Problem in Activating Contract

Hi all,
I am creating Contract in REFX while creating contract I am activating the contract. It is showing the error "Activation is not possible due to warnings (Partner Assignment)"
Message no. RECN027
Can anybody help me in this?
Thanks in advance.
Shailendra

Hi all
Just had an upgrade and I am experiencing the same problem: Message no. RECN027
Activation is not possible due to warnings (Partner Assignment) when trying to activate the Contract in RECN.
Where in the Business Partner do I change the validation of the partner please
Thanks in advance
Gavin

Similar Messages

Probleme d'activation iphone 5s

Je viens d'accheter un iphone 5s et j'ai un probleme d'activation serveur indisponible et je ne peut pas le restaure car je doit mettre le code pin pour le deverouiller et pouvoir acceder a itun

Hi Egoscape,
The iPhone 5S is a fantastic device! I know how important it is to have a device while travelling. Yes, the device would need to activated in the U.S per its under a 2year contract. What country are you going to be using the device in? How long will you be in this country? Keep me posted.
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

Dear , please help me to solve my problem in activating my iPhone Where I lost it since 3 months and when found it cannot activating my ID Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at

Dear , please help me to solve my problem in activating my iPhone
Where I lost it since 3 months and when found it cannot activating my ID
Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at applied.apple.com)
And try to reset my password but cannot please help me where am a poor man and cannot pay another money to solving this problem to any one
My iPhone data
Ime: ****
Model: A1332
FCC ID : BCG-E2380A
IC: 579C-E2380A
MY id at cloud ****
Password ( ****)
My country : Egypt
MY EMAIL : ****
Tell no: ****
<Personal Information Edited By Host>

The following may help:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears - Apple Support
If you didn't receive your Apple ID verification or reset email - Apple Support

Problem while activating message mapping

Hi all,
I am facing a problem while activating message mapping in IR.It says Object being edited by XXXX and cannot be activated.It's giving my user name itself and even it doesn't allow to go to edit mode even.But I am not opening it twice.How to monitor all the XI users logged into the XI system and find the users using IR and ID objects.Please help in this regard.
Thanks.

Hi Jaya
It is .....
http://<host:port>/rep/support/public/LockAdminService
Hope this helps !!!
Regards,
J Augastine

Problem in the contract - price of service master is notcpying to condition

Dear Experts,
I am facing a problem with the contract. I have created a contract for services. I have entered all the details like, validity period Service master numbers, Qty and price for each service master.
When I am using this contract in the maintenance order the price is not getting copied. I have analyzed the same and found that there is pricing condition created for the service master line item by the system automatically and this helps copying the price from contract to maintenance order.
This is happening to only one particular Pur. Org. For all other Pur. Org its not happening.
Can some one tell me what could be the reason for not creating the pricing condition for the contracts created for only a particular Pur. Org? Is there any configuration setting missing?
Please help me.
Thanks and Regards,
Praveen

Hello experts,
Can some one please through light on this please?
Thanks and Regards,
Praveen

Problem in activation of communication structure.

Hi frnds,
I have a problem in activation of comm. structure.
Am on Version 3.5.
Its a master data mapping using flexible update.
So i have mapped all the relevant object in the same order as that of csv source file.
But for 1 field, I have a requirement wherein I should write a transfer routine.
So for that single field i have written the code and ACTIVATED the structure.(I got the prompt that Infosource activated)
But when I saw the infosource in Infosource tab, its in White colour(rathar then green). I suppose this means that the infosource is still not activated.
Please let me know what is the problem behind. And also I am not able to activate the Infosource.
thanks in advance.
dubbu.
Edited by: Dubbu on Jul 16, 2009 1:45 PM

Can you just lemme know what field is that?
i hope its ot an automatic generated field which are created automatically for the amount or quantity fields.
morever if this is not the case then please try to refresh the tree.. u might see the diffrence.
Thanks,
Purva

Problem in activating 0sd_c03 IC

Hi all
Here i am facing problem in activating BC IC 0sd_c03 .I have installed the IC with data flow before and when i migrate from 3.5 to 7 . here for the datasource 2lis_13_vditm , the transfer rules are migrated successfully but here i am getting problem when i create transformation on update rule . The problem is with the routine net weight kg,gross weight kg and with the volume . here that infoobject has some routine in update rule and when i created the transformation , in that transformation there is no routine for that infoobject and also there is no mapping present for that infoobject . plz help me in solving this.
Thanx

Hi Ravi,
If you any start routine written on your Update rules or transformations, then when you open that one you will have Display start routine.
If you don't have any routines, then you will have create start routine which implies it doesn't contain any start routine.If you want you can create start routine by click on create start routine.
Creating routines is purely based on business requirement.
when we go for creating routines:
1)If you want to populate some new filed in target based on 2 or 3 fields from source.
2)If you want to delete some records based on certain condition
there are few more scenarios
please go through the below article
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/609eea32-455e-2c10-c08a-c23adf8c934e?quicklink=index&overridelayout=true
If it is enough of one to one mapping for you business, then no need to use any routines just do one to one mapping in transformation
Regards,
Venkatesh
Edited by: Venky1903 on Aug 19, 2011 12:30 AM

T-code for ending the active contract in RE-Fx

Hi Experts,
Is there any separate transaction to end a RE contract.
Currently I'm terminating the contract, by manually entering the valid to date in the genral data tab page of the t-code RECN.
Is there any other way available to end an active contract?
Kindly assist.
Thanks & Regards
Shantanu

Shantanu,
Terminating Contracts is a Business scenario and usually a Business process is defined for such scenario. What I mean is if you wish to terminate a Contract you may have to execute series of steps in SAP related to your contract, example terminating Objects, taking care of outstanding payments/receivables etc.
I could not find a Valid to date on Contracts General Tab which you quoted. But if you are talking about Contract end date on Terms tab then that is the expiration date of the term or the Contract. Contract will expire on that date, but you can certainly renew the Contract.
If you wish to terminate a Contract, I would suggest to execute Notice on Contract and populate NOTICE PER date. Depending on your requirement you can choose to give notice on Objects too. This will mark this Contract as Canceled. This is an event and you can use it to control subsequent tasks in your business process. For this process you can set up Notification and reminders too.
There is a Notice Tool which you can use for mass termination too.
Thanks,
Jag

Problem with activation

The error code is:E_ADEPT_REQUEST_EXPIRED
WHO CAN HELP ME?

Are you really having this problem with activation, or are you having it after activation when you try to read a book?
If it is for a specific book ...
If it is a loan check it hasn't really expired.
Then verify that ADE and any devices are set to correct time and timezone.
If it is for registration ...
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0
~

Problem when creating contract with foreign trade / customs

Hi,
I encountered a problem when creating contract / outline agreement.
I used ME31K to create a contract with a vendor outside of our country. I suppose that I should be able to see "Foreign Trade / Customs" in "Header" menu, but this entry is gray, I cannot enter it.
I tried to create a scheduling agreement using ME31L with the same vendor and material, I can see "Foreign Trade / Customs" information. I suppose these two process are similar, aren't they?
Btw., I checked the master data according to this thread:
http://help.sap.com/saphelp_46c/helpdata/en/ed/3b6cc697e711d1b4e20000e82d81b0/content.htm
Can anyone give me some hint?
Thanks!
Charlie

These two processes are different:
The Contract agreement or the Outline Agreement is that create the centrally contract (cross-plant) where it can maintain different pricing conditions for each and every plant. It creates the Release Order with reference to Outline Agreement. No detailed delivery schedule can be made in the Release Order. No Release documentation is created. Only time-dependent conditions can be created, Some Item Category 'M' and 'W' can be used.
Whereas the Scheduling Agreement is the Plant Location what must be entered in the Scheduling Agreement. Its no need to create any other purchasing document except for delivery schedule line via Transaction ME38 or MRP running (with the appropriate setting of Source List). Delivery Schedule line items are created subject to your specific requirement. It can create both Scheduling Agreement with or without release of Documentation (subject to the Document Type LP or LPA) with the selection of either FRC or JIT delivery schedule. Either time-dependent or time-independent conditions can be created subject to the customizing in the Document Type of the Scheduling Agreement. Item Category 'M' and 'W' can not be used.

PROBLEM IN ACTIVATION OF A CLASS WHICH IS COPIED FROM STD CLASS

Hi All,
I have a problem in activating a class which is copied from the standard class.
std class: CL_GUI_FRONTEND_SERVICES
The class has got some protected methods and attributes.
here i'm getting following error whenever i try to activate the class:
1) access to protected method "CALL METHOD" is not allowed.
2) access to protected attribute "H_CONTROL" is not allowed.
Thanks & Regards,
Deepak

hi,
i am not sure abt d way u hv coded, but there are some basic stuffs wic need to be taken care of:
1: access 2 protected methods are allowed by self class or its inherited classes. it ca't e accessed from outside class. also protected methods can b accessed from FRIEND class. please use inherited class objects to access protected attribute or methods...
2: also i have found that class implementation or declaration or method declaration can't be done inside PERFORM routines... try to avoid using forms.....
more info can be given if i get the exact code..
regards,
ags.

Problem in activation of ODS 0SD_O06 due to Archiving request.

Hi Experts,
I am having a problem in activating ODS 0SD_O06, it is giving below error message
1. 550 of 1.476.126 data records are in a locked area
2. 550 data records locked by archiving request 1.048.978
3. Error when checking data to be activated against archiving objects.
We have archived the ODS content based on Billing Date, Archiving Request 1.048.978 is for the Bill Date 01.01.2004 to 31.12.2004.
I checked in the new data table of ODS with the Bill Date 01.01.2004 to 31.12.2004, I got 550 Records.
It means the records which is already archived for Bill Date 01.01.2004 to 31.12.2004, got changed and again came into the request.
I am not able to find the solution for this, please help me in this, your help will be highly appreciated.
Thanks and Regards,
Ajay Kumar
9350006555

hi,
If the data has been archieved then there is no tool to get the archieve data back in BW. So I suggest to investigate further.
Thanks

I have problems with activation, after delete mi Iphone from Icloud.

I have problems with activation, after delete mi Iphone from Icloud.

Hello Sikiz 21,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Best of luck,
Mario

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *********

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *******
<Edited by Host>

Hello Khayalh,
You should be able to link your phone number by following the steps in the article below. From your iPhone, sign out of FaceTime and iMessage and then sign back in and it should link. Check in the Start Conversation With and I Can Be Reached at section in iMessage and FaceTime respectively.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
-Norm G.

Problem when activating Query from Business Content

Hi Gurus,
I'm currently encountering problems when activating a query (Financial Statement and P&L: Actual/Actual Comparison) in the business content under these 2 cubes (0FIGL_VC1 and 0FIGL_VC2). Since I was told that these cubes are Virtual Cubes I also have already activated Basis Cubes (0FIGL_C01 and 0FIGL_C02) as a prerequisite of the 2 Virtual Cubes. I have also loaded the data for the 2 cubes and have encountered no problem at all.
But while activating the said Query (Financial Statement and P&L: Actual/Actual Comparison). I have encountered a problem during activation and only this error message appears 1. Error when activating element DO9NE34DKNREWIBWNVAW8BS7M (Technical Name of the Query) and 2. BEx transport request '' is not available or not suitable.
What other possible steps am I missing here?Is there anything else I should do or activate before activating the Query. Thank you again for all the help.
- Kit

Hi Kristian,
Do the following ->
Goto transaction RSA1 -> Transport Connection -> Edit -> Transport -> Switch On Standard.
After this try activating your Query again.
Hope this helps!
Regards,
Saurabh

Problem in Activating Contract

Similar Messages

Maybe you are looking for