Problem in activating bufferpool after upgrading to 9.5 ( fixpack 1)

After I upgrade the database from version 8 to 9.5 (fixpack 1) I get the error message that the bufferpool cannot be started because there was not enough memory available. The database comes up with smaller size(16K) hidden bufferpool.
However, It works fine when  I set the registry Variable ( DB2_OVERRIDE_BPF) to the size which was defined originally ( i.e 50000 pages). The size of the bufferpool was never changed during the upgrade. I am uisng only one bufferpool ( IBMDEFAUlTBP) for the database.  The database is running on dedicated server running AIX ( 5.3 ML 8).
Is there any way to activate the database and start the bufferpool(IBMDEFAULTBP) with 50000 without using the the registry variable.
Thanks,
Nasir Syed

Hello Nasir,
DB2 V9.5 requires more memory that your previous V8 installation. You most likely need to allocate more memory for the instance. Are you using STMM? Check the db2diag.log to see if there are any Memory allocation failure errors for the timeframe that you are getting the error. I suspect you will see the following in the db2diag.log :
"Insufficient INSTANCE_MEMORY to allocate new memory set."
Check the following SAP Note for the V9.5 parameter recommendations.
1086130: DB6: DB2 V9.5 Standard Parameter Settings
One more thing to consider:
APAR IZ36972 ACTIVATION OF DATABASE WITH 20% OVERFLOW MAY UNNECESSARILY FAIL DUE TO HITTING
INSTANCE_MEMORY LIMIT
Another defect that could be the reason for memory over allocation by DB2 is APAR IZ41879.
http://www-01.ibm.com/support/docview.wss?uid=swg1IZ41879
So, please go to fixpack 4 to eliminate these possible defects.
This APAR is first fixed in fp 4 currently you are on fp 1.
Regards,
Adam Wilson
SAP Development Support

Similar Messages

  • Problem on activating Adobe After effects

    I'm having problem on activating Adobe After Effects. I've already activate other programs such as Photoshop & Illustrator.
    Mac Pro unit was recently upgrade from Maverick to Yosemite & experience incompatibility when running After Effects, i read some of feedback on Adobe Forums that an upgrade must be installed first to resolved the issue.
    Installed on my Mac Pro machine was an Adobe Creative Suite 6.
    Hope someone can help with my problem. thanks. sorry for my bad grammar.

    You need to install the 11.0.4 update for After Effects CS6. updates for Adobe Media Encoder, Premiere Pro, After Effects, Prelude, Audition, and SpeedGrade

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Why I am facing signal problem in my 4s after upgrade to os 5.0.1

    Why I am facing signal problem in my 4s after upgrade to os 5.0.1 and how can I solve it

    Hi, i also got the same problem. pls let me know if there any luck.
    01738855651
    Tusher
    Thanks Man

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

  • Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    Am running Firefox 3.6.10. Am having problems with Firefox crashing after upgrading to Kaspersky Internet Security 2011. Anyone else having same problem. Oh, BTW am still using Windows XP operating system.

    The latest flash player release is 11,0,1,152.
    Can you upgrade to this version and see whether the crash stil exists?
    Go to get.adobe.com/flashplayer to download and install flash player.
    In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
    saranlee wrote:
    My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows  which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

  • I have a mac with os x 10.6.8, should I upgrade it to os x 10.9.is there any problem which can occur after upgrading my os.

    I have a mac with os x 10.6.8, should I upgrade it to os x 10.9.is there any problem which can occur after upgrading my os.

    It is best to wait till there is a 10.9.1 update as new OS X systems always cause problems to some installations. Better not to risk losing data unless you have a bootable clone that enables you to revert to the original (pre upgrade) state. Haste makes waste.
    Check this thread if you wish to see what I am talking about.
    https://discussions.apple.com/community/mac_os/os_x_mavericks

  • TS3276 Has any one had problems finding RSS feeds after upgrading to 10.8?

    Has any one had problems finding RSS feeds after upgrading to 10.8?

    RSS feeds no longer appear in Mail in Mountain Lion (nor in Safari). You'll need a separate RSS application.
    BTW, this forum is for Mac OS X 10.7 Lion. The forum for OS X 10.8 Mountain Lion is this one:
    https://discussions.apple.com/community/mac_os/os_x_mountain_lion
    Regards.

  • Problems with IMAQ Vision after upgrading from Labview 6i to Labview 6.1

    Hi,
    We just upgraded from Labview 6i to 6.1.To do this,we uninstalled the 6i version as was suggested by NI and then installed the 6.1 version.Later when we tried to run the old vi's written using Imaq vision, we ran into different problems.Has anyone experienced any similar problems with IMaq vision after upgrading?If so please help me solve this issue.
    Thanx
    deepak

    What kind of problems?
    I would strongly suggest that you uninstall IMAQ (all elements) and reinstall them. They register with Windows, probably docked to 6i, and also must be recompiled, which I believe is done in installation.
    This is your best bet.
    If you still have problems, contact NI and ni.com/ask and start a support inquiry.

  • Problem with  Firefighter logs after upgrade to 5.3 from 5.2

    Hello Gurus ,
    just for 2 weeks we are running GRC 5.3 , which we updated from the 5.2 version .
    Unfortunately i could not make all the possible tests in one day and after i didnt check the FF reports .
    So after 10 days..after solving some issues from the upgrade i realized that in SPM (Superuser Priviliege Management ) we have a problem as well .
    We cant perform anymore reason / activity reports because the data are empty.By empty i mean all the entries users made dissapeard. I searched the two tables that normally should have the data (/virsa/zffcdhdr and the  STXH ) but with no luck .
    The other problem is..that after the upgrade to 5.3 from 5.2 the grcservice user that is responsible for the job  /VIRSA/ZVFATBAK didnt had enough authorization to complete the job , thing that before worked fine .
    So for 10 days the job didnt run and when i run the log report i see for every FFID the message "BACKGROUND JOB WAS NOT SCHEDULED/LOG & FILE NOT YET GENERATED"
    When i look directly in the tables CDHDR and CDPOS   i can see the data that the log  needs.
    But how can i reconstruct the FF log with this data ? Because when the auditor comes i would like to have the complete logs.
    thank you all for the support
    Cheerz ,
    david

    Hi David,
    Please go through the SAP Note [1143639|https://service.sap.com/sap/support/notes/1143639] (and subsequent Notes). I hope it is of help, at least partially.
    Best regatds,
    Feri
    Edited by: Ferenc Orosz on Apr 2, 2009 2:43 PM

  • Problem in activating 3gs after updating latest version of ios.

    icannot active my iphone after updating the latest version of ios 6.1.3 there is a message saying that could not active iphone
    there is a reason saying the activation server could not be reached.what to do??please anyone help me out from this problem??

    You probably upgraded a phone that was jailbroken prior to installation.

  • Problem in Product Category after upgrade

    Hi Experts,
    The problem occur after upgrade from CRM 6 to CRM 7. When doing the creation of campaign after inputting the Product ID a error message appear 'Invalid Parent Category for Product ____' . Found out that this checking was not available in CRM 6. Now we cant configure the product because this product comes from another system. 
    the checking is under CL_CRM_MKTGS_PROD_ASSIGN method CREATE_ITEM.
    IF <fs_category_guid> IS INITIAL AND
               <fs_category2_guid> IS INITIAL.
              lv_msgv1 = lv_product_id.
              MESSAGE e031(crm_mktgs_products) WITH lv_msgv1 INTO mv_message_text.
              add_message_symsg( iv_log_type = cl_crm_mktgs_constants=>log_type_function ).
              RETURN.
    Appreciate for any input or idea.
    Thanks in advance.
    best regards,
    Etrafanob

    Hi Etrafanob, Experts,
    I was wondering if this issue has been resolved, and if yes - how. Having the same here after an Upgrade from 4.0 to 7.0.
    Thank you very much!
    Best Regards

  • Reception problems with iPhone 3GS after upgrading to iOS 4.2.1

    AFter upgrading to 4.2.1, my 3GS iPhone is experiencing bad signal, bad quality and frequent disconnections.
    This was repeated even after my provider replaced my device to a different 3GS device, running 4.2.1.
    inserting my SIM card to a NOKIA phone, showed strong signal and good reception.
    Did anyone experience reception problems on 3GS running 4.2.1??
    Thanks,

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • Problems syncing with iTunes after upgrading to OS5

    Hello,
    After upgrading my iPod 3G software to OS5, when I plug my iPod into my Mac (OS10.6.8), iTunes (v10.5) will freeze for several minutes before it can be used again. When I sync my iPod, iTunes will sync all my video podcasts to the iPod, even the ones that were already there, each and every time. I've tried resetting my iPod, but that hasn't worked. Wondering if other people have experienced the same problems and if anything has worked?
    Thanks,
    Clare

    Solved it.

  • Problem with some apps after upgrade to 5.1 (can I downgrade it to 5.0 ??)

    Dear all,
    I'm experiencing some problems with apps after upgrading to 5.1, some of them just got stucked or not even start up. Is there a way of fixing this or downgrade to 5.0 ??
    Thanks

    you cannot downgrade, sorry.

Maybe you are looking for