Problem in absent report(ABAP-HR)

Hi to all
I am getting a problem in Absent report.(HR-ABAP)
Absent report shows next day irregular punch in case of  'C' shift(Timing 10:30 PM to 6:30 AM)  at the end of month.
It happens only at the end of month like 31/10/2007 because in selection we gave
1/10/2007 to 31/10/2007.
Plz tell me what to do.
Regards
Anubhav

Hi,
It is not possible to run RBDMIDOC Report in Insert mode, precisely the purpose of this report is to send only the delta changes recorded in change pointers (that is only the differences since the last replica) and it is used not just for HRMD_ABA Message Type, also for other Modules, like Cost Center, Materials, etc.
I understand that PFAL is not useful as it requires the specification implied of the objects.
According with the way HR structure Replica works, you replicate with PFAL all the objects you requiere as an initial replica, and then programs BD21 as a job to get the delta changes in the destination system.
Regards,
Edith

Similar Messages

  • Problems in Z Reports in ECC 6.0

    Hi,
    We r upgrading the SAP from 4.7 E to ECC 6.0 and facing few problems in Z Reports in New Version..Like...
    1)..Incorrect value in the dynamic table..
    2)..Literals that take up more than one line not permitted.
    3)..Missing parameter with PERFORM.
    4)..Error in ASSIGN statement in program "SAPLSDSD".
    5)..Not Unicode Convertible.
    Please help me out of these problems..
    Regards,
    Anil

    Hi,
    regarding your problems the solution is that in ECC 6.0 the programs should be unicode compatible.the fields which are declared with type
    were no more allowed in 6.0.
    regarding unicode u can check the following threads..
    What is the Use of Unicode Check
    SDN Wiki - Standard Reference for Unicode Migration-Common ABAP Errors & Solution
    SDN Wiki - Standard Reference for UNICODE PROBLEMS and SOLUTIONS

  • Problem in ALV report

    Hi Friends,
    I have the following 2 problems in ALV report
    1) Logo is not getting displayed in the report.
    2) When i click on the Purchase order number in the report  the interactive report is not working,i am not able to see report of First interactive level.
    can you help it out friends.
    Thanks and regards
    Dinesh
    REPORT  YSDBALV1
    tables: ekko , ekpo .
    type-pools: slis .
    Table for Display Header
    data:i_header type slis_t_listheader with header line.
    *Fieldcat Declaration
    data:fieldcatalog type slis_T_fieldcat_alv  WITH HEADER LINE.
    *Table of Events
    data:i_event type slis_t_event with header line .
    For Layout
    data:i_layout type slis_layout_alv .
    data: text(30) .
    *Internal Table Declaration
    data: begin of it_final occurs 0 ,
          ebeln like ekko-ebeln ,           "Purchasing Document No.
          bedat like ekko-bedat ,           "Purchasing Document Date
          matnr like ekpo-matnr ,           "Material No.
          netwr like ekpo-netwr ,         "Net Order Value in PO Currancy
          meins like ekpo-meins ,           "UOM
          chk(1) ,
          light(1) ,
          change like ekpo-menge ,
          end of it_final .
    **select option Declaration
    selection-screen begin of block block.
    select-options: s_ebeln for ekko-ebeln  .
    selection-screen end of block block .
    selection-screen begin of block block1 .
    parameters:grid radiobutton group r .
    parameters:list radiobutton group r .
    selection-screen end of block block1 .
    at selection screen
    at selection-screen .
    select single * from ekko where ebeln in s_ebeln .
    if sy-subrc <> 0 .
       message e000(8I) WITH 'No Data Exists' .
    endif .
    start-of-selection .
    if grid = 'X' .
    perform get_data .
    perform event using i_event[] .
    perform field using fieldcatalog[] .
    perform layout using i_layout .
    perform grid_display .
    endif .
    *&      Form  get_data
          text
    -->  p1        text
    <--  p2        text
    form get_data .
    *DATA Retrieval from tables
    SELECT EKKO~EBELN
           EKKO~BEDAT
           EKPO~EBELP
           EKPO~MATNR
           EKPO~NETWR
           EKPO~MEINS
           EKPO~MENGE
           EKPO~BPRME
           INTO CORRESPONDING FIELDS OF  table IT_FINAL
           FROM EKKO INNER JOIN EKPO ON EKKOEBELN = EKPOEBELN
           WHERE EKKO~EBELN IN S_EBELN.
           APPEND IT_FINAL.
    endform.                    " get_data
    *Getting the Event for Top of Page display.
    *&      Form  event
          text
         -->P_I_event[]  text
    form event  using    p_i_event type slis_t_event.
      clear p_i_event .
      refresh p_i_event .
    CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
       I_LIST_TYPE           = 0
       IMPORTING
         ET_EVENTS             = p_i_event
    EXCEPTIONS
       LIST_TYPE_WRONG       = 1
       OTHERS                = 2
    read table p_i_event with key name = slis_ev_top_of_page into i_event.
          if sy-subrc = 0.
                 move 'TOP_OF_PAGE_PO' to i_event-form.
                 modify p_i_event from i_event index sy-tabix transporting form.
          endif.
          clear i_event.
    endform.                    " event
    *Display Top-of –Page Details and Logo
    form top_of_page_po .
           clear i_header .
           refresh i_header .
           write sy-datum to text.
           i_header-typ = 'H'.
           i_header-info = 'PURCHASE OREDER DETAILS'.
           append i_header.
          *Logo Display
          CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
                 EXPORTING
                     it_list_commentary       = i_header[]
                     I_LOGO                   = 'ENJOYSAPLOGO'.
    endform .
    *Field Catalog Append
    *&      Form  field
          text
         -->P_fieldCATALOG[]  text
    form field using  p_fieldcatalog type slis_t_fieldcat_alv.
         clear fieldcatalog.
          fieldcatalog-fieldname   = 'EBELN'.
          fieldcatalog-seltext_m   = 'Purchase Order No'.
          fieldcatalog-col_pos     = 1.
          append fieldcatalog .
          clear fieldcatalog.
          fieldcatalog-fieldname   = 'BEDAT'.
          fieldcatalog-seltext_m   = 'PO Date'.
          fieldcatalog-col_pos     = 2.
          append fieldcatalog .
          clear fieldcatalog.
          fieldcatalog-fieldname   = 'MATNR'.
          fieldcatalog-seltext_m   = 'Material No'.
          fieldcatalog-col_pos     = 4.
          fieldcatalog-outputlen   = 20.
          append fieldcatalog .
          clear fieldcatalog.
          fieldcatalog-fieldname   = 'NETWR'.
          fieldcatalog-seltext_m   = 'Net Value '.
          fieldcatalog-col_pos     = 5.
          fieldcatalog-outputlen   = 20.
          fieldcatalog-do_sum = 'X'.
          append fieldcatalog .
          clear fieldcatalog.
          fieldcatalog-fieldname   = 'MEINS'.
          fieldcatalog-seltext_m   = 'Units'.
          fieldcatalog-col_pos     = 6.
          fieldcatalog-outputlen   = 4.
          append fieldcatalog .
          clear fieldcatalog.
    endform.                    " field
    *&      Form  layout
          text
    form layout  using    p_i_layout TYPE SLIS_LAYOUT_ALV .
    i_layout-zebra  = 'X'.
        i_layout-lights_fieldname = 'LIGHT'.
        i_layout-lights_tabname = 'IT_FINAL'.
        i_layout-box_fieldname = 'CHK'.
        i_layout-box_tabname  = 'IT_FINAL'.
        i_layout-edit = ' '.
    endform.
    *To display Buttons in the MENU BAR if needed
    FORM SET_PO_PF_STATUS USING  P_I_EXTAB TYPE
                     SLIS_T_EXTAB.
                     SET PF-STATUS 'MENUPO'.
      ENDFORM.
    *Event for Interactive display of ALV report
    form USER_COMMAND  using r_ucomm like sy-ucomm
                             rs_selfield type slis_selfield .
      if r_ucomm = '&IC1'.
      READ TABLE IT_FINAL  index   rs_selfield-tabindex.
      write:/ IT_FINAL-ebeln.
      endif.
    endform .
    *Parameters of FM  REUSE_ALV_GRID_DISPLAY
    *&      Form  grid_display
          text
    -->  p1        text
    <--  p2        text
    form grid_display .
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        I_CALLBACK_PROGRAM                = SY-REPID
       I_CALLBACK_PF_STATUS_SET          = 'SET_PO_PF_STATUS'
        I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
        IS_LAYOUT                         = I_LAYOUT
        IT_FIELDCAT                       = FIELDCATALOG[]
        IT_EVENTS                         = I_EVENT[]
      TABLES
        t_outtab                          = IT_FINAL.
    endform.                    " grid_display

    *& Report  YSDBALV1
    REPORT  YSDBALV1.
    tables: ekko , ekpo .
    type-pools: slis .
    Table for Display Header
    data:i_header type slis_t_listheader with header line.
    *Fieldcat Declaration
    data:fieldcatalog type slis_T_fieldcat_alv WITH HEADER LINE.
    *Table of Events
    data:i_event type slis_t_event with header line ,
         wa_event type line of slis_t_event.
    For Layout
    data:i_layout type slis_layout_alv .
    data: text(30) .
    *Internal Table Declaration
    data: begin of it_final occurs 0 ,
    ebeln like ekko-ebeln , "Purchasing Document No.
    bedat like ekko-bedat , "Purchasing Document Date
    matnr like ekpo-matnr , "Material No.
    netwr like ekpo-netwr , "Net Order Value in PO Currancy
    meins like ekpo-meins , "UOM
    chk(1) ,
    light(1) ,
    change like ekpo-menge ,
    end of it_final .
    **select option Declaration
    selection-screen begin of block block.
    select-options: s_ebeln for ekko-ebeln .
    selection-screen end of block block .
    selection-screen begin of block block1 .
    parameters:grid radiobutton group r .
    parameters:list radiobutton group r .
    selection-screen end of block block1 .
    at selection screen
    at selection-screen .
    select single * from ekko where ebeln in s_ebeln .
    if sy-subrc <> 0 .
    message e000(8I) WITH 'No Data Exists' .
    endif .
    start-of-selection .
    if grid = 'X' .
    perform get_data .
    perform event using i_event[] .
    perform field using fieldcatalog[] .
    perform layout using i_layout .
    perform grid_display .
    endif .
    *& Form get_data
    text
    --> p1 text
    <-- p2 text
    form get_data .
    *DATA Retrieval from tables
    SELECT EKKO~EBELN
    EKKO~BEDAT
    EKPO~EBELP
    EKPO~MATNR
    EKPO~NETWR
    EKPO~MEINS
    EKPO~MENGE
    EKPO~BPRME
    INTO CORRESPONDING FIELDS OF table IT_FINAL
    FROM EKKO INNER JOIN EKPO ON EKKOEBELN = EKPOEBELN
    WHERE EKKO~EBELN IN S_EBELN.
    APPEND IT_FINAL.
    endform. " get_data
    *Getting the Event for Top of Page display.
    *& Form event
    text
    -->P_I_event[] text
    form event using p_i_event type slis_t_event.
    clear p_i_event .
    refresh p_i_event .
    CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
    I_LIST_TYPE = 0
    IMPORTING
    ET_EVENTS = p_i_event.
    EXCEPTIONS
    LIST_TYPE_WRONG = 1
    OTHERS = 2.
    read table p_i_event with key name = slis_ev_top_of_page into wa_event.
    if sy-subrc = 0.
    move 'TOP_OF_PAGE_PO' to i_event-form.
    modify p_i_event from i_event index sy-tabix transporting form.
    endif.
    clear i_event.
    endform. " event
    *Display Top-of –Page Details and Logo
    form top_of_page_po .
    clear i_header .
    refresh i_header .
    write sy-datum to text.
    i_header-typ = 'H'.
    i_header-info = 'PURCHASE OREDER DETAILS'.
    append i_header.
    *Logo Display
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
    it_list_commentary = i_header[]
    I_LOGO = 'ENJOYSAP_LOGO'.
    endform .
    *Field Catalog Append
    *& Form field
    text
    -->P_fieldCATALOG[] text
    form field using p_fieldcatalog type slis_t_fieldcat_alv.
    clear fieldcatalog.
    fieldcatalog-fieldname = 'EBELN'.
    fieldcatalog-seltext_m = 'Purchase Order No'.
    fieldcatalog-col_pos = 1.
    append fieldcatalog .
    clear fieldcatalog.
    fieldcatalog-fieldname = 'BEDAT'.
    fieldcatalog-seltext_m = 'PO Date'.
    fieldcatalog-col_pos = 2.
    append fieldcatalog .
    clear fieldcatalog.
    fieldcatalog-fieldname = 'MATNR'.
    fieldcatalog-seltext_m = 'Material No'.
    fieldcatalog-col_pos = 4.
    fieldcatalog-outputlen = 20.
    append fieldcatalog .
    clear fieldcatalog.
    fieldcatalog-fieldname = 'NETWR'.
    fieldcatalog-seltext_m = 'Net Value '.
    fieldcatalog-col_pos = 5.
    fieldcatalog-outputlen = 20.
    fieldcatalog-do_sum = 'X'.
    append fieldcatalog .
    clear fieldcatalog.
    fieldcatalog-fieldname = 'MEINS'.
    fieldcatalog-seltext_m = 'Units'.
    fieldcatalog-col_pos = 6.
    fieldcatalog-outputlen = 4.
    append fieldcatalog .
    clear fieldcatalog.
    endform. " field
    *& Form layout
    text
    form layout using p_i_layout TYPE SLIS_LAYOUT_ALV .
    i_layout-zebra = 'X'.
    i_layout-lights_fieldname = 'LIGHT'.
    i_layout-lights_tabname = 'IT_FINAL'.
    i_layout-box_fieldname = 'CHK'.
    i_layout-box_tabname = 'IT_FINAL'.
    i_layout-edit = ' '.
    endform.
    *To display Buttons in the MENU BAR if needed
    FORM SET_PO_PF_STATUS USING P_I_EXTAB TYPE
    SLIS_T_EXTAB.
    SET PF-STATUS 'MENUPO'.
    ENDFORM.
    *Event for Interactive display of ALV report
    form USER_COMMAND using r_ucomm like sy-ucomm
    rs_selfield type slis_selfield .
    if r_ucomm = '&IC1'.
    READ TABLE IT_FINAL index rs_selfield-tabindex.
    set parameter id 'VL1' field it_final-ebeln.
    call transaction 'ME23N'.
    endif.
    endform .
    *Parameters of FM REUSE_ALV_GRID_DISPLAY
    *& Form grid_display
    text
    --> p1 text
    <-- p2 text
    form grid_display .
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    I_CALLBACK_PROGRAM = SY-REPID
    I_CALLBACK_PF_STATUS_SET = 'SET_PO_PF_STATUS'
    I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
    IS_LAYOUT = I_LAYOUT
    IT_FIELDCAT = FIELDCATALOG[]
    IT_EVENTS = I_EVENT[]
    TABLES
    t_outtab = IT_FINAL.
    endform. " grid_display
    Regards,
    Rusidar S.

  • Problems accessing BW Report from Portal

    Hello friends,
    I have a problem. I am trying to create a link in portal that should call a BW Report. To do this we should require the query string which I have. The problem is this report in turn is calling a separate transaction code from a different back end system. When the user tries to execute the report he is getting the following error code
    ICF-NF-http-c:000-u:SAPSYS-I:E-i:wwbsap06_DEV1_22-v:0-s:403-r:Forbidden
    Can anyone tell me how this can be achieved?
    Points guaranteed.
    Thank You
    Avik

    You can use SAP Web dispatcher for exposing the BW web reports to extranet. The SAP Web dispatcher is located between the Web client (browser) and your SAP system that is running the Web application.
    http://help.sap.com/saphelp_nw04/helpdata/en/42/5cfd3b0e59774ee10000000a114084/content.htm

  • Problem in exporting report in CSV format

    Hi All,
    I am using Crystal Reports. Following are details about it:
    CR Developer
    Product 8.5.0.217
    *_Problem that I am facing:__*_
    I can create report in .rpt format, it is working fine here. But while trying to export this report in CSV format, it gives report that doesn't contain any information.
    Is it because I am missing something or it is a known issue?
    Thanks and Regards,
    Anand

    Hi,
    I too am facing the same problem.
    The report was made in 8.5. I have exported the report & opened it in Crystal report 12.
    I can export to PDF, RTF, DOC & Tab separated Test.
    However when I export this report in .csv (legacy mode) I just get the header & when I export it in .csv (Standard) I get a blanck .csv file.
    I have  checked 'Isolate Report/Page sections' and 'Isolate Group sections'. Still no data in the report.
    refreshed it too.
    I contains sub reports, but not in the page header & footer (I think) & it does not seem to have cross tabs & OLAP grids.
    Any help is appreciated.
    Links to Screenshots:
    Main Report:
    http://picasaweb.google.com/lh/photo/yM9sBexKt5jW9soqaMmHjw?feat=directlink
    One of the Sub-Report:
    http://picasaweb.google.com/lh/photo/0ofa5sABakvZ-nFZp-JSMw?feat=directlink

  • Problem in Crystal Report 2008 selectionFormula

    Post Author: saro_j
    CA Forum: Crystal Reports
    Hi,
    I am having a strange problem in Crystal report 2008. Earlier I was using VS 2005 Crystal report. Then we purchased Crystal report 2008.
    When I open the VS 2005 projects it asks the reports to convert into Crystal report 2008. I did that.
    Earlier I was using the following syntax for passing the date as selectionFormula
    Dim selectionFormula As String = "{tblClient.Name} = '" & ddlClient.SelectedItem.Text & "' and {TBILL_File_Format.Week Ending Date} = #" _& Convert.ToDateTime(DtCtrlProDateFrom.DateTimeValue) & "#u201D WeeklyReportByClientNameReport.DataDefinition.RecordSelectionFormula = selectionFormula
    But now when I run this same it says
    This field name is not known. Details: errorkind Error in the file rptWeeklyReport.rpt: Error in formula Record_selection: 
    u2018{tblClient.Name} = 'ABC10' and "{TBILL_File_Format.Week Ending Date} = #04/20/2008#u2019 This field name is not known. Details: errorkind
    I have no idea about this
    Even If I tried to pass as follows
    selectionFormula = "{TBILL_File_Format.Week Ending Date} = DateTime (2008, 04, 25, 00, 00, 00) and {TBILL_File_Format.Client Code} = 'ABC10' "
    I couldnu2019t see any record on the report except Grouptree of the report. If I export the report it has all the data as I expected.
    Please help me out on this regards.
    Thanks in advance
    Saravanan

    Post Author: jehanzeb
    CA Forum: Crystal Reports
    Hello,
    I use CR2008 and VS2005, it never asked me to convert the file into VS2005. What do you mean by VS 2005 asked you to convert the file? Did you make the file in CR2008 and then imported it into VS2005 as a Report Document?
    I usually create a report on CR2008 and then move that report (copy) to the same folder as VS project folder, then from there I create a new Report Doc in VS and open the file.
    As you mentioned when you export the report it works fine but when you run it it gives errors. I think it is because of the import of the report. Look at the error message as it says the field name is not known, I suspect it is not connected/imported properly.
    "This field name is not known. Details: errorkind Error in the file rptWeeklyReport.rpt: Error in formula Record_selection: 
    u2018{tblClient.Name} = 'ABC10' and "{TBILL_File_Format.Week Ending Date} = #04/20/2008#u2019 This field name is not known. Details: errorkind"
    I think it is becasue of the import of the report or could be becasue you didnt save the report with an option of "save report data". Check your report and reimport it. might fix the problem:D

  • I've checked my current plugins and it still shows Adobe Acrobat Version 7 for Netscape (7.0.9.50) I tried to do the update but I got an error - "Please tell Microsoft about this problem" "Send Error Report/ Don't Send".

    I've checked my current plugins and it still shows Adobe Acrobat Version 7 for Netscape (7.0.9.50)
    I tried to do the update but I get the same error each time - "Please tell Microsoft about this problem" "Send Error Report/ Don't Send".
    Also, do I need to Disable or Uninstall the Extension: "SEO For Firefox 3.3.4 as this was highlighted?
    == This happened ==
    Every time Firefox opened
    == When I try to do the update

    http://www.microsoft.com/mac/support
    http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

  • Problem showing BI report in SAP CRM 7.0

    Problem showing BI report in SAP CRM 7.0
    We are facing a problem in our SAP CRM, when we show a BI report in the fact sheet we can see the report correctly.
    But when we click on the match code of the query, (in order to choose a value from the help) the popup does not appear and we got the error u201Caccess denied     popup_ie6.jsu201D
    Any help?
    Thank you in advance.

    Hi,
    Please check the service patch for BW.
    In our S/m it is working Fine.
    SAP_BW     701     0003     SAPKW70103     SAP Business Warehouse
    BI_CONT     704     0003     SAPK-70403INBICONT     Business Intelligence Content
    Regards,
    Lokesh.

  • Date format Problem in forms&reports Services 10g

    Hi Dears,
    I Faced a problem during running reports ( i am using forms& Reports Services 10g), when i pass the parameters via parameter form to the report (built in forms10g Rel 2.0) its appearing in arabic like (25-يناير-2010) as my Date Formate is (DD-YYYY-MON) and NLS_LANG parameter is defined as Arabic_Saudi arabia.AR8MSWIN1256 so as a result report is not running due to unknown Date formate, how can i change the Same Date format (DD-YYYY-MON) to appear in english like (25-2010-JAN)
    Thanks

    You could specify the parameter as type VARCHAR2, explicitly cast it (maybe to DD.MM.YYYY) when you pass it from forms and cast it back in your query, like TO_DATE(:P_PARAM, 'DD.MM.YYYY')

  • How to solve  problem :- rep-188-Report Server acccepts only Batch jobs

    How to solve problem :- rep-188-Report Server acccepts only Batch jobs
    Report server :- 10gR1

    Hello,
    Could you give us some details about the command line ?
    What is the value of DESTYPE ?
    Regards

  • Process Chain - Multi Event in Report ABAP

    Hi,
    I should build a ProcessChain containing a report ABAP that verify the existence of 3 files on the directory and what in base to the event performs a process type or another. How am I able to set the Interface IF_RSPC_MULTI_EVENT and to pass the parameter from report ABAP for multi_event ?
    Thank You.

    Hi
    Toi integrate an abap program in a process chain it's not necessary to modify the abap object logic. It's necessary to insert  a Object ABAP Program
    check this link for a typical example of abap programming in process chains
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
    Andrea

  • Problem after run report with spreadsheet

    hi evry one
    ther an a problem after run report with spreadsheet .
    after runing iexplorar open and close fast no thing else
    when i check the job from appserver job success with spreadsheet dis format.
    what shall i do.
    thanks.

    Hello,
    Do you use the Oracle Forms builtin WEB.SHOW_DOCUMENT ?
    If yes , take a look to : "IE7 windows opened and closed immediatly"
    http://www.experts-exchange.com/Software/Internet_Email/Web_Browsers/Internet_Explorer/Q_23304982.html
    You can test the solution suggested :
    We have found the setting that we needed, under the Internet Options
    Security tab, if you select the internet zone, and click the custom level
    button, then scroll down to the Downloads section, the first option is
    Automatic prompting for file downloads, setting this to enable keeps IE 7
    from interfering with this sort of download.
    Regards
    Example with screen shots :
    http://www.celt.iastate.edu/webct/securitysettings.html
    Regards

  • Problems with a report generated as PDF

    I am having a problem with my report when it is generated as a PDF file from the reports server. A space is added soon after the letter w in all the words where there is letter w; for example, the word awake appears as aw ke, will appears as w ill, etc. Does anyone know how to fix this problem? I am using Reports 11g. Thanks.

    Hi
    In layout change the font (Redo font) thru menu option (Not Font) Format -> Font >Western.
    This may solve your problem...
    user8655468 wrote:
    I am having a problem with my report when it is generated as a PDF file from the reports server. A space is added soon after the letter w in all the words where there is letter w; for example, the word awake appears as aw ke, will appears as w ill, etc. Does anyone know how to fix this problem? I am using Reports 11g. Thanks.

  • Problem in crystal reports

    Hello
    i have a problem in crystal report, i want to dispaly data from MYSql data base to crystal report through my application
    I have'nt work on crystall report before this
    please help me.....
    thanks in advance

    Some forums to try (or for someone who might land on this thread):
    http://www.bing.com/search?q=crystal+reports+forum
    http://forums.asp.net/76.aspx/1?Crystal+Reports
    http://www.crystalreportsbook.com/forum/default.asp
    http://scn.sap.com/community/crystal-reports-for-visual-studio/
    http://forums.codeguru.com/forumdisplay.php?64-Crystal-Reports
    Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • The problem with forecast reports in SCOM 2012 after integration with VMM 2012

    Hello.
    I have problem with forecast reports in SCOM 2012 after integration with VMM 2012. All other reports (not forecasting) works fine. For example, report “Host Group Forecasting” don’t work. The report is generated, but I have error: “Subreport
    could not be shown”. I find only errors in SQL Server Reporting logs like this:
    library!ReportServer_0-13!1758!06/26/2012-18:26:23:: i INFO: RenderForNewSession('/Microsoft.SystemCenter.VirtualMachineManager.2012.Reports/Microsoft.SystemCenter.VirtualMachineManager.2012.Report.ForecastHostGroup')
    processing!ReportServer_0-13!1758!06/26/2012-18:26:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Не удалось выполнить
    запрос для набора данных "DiskSpaceUsageForecasting". ---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Execution of the managed stored procedure GetTimeSeriesForecast failed with the following error: Exception has been thrown by
    the target of an invocation..
    Query (5, 58) Parser: The syntax for '6' is incorrect.
       at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider,
    AdomdPropertyCollection commandProperties, IDataParameterCollection parameters)
       at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
       at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
       at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
       at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunEmbeddedQuery(Boolean& readerExtensionsSupported, Boolean& readerFieldProperties, List`1 queryParams, Object[] paramValues)
       --- End of inner exception stack trace ---;
    The Russian string “Не удалось
    выполнить запрос для набора данных "DiskSpaceUsageForecasting"” is translated to “Could not execute query for data set "DiskSpaceUsageForecasting"”.
    I have clean installation SCOM 2012 RU1, VMM 2012 RU1. Integration SCOM with VMM work fine.
    SQL collation for all SQL DB instances (SCOM and VMM and SCOM reporting) – “SQL_Latin1_General_CP1_CI_AS”
    SQL Analysis service: SQL collation – “Latin1_General” ; language for the server – English (United States)
    I think the problem in regional settings. By my opinion there are two possible mistakes:
    SQL collation  for all SQL DB instances. May be need use “Latin1_General_CI_AS”
    as provided by
    http://blogs.technet.com/b/momteam/archive/2012/05/25/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
    Need change regional setting. Question is for what (OS regional setting, SQL Analysis service settings,…) ?

    Error: Subreport could not be shown
    Opening a report for Client Security might result in the following error being displayed in one or more areas of the report: "Error: Subreport could not be shown."
    Background
    There are two possible reasons for this error:
    1. Wrong location   The reporting server is pointing to the wrong computer running SQL Server or a SQL Server instance.
    2. Insufficient permissions   The account configured (in SQL Server Reporting Services) to connect to the reporting database does not have appropriate permissions for the database.
    Solution
    To determine which reason is causing the error, attempt to directly open the subreport reporting the error, by clicking the name of the subreport.
    If the reporting server is pointing to a wrong location, the report displays an error similar to the following: 
    Error message
    An error has occurred during report processing.
    Cannot create a connection to data source 'SystemCenterReporting'. Cannot open database "SystemCenterReporting" requested by the login. The login failed. Login failed for user username.
    To verify the correct SQL Server computer and instance path
    In Report Manager, navigate to the report generating the error and click the Properties tab.
    Click Data Sources and under a Shared data source, note the path.
    Open the reporting Web site. If you chose the default virtual directory for reports, the URL is: http://hostname/Reports/
    If you chose to secure the viewing of reports with HTTPS, the URL is: https://hostname/Reports/
    Click SCDW.
    In the Connection type list, ensure that Microsoft SQL Server is selected.
    In the Connection string box, ensure that the correct SQL Server computer and instance name are entered.
    Note:
    A period (.) denotes the local computer.
    If the account has insufficient permissions, the report displays an error similar to the following: 
    Error message
    An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'DSDashboardComputersTrend'. (rsErrorExecutingCommand) EXECUTE permission denied on object 'prSAS_UX_DashboardComputersTrend', database 'SystemCenterReporting',
    schema 'dbo'.
    To determine if you are experiencing the SQL Server permissions issue
    Open the reporting Web site. If you chose the default virtual directory for reports, the URL is:http://hostname/Reportserver/
    If you chose to secure the viewing of reports with HTTPS, the URL is:https://hostname/Reportserver/
    Click Microsoft Operations Manager Reporting, click Microsoft Forefront Client Security, and scroll to DashboardComputersTrend.
    Click DashboardComputersTrend.
    If you are experiencing a SQL Server permissions issue, an error similar to the preceding error appears.
    To grant permissions to the SQL Server computer
    1. In Report Manager, click SCDW and note the account in the Connect using section. This is the account under which the database is contacted.
    2. On the server with the System Center Reporting database, start SQL Server Management Studio.
    3. In the tree, expand Security, and then expand Logins. Do one of the following:
    If the user account is listed, right-click the account, click Properties, and then go to step 5.
    If the user account is not listed, right-click Logins and choose New Login.
    4. In the Login name box, enter the user account (domain\username).
    5. In the Login Properties dialog box, click User Mapping, and then under Users mapped to this login, select the System Center Reporting check box.
    6. Under Database role membership for: System Center Reporting, select the db_owner check box, and then click OK.
    Thanks,
    Yog Li
    TechNet Community Support

Maybe you are looking for