Problem in actions change before ear retro date 1.4.2011 acc to controlreco

HI Experts,
Got an issue while performing an action "International assignent reentry".
One of my employee has returned from international assignement.While performing an action "International assignent reentry"
i am getting an error "Change before earlist retro date 01.04.2011 according to control record ss".It is showing while updating the payroll area and personnel subarea in 0001 IT.
We are trying to do action with the date 15.07.2011.
In pu03 earliest pers. RA date mentioned as 01.04.2011,earliest MD change,bonus change as 15.07.2011.
In control record ..earliriest retro accounting period as 01 2011 which is April 2011.
Now control record is on Exit mode.
Please advice me to resolve the problem.
Regards,
Sairam.

HI
Thanks for the reply.If we remove the date in earliest per. retro accounting..what are the implications.
in pu03 ..earlist pers. RA date is maintained as 01.04.2011
We are doing an action with efective from 15.07.2011.
Why the system is showing an error ""change before earliest retro date 1.4.2011 acc to control record to PY area ss.""
After deletion of date in the field of Earlist pers. RA date from puo3 ..after doing the action..shall we put the date as 01.04.2011 in the fiels.
Please advice.
Sairam.
Even after deleting the Earl. pers RA date also ..we are getting the same error.
The payroll control record is in exit mode.
Please advice.
Sairam.
Edited by: sathyasairam on Jul 18, 2011 1:54 PM

Similar Messages

Timer problems on Linux changing system time and data

On Linux SO,
both with flash player plugin and standalone flash player, setting system time with command:
date -s 11:11:11
hang timers (flash.utils.Timer) immediately!

I notice that updating system time (both with "date -s hh:mm:ss" and through ntpd) with a new time in the future doesn't hang up flash.utils.Timer component.
Contrary, if I update system time with a past new one, flash.utils.Timer stops work immediately!!!
This is huge problem for those interfaces that need to run for a long time and also need to be time updated (for examplem through ntp daemon).
Can anyone help me?
PS: Windows Flashplayer doesn't have this problem !!

HT1296 I have a problem synching calendar data between my iPhone 3GS iOS 5.1 & Outlook 2007 on MS7. The basic calendar is OK but the birthdays (little box icon) are a day early & cannot be changed to the correct date. How can I fix this?

I have a problem synching calendar data between my iPhone 3GS iOS 5.1 & Outlook 2007 on MS7. The basic calendar data transfer is OK but the birthdays (little box icon) are a day early & cannot be changed to the correct date. The birthday entries in my Outlook contacts have correct dates.How can I fix this?

The following peocess corrects the calendar entry:
edit the contact & change the birthday, save the change; edit the contact & change the birthday to the correct value, save the change again. The calendar entry then displays on the correct date. Alternatively as a temp solution I can just de-select the "birthdays" calendar which stops the icon being displayed.
Thanks for your advice, I think that it's n going to be a slow process to fix all the entries for not much return.

Hello Guys. I had problems in the Computer before and changed my HD. I saved in my all files documents in (Time Capsule). How can I put all my files, pictures documents on my new HD? Please Help. Thank You

Hello Guys.
I had problems in the Computer before and changed my HD. I saved in my all files documents in (Time Capsule). How can I put all my files, pictures documents on my new HD?
Please Help.
Thank You
Julio Skov

Hey
Thank you very much for replay.
Would you explain to me how can I do?
I don't really understand these processes.
Thak you very much
Julio

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Problem in Change Office and communication Data

Hi all,
In ESS, where we have the Employee search, there is Who's Who and Change office and Communication Data.
We have added a new field "Mobile Telephone " in who's who list.But when we want to Change/Modify the Mobile number by goin to Change Office and Communication data , we are not getting that field there. How can we make the changes?
Need help on this ..
Thnks in advance.
NR

Hi,
Did u get a solution for this. I am also having a similar problem.

Changing creation or modification date with Automator

Three computers access iTunes in my apartment. The files are located on a drive connect to an airport extreme base station. Each computer needs to import music and have physical access to it for iPods and playlist creation. Since iTunes does not automatically check for new files I am in the process of building an Automator script to fix the problem.
I have created an Automator action that allows the user to control-click a folder with audio files in it and have Automator manually change the file name, then import the files into iTunes. My hope was that this would change each files modification date so that, at a later time, another Automator action could search the network drive for newly added media via the modification date. My problem is that simply changing the name does not change the modification date. Even creating an archive and unzipping it before importing does not change the date.
What action can I do with Automator that will change the modification date on those files so that I can search for them later? I know I can add the date to the file name but I don't want a user to have to guess which dates files were added (i.e. I'd have to tell Automator "look for this specific date in the file name' which is obviously unhelpful if I don't know the specific date).
Long story short, how can I change either dates with Automator?

Create a column with the following.
TIMESTAMPDIFF( SQL_TSI_day, Opportunity."Created Date" , CURRENT_TIMESTAMP )
add a filter on this column, for example, <=90.
the SQL_TSI_month does not return accurate number of months.
Cheers!
Shilei

Schedule lines are not modified when i change the requested delivery date

Hi
i have a issue when i am created sales order with requested delivery date 10.11.2011
and the same is copied in to item schedule lines as a 10.11.2011
before saving the order i change the requested derlivery date to 11.11.2011
this new requested delivery date is not dopied to schedule lines at item level (still is having 10.11.2011)
can any one tell me this is system standard behaviour or can we correct this
Thanks and Regards
Kishore

Hi DevarapalliKK,
I tried this solution & problem is solved.
--Go to VA01 & enter the material & qty
--Select the line item in VA01 & click on Edit
--Select Fast Change of & click on Delivery date & mention the Delivery date as 11.11.2011. & click on copy.
--Check the request delivery date in header level in sales tab it will change to 11.11.2011 & also check the Schedule lines in Item level the date will be 11.11.2011 & Save it.
Please let me know if your problem is solved
Regards
Pradeep

Mass change of vendor purchasing data: price cat.(LFM1-MEPRF)

Hi all,
I faced a problem of Mass change vendor's price cat.
IN T-code XK99,
I select table LFM1,LFM2 for the initial screen.
Then i input a vendor in the selection criteria screen,
It always say no data selected.
But actually the vendor is existed!!!
There is still nothing to select even I just input the purchasing organ.
Does anyone faced similar issue?

I try MASS and another Vendor 'CA024' that is the same result...
Also, I found that if i input company code '1000'
it will pop up a dialog screen say 1244 rows has been selected. And ask me to decide which action to do:
1. display all records
2. chng. in background
3. cancel
When i click display all records, it back to screen and say no data meet selection criteria again....

How to set SPD workflow to send email one day before the Due Date? ?

I need to add a step in workflow for a item tracking list: send reminder email one day before the due date.
I thought there is an Action in SPD: wait for [Due Date] to equal [Today]minus one day
But there is no way to do that.
I figured may be I need to create a calculated field [cal-date] that set to: =[today] plus one day.
Then in workflow -
wait till [Due Date] is equal to [cal-date], and send an email
What is the formula for the above calculated field [Today] plus one day?

Hi,
You can add an approval action( such as Start Approval Process) -> click "Approval" -> go to “Change the behavior of a single task” . Then you will
see the "When Task expires" stage.
You can have a look at the blog:
https://www.nothingbutsharepoint.com/sites/eusp/Pages/5-Steps-to-Enhance-SharePoint-2010-Approval-Workflow.aspx
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers
if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Eric Tao
TechNet Community Support

Problem in BADI crm_isa_basket_head to pass ct_extension data to ct_text

Hi Experts/Gurus,
I had a problem when i am passing the ct_extension data to ct_text. I need to pass the data of two new fields created in order jsp as extension data. For this i used the BADI method "changehead_before_order" and i had passed this extensoin data from ct_extension to ct_text which can be passed to crm_order_maintain before order. And when i try to get the data using the method gethead_get_data, in this iam calling CRM_ORDER_READ to get the values of IT_TEXT, the b2b webshop is giving an error and asking to logon again.
The below is the code which i have written in both the methods:
METHOD if_ex_crm_isa_basket_head~changehead_before_order.
DATA : ls_orderadm_h TYPE LINE OF      crmt_orderadm_h_comt,
         wa_orderadm_h TYPE LINE OF      crmt_orderadm_h_comt,
         ls_extension   TYPE              crmt_isales_extension,
         wa_extension   TYPE              crmt_isales_extension,
         ls_text        TYPE              crmt_text_comt,
         ls_lines       TYPE              comt_text_lines_t,
         wa_lines       LIKE LINE OF      ls_lines,
         wa_text        LIKE LINE OF      ls_text,
READ TABLE it_extension INTO wa_extension WITH KEY name = 'ZEXTNSM'.
wa_text-ref_guid = wa_extension-ref_guid.
* wa_text-tdobject = 'CRM_ORDERH'.
* wa_text-tdname = wa_extension-ref_guid.
wa_text-tdid     = '0001'.
wa_lines-tdline = wa_extension-value.
APPEND wa_lines TO ls_lines.
wa_text-lines = ls_lines.
INSERT wa_text INTO TABLE ct_text.
CLEAR wa_text.
CLEAR wa_lines.
CLEAR ls_lines.
READ TABLE it_extension INTO wa_extension WITH KEY name = 'ZEXTNSI'.
wa_text-ref_guid = wa_extension-ref_guid.
wa_text-tdid     = '0002'.
wa_lines-tdline = wa_extension-value.
APPEND wa_lines TO ls_lines.
wa_text-lines = ls_lines.
INSERT wa_text INTO TABLE ct_text.
* ct_text = ls_text.
* append ls_text to CT_TEXT.
ENDMETHOD.
to get the data :
METHOD if_ex_crm_isa_basket_head~gethead_get_data.
DATA : ls_extension TYPE crmt_isales_extension,
         ls_text        TYPE              crmt_text_comt,
         wa_text        type      CRMT_TEXT_COM,
         ls_lines       TYPE comt_text_lines_t ,
         wa_lines       type      TLINE,
         ls_basket_head TYPE crmt_isales_baskethead_ui,
         lv_objectid    type CRMT_OBJECT_ID.
lv_objectid = cs_basket_head-OBJECT_ID.
if lv_objectid is not initial.
CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
      it_header_guid = cs_basket_head-guid
    IMPORTING
      et_text        = ls_text.
READ TABLE ls_text INTO wa_text WITH KEY tdid = 'ZSM'.
*Appending the discount value from the database.
ls_extension-ref_guid = cs_basket_head-guid.
ls_extension-name = 'ZEXTNSM'.
    ls_lines[] = wa_text-lines[].
READ TABLE ls_lines INTO wa_lines INDEX 0.
ls_extension-value = wa_lines-TDLINE.
APPEND ls_extension TO ct_extension.
CLEAR ls_extension.
endif.
ENDMETHOD.
When i put the external break point and checked, in the webshop when i click the update button, in the method changehead_before_order, in the ct_extension table i am getting the values and keys which i have set in the java action. But when i click "order" button, i am not getting anything in ct_extension table which i cannot in turn pass this values to ct_text.
Can you please help me in this regard??
Thanks a lot in Advance!
Regards,
Lakshman.

The header guid i am trying to pass to the crm_order_read is a mismatch.

Help reqd on Changing the Valid from "date" for both BOM & Routing

Hi all...
Pls advise me how to do the changing of Valid from "date"....
Is there any process in CC01 or ECM???....
pls reply me in detail step format (step by step analysis)....
I wrongly created in CS01 and CA01 as 05.10.2007 as my valid from date instead of 01.10.2007.....
How to change to my actual one......
I dont know how to change it exactly.....as im beginner in SAP...pls take this into consideration...and post ur replies imm.
Pls reply me in detail....will be rewarded at the end while closing this issue.
thanks & regards
sankar

Dear Sankarbabu,
IF there's no setting for Date Check in OS54 - Engineering Change Management
Control Data,then you can create a change number with past dates,and also to
use the same one for changing BOM.
Tell me one thing you are saying you want to use ECM.Was the earlier one
created without BOM was created without an ECN?
See already if you have created your BOM with an ECN,then remove the date
check setting which I have mentioned in OS54.
Now goto T code CC02 ,enter the Change number and give the valid from date as
01.10.2007.
After that check in CS03 whether this date(01.10.2007)is getting reflected or not.
I'm sure this will solve your problem.
Regards
Mangal

How to change the default "no data found"

Hi,
Is there a way to change the default "no data found" message of the "When No Data Found Message" in the Report Attributes?
I would like to change that message for a French message. I know that I can change it manually in every section, but I would like another default messages appearing when i create a Report Section.
Thanks

Can you point me to a tutorial?Sure, Users Guide > Managing...Globalization (Chapter 15?)
Is this not happening at run-time?Yes. What happens at runtime is the selection of the application to run. If you run a page in the Application Builder (app 4000) and that application had not been translated or your browser language were set to some flavor (flavour) of English, you get 4000. If app 4000 had been translated to French, say, and you request a page in 4000 and have your browser language set to French, then you'll really run the requested page from app 4002 which is a copy of 4000 translated to French long before your request came along.
If you look at our distribution, you'll find 9 (or more) versions of each of the internal applications in the builder directory.
Scott

I'm using iPhoto 11, and instead of seeing my images in the main view, I see only outlines. (Had same problem in iPhoto 10 before upgrade to Lion Help!

I'm using iPhoto 11, and instead of seeing my images in the main view, I see only outlines. (Had same problem in iPhoto 10 before upgrade to Lion Help!
I'm on a Macbook Pro and all of my software is up-to-date.
The photos and events, etc. appear to be present in my photo library, but I cannot see the actual images--only an outlined placeholder.

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. This can take 3 or 4 goes to work.

My iphone was stolen so I decided to delete my device in find my iphone, but the it has not yet been deleted bec the device is not connected to the internet yet. Can I undo my changes before it will be deleted from icloud? Thank you

Hi Suport,
My iphone was stolen yesterday so I decided to delete my device in find my iphone, but the it has not yet been deleted bec the device is not connected to the internet yet. Can I undo my changes before it will be deleted from icloud? I want to undo the changes because I may find my phone when it connects to the internet. Thank you
See image below:
email is [email protected] for questions thank you Apple. I hope you could help me.

Sorry, you can't undo your action remotely.

Problem in actions change before ear retro date 1.4.2011 acc to controlreco

Similar Messages

Maybe you are looking for