Problem in activating 0sd_c03 IC

Hi all
Here i am facing problem in activating BC IC 0sd_c03 .I have installed the IC with data flow before and when i migrate from 3.5 to 7 . here for the datasource 2lis_13_vditm , the transfer rules are migrated successfully but here i am getting problem when i create transformation on update rule . The problem is with the routine net weight kg,gross weight kg and with the volume . here that infoobject has some routine in update rule and when i created the transformation , in that transformation there is no routine for that infoobject and also there is no mapping present for that infoobject . plz help me in solving this.
Thanx

Hi Ravi,
If you any start routine written on your Update rules or transformations, then when you open that one you will have Display start routine.
If you don't have any routines, then you will have create start routine which implies it doesn't contain any start routine.If you want you can create start routine by click on create start routine.
Creating routines is purely based on business requirement.
when we go for creating routines:
1)If you want to populate some new filed in target based on 2 or 3 fields from source.
2)If you want to delete some records based on certain condition
there are few more scenarios
please go through the below article
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/609eea32-455e-2c10-c08a-c23adf8c934e?quicklink=index&overridelayout=true
If it is enough of one to one mapping for you business, then no need to use any routines just do one to one mapping in transformation
Regards,
Venkatesh
Edited by: Venky1903 on Aug 19, 2011 12:30 AM

Similar Messages

Dear , please help me to solve my problem in activating my iPhone Where I lost it since 3 months and when found it cannot activating my ID Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at

Dear , please help me to solve my problem in activating my iPhone
Where I lost it since 3 months and when found it cannot activating my ID
Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at applied.apple.com)
And try to reset my password but cannot please help me where am a poor man and cannot pay another money to solving this problem to any one
My iPhone data
Ime: ****
Model: A1332
FCC ID : BCG-E2380A
IC: 579C-E2380A
MY id at cloud ****
Password ( ****)
My country : Egypt
MY EMAIL : ****
Tell no: ****
<Personal Information Edited By Host>

The following may help:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears - Apple Support
If you didn't receive your Apple ID verification or reset email - Apple Support

Problem while activating message mapping

Hi all,
I am facing a problem while activating message mapping in IR.It says Object being edited by XXXX and cannot be activated.It's giving my user name itself and even it doesn't allow to go to edit mode even.But I am not opening it twice.How to monitor all the XI users logged into the XI system and find the users using IR and ID objects.Please help in this regard.
Thanks.

Hi Jaya
It is .....
http://<host:port>/rep/support/public/LockAdminService
Hope this helps !!!
Regards,
J Augastine

Problem in activation of communication structure.

Hi frnds,
I have a problem in activation of comm. structure.
Am on Version 3.5.
Its a master data mapping using flexible update.
So i have mapped all the relevant object in the same order as that of csv source file.
But for 1 field, I have a requirement wherein I should write a transfer routine.
So for that single field i have written the code and ACTIVATED the structure.(I got the prompt that Infosource activated)
But when I saw the infosource in Infosource tab, its in White colour(rathar then green). I suppose this means that the infosource is still not activated.
Please let me know what is the problem behind. And also I am not able to activate the Infosource.
thanks in advance.
dubbu.
Edited by: Dubbu on Jul 16, 2009 1:45 PM

Can you just lemme know what field is that?
i hope its ot an automatic generated field which are created automatically for the amount or quantity fields.
morever if this is not the case then please try to refresh the tree.. u might see the diffrence.
Thanks,
Purva

Problem with activation

The error code is:E_ADEPT_REQUEST_EXPIRED
WHO CAN HELP ME?

Are you really having this problem with activation, or are you having it after activation when you try to read a book?
If it is for a specific book ...
If it is a loan check it hasn't really expired.
Then verify that ADE and any devices are set to correct time and timezone.
If it is for registration ...
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0
~

PROBLEM IN ACTIVATION OF A CLASS WHICH IS COPIED FROM STD CLASS

Hi All,
I have a problem in activating a class which is copied from the standard class.
std class: CL_GUI_FRONTEND_SERVICES
The class has got some protected methods and attributes.
here i'm getting following error whenever i try to activate the class:
1) access to protected method "CALL METHOD" is not allowed.
2) access to protected attribute "H_CONTROL" is not allowed.
Thanks & Regards,
Deepak

hi,
i am not sure abt d way u hv coded, but there are some basic stuffs wic need to be taken care of:
1: access 2 protected methods are allowed by self class or its inherited classes. it ca't e accessed from outside class. also protected methods can b accessed from FRIEND class. please use inherited class objects to access protected attribute or methods...
2: also i have found that class implementation or declaration or method declaration can't be done inside PERFORM routines... try to avoid using forms.....
more info can be given if i get the exact code..
regards,
ags.

Problem in activation of ODS 0SD_O06 due to Archiving request.

Hi Experts,
I am having a problem in activating ODS 0SD_O06, it is giving below error message
1. 550 of 1.476.126 data records are in a locked area
2. 550 data records locked by archiving request 1.048.978
3. Error when checking data to be activated against archiving objects.
We have archived the ODS content based on Billing Date, Archiving Request 1.048.978 is for the Bill Date 01.01.2004 to 31.12.2004.
I checked in the new data table of ODS with the Bill Date 01.01.2004 to 31.12.2004, I got 550 Records.
It means the records which is already archived for Bill Date 01.01.2004 to 31.12.2004, got changed and again came into the request.
I am not able to find the solution for this, please help me in this, your help will be highly appreciated.
Thanks and Regards,
Ajay Kumar
9350006555

hi,
If the data has been archieved then there is no tool to get the archieve data back in BW. So I suggest to investigate further.
Thanks

I have problems with activation, after delete mi Iphone from Icloud.

I have problems with activation, after delete mi Iphone from Icloud.

Hello Sikiz 21,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Best of luck,
Mario

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *********

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *******
<Edited by Host>

Hello Khayalh,
You should be able to link your phone number by following the steps in the article below. From your iPhone, sign out of FaceTime and iMessage and then sign back in and it should link. Check in the Start Conversation With and I Can Be Reached at section in iMessage and FaceTime respectively.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
-Norm G.

Problem when activating Query from Business Content

Hi Gurus,
I'm currently encountering problems when activating a query (Financial Statement and P&L: Actual/Actual Comparison) in the business content under these 2 cubes (0FIGL_VC1 and 0FIGL_VC2). Since I was told that these cubes are Virtual Cubes I also have already activated Basis Cubes (0FIGL_C01 and 0FIGL_C02) as a prerequisite of the 2 Virtual Cubes. I have also loaded the data for the 2 cubes and have encountered no problem at all.
But while activating the said Query (Financial Statement and P&L: Actual/Actual Comparison). I have encountered a problem during activation and only this error message appears 1. Error when activating element DO9NE34DKNREWIBWNVAW8BS7M (Technical Name of the Query) and 2. BEx transport request '' is not available or not suitable.
What other possible steps am I missing here?Is there anything else I should do or activate before activating the Query. Thank you again for all the help.
- Kit

Hi Kristian,
Do the following ->
Goto transaction RSA1 -> Transport Connection -> Edit -> Transport -> Switch On Standard.
After this try activating your Query again.
Hope this helps!
Regards,
Saurabh

Having problem while activating my product please help

having problem while activating the product

gifted,
Depending on your version, you may try a chat here or here:
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Serial number and activation support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service1.html

Problem on activating Adobe After effects

I'm having problem on activating Adobe After Effects. I've already activate other programs such as Photoshop & Illustrator.
Mac Pro unit was recently upgrade from Maverick to Yosemite & experience incompatibility when running After Effects, i read some of feedback on Adobe Forums that an upgrade must be installed first to resolved the issue.
Installed on my Mac Pro machine was an Adobe Creative Suite 6.
Hope someone can help with my problem. thanks. sorry for my bad grammar.

You need to install the 11.0.4 update for After Effects CS6. updates for Adobe Media Encoder, Premiere Pro, After Effects, Prelude, Audition, and SpeedGrade

Problem while activating Custom Include

Hi,
My requirement is to make a copy of standard include (V50R_ON_OUTPUT) into ZV50R_ON_OUTPUT.
And to add this custom include in another copy of the main program ZRVV50R10C (copied from RVV50R10C).
But am facing problem when activating the custom main program ZRVV50R10C.
Can anyone faced similar issue(as it contains many enhancements, may be the cause)?
Pls help!
Thanks!
Sangar

Hi Thomas,
Thanks for ur response.
I totally understood the upgrade issue, but unfortunately that's my need now.
The issue am facing is when activating it getting error as "Data not defined". like ( t_prof1 = %_p_prof1_%_app_%-text.) of the statndard include.
do i need to add anything in declaration part also?
Thanks!
-sangar

Problem with activating account

Hi Guys, I am newbie in the internet stuff and I dont know if I am writing on correct board on this website. I have got problem with activating my account. I received email but when I click on the link it was not working, is this link is correct? http://forums.creative.com/?7ea92d63b246

Hi,
I am not sure what's that string of numbers and letters at the begining of your message.
What product do you have?
What account are you trying to activate?

Problem in activating DCs in NWDI

Hello
I have a problem while activating the DC's in DTR.
I activated the DC's with forced activation. DC's were activated but for some of the DC's the source code was not migrated from the inactive state to the active state.
In the repository browser view DC's can be seen in both the inactive and active views. But I cant activate them again since the activity for the DC activation is not available in Activation view.
Can anyone suggest me what should I do?
Is there any way I can revert the active DCs back to inactive and then activate again?
Should I delete the DCs and recreate them?
Or is there some other way to solve this problem?
Can anyone please help me out.
Any help is highly appreciated.
Regards
Pankaj

Hi Sridhar
Thanks for the reply. I was able to run the application on my system before activating it. It had build errors while activating.
My prob is that I have done the forceful activation and all the DCs have been moved to the active state. For some of the DCs the source code is missing.
For eg in Web Dynpro DC , Application and Components and Windows were not migrated. How do i move them now to the active state?
Is there any way i can revert the activated DCs?
Regards
Pankaj

Problem in activating 0sd_c03 IC

Similar Messages

Maybe you are looking for