Problem in activating include

Hi experts,
i have made an include in main program. when i go to that include and activate it.it is saying REPORT/PROFRAM statement missing, or program type is I(include).
i have made it as include program.
why is it so. help me out.
thanks
varu.

HI,
Activate Main program ...that would inturn activate the include also .. you will get a warning message when you try to activate only include program because it cannot recognise the main program while activation ..
Regards,
Santosh
Message was edited by:
Santosh Kumar Patha

Similar Messages

Problem in activating include structure for VBAP

hi ,
i have to add 3 fields in an include structure of vbap table.
when i added and activated it ,it is showing 'partly active'.even the vbap table is becoming 'partly active'.
zvxxvbap_include1 is the include strcuture .it is present in vbap table .
plz tell me why it is showing as 'partly active'??
regards
pavan

Hi Friend,
Please do not use long name for include, make it short up to 6 chars. Check all data element had been activated of your Z include.
Then try to activate again, read logs what taht is saying actually.
Try in Extra -> Database Utility -> Adjust database and activate it.
Hope it will help you.
Regards
Krishnendu

Problem while activating Custom Include

Hi,
My requirement is to make a copy of standard include (V50R_ON_OUTPUT) into ZV50R_ON_OUTPUT.
And to add this custom include in another copy of the main program ZRVV50R10C (copied from RVV50R10C).
But am facing problem when activating the custom main program ZRVV50R10C.
Can anyone faced similar issue(as it contains many enhancements, may be the cause)?
Pls help!
Thanks!
Sangar

Hi Thomas,
Thanks for ur response.
I totally understood the upgrade issue, but unfortunately that's my need now.
The issue am facing is when activating it getting error as "Data not defined". like ( t_prof1 = %_p_prof1_%_app_%-text.) of the statndard include.
do i need to add anything in declaration part also?
Thanks!
-sangar

Dear , please help me to solve my problem in activating my iPhone Where I lost it since 3 months and when found it cannot activating my ID Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at

Dear , please help me to solve my problem in activating my iPhone
Where I lost it since 3 months and when found it cannot activating my ID
Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at applied.apple.com)
And try to reset my password but cannot please help me where am a poor man and cannot pay another money to solving this problem to any one
My iPhone data
Ime: ****
Model: A1332
FCC ID : BCG-E2380A
IC: 579C-E2380A
MY id at cloud ****
Password ( ****)
My country : Egypt
MY EMAIL : ****
Tell no: ****
<Personal Information Edited By Host>

The following may help:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears - Apple Support
If you didn't receive your Apple ID verification or reset email - Apple Support

Problem while activating message mapping

Hi all,
I am facing a problem while activating message mapping in IR.It says Object being edited by XXXX and cannot be activated.It's giving my user name itself and even it doesn't allow to go to edit mode even.But I am not opening it twice.How to monitor all the XI users logged into the XI system and find the users using IR and ID objects.Please help in this regard.
Thanks.

Hi Jaya
It is .....
http://<host:port>/rep/support/public/LockAdminService
Hope this helps !!!
Regards,
J Augastine

Problem in activation of communication structure.

Hi frnds,
I have a problem in activation of comm. structure.
Am on Version 3.5.
Its a master data mapping using flexible update.
So i have mapped all the relevant object in the same order as that of csv source file.
But for 1 field, I have a requirement wherein I should write a transfer routine.
So for that single field i have written the code and ACTIVATED the structure.(I got the prompt that Infosource activated)
But when I saw the infosource in Infosource tab, its in White colour(rathar then green). I suppose this means that the infosource is still not activated.
Please let me know what is the problem behind. And also I am not able to activate the Infosource.
thanks in advance.
dubbu.
Edited by: Dubbu on Jul 16, 2009 1:45 PM

Can you just lemme know what field is that?
i hope its ot an automatic generated field which are created automatically for the amount or quantity fields.
morever if this is not the case then please try to refresh the tree.. u might see the diffrence.
Thanks,
Purva

Problem in activating 0sd_c03 IC

Hi all
Here i am facing problem in activating BC IC 0sd_c03 .I have installed the IC with data flow before and when i migrate from 3.5 to 7 . here for the datasource 2lis_13_vditm , the transfer rules are migrated successfully but here i am getting problem when i create transformation on update rule . The problem is with the routine net weight kg,gross weight kg and with the volume . here that infoobject has some routine in update rule and when i created the transformation , in that transformation there is no routine for that infoobject and also there is no mapping present for that infoobject . plz help me in solving this.
Thanx

Hi Ravi,
If you any start routine written on your Update rules or transformations, then when you open that one you will have Display start routine.
If you don't have any routines, then you will have create start routine which implies it doesn't contain any start routine.If you want you can create start routine by click on create start routine.
Creating routines is purely based on business requirement.
when we go for creating routines:
1)If you want to populate some new filed in target based on 2 or 3 fields from source.
2)If you want to delete some records based on certain condition
there are few more scenarios
please go through the below article
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/609eea32-455e-2c10-c08a-c23adf8c934e?quicklink=index&overridelayout=true
If it is enough of one to one mapping for you business, then no need to use any routines just do one to one mapping in transformation
Regards,
Venkatesh
Edited by: Venky1903 on Aug 19, 2011 12:30 AM

Problem with activation

The error code is:E_ADEPT_REQUEST_EXPIRED
WHO CAN HELP ME?

Are you really having this problem with activation, or are you having it after activation when you try to read a book?
If it is for a specific book ...
If it is a loan check it hasn't really expired.
Then verify that ADE and any devices are set to correct time and timezone.
If it is for registration ...
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0
~

Problem using jsp:include from inside a custom tag

Hi, All !
          I have a problem using <jsp:include> from inside a custom tag. Exception is:
          "java.lang.ClassCastException: weblogic.servlet.jsp.BodyContentImpl"
          Apparently, weblogic tries to cast BodyContentImpl to JspWriterImpl and
          could not do this. Is it a bug, since in the 1.1 spec is said: "The
          BodyContent is a subclass of JspWriter that can be used to process body
          evaluations so they can retrieved later on."
          My code is:
          <wfmklist:items>
          <jsp:include page="item.jsp" flush="true"/>
          </wfmklist:items>


This is an area of contention with WL. It is not so tolerant with regards to
          the spec. I spent several days recently trying to convince it to accept the
          specification in regards to bodies and includes and it appears to have
          successfully rebuffed my efforts.
          Frankly, this is very disappointing. It appears that some shortcuts were
          taken on the way to JSP 1.1 support, and the result is a very hard-coded,
          inflexible implementation. As I have not seen the implementation myself, I
          hate to assume this, however one could posit that the term "interface" was a
          foreign concept during the implementation, other than as some annoying
          intermediary reference requiring an immediate cast to a specific Weblogic
          class, which in turn is apparently required to be final or have many final
          methods, as if being optimized for a JDK 1.02 JIT.
          I am sorry that I don't have any positive suggestions other than to use a
          URL object to come back in an execute the necessary "include" directly. You
          lose all context (other than session) and that can cause its own problems.
          However, you can generally get the URL approach to work, and you will
          hopefully avoid further frustration.
          Peace,
          Cameron Purdy
          Tangosol, Inc.
          http://www.tangosol.com
          Tangosol: How Weblogic applications are customized
          "Denis" <[email protected]> wrote in message
          news:[email protected]...
          > Hi, All !
          > I have a problem using <jsp:include> from inside a custom tag. Exception
          is:
          > "java.lang.ClassCastException: weblogic.servlet.jsp.BodyContentImpl"
          >
          > Apparently, weblogic tries to cast BodyContentImpl to JspWriterImpl and
          > could not do this. Is it a bug, since in the 1.1 spec is said: "The
          > BodyContent is a subclass of JspWriter that can be used to process body
          > evaluations so they can retrieved later on."
          >
          > My code is:
          > ...
          > <wfmklist:items>
          > <jsp:include page="item.jsp" flush="true"/>
          > </wfmklist:items>
          > ...

PROBLEM IN ACTIVATION OF A CLASS WHICH IS COPIED FROM STD CLASS

Hi All,
I have a problem in activating a class which is copied from the standard class.
std class: CL_GUI_FRONTEND_SERVICES
The class has got some protected methods and attributes.
here i'm getting following error whenever i try to activate the class:
1) access to protected method "CALL METHOD" is not allowed.
2) access to protected attribute "H_CONTROL" is not allowed.
Thanks & Regards,
Deepak

hi,
i am not sure abt d way u hv coded, but there are some basic stuffs wic need to be taken care of:
1: access 2 protected methods are allowed by self class or its inherited classes. it ca't e accessed from outside class. also protected methods can b accessed from FRIEND class. please use inherited class objects to access protected attribute or methods...
2: also i have found that class implementation or declaration or method declaration can't be done inside PERFORM routines... try to avoid using forms.....
more info can be given if i get the exact code..
regards,
ags.

Problem in activation of ODS 0SD_O06 due to Archiving request.

Hi Experts,
I am having a problem in activating ODS 0SD_O06, it is giving below error message
1. 550 of 1.476.126 data records are in a locked area
2. 550 data records locked by archiving request 1.048.978
3. Error when checking data to be activated against archiving objects.
We have archived the ODS content based on Billing Date, Archiving Request 1.048.978 is for the Bill Date 01.01.2004 to 31.12.2004.
I checked in the new data table of ODS with the Bill Date 01.01.2004 to 31.12.2004, I got 550 Records.
It means the records which is already archived for Bill Date 01.01.2004 to 31.12.2004, got changed and again came into the request.
I am not able to find the solution for this, please help me in this, your help will be highly appreciated.
Thanks and Regards,
Ajay Kumar
9350006555

hi,
If the data has been archieved then there is no tool to get the archieve data back in BW. So I suggest to investigate further.
Thanks

I have problems with activation, after delete mi Iphone from Icloud.

I have problems with activation, after delete mi Iphone from Icloud.

Hello Sikiz 21,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Best of luck,
Mario

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *********

Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number: *******
<Edited by Host>

Hello Khayalh,
You should be able to link your phone number by following the steps in the article below. From your iPhone, sign out of FaceTime and iMessage and then sign back in and it should link. Check in the Start Conversation With and I Can Be Reached at section in iMessage and FaceTime respectively.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Regards,
-Norm G.

Problem when activating Query from Business Content

Hi Gurus,
I'm currently encountering problems when activating a query (Financial Statement and P&L: Actual/Actual Comparison) in the business content under these 2 cubes (0FIGL_VC1 and 0FIGL_VC2). Since I was told that these cubes are Virtual Cubes I also have already activated Basis Cubes (0FIGL_C01 and 0FIGL_C02) as a prerequisite of the 2 Virtual Cubes. I have also loaded the data for the 2 cubes and have encountered no problem at all.
But while activating the said Query (Financial Statement and P&L: Actual/Actual Comparison). I have encountered a problem during activation and only this error message appears 1. Error when activating element DO9NE34DKNREWIBWNVAW8BS7M (Technical Name of the Query) and 2. BEx transport request '' is not available or not suitable.
What other possible steps am I missing here?Is there anything else I should do or activate before activating the Query. Thank you again for all the help.
- Kit

Hi Kristian,
Do the following ->
Goto transaction RSA1 -> Transport Connection -> Edit -> Transport -> Switch On Standard.
After this try activating your Query again.
Hope this helps!
Regards,
Saurabh

Why do we need to point at main program when activating include?

Hi There Abapers,
Just a quick question, because I faced such issue when implementing OSS notes.
When activating objects I am asked to point out the main program for one of includes changed.
This inclde is used in ~30 programs.
As far as OSS note doesn't say a word about main program in fact I am not able to check it, I need to pick random program from a list up.
The question is...
Why do we need to point at main program when activating include as we are only changing the sub-object (include)?
Will this 'random main program selection' bring some negative effects in the future?
Will be thankful for some expert opinion
Kind Regards,
P.

You should check all main programs when activating an include, to make sure that all main programs are still syntactically correct even with the changed include.
Thomas

Problem in activating include

Similar Messages

Maybe you are looking for