Problem in accessing a Lotus Notes installed in French from the portlet
Hi,
We installed the Lotus Notes Portlet on a 9iAS V2 on a solaris Box. The installation of the portlet worked fine and we tried to get the messages from notes.
Accessing a french install of Notes on a Win2K box, we got the following error:
Error: Lotus Notes Portlet encountered Domino error:4045 Invalid date lotus.domino.NotesException at lotus.domino.cso.Session.createDateTime(Session.java:196) at oracle.lotus.application.LotusProvider.showPortlet(LotusProvider.java:817) at oracle.lotus.application.LotusProvider.process(LotusProvider.java:1091) at oracle.lotus.application.InboxShowRenderer.renderBody(InboxShowRenderer.java:84) at oracle.portal.provider.v1.RenderManager.render(RenderManager.java:165) at oracle.portal.provider.v1.http.ServletProviderResponse.showPortlet(ServletProviderResponse.java:528) at oracle.portal.provider.v1.http.HttpProvider.dispatchProviderAction(HttpProvider.java:660) at oracle.portal.provider.v1.http.HttpProvider.service(HttpProvider.java:390) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:500) at org.apache.jserv.JServConnection.run(JServConnection.java:321) at java.lang.Thread.run(Thread.java:484)
We tried to change the NLS_LANG and NLS_DATE_FORMAT in jserv.properties without any success.
After that, we connected the Lotus external application to an American Notes install on Linux and we didn't got the problem.
Where do i have to modify something to be able to use the portlet WITH my French Notes install ?
Thanks
regards
We have the same problem with a spanish Lotus Domino installation.
This is the stack of error shown when display the Domino portlets.
Error: Lotus Notes Portlet encountered Domino error:4045 Invalid date lotus.domino.NotesException at lotus.domino.cso.Session.createDateTime(Session.java:196) at oracle.lotus.application.LotusProvider.showPortlet(LotusProvider.java:817) at oracle.lotus.application.LotusProvider.process(LotusProvider.java:1091) at oracle.lotus.application.CalendarShowRenderer.renderBody(CalendarShowRenderer.java:64) at oracle.portal.provider.v1.RenderManager.render(RenderManager.java:165) at oracle.portal.provider.v1.http.ServletProviderResponse.showPortlet(ServletProviderResponse.java:524) at oracle.portal.provider.v1.http.HttpProvider.dispatchProviderAction(HttpProvider.java:660) at oracle.portal.provider.v1.http.HttpProvider.service(HttpProvider.java:390) at javax.servlet.http.HttpServlet.service(HttpServlet.java:588) at org.apache.jserv.JServConnection.processRequest(JServConnection.java:424) at org.apache.jserv.JServConnection.run(JServConnection.java:216) at java.lang.Thread.run(Thread.java:479)
Similar Messages
-
I can not install app's from the app store on my phone,and when i try, i get a message tells me (cannot connect to itunes store) that happened after i updated it to "IOS6" . it's a "IPhone4 S"
Remember, any purchased item from the itunes store is forever associated with the Apple ID used to buy it. So when you get prompted for an ID/password and it doesn't accept it, then you are using the wrong ID.
Go to Settings>iTunes and App Stores, be sure it's logged into the ID you have set on the iphone (since that one seems to be connecting with the right ID). If you've done this, then you might wait a bit to see if the "cannot connect to .. store" message has to do with internet connections. -
Ipod Touch 2nd gen not installing any apps from the app store
My iPod touch isnt letting me install any new apps or any updates. It is letting me get to the stage where it is on the pages, but thenstopps at the Waiting stage and going no further. Can anybody help me to get rid of this problem?
Go to Settings, General, Reset, Reset Network Settings. You'll have to reenter your network login info, but it should work after that.
-
All of a sudden my iTunes stopped working, and I get the following error messages:
1. the program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem
and
2. iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126).
Now I've checked the forums and followed the advice of uninstalling all Apple applications, rebooting, and reinstalling iTunes.
This is not working. I've tried installing as Administrator but doesn't make any difference at all.
There must be a way to fix this? I'm not a tech geek but I want to avoid having to take my laptop back to factory settings to sort this out.
ThanksClick here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99192) -
Itunes will not install. I get the error message "Error writing to file: C:\Program Files\Common Files\Apple\Mobile Device Support\com.apple.IE.client_main.dll Verify that you have access to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Problems answering surveys with lotus notes
Hello,
We have a problem answering a questionnaire sent from BW to lotus notes. When I open the html questionnaire that is in the message as attachment, answer the question and push the button 'Send questionnaire',lotus notes open a new message with the address of the recipient but doesn't´t create the attachment file postdata.att. We have lotus notes version 6.5.1 and we have internet explore with SP 2.
After a lot of changes on the security options of internet explorer, some parameters in lotus notes, we can´t generate the attachment in the lotus notes message.
Can anybody please help on this. It's a high priority issue........
Thanks
Best regards
Ignacio VeraOver a year later... Did you ever resolve this issue? I'm having the same problem since our upgrade to
Acrobat 9.
Please let me know if you have a solution! -
CVS: access method is not installed
Hello,
i don't get the CVS connection working.
I have installed WinCVS, in the "About Box" of JDeveloper i can read "(CVSNT) 2.0.41a (client/server). CVS from the command line works fine, also WinCVS is happy.
Then i create a CVS connection JDeveloper, and regardless which access method i choose (pserver,ntserver, ...) i get:
Testing connection...
the :ntserver: access method is not installed on this system
Connection test failed: unable to connect.
when i press "test connection".
What to do ?
Regards
RenéWinCVS probably comes bundled with an older version of cvsnt that still supports the ntserver protocol. I think the CVS executable used by WinCVS is in the WinCVS installation directory. If you're getting errors in JDev that you're not getting from that specific cvs.exe, yor PATH probably doesn't have the correct directory first, and hence JDev is picking up a different version of CVS. Try putting the WinCVS directory first thing in your PATH.
Brian -
I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.
Welcome to the Apple Support Communities
One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
First of all, open > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there -
I am not able to install screen-git from the aur
So yeah, i cant install screen-git from the aur. Im using yaourt.
┌─[yamifrankc]──(~)
└─| % > aur -S screen-git
==> Resuming previous build
==> Downloading screen-git PKGBUILD from AUR...
tar: Record size = 13 blocks
==> Last 5 comments ordered by date (asc):
Comment by: dolby on Tue, 16 Jun 2009 15:02:25 +0000
GNU screen shouldnt depend on libelf. Package in extra now doesnt.
See http://bugs.archlinux.org/task/14700
Comment by: dolby on Tue, 16 Jun 2009 15:03:08 +0000
Oh yeah, gpm isnt a dependency either.
Comment by: nihathrael on Tue, 16 Jun 2009 16:23:56 +0000
Thanks for the pointers. Package updated.
Comment by: firecat53 on Tue, 16 Jun 2009 23:19:28 +0000
At least for x86_64, libelf seems to be a dependency. Throws an error about libelf.so.0 when starting screen if it's not installed.
Comment by: Ranguvar on Sun, 11 Oct 2009 04:00:10 +0000
The three lines at the end of the install scriplet are unnecessary now and can cause problems apparently, please remove :)
Also, I cannot confirm libelf dependency, both by using ldd and trying removing libelf, so it should be kept out.
First Submitted: Sun, 09 Nov 2008 15:43:42 +0000
screen-git 20090616-1 : GNU Screen from GIT repository. Provides vertical splitting.
( Unsupported package: Potentally dangerous ! )
==> Edit the PKGBUILD (highly recommended for security reasons) ? [Y/n]("A" to abort)
==> ----------------------------------------------
==>n
==> screen-git dependencies:
- ncurses (already installed)
- shadow (already installed)
- git (already installed)
- automake (already installed)
- autoconf (already installed)
==> WARNING: This PKGBUILD contains install file that can be dangerous.
screen.install
==> Edit screen.install (highly recommended for security reasons) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>y
Please add EDITOR to your environment variables
for example:
==> Edit PKGBUILD with:(replace gvim with your favorite editor)
==> Edit screen.install with:vim
==> WARNING: This PKGBUILD contains install file that can be dangerous.
screen.install
==> Edit screen.install (highly recommended for security reasons) ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==>n
==> Continue the building of screen-git ? [Y/n]
==> ----------------------------------------------
==>y
==> Install or build missing dependencies for screen-git:
==> Building and installing package
mkdir: cannot create directory `/var/abs': Permission denied
==> WARNING: Unable to write in /var/abs/local/yaourtbuild/screen-git directory. Using /tmp directory
==> screen-git dependencies:
- ncurses (already installed)
- shadow (already installed)
- git (already installed)
- automake (already installed)
- autoconf (already installed)
==> Determining latest git revision...
-> Version found: 20091204
==> Making package: screen-git 20091204-1 i686 (Fri Dec 4 07:43:16 CST 2009)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found screen.pam in build dir
==> Validating source files with md5sums...
screen.pam ... Passed
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Entering fakeroot environment...
==> Starting build()...
==> Connecting to GIT server....
Already up-to-date.
==> The local files are updated.
==> GIT checkout done or server timeout
==> Starting make...
autoheader: WARNING: Using auxiliary files such as `acconfig.h', `config.h.bot'
autoheader: WARNING: and `config.h.top', to define templates for `config.h.in'
autoheader: WARNING: is deprecated and discouraged.
autoheader:
autoheader: WARNING: Using the third argument of `AC_DEFINE' and
autoheader: WARNING: `AC_DEFINE_UNQUOTED' allows one to define a template without
autoheader: WARNING: `acconfig.h':
autoheader:
autoheader: WARNING: AC_DEFINE([NEED_FUNC_MAIN], 1,
autoheader: [Define if a function `main' is needed.])
autoheader:
autoheader: WARNING: More sophisticated templates can also be produced, see the
autoheader: WARNING: documentation.
configure: WARNING: unrecognized options: --with-sys-screenrc
this is screen version 4.1.0
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking whether gcc needs -traditional... no
checking for library containing strerror... none required
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking for gawk... gawk
checking for a BSD-compatible install... /bin/install -c
configure: checking for buggy tools...
- sh is 'GNU bash, version 4.0.35(2)-release (i686-pc-linux-gnu)'.
- sed is 'GNU sed version 4.2.1'.
checking if a system-wide socket dir should be used... yes
checking for the socket dir... (eff_uid ? "/tmp/uscreens" : "/tmp/screens")
configure: checking for MIPS...
configure: checking for Ultrix...
configure: checking for butterfly...
configure: checking for POSIX.1...
- you have a POSIX system
configure: checking for System V...
configure: checking for sequent/ptx...
configure: checking SVR4...
checking stropts.h usability... yes
checking stropts.h presence... yes
checking for stropts.h... yes
checking for string.h... (cached) yes
checking for strings.h... (cached) yes
configure: checking for Solaris 2.x...
configure: checking BSD job jontrol...
- you have jobcontrol
configure: checking setresuid...
configure: checking setreuid...
configure: checking seteuid...
configure: checking select...
configure: checking fifos...
- your fifos are usable
configure: checking for broken fifo implementation...
- your implementation is ok
configure: checking sockets...
- your sockets are usable
configure: checking socket implementation...
- you are normal
- both sockets and fifos usable. let's take sockets.
configure: checking select return value...
- select is ok
configure: checking for tgetent...
configure: checking libcurses...
- you use the terminfo database
configure: checking ospeed...
configure: checking for /dev/ptc...
configure: checking for SVR4 ptys...
checking for getpt... yes
configure: checking for ptyranges...
configure: checking default tty permissions/group...
checking for write... /usr/bin/write
checking for xterm... /usr/bin/xterm
- pty mode: 0620, group: 0
configure: checking getutent...
configure: checking ut_host...
checking utempter.h usability... no
checking utempter.h presence... no
checking for utempter.h... no
configure: checking for libutil(s)...
configure: checking getloadavg...
assuming posix signal definition
configure: checking for crypt and sec libraries...
configure: checking crypt...
configure: checking IRIX sun library...
configure: checking syslog...
configure: checking wait union...
configure: checking for termio or termios...
configure: checking getspnam...
configure: checking getttyent...
configure: checking fdwalk...
configure: checking whether memcpy/memmove/bcopy handles overlapping arguments...
checking for long file names... yes
checking for vsprintf... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for setenv... checking for nl_langinfo(CODESET)... yes
checking for library containing gethostname... none required
checking for rename... yes
checking for fchmod... yes
checking for fchown... yes
checking for strerror... yes
checking for lstat... yes
checking for _exit... yes
checking for utimes... yes
checking for vsnprintf... yes
checking for getcwd... yes
checking for setlocale... yes
checking for strftime... yes
checking for PAM support... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating doc/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing default commands
configure: WARNING: unrecognized options: --with-sys-screenrc
Now please check the pathnames in the Makefile and in the user
configuration section in config.h.
Then type 'make' to make screen. Good luck.
CPP="gcc -E -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"'" srcdir=. sh ./osdef.sh
AWK=gawk CC="gcc -march=i686 -mtune=generic -O2 -pipe" srcdir=. sh ./comm.sh
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe screen.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe ansi.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe fileio.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe mark.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe misc.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe resize.c
gcc -c -I. -I. -DETCSCREENRC='"/usr/etc/screenrc"' -DSCREENENCODINGS='"/usr/share/screen/utf8encodings"' -DHAVE_CONFIG_H -DGIT_REV=\""`git describe --always 2>/dev/null`"\" \
-march=i686 -mtune=generic -O2 -pipe socket.c
In file included from socket.c:51:
extern.h:159: error: conflicting types for 'execvpe'
/usr/include/unistd.h:585: note: previous declaration of 'execvpe' was here
make: *** [socket.o] Error 1
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build screen-git package
Vertical split is ftw! What can i do to build it?yeah, i also got that message.
for vertical split you can go for screen-vs package. this is screen with the vs patch.
http://aur.archlinux.org/packages.php?ID=6006 -
11gR2RAC "CRS is not installed on any of the nodes" error message
Hi
I found error message while try to install Oracle Software "CRS is not installed on any of the nodes".
This is my server information.
Server : HP solaris x86-64
Scan : setup complete
Grid install : Silent installation complete but found some warning while run orainstRoot.sh on node1 only
+"Changing permissions of /rtr/app/oraInventory.+
+Adding read,write permissions for group.+
+Removing read,write,execute permissions for world.+
+chmod: WARNING: chmod: could not getcwd+
+OUI-35086:WARNING: chmod of /rtr/app/oraInventory+
+Adding read,write permissions for group.+
+,Removing read,write,execute permissions for world.+
+ failed!+
+Changing groupname of /rtr/app/oraInventory to oinstall.+
+chgrp:+
+OUI-10057:WARNING: chgrp of /rtr/app/oraInventory to oinstall failed!+
+The execution of the script is complete."+
after that, the root.sh is run successfully for both nodes.
Then while install database software I found CRS is not installed on any of the nodes
I tried to check oraInst.loc and found 3 oraInst.loc, all of them can access by oracle user
+#ls -l /rtr/app/oraInventory/oraInst.loc+
-rw-rw---- 1 grid oinstall 60 Mar 4 16:45 /rtr/app/oraInventory/oraInst.loc
+# ls -l /rtr/app/11.2.0/grid/oraInst.loc+
-rw-r----- 1 grid oinstall 60 Mar 4 16:26 /rtr/app/11.2.0/grid/oraInst.loc
+# ls -l /var/opt/oracle/oraInst.loc+
-rw-r--r-- 1 root root 60 Mar 4 16:49 /var/opt/oracle/oraInst.loc
cat /var/opt/oracle/oraInst.loc
inventory_loc=/rtr/app/oraInventory
inst_group=oinstall
oracle@bkkd-sirac03 # cat /rtr/app/oraInventory/oraInst.loc
inventory_loc=/rtr/app/oraInventory
inst_group=oinstall
oracle@bkkd-sirac03 # cat /rtr/app/11.2.0/grid/oraInst.loc
inventory_loc=/rtr/app/oraInventory
inst_group=oinstall
All oracle services are online
HA Resource Target State
ora.LISTENER_SCAN1.lsnr ONLINE ONLINE on bkkd-sirac04
ora.LISTENER_SCAN2.lsnr ONLINE ONLINE on bkkd-sirac03
ora.LISTENER_SCAN3.lsnr ONLINE ONLINE on bkkd-sirac03
ora.asm OFFLINE OFFLINE
ora.bkkd-sirac03.ASM1.asm OFFLINE OFFLINE
ora.bkkd-sirac03.gsd OFFLINE OFFLINE
ora.bkkd-sirac03.ons ONLINE ONLINE on bkkd-sirac03
ora.bkkd-sirac03.vip ONLINE ONLINE on bkkd-sirac03
ora.bkkd-sirac04.ASM2.asm OFFLINE OFFLINE
ora.bkkd-sirac04.gsd OFFLINE OFFLINE
ora.bkkd-sirac04.ons ONLINE ONLINE on bkkd-sirac04
ora.bkkd-sirac04.vip ONLINE ONLINE on bkkd-sirac04
ora.eons ONLINE ONLINE on bkkd-sirac03
ora.gsd OFFLINE OFFLINE
ora.net1.network ONLINE ONLINE on bkkd-sirac03
ora.oc4j OFFLINE OFFLINE
ora.ons ONLINE ONLINE on bkkd-sirac03
ora.scan1.vip ONLINE ONLINE on bkkd-sirac04
ora.scan2.vip ONLINE ONLINE on bkkd-sirac03
ora.scan3.vip ONLINE ONLINE on bkkd-sirac03
crsctl check crs
CRS-4638: Oracle High Availability Services is online
CRS-4537: Cluster Ready Services is online
CRS-4529: Cluster Synchronization Services is online
CRS-4533: Event Manager is online
Kindly help me please.
Edited by: user9258303 on Mar 4, 2010 4:43 AMHi Pavel,
I already run the runcluvfy shell script but found the same error
Checking CRS integrity...
ERROR:
CRS is not installed on any of the nodes
Verification cannot proceed
CRS integrity check failed
Checking node application existence...
ERROR:
CRS is not installed on any of the nodes
Verification cannot proceed
Checking time zone consistency...
ERROR:
CRS home "{0}" is not a valid directory
Anything i can check? I think the error might be from incorrect location of central inventory or grid home or permission but i cannot find the root cause.
Regards,
Ann. -
I am trying to install photoshop elements from the shop bought card. After I put in redemption code the yellow line came up with "redemption is not available at the moment". What do I do? Please help! Many thanks
There's been a few of these today. I think there must be a problem with the redemption server and you probably just need to wait a while and try again.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
i am trying to install msnbc app from the app store and keep getting an error message. The app will not install. What can i do?
This is asked and answered many times each day. The forum search bar is on the right side of this page.
Disable your firewall/security software and try again. -
I have moved from the US to Norway, and want to change my apple ID to the Norwegian appstore. However, I am not allowed ot change from the US store before I use up my balance, which is 0.17 dollar. The problem is that nothing costs 0.17 dollar and I do no longer have an american visa card, only Norwegian. Is there any way I can erase the credit on my account so I can change the appstore country? Or osmething I can use this credit on? Thank you very much
Try contacting the store support staff at: http://www.apple.com/emea/support/itunes/contact.html they are usually pretty good at sorting out these issues.
-
'''I can not eliminate ASK engine from the list. It came back by itself. Please, tel me how I can eliminate this problem.
Another problem, this browser is no longer compatible with some institutions. .'''Step by step, how did you arrive at seeing this agreement?
-
I have a problem with my itunes. I cannot transfer apps from the itunes to my iphone 4s. Any time I try to snyc itunes tells me "The iphone could not be synced because this computer is no longer authorized for purchased items that are on this iphone. To authorize this computer for items purchased from the itunes store, choose, Store > Authorize This Computer. But anytime I authorize it tells me you have authorized including this computer 2 out 5 computers. And if I try again the same story over and over again. But I have many apps on my itunes which I want to transfer. Please someone help me.
Well Authorize the Computer...........
Maybe you are looking for
-
Iphone 3g with 4.2.1 fw is slow. downgrade possible?
Hi my phone is jailbroken on 4.2.1 but is very slow. My wifi isn't working and also my cell reception is allmost nothing. Would a downgrade work for me? My baseband version is 05.15.04
-
Time machine on a network drive
The situation: We have a Mac Pro with a Time Machine volume on an external drive that is attached to a networked Mac. I don't think this is a very common scenario, but it works just fine over a gigabit network. We do not automount any drives on the
-
ADF BC , lock the rows sometimes and do release it
Hi thank you for reading my psot i think ADF BC sometimes lock my Rows in table and does not allow other to change them , sometimes the lock goes too long time without any reason (a record insert lock the rows until i restart the APPS) i should say t
-
I'm trying to connet to my database , but i have this error: can you help me please , i don't know how to resolve this problem com.mysql.jdbc.exceptions.jdbc4.MySQLSyntaxErrorException: Incorrrect database name my code is the following: import java.
-
Way to CAPTURE style and use on existing TEXT?
Lets say you have a document. You decide GREY works better than RED, so you change the first HEADER to GREY, now I want to change 4 more headers. Is there a way, like in photoshop/fireworks/indesign, where you can use something like an eyedropper, se