Problem in activating after changing structure of BAPI once released

Hi,
I have created a BAPI which is having 2 import structures. The BAPI was relaesed.
When I changed component type of a field in one of the structure, it is not allowing me to re-activate it.
Can we not make any changes in structure of the BAPI when it is released.
Thanks in advance !
Anubha
Edited by: Anubha Pandey on Aug 14, 2008 6:04 AM

> I have created a BAPI which is having 2 import structures. The BAPI was relaesed.
> When I changed component type of a field in one of the structure, it is not allowing me to re-activate it.
>
> Can we not make any changes in structure of the BAPI when it is released.
you change the release status To Obsolete
and then change the structures and Generate ,Now set the Status To Release

Similar Messages

Problem in activation of communication structure.

Hi frnds,
I have a problem in activation of comm. structure.
Am on Version 3.5.
Its a master data mapping using flexible update.
So i have mapped all the relevant object in the same order as that of csv source file.
But for 1 field, I have a requirement wherein I should write a transfer routine.
So for that single field i have written the code and ACTIVATED the structure.(I got the prompt that Infosource activated)
But when I saw the infosource in Infosource tab, its in White colour(rathar then green). I suppose this means that the infosource is still not activated.
Please let me know what is the problem behind. And also I am not able to activate the Infosource.
thanks in advance.
dubbu.
Edited by: Dubbu on Jul 16, 2009 1:45 PM

Can you just lemme know what field is that?
i hope its ot an automatic generated field which are created automatically for the amount or quantity fields.
morever if this is not the case then please try to refresh the tree.. u might see the diffrence.
Thanks,
Purva

I have problems with activation, after delete mi Iphone from Icloud.

I have problems with activation, after delete mi Iphone from Icloud.

Hello Sikiz 21,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Best of luck,
Mario

Transformationsde-activating after changing write optimized to standard dso

Hi experts,
i changed write optimized dso to standard dso because of some changes, but after changes done i activated the changed transformations standard dso(previously write optimized), but it is not activating , after gone through the issue its happened
because of 0 record mode, i deleted the 0 recordmode rule and activated.
Now the real issue:-
when i transport this changed dso and transformations from dev to acceptance test am facing this issue below are the details.
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC deleted in version M of DDIC
Transformation 0RKZY5AKAWMJ2ZRKJMSZO791UP6X1F2N deleted in version M of DDIC
Activation of Objects with Type Transformation
Checking Objects with Type Transformation
Checking Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC
Rule 10 (target: 0RECORDMODE group: 02 Technical Group ): Constant is initial
Checking Transformation 0RKZY5AKAWMJ2ZRKJMSZO791UP6X1F2N
Rule 10 (target: 0RECORDMODE group: 02 Technical Group ): Constant is initial
Saving Objects with Type Transformation
Internal Activation (Transformation )
Preprocessing / Creation of DDIC Objects for Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC
Preprocessing / Creation of DDIC Objects for Transformation 0RKZY5AKAWMJ2ZRKJMSZO791UP6X1F2N
Please help me in this by rectificying in dev system how could i manage to send this transport to acceptance test.
One more thing even after deletin the 0recordmode in transformation , i can able to see that in techinical group.
cheers
vas
Post Processing/Checking the Activation for Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC
Transformation 0MX1MHVGBT0A0PTA526YRW3O48Q77GOC was activated

Hi
You can change write optimised to satndard DSO.
You are supposed to add 0recordmode field in datsource check below links for clear information:
error while activating transformations
Re: Transformation error.
Ravi

IPhone 4 activating after changing memory

How I can activate iphone 4 after changing memory from 32 gb to 16 gb???

you can use any services and check this imei:
PHONE 4 32GB BLACK
SIM Locked : No
Carrier : US AT&T Puerto Rico and US Virgin Islands Activation Policy

Problems with OEM after changing a database's hostname

I am having a whole pile of trouble after changing the hostname of an Oracle server 10g R1 -- it's actually 10.1.0.3.0 x86_64 on a Red Hat Enterprise Linux 4.0 server.
Specifically, I had a server called "foo" on which I installed 10g R1, with the SID and service ID both "BB8PROD". Then I realized that I had to rename the server to "bar", which I did (via /etc/sysconfig/network and /etc/hosts).
Then, I edited $ORACLE_HOME/network/admin/tnsnames.ora and $ORACLE_HOME/network/admin/listener.ora to reflect the new host names. I restarted the listener and the database, both of which came up fine.
However, when I start OEM via "emctl start dbconsole"), it still gives me the management URL of http://bar.domain.name:5500/em/. Obviously, that's the <i>old</i> hostname and not the new one. If I visit that URL (which I can keep alive via a CNAME in DNS), then I get the following message despite the instance running just fine in the background:
"Database: BB8PROD
The database status is currently unavailable. It is possible that the database is in mount or nomount state. Click 'Startup' to obtain the current status and open the database. If the database cannot be opened, click 'Perform Recovery' to perform an appropriate recovery operation."
It seems that OEM doesn't know where to find the instance since I changed the name in the listener and tnsnames files. I've tried using <tt>emca -r</tt> to OEM start on the correct hostname (i.e., bar) but even when I do that, it still can't connect to the database.
I found this URL about changing port numbers and the associated XML files that OEM calls, but that didn't solve my issue. I've looked online for help, and most of the articles I've found are about 10g R2, where OEM seems easier to reconfigure.
So, when changing the hostname of a database, what am I supposed to do to OEM to have it recognize the changes?
Thanks!
Chris

Hello Dieter,
I do not have a direct answer to your question, however , I am using an ECC6 system and I checked the two tables that you mentioned (SRGBTBREL & SRRELROLES). SRRELROLES has 3.8 million entries and SRGBTBREL has 2700 entries.
I would talk to your authorizations people to see if there is a generation or maintenance step that needs to be performed.
Not a lot of help I know. Good luck
Greg Kern

Activation after changes in structure with errors.

hi all,
I have a Z- Structure which is included in a transparent Z- table.
I made some changes in the data element of one of the structure fields, (Changed from Char to NUMC ), now when i activate the structure it shows an error , saying " Alter table not possible on the table.....".
Any idea how to proceed from here, is there some other way to change and activate all the dependent tables.
All answers will be appreciated.

Hi,
You need to go to the tables which are using this structure and then use Data Base Utility ( T code Se14 ) to adjust and activate the database tables.
Also make sure that the programs which are using dependent tables are also changed accordingly and this activity is done some time when system is not being used much.
Hope this helps!!
Regards,
Lalit

Problem in activating the Changes through NWDI

Hi All,
I have modified the ESS standard webdynpro java application through NWDI and deployed the application and the changes are working fine.
But when I try to checkin and activate the code, I am getting the following error and the activation getting failed.
[ddgen] [Error]   Structure com.sap.xss.hr.per.it.family.model.types.Hcmt_Bsp_Pa_It_R0021 is not generated
     [ddgen] [Error]   BuiltIn Type or Simple Type expected
     [ddgen] [Info]    Catching throwable null
     [ddgen] [Info]    com.sap.dictionary.generation.ant.GenerationAntTaskError
Can anyone who faced the same issue, can help me. what are steps to be followed to remove the build error during activation.
Regards
Ponnusamy

Hi Ponnusamy
Please have a look at below thread where same issue discussed.
Re: CBS build fail: Structure xxxx is not generated
CBS build failure: Structure is not generated
ddgen Structure not generated error
try to search at http://forums.sdn.sap.com/
Hope it will helps
Regards
Arun

[SOLVED] KEYMAP problem at boot after changing Xorg keyboard settings

Hi everyone,
I successfully installed Arch following both the Beginners Guide and the dm-crypt guide to encrypt the entire disk.
Although I set the KEYMAP HOOK in the mkinitcpio.conf and regenerated the image, the correct keymap is not pulled at boot, making me unable to enter the encryption password correctly.
The only way for me to access my system right now is chrooting into it via the installation CD.
I double-checked the content of /etc/vconsole.conf and it is set to the keymayp layout that I want. During boot the messages confirm that the keymap HOOK has been pulled and that the keymap is set, but apparently not to the layout specified in vconsole.conf.
The keymap hook already worked a few days ago and I was able to decrypt the disk and boot into the system. Then I ran into some keymap issues in X. I played around with localectl to adjust the keymap settings for X and that's where I must have messed up because ever since then I got the above issue at boot.
My working theory now is, that the settings I made for X somehow influence the keymap hook, maybe they override whatever is specified in vconsole.conf?
Is that even possible? And if so, which files would I need to check?
And if it's not: what do I do now?
Edit: I was unable to figure this out so I resorted to a new install. Didn't screw up this time and everything works perfectly now. I definetely recommend the use of a keyfile to anyone who uses a different keymap. That way, if your layout ever gets screwed up you can still decrypt your system via the keyfile.
Last edited by nyn (2015-05-31 14:25:29)

sry the delay
the problem appears after a time using the system and I'm testing now!
chris_l
I'm following the link recommendations.
I created a configuration file $XDG_CONFIG_HOME/fontconfig/fonts.conf containing:
<?xml version='1.0'?>
<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
<fontconfig>
<match target="font">
<edit name="antialias" mode="assign">
<bool>true</bool>
</edit>
</match>
<match target="font">
<edit name="hinting" mode="assign">
<bool>true</bool>
</edit>
</match>
<match target="font">
<edit name="hintstyle" mode="assign">
<const>hintslight</const>
</edit>
</match>
<match target="font">
<edit name="autohint" mode="assign">
<bool>true</bool>
</edit>
</match>
<match target="font">
<test name="weight" compare="more">
<const>medium</const>
</test>
<edit name="autohint" mode="assign">
<bool>false</bool>
</edit>
</match>
<match target="font">
<edit mode="assign" name="lcdfilter">
<const>lcddefault</const>
</edit>
</match>
</fontconfig>
and I change the rule overriding:
# mv 50-user.conf 00-user.conf
I'm still testing the system. The problem don't appears again after the configuration... yet!
Tyrian
I have installed the ttf-dejavu and ttf-liberation fonts, but I can't remove it because it's dependece of others softwares!!!
I'm still testing! thanks
Last edited by UnDr3aD (2012-11-20 15:30:57)

Problem exporting metadata after changing capture time

Hello, I've an odd problem with Lightroom (both 1.3 and 1.4).
I've all my digital camera's photos organised with Lightroom. There was no problem until I tried to change some photo's capture time.
In the beginning, the capture time shown by Windows' explorer matched with the one in Lightroom.
But when I changed some photo's capture time, and then saved the new metadata information to the file... the capture time shown by explorer was two hours later than the hour in Lightroom... it's making my crazy.
In addition I detected some things:
- If I told Lightroom to read the file's metadata the issue stayed: the computer showing, for example, 14:00, and Lightroom 12:00.
- If I exported a photo (Lightroom 12:00) the new file also shows 14:00.
First, I thought it could be a problem caused by the timezone (GMT+1) and the Summer's time in Europe (I live in Spain). (It makes 2 hours...).
But the big problem arrived when I discovered that, If I add a tag to the photos, the archive in the computer changes [I've marked that metadata is written automatically]... ¡and shows the correct time! So, it seems that, each time I change a photo's time, I'll need to add and then remove a tag...
Does it have any sense?
I would be very happy if someone could help me. Thank you very much. And sorry for my english.

I'm coming completely crazy...
without changing again the capture time (I won't use that feature again!) now it happens that some of my photos (it seems that they are the last hundreds photos i've taken) show an incorrect time in Lightroom, now one houre more than the real time.
The time in Lightroom is incorrect, but Windows' file shows a correct time. I've done nothing unusual...
What should I do? Stop using Lightroom? I liked it...

Problems with activation after reset iphone!!!

Good afternoon. I dropped my iphone 4 settings of the operating system of IOS 7
and I can not activate it. APPLE ID registered on which he does not fit after a reset. but this device registered in My Support Profile In my apple ID
iphone 4 - Serial number: 7U123C3XDZZ
What am I doing wrong?
Help me please!!!

I am the first owner of the phone. I registered it. to your id

Sim not active after changing to 4G

This new 4G sim is active with a temporary number but I need my old number working. The old sim still works songs been using that. This is taking too long. What should I do EE?

I am having the same issue it should take up to 24 hours. Now 48 hours and still waiting for it to migrate over. Very annoying.

HT201272 Problem redownloading app after changing back to original download country

If I changed my country from the time when I purchased an app (e.g. from USA to Germany), and then changed back to the original country (e.g. from Germany to USA), why can I not redownload an app previously purchased when USA was selected as the country?

You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country...

ODS activation error after the structure change

Hi all,
      I am getting a short dump with " "DBIF_RSQL_INVALID_RSQL" CX_SY_OPEN_SQL_DBC " error when I am trying to activate an ODS after changing its structure. Do I need to change any setting before loading the data in to the ODS after adding few more fields to it. Exact error says
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"ACTIVATE_SIDS" "(FORM)"
Thanks

The above-described symptom is due to a program error during the transfer of error messages. The problem can occur, for example, if a hierarchy is activated during the activation of an ODS object.
If the indicator 'BEx Reporting' is set for the ODS object, entries are created in the SID tables of characteristics involved during the activation of requests for this ODS object. Newly-created SID values must then be inserted into hierarchy tables. This is not possible for reasons of consistency if a hierarchy is activated at this time. The RRHI_CHAVLS_REQUEST_TO_HIERA function module is used for inserting newly-created SID values in hierarchies.
To simplify the search for the cause of the problem, additional error messages are now displayed in the monitor. If the problem is triggered, for example, by the simultaneous activation of a hierarchy, the error message RH 14 is issued. As described in note 717967, this error message contains the name of the affected hierarchy. If the activation of an ODS object is cancelled due to a serious error, this now also causes additional entries in the log of transaction SM21 (Syslog). These entries start with the character string '> RSDRO':.
Solution
BW 3.0B
           Import Support Package 21 for 3.0B (BW3.0B Patch21 or SAPKW30B21) into your BW system. The Support Package is available whennote 0679665 with the short text "SAPBWNews BW3.0B Support Package 21", which describes this Support Package in more detail, is released for customers.
BW 3.10 Content
           Import Support Package 15 for 3.10 (BW3. 10 Patch15 or SAPKW31015) into your BW system. The Support Package is available when note 0601055 with the short text "SAPBWNews BW 3.1 Content Support Package 15" is released for customers.
BW3.50
           Import Support Package 03 for 3.5 (BW3.50 Patch03 or SAPKW35003) into your BW system. The Support Package is available when note 0693363 with the short text "SAPBWNews BW 3.5 Support Package 03", which describes this Support Package in more detail, is released for customers.

After change in customization 'OR' activity not starts in parallel

Hi,
I made a change to a custom process 'AME Request Approval Process' for expenses workflow, the workflow works well but when I see the 'AP Standar Expense Report Process' which I didn't touch,
I can see that the activity "Receive Expenses Submit Event" used to be executed just after the start and now it starts after many other activities have completed, even though this activity doesn't affect the functionality.
I would like to know if I missed something or it is just the expected behaivor.
Thanks in advance,
Aaron

Hi Federico,
In cases where we want SAP to deduct additional tax in a retro situation, we specify the tax authority in the IMG step "Maintain priority of tax wage types". We specify it with Tax Priority value=1 (Take all) for both original period and retro period. Typically I recommend this for local tax authorities where it can be cumbersome for the employees to pay additional taxes at tax time. And usually the situation occurs because HR specified an incorrect IT0207 or IT0208 value, and the problem was caught after several payrolls have processed.
In theory it should work for your situation as well, but beware that any case of retro and under-withholding could trigger the additional state tax withheld. This might be okay - just depends on your normal procedure and desires when it comes to taxing in a retro situation. Also, make sure you're okay with this tax authority being different than others.
Hope this helps.
Jay Crowley

Problem in activating after changing structure of BAPI once released

Similar Messages

Maybe you are looking for