Problem in activating Global status of a switch "INS_FSCD"

In Tcode SFW1 there is a switch named INS_FSCD which
is activated in development client. Now i am checking
it in the PRD client in PRD its global status is switched off.
This problem is coming when we are activating the standard structure
named SI_ISC_CORR which is a part of a VVKKVTRG (transparent table).
How can we switch it on PRD Server?
Thanks in Advance
Regards
Disha Gupta

not answered..

Similar Messages

Switch global status mode

Hi,
How to change switch global status mode for SAP switch.
In my system i have a requirement to use one of the object that is assigned to a switch. Switcn is active but when i tried to activate the object(Table) i'm getting switch is inactive.
Switch is Active but global status is OFF.
Please let me know.
Thanks in advance.

Hy ,
try reading this:
/people/thomas.weiss/blog/2008/02/04/the-three-use-cases-of-the-enhancement-and-switch-framework--part-5-the-basics-about-switching
To Switch on a switch you activate the corresponding Business Function. You cant switch the switches themselves (thats SAP-Logic again ) .
Uli

Problems with activity reports on Enterprise Portal

Hello, we have problems with activity reports on Enterprise Portal. It shows only zeros since certain date.
We have this error in monitoring of Activity Reports - Status of Activity Reporting: "The database contains non-aggregated data that is more than 2 hours old".
And we found this exception in logs: "Exception during a Prepared-statement DB update"
What could be a problem? What should we do?
Thank you.

Configurarion of the Data Collection Service is done well, I think:
Activate portal activity report: true
First day of the week (e.g., Sunday or Monday): Monday
Gather iView statistics:true
Gather page statistics:true
Gather statistics for remote users of local content (global portal): true
Number of days for daily data retention: 90
Number of days for hourly data retention: 30
Number of days for monthly data retention: 730
Number of days for quarterly data retention: 1460
Number of days for weekly data retention: 365
Objects to exclude from reports
Pages for which to gather user data
Save interval (minutes): 60
What should we do then?

Problems witch channels to the FICON SAN switches

We have some problems witch channels to the FICON SAN switches: channel 56 on Mainframe1 to switch 5B5 (FDBELF5C1_VSAN500_DISK) and channel 28 (on Mainframe1) to switch 5B7 (FDBELF5C1_VSAN510_TAPE). Forr Mainframe2 the channels are 35 to 5B5 and 37 to 5B7.
Hereby an example for switch 5B5 and channels 56 (BAD) and 43 (GOOD):
---> command: D M=DEV(5B5)
IEE174I 10.21.40 DISPLAY M 494
DEVICE 05B5 STATUS=ONLINE
CHP 56 43
ENTRY LINK ADDRESS 6543 655B
DEST LINK ADDRESS 75FE 75FE
PATH ONLINE
N YCHP PHYSICALLY ONLINE Y Y
PATH OPERATIONAL Y Y
MANAGED N N
CU NUMBER 05B5 05B5
MAXIMUM MANAGED CHPID(S) ALLOWED: 0
DESTINATION CU LOGICAL ADDRESS = 00
SCP CU ND = 0MDS9K.513.CSC.1F.00059B7ACEC4.00E0
SCP TOKEN NED = 0MDS9K.513.CSC.1F.00059B7ACEC4.0000
SCP DEVICE NED = 0MDS9K.513.CSC.1F.00059B7ACEC4.0000
When one tries to put the path online then the following error messages are seen:
---> command: VARY PATH(5B5,56),ONLINE
IEE386I PATH(05B5,56) NOT BROUGHT ONLINE
IEE763I NAME= IOSCCMSG CODE= 0000000800000032
IOS291I CONFIGURATION DATA COULD NOT BE READ ON PATH(05B5,56) RC=32
DEVICE SUPPORT CODE DETECTED INCORRECT CDR DATA
IEE763I NAME= IECVIOPM CODE= 0000000400000000
IOS554I CONFIGURATION DATA PROCESSING FAILED
IEE764I END OF IEE386I RELATED MESSAGES µ
We don't think that the problem is port related but switch related!
For the moment problems are present on only one of our 4 mainframe SAN directors. Firmware level of the directors was changed 3 weeks ago to NX-OS 4.2(7b).

Problem solved after IODF weekend.
Channels were toggled.
Rgds,
Ivy

Problem when activating Query from Business Content

Hi Gurus,
I'm currently encountering problems when activating a query (Financial Statement and P&L: Actual/Actual Comparison) in the business content under these 2 cubes (0FIGL_VC1 and 0FIGL_VC2). Since I was told that these cubes are Virtual Cubes I also have already activated Basis Cubes (0FIGL_C01 and 0FIGL_C02) as a prerequisite of the 2 Virtual Cubes. I have also loaded the data for the 2 cubes and have encountered no problem at all.
But while activating the said Query (Financial Statement and P&L: Actual/Actual Comparison). I have encountered a problem during activation and only this error message appears 1. Error when activating element DO9NE34DKNREWIBWNVAW8BS7M (Technical Name of the Query) and 2. BEx transport request '' is not available or not suitable.
What other possible steps am I missing here?Is there anything else I should do or activate before activating the Query. Thank you again for all the help.
- Kit

Hi Kristian,
Do the following ->
Goto transaction RSA1 -> Transport Connection -> Edit -> Transport -> Switch On Standard.
After this try activating your Query again.
Hope this helps!
Regards,
Saurabh

Could not turn on auto-commit in an active global transaction

Why and when does toplink throw this exception
09/09/28 17:50:58 Caused by: java.sql.SQLException: could not turn on auto-commit in an active global transaction
09/09/28 17:50:58 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
09/09/28 17:50:58 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
09/09/28 17:50:58 at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:208)
09/09/28 17:50:58 at oracle.jdbc.driver.PhysicalConnection.disallowGlobalTxnMode(PhysicalConnection.java:4045)
09/09/28 17:50:58 at oracle.jdbc.driver.PhysicalConnection.setAutoCommit(PhysicalConnection.java:1343)
09/09/28 17:50:58 at oracle.jdbc.OracleConnectionWrapper.setAutoCommit(OracleConnectionWrapper.java:107)
09/09/28 17:50:58 at oracle.oc4j.sql.spi.ManagedConnectionImpl.setAutoCommit(ManagedConnectionImpl.java:572)
09/09/28 17:50:58 at oracle.oc4j.sql.spi.ManagedConnectionImpl.initForUse(ManagedConnectionImpl.java:167)
09/09/28 17:50:58 at oracle.oc4j.sql.spi.ManagedConnectionImpl.<init>(ManagedConnectionImpl.java:106)
09/09/28 17:50:58 at oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:171)
09/09/28 17:50:58 at com.evermind.server.connector.ApplicationConnectionManager.createManagedConnection(ApplicationConnectionManager.java:1398)
09/09/28 17:50:58 at oracle.j2ee.connector.ConnectionPoolImpl.createManagedConnectionFromFactory(ConnectionPoolImpl.java:327)
09/09/28 17:50:58 at oracle.j2ee.connector.ConnectionPoolImpl.access$800(ConnectionPoolImpl.java:98)
09/09/28 17:50:58 at oracle.j2ee.connector.ConnectionPoolImpl$NonePoolingScheme.getManagedConnection(ConnectionPoolImpl.java:1211)
09/09/28 17:50:58 at oracle.j2ee.connector.ConnectionPoolImpl.getManagedConnection(ConnectionPoolImpl.java:785)
09/09/28 17:50:58 at oracle.oc4j.sql.ConnectionPoolImpl.getManagedConnection(ConnectionPoolImpl.java:45)
09/09/28 17:50:58 at com.evermind.server.connector.ApplicationConnectionManager.getConnectionFromPool(ApplicationConnectionManager.java:1596)
09/09/28 17:50:58 at com.evermind.server.connector.ApplicationConnectionManager.acquireConnectionContext(ApplicationConnectionManager.java:1541)
09/09/28 17:50:58 at com.evermind.server.connector.ApplicationConnectionManager.allocateConnection(ApplicationConnectionManager.java:1486)
09/09/28 17:50:58 at oracle.j2ee.connector.OracleConnectionManager.unprivileged_allocateConnection(OracleConnectionManager.java:238)
09/09/28 17:50:58 at oracle.j2ee.connector.OracleConnectionManager.allocateConnection(OracleConnectionManager.java:192)
09/09/28 17:50:58 at oracle.oc4j.sql.ManagedDataSource.getConnection(ManagedDataSource.java:272)
09/09/28 17:50:58 at oracle.oc4j.sql.ManagedDataSource.getConnection(ManagedDataSource.java:200)
09/09/28 17:50:58 at oracle.oc4j.sql.ManagedDataSource.getConnection(ManagedDataSource.java:142)
09/09/28 17:50:58 at oracle.oc4j.sql.ManagedDataSource.getConnection(ManagedDataSource.java:127)
09/09/28 17:50:58 at oracle.toplink.essentials.jndi.JNDIConnector.connect(JNDIConnector.java:145)
Thanks,
ND

Hello,
As you can tell from the stack trace, TopLink is not throwing the exception, the connection is when TopLink is attempting to get a connection from the datasource. getConnection should not be throwing this exception, so it is likely a datasource configuration issue or a problem in the driver you are using. How is the datasource configured, what is the version of Oc4J and the driver you are using, and can you try using a different driver version?
Best Regards,
Chris

Having problem while activating my product please help

having problem while activating the product

gifted,
Depending on your version, you may try a chat here or here:
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Serial number and activation support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service1.html

Workflow not starting and RFC status is 'User Switch Is Not Possible'

Hi All,
I am using ABAP classes to raise an event that triggers the workflow.
When I am executing the workflow from SWUS or raising event from SWUE or SE24, the workflow is starting fine.
But when I am raising the event from a Webdynpro application, the same event is raised, but the workflow is not getting triggerred.
I could see a record in SWEL, but the workitem is not created.
In SWEL, it is showing the RFC status as 'User Switch Is Not Possible'.
When I go to SM58, I am able to re-execute the failed transaction and this time the workflow is getting triggered.
The same workflow is working fine in D env. but not in T env.
The event linkages are all same and I also used the COMMIT WORK statement after raising the event.
Another problem is the RFC status is sometimes set to SYSFAIL and sometimes as 'System overloaded, repeat immediately by batch' other than 'User Switch Is Not Possible'.
Please help.
Thanks,
Cay.

Hi,
call function module AUTHORITY_CHECK_RFC explicitly before a remote call to be able to treat a possible exception. If the authorization exists, the function module does not return an explicit result but, like all successfully executed function modules, sets sy-subrc to 0. If sy-subrc is not equal to zero then it could be the problem with the user authorization.
I also think it could alos possible because of your Host name check whether any changes are done to host name.
Regards
Pavan

Issue when activing Global Funds Management Function(PSM-FM)

Hi Peers,
I tried to active Global Funds Management Function(PSM-FM) in IMG. A message "Aktivierung des Haushaltsmanagements ist nicht erlaubt" poped up. And I also only have read access to Active/Deactive Funds Management but SU53 shows authorization check is ok.
What should I do for next? Thanks
Regards,
Eunice

Hi,
I am facing the same issue regarding "Read Access Only" to the activation of Funds Management under Actual and Commitment Update/Integration.
I've checked the component activation and found that
1) ES-PS is activated under SPRO
2) IS-PS is checked under BF11, but the checkbox status is greyed, so that it's impossible to change it.
I've tried to delete the IS-PS entry and re-insert it...the action was successful but the issue remained...
Any clues?
Thanks

Use SNMP to monitor the power supply status of stacked switches

Does anybody know how to use SNMP to monitor the status of the internal power supplies of a group of stacked Cisco 3750 switches?
The switch stack has three 3750-48PS-E switches inter-connected by Cisco StackWise cable. IOS ver 12.1(19)EAlc. A single IP address is used to identify the switch stack. Every time I poll the OID chassisPs1Status (1.3.6.1.4.1.9.5.1.2.4.0 in CISCO-STACK-MIB), I only got the status for the Master switch of the switch stack. Is there any way to poll the power supply status of other switches in the switch stack?
Thanks a lot!

Sorry to refresh such an old topic - but I am stuck with exactly this: Monitoring power supplies of a stacked Cisco Catalyst 3750-E.
I'm using the exact same OID's as described, but the problem is, the information shown on the SNMP output is not correct.
This morning, a power supply of the first switch failed and switched to RPS. Here the information I got on SNMP:
snmpwalk -v 2c -c public 192.168.1.50 1.3.6.1.4.1.9.9.13.1
SNMPv2-SMI::enterprises.9.9.13.1.1.0 = INTEGER: 13
SNMPv2-SMI::enterprises.9.9.13.1.3.1.2.1006 = STRING: "SW#1, Sensor#1, GREEN "
SNMPv2-SMI::enterprises.9.9.13.1.3.1.2.2006 = STRING: "SW#2, Sensor#1, GREEN "
SNMPv2-SMI::enterprises.9.9.13.1.3.1.3.1006 = Gauge32: 41
SNMPv2-SMI::enterprises.9.9.13.1.3.1.3.2006 = Gauge32: 40
SNMPv2-SMI::enterprises.9.9.13.1.3.1.4.1006 = INTEGER: 59
SNMPv2-SMI::enterprises.9.9.13.1.3.1.4.2006 = INTEGER: 59
SNMPv2-SMI::enterprises.9.9.13.1.3.1.5.1006 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.13.1.3.1.5.2006 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.13.1.3.1.6.1006 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.3.1.6.2006 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.4.1.2.1060 = STRING: "Switch#1, Fan#1"
SNMPv2-SMI::enterprises.9.9.13.1.4.1.2.2059 = STRING: "Switch#2, Fan#1"
SNMPv2-SMI::enterprises.9.9.13.1.4.1.3.1060 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.4.1.3.2059 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.1059 = STRING: "Sw1, PS1 Normal, RPS NotExist"
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.2060 = STRING: "Sw2, PS1 Normal, RPS NotExist"
SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.1059 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.5.1.3.2060 = INTEGER: 1
SNMPv2-SMI::enterprises.9.9.13.1.5.1.4.1059 = INTEGER: 2
SNMPv2-SMI::enterprises.9.9.13.1.5.1.4.2060 = INTEGER: 2
As you see, both PS1 (for both switches) are appearing normal. It doesn't even recognize RPS:
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.1059 = STRING: "Sw1, PS1 Normal, RPS NotExist"
SNMPv2-SMI::enterprises.9.9.13.1.5.1.2.2060 = STRING: "Sw2, PS1 Normal, RPS NotExist"
The first switch's power supply died and now the cable is disconnected. LED's of the power supply are out. And still: The switch happily announces by SNMP it's power supplies are up.
Is this a known bug? If yes, has it been fixed?
Model WS-C3750E-48TD
Firmware 12.2(37)SE1
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}

How to find objects with active System status-JEST

Hi All,
Is there any way in which I can find Production operations based on their active system status.
The problem I'm facing is SAP stores system status for an order in JEST. And JEST contains many active system status for a PP Operation.
I have to select all Operations which have status of say e.g. REL(released).
If the select statement is as below
select objnr stat
into table t_jest
from jest
where stat = <Internal format of REL>
and inact NE 'X'.
Then this will also give those objects which are having REL plus any other higher status.
Whereas what I want is only those objects which have their current status as REL and not which also as REL.
The other way of doing this is get a all object and statuses and loop through records and filter out unwanted ones. But it will have serious impact on performance.
Does anyone has some other solution to the above problem. Any function module or any other table which stores only the current active status.
Any help would be of great help to me.
Thanks.
Message was edited by: Stephen Peter

Hi Peter
we have to these FMs to get the Status of Prod.Order.I have Developed one Reoprt which will show up order staus / stages
like : col1 is orders which are in Open nothing but REL.So u have to put a Condition where jest-stat ='REL' only.
OPEN-TECO PCNF-TECO
        2          0
        9          5
        0          0
        2          0
        3          0
        4          3
        0          1
        0          0
        1          0
        2          0
       23          9
CRS_SORDER_CREATE_UPLOAD_PROXY
CRS_SORDER_STATUS_UPLOAD_PROXY
MASS_PERFORM_STATUS_CHANGES
STATUS_READ                      Read Object Status (JSTO and JEST)
STATUS_READ_MULTI
* Getting the Order Number and Obj.Number.
   select aufnr erdat werks objnr from aufk
                      into corresponding fields of table otab
                                  where auart in ('PP01','PP02')
                                    and erdat gt s_budat-low
*                                    prabhu on 24.5.5
                                    and werks in s_werks.
* Getting the Obj.Number and Status Number
data : w_stat like jtab-stat.
* loop at otab.
if otab[] is not initial.
select objnr stat from jest
                    into corresponding fields of table jtab
                    for all entries in otab
                          where objnr = otab-objnr
                          and inact eq ''.
endif.
* Getting the Status Text for All The Orders
loop at jtab.
read table ttab with key istat = jtab-stat.
if sy-subrc ne 0.
select single txt04 txt30 from tj02t
                       into (ttab-txt04,ttab-txt30)
                           where istat eq jtab-stat
                             and spras eq 'EN'.
   if sy-subrc eq 0.
    ttab-istat = jtab-stat.
    append ttab.
    clear ttab.
    endif.
   endif.
endloop.
i think u got one Inputs.
Regards
Prabhu
[email protected]

Dear , please help me to solve my problem in activating my iPhone Where I lost it since 3 months and when found it cannot activating my ID Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at

Dear , please help me to solve my problem in activating my iPhone
Where I lost it since 3 months and when found it cannot activating my ID
Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at applied.apple.com)
And try to reset my password but cannot please help me where am a poor man and cannot pay another money to solving this problem to any one
My iPhone data
Ime: ****
Model: A1332
FCC ID : BCG-E2380A
IC: 579C-E2380A
MY id at cloud ****
Password ( ****)
My country : Egypt
MY EMAIL : ****
Tell no: ****
<Personal Information Edited By Host>

The following may help:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears - Apple Support
If you didn't receive your Apple ID verification or reset email - Apple Support

Problem while activating message mapping

Hi all,
I am facing a problem while activating message mapping in IR.It says Object being edited by XXXX and cannot be activated.It's giving my user name itself and even it doesn't allow to go to edit mode even.But I am not opening it twice.How to monitor all the XI users logged into the XI system and find the users using IR and ID objects.Please help in this regard.
Thanks.

Hi Jaya
It is .....
http://<host:port>/rep/support/public/LockAdminService
Hope this helps !!!
Regards,
J Augastine

Problem in activation of communication structure.

Hi frnds,
I have a problem in activation of comm. structure.
Am on Version 3.5.
Its a master data mapping using flexible update.
So i have mapped all the relevant object in the same order as that of csv source file.
But for 1 field, I have a requirement wherein I should write a transfer routine.
So for that single field i have written the code and ACTIVATED the structure.(I got the prompt that Infosource activated)
But when I saw the infosource in Infosource tab, its in White colour(rathar then green). I suppose this means that the infosource is still not activated.
Please let me know what is the problem behind. And also I am not able to activate the Infosource.
thanks in advance.
dubbu.
Edited by: Dubbu on Jul 16, 2009 1:45 PM

Can you just lemme know what field is that?
i hope its ot an automatic generated field which are created automatically for the amount or quantity fields.
morever if this is not the case then please try to refresh the tree.. u might see the diffrence.
Thanks,
Purva

Problem in activating 0sd_c03 IC

Hi all
Here i am facing problem in activating BC IC 0sd_c03 .I have installed the IC with data flow before and when i migrate from 3.5 to 7 . here for the datasource 2lis_13_vditm , the transfer rules are migrated successfully but here i am getting problem when i create transformation on update rule . The problem is with the routine net weight kg,gross weight kg and with the volume . here that infoobject has some routine in update rule and when i created the transformation , in that transformation there is no routine for that infoobject and also there is no mapping present for that infoobject . plz help me in solving this.
Thanx

Hi Ravi,
If you any start routine written on your Update rules or transformations, then when you open that one you will have Display start routine.
If you don't have any routines, then you will have create start routine which implies it doesn't contain any start routine.If you want you can create start routine by click on create start routine.
Creating routines is purely based on business requirement.
when we go for creating routines:
1)If you want to populate some new filed in target based on 2 or 3 fields from source.
2)If you want to delete some records based on certain condition
there are few more scenarios
please go through the below article
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/609eea32-455e-2c10-c08a-c23adf8c934e?quicklink=index&overridelayout=true
If it is enough of one to one mapping for you business, then no need to use any routines just do one to one mapping in transformation
Regards,
Venkatesh
Edited by: Venky1903 on Aug 19, 2011 12:30 AM

Problem in activating Global status of a switch "INS_FSCD"

Similar Messages

Maybe you are looking for