Proxy

Hai All,
I am working on ABAP Client Proxy to RFC.
Here i generated the proxies and wen i execute it i am able to see in sxmb_moni but its showing in Green color which is still in process.but i was unable to find the the receiver business system and receiver interface.
I hope some HTTP connection problem.
Can anyone explain me in detail how to create the http connection as i confused here.
Lets say XI(sender) to R3(Receievr)
where proxy is been created in XI system itself and also generated in XI system only.
Can anyone suggets me here as this interface is totally asynchronous.
Thanks,
Kalyan.

Hai Seshagiri,
Thanks a lot.
Am giving you points buddy.Its working.
Cud u plz give me ur Email id.
This is fine but i want implement this interface to further there i am getting errors.So that i can send u the screenshots of those.
Thanks,
Kalyan.
Please read the Forum's Rules of Engagement,
i.e.,
[/thread/117188 [original link is broken];
and refrain from using email correspondence as the main objective of the Forums is to share knowledge.
SDN PI/XI Forum Moderator

Similar Messages

ABAP client proxy wildcard/unicode problem

Hello,
i have an abap client proxy. The target system is a non sap system. For one input field of the request, a wildcard search is possible (with sign %, field type = string).
If i exceute the proxywith the wildcard sign '%' i get following error message:
SOAP:1.001 CX_SXML_PARSE_ERROR...Error in conversion from UTF-8 to type C or
type CSTRING: 48696C6673736368FC747A65 is not a
valid UTF-8
If i call the target system directly (for examle with jmeter), i get a response even with wildcard sign '%'.
It seems that there is a generell conversion problem at the sap client proxy. Do you have any ideas?
Is the problem maybe the transformation of the request, or the calling of the target system?
Thanks a lot!

any idea?

Facing problem with SOAMANAGER while working on ABAP Client Proxy

Dear Community Friends & Experts,
I am facing a problem with the SOAMANAGER, I think so. Let me explain you a scenario what I am into:
The scenario is like I need to Push data from BI table to SAP PI. We decided to go using ABAP client proxy as Sender and then will
receive it using FTP adapter to FTP address.
I have created Integration repository design object Data types, Message types, interfaces and mapping. Now I am into SAP BI and running SPROXY and generated proxy for my outbound interface. fine.
Till now its okay.Now I wanna my generated proxy to be available within the SOAMANAGER T-code I am not able to find my proxy in the list.
Can anybody send me detailed steps for outbound proxy to SOAMANAGER for creating local port for proxy. I wanna use proxy with WS adapter.
Second Query:
I need to using RSPC in SAP BI to trigger the proxy what code to write with SAP PI 7.0 version.
Can anybody bring some light to this problem...
<h5>Regards,
Gaurav Patwari </h5>

Dear Experts,
Problem solved, cannot say solved but yes its not required now as I am having Client Proxy call so it will be a native call to XI and which does not need SOAMANAGER things.
Thank you all for taking your time and writing answers.
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]
Edited by: GauravPa on Apr 17, 2010 11:32 AM

ABAP Client Proxy from ECC 6.0 to XI message irregular recieving

Hi Gurus
Any one has come across issue whereby the ECC 6 system trigger ABAP Client proxy to SAP PI 7.0. The first time the PI is able to recieve it in the SXI_MONITOR. But subsequent trigger from the ECC 6.0 system the SAP ABAP program to trigger the Client Proxy, the PI seem to lost connectivity and did not recieve any message. This is pretty strange and hopefully someone in SDN and enlighten me.
Thanks
Regards
On behalf of malcolm

Hi Santosh
I went to SMQR and register the queue, but it still did not reflect the locked queue when i trigger the ECC 6 to SAP PI 7.0. The green flag - schedule still appear in the SXMB_MONI queue. But i am quite puzzle as why the ABAP client proxy after sending message the first time and second time, the third time it stuck? And also it is not practical to everytime go to the SMQ1 or SMQ2 to unlock the queue. I don't think it a good solution for solving my problem, it is just a temporary solution.

Fault message handling in abap client proxy

Hi experts,
i have scenario like this SAPECC---XI---WEBservice
i was decided to using the ABAP CLIENT proxy in sender side and soap adapter communication in receiver side
i will be get the wsdl file form client
problem is i am in bit of confusion like am i need to create fault message for this asychronous scenario?
how can i create the fault message for this scenario(that WSDL) and how the abaperwill handle those error
thanks in advance

Hi.
You can use fault message but it won´t return a error to your ABAP Proxy because your interface is ASSYNC. The fault message generated will stop in Adapter Engine.
If you need a return of the error, you have to change your interface to Sync mode.
To get more information, follow the link below:
Fault Message Type
http://help.sap.com/saphelp_nwpi711/helpdata/en/dd/b7623c6369f454e10000000a114084/frameset.htm
Best Regards.
Bruno

ABAP client proxy from WSDL

I have 2 problems in creating abap client proxies using wsdl
1.when i try to create client proxy by giving RPC style wsdl(generated by SAP itself for a RFC) the system throws an error and not allowing to create the proxy
2.The client proxy which i have created for a wsdl(either SAP created document type/any wsdl from commercial websites) gives an error "No receiver could be found"
could somebody please clarify and help me to solve the problem.
Thanks in advance.
Vasanth.

Hi Vasanth,
There are many threads and blogs on this topic.
Choose the search Forum on the Forum page and select "All categories" in the Category field and enter your topic "ABAP client proxy from WSDL" in the search field.
Rgds,
Sam Raju

ABAP Client Proxy without Commit

Hi everyone,
we want to implement a web service call using an ABAP Client Proxy. The Problem is, that this call is in the middle of a transaction and we may not execute an implicit COMMIT WORK by using the proxy class.
Does anyone know how to prevent such a COMMIT?
Thank you for feedback

Hi Julio
I understand the situation.
Ask basis if the PI system is configured as Integration server. even you can check this but basis can confirm on this. In that case you need to have another client which can work as R/3 for you. Then you can proceed with ABAP proxies on the client.
Now coming back to what i can think of a work around. When a target system fails PI will retry and end up as System failure. This system failure can be retrieved from SXMB_MONI tables. Now if you create a ABAP report which pics all records with Status = "SYS_FAIL" and reprocess (which is a inbuilt functionality) then you can make RFC call to this report which can end up reprocessing and can give response for Success for Failure or any reprocess. This you can use in BPM.
Make sense ..
Thanks
Gaurav

ABAP client proxy 401 error

Hi i have generated a ABAP client proxy in my ECC system and sending an outbound message to XI. i get the following error.
HTTP response contains status code 401 with the description Unauthorized Error while sending by HTTP (error code: 401, error text: Unauthorized)
I have tested the following.
1) My sld and ECC system have the integration engine and pipeline settings for the XI Server: http://server:8000/sap/xi/engine?type=entry
2) logon to the URL http://server:8000/sap/xi/engine with user XIAPPLUSER and pwd in the browser because of the error 'Der Aufruf der URL http://server:8000/sap/xi/engine wurde aufgrund fehlerhafter Anmeldedaten abgebrochen'
any sugestions ? using a proxy as target works fine

Hi ,
You seem to have a problem with the XIAPPLUSER logon. Can you check that the user has the appropriate authorizations? Maybe the user is locked? Maybe the password has been incorrectly entered?
XIAPPLUSER should have the role SAP_XI_APPL_SERV_USER.
Also, check that the XI engine service has been activated.
Transaction SICF. Default_host->sap->xi Activate the entire node with all subtrees.
Cheers
Manish

ABAP client proxy send message fialed

I developed one ABAP client proxy to send msg. status in SXMB_MONI is error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
After I test it in RWB,I'm sure that IR and ID is right. Then what's wrong?

> There are two scenarios with the same outbound interface.Is it the problem?
>
> ABAP proxy send message, and then there are two route.
Yes this could be the reason, because at the time of Receiver Determination it tries to send the message to both the interface. Are both the scenario Proxy to XI??
Try to change the Message Interface in IR and accordingly change in ID also and then try.
Regards,
Sarvesh
Edited by: Sarvesh Singh on Oct 17, 2008 2:24 PM

ABAP Client proxy message not reaching AAE

Hi Experts,
I am facing a strange issue in one of my proxy interfaces. ABAP client Proxy is used to post message to AAE in SAP PI 7.3. The messages are being generated and pushed out of ECC successfully. I can see them in the SXMB_MONI t-code with checkered flag. These messages are reaching the Integartion Engine instaed of the Adapter Engine.
I have configured the following:
1. Sender / Receiver ID in SXMSIF:
2. Configured the corresponding Runtime parameter in SXMB_ADM
I have few other such ABAp client proxy i/f's which work fine and their message are being sent to the Adapter engine. Howveere, only this one interface is posing a problem. What can be the issue?
Please advice.
Thanks in advance.
Elizabeth.

Hi Elizabeth,
It will be great if you could please let me know all the user profile configured in userID of Logon&Security tab of SM59 for connecting ECC system to post the message via AAE.
I have used
SAP_XI_APPL_SERV_USER
SAP_XI_DEVELOPER_J2EE and
SAP_XI_IS_SERV_USER
profiles in my UserID for Basic authentication.
Currently I am doing the same scenario what you have done with integrated configuration.The message is getting failed in ECC with 403 Forbidden error.
Please help me.
Thanks
Ray...

ABAP client Proxy authentication required

Hallo, my problem is about ABAP client Proxy authentication.
Scenario:
Our Dev. BW MWDCLNT600 queries forward a (RetailPro) database (JDBC Receiver C.Channel), by Dev. XI , in order to "drive" data extraction (realized, backward, from RetailPro to BW).
Forward communication from BW uses a call on ABAP Client Proxy technology (I mean, a BW class implements an XI outbound Message Interface).
Problem:
Something changed, we don't know what or where, and since last week everytime you execute the report (F8) you are prompted for an authentication popup.
Official manual guide is: (ABAP Proxy Generation)
http://help.sap.com/saphelp_nw04/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
in which you have to manage the 2 properties for credential supplying:
com.sap.aii.applicationsystem.serviceuser.name
com.sap.aii.applicationsystem.serviceuser.pwd
in order to "drive" authentication to Integration Engine.
In our scenario, ABAP report ZRTP_FLOW_CONTROL drives data extraction query, by a call to execute method
of class: ZCO_MI_FLOW_CONTROL_OB
which implements Outbound MI: MI_Flow_Control_OB (...all in SPROXY).
In SXMB_ADM, XI IEngine URL is correct...
In Exchange Profile, the 2 properties (see above) are correctly maintained (user: XIAPPLUSER, and password is OK)
Any suggestion?
Thanks all in advance!
Gianluca

Hi
I would like to suggest you to change the password in http destination (sm59) configured to comunicate with XI and put another one using UPPER case only. Another thing to check is tx SLDAPICUST. There is a problem in this transaction (I think it is a problem, maybe it's a feature , you need to use password with UPPER there to, and you need to double save the data there (change something, click save, change another thing, click save, and will work, otherwise not). Check tx SLDCHECK to see if connection with SLD and Integration Directory are ok.
Regards.
Roberti

Exception when creating ABAP client proxy using WSDL

Hi Experts,
I tried to create a client proxy on the CRM system for a web service URL (where the WSDL exists), in the transaction SE80.
When I tried creating this, i got exception as follows.
Exception occured in communication framework:error in HTTP framework:404 conn failed http://inld50054696a:8080/clearspace/rpc/rest?forumservice?wsdl
Please let me know, how to tackle this problem.
What are all the settings that needs to be done in this regard.
Regards
Lakshman

Hi Vasanth,
There are many threads and blogs on this topic.
Choose the search Forum on the Forum page and select "All categories" in the Category field and enter your topic "ABAP client proxy from WSDL" in the search field.
Rgds,
Sam Raju

Error With ABAP Client proxy

Hi All,
   I am trying to use ABAP Client Proxy(Sync). I am getting the error.
1. Message from SXMB_ADMIN on Business system.
<b> <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="400" p2="ICM_HTTP_CONNECTION_FAILED" p3="" p4="">HTTP.HTTP_CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:Text language="EN">Error during http receive: Error code: 400 Error text: ICM_HTTP_CONNECTION_FAILED</SAP:Text>
</SAP:ErrorHeader></b>
2. No message On XI server.
3.Went through the Ravikumar Allampallam's blog
on ABAP ClientProxy .
4. Went through the vijaya kumari's " How do you activate ABAP Proxies?"
5. created connections (sld)and one http connections in SM59. Tested the connections.
6. Went throught the Forms.
Any help would be appriaciated.
Thank you
Ganges Leaves.

Vijaya Kumari,
   1. I have checked it. For XI server these are the values.
    Business System Role : Integration Server.
    Pipe Line url : http://server:8000/sap/xi/engine?type=entry.
8000 is the http port which i see in the SMICM+shift F1.
Thank you
Ganges Leaves

How does ABAP client proxy determine the sender business system

When we use ABAP client proxy to send a message in XI-SOAP format to the integration engine, how does the client proxy determine what is the sender business system, i.e. how does it know what value it should insert in the sender service field in the SOAP envelop.
For example, at first, the business system X8A_105 corresponds to the technical system X8A_105, so when the client proxy sends out a message, the sender service is X8A_105. Then I delete the business system X8A_105 in the SLD, and create a new business system that is associated with the technical system X8A_105.when the client proxy sends out a message, the sender_service is still X8A_105, why?

Hi Annie,
Execute the following function module in your business system and see what name it returns..
LCR_GET_OWN_BUSINESS_SYSTEM.
You can always debug the code inside the above FM to find out how it gets the business system name...
I think the issue should be related to cache. I would also suggest you to logoff from your business system and then login again.
Regards,
Sumit
Message was edited by:
Sumit Khetawat

ABAP client proxy to File scenario

Hi,
I am doing ABAP client proxy to File scenario.
I have followed Ravikumar allampallam blog i.e https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1387. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
My abap proxy has successfully created 4 objects:
1)ABAP Class ( ZCO_ MIOA_ABAP_PROXY).
2. Structure for the message type in ABAP Data Dictionary (ZMT_PROXY).
3. Structure for the data type in ABAP Data Dictionary (ZDT_PROXY_SRC).
4) Table type (ZSTRING_TAB).
can u tell me how can i fetch data from database table into structure?

Hi,
see first create the data type,msg type, msg interface and go to R3 instance of Xi and use SPROXY transaction , locate your SWCV,namespace, intreface ( outbound) and create the proxy , later give the name starts with z, later in ABAP program create the internal table of type of the Structure for the message type in ABAP Data Dictionary (ZBLOGEMP_PROFILE_MSG )
so follow the code and explained about each ob, structure of Msg ..
Regards
Chilla

Problem in ABAP Client Proxy

Similar Messages

Maybe you are looking for