Problem in Activating Master Data 0mat_plant!!

hi David,
You mentioned that you faced the same problemm
I am having the same problem activating the 0mat_plant...
It is says that the object status is inactive & try to activate it...
Can you tell me what u did???
The steps I did was....
Hi All,
I am adding a navigational attribute to 0mat_plant...
& after that when I am activating 0mat_plant, it throws an error as follows:
Diagnosis:Errors arose when activating InfoObject 0MAT_PLANT. An active version already existed before the activation.
System Response:InfoObject 0MAT_PLANT could not be reset to the old active version. Since the generated objects no longer correspond to the old active version, they were reset to inactive.
Procedure:The old active version of InfoObject 0MAT_PLANT can no longer be used. Remove the cause of the activation error and activate InfoObject 0MAT_PLANT anew.
Pls help me with this issue ASAP...
Thanks
BI Learner

not answered..

Similar Messages

How to find active master data source in the bw system

Hi
Can anyone guide me how to find the active master data source in the bw system

Hi,
You can use the table ROOSOURCE. The field ROOSTYPE specifies the type of datasource whether Transaction or attributes or text. You could write an abap program to filter the table and give you only master data datasources.
Assign points if helpful
Regards.

Difference between Activating Master Data and Attribute Change Run

Hi
Is there any difference between Atribute change run and Activating Master data functionaaly???
if wha it is???
can any one explain clearly?
Thanks
Chinna

When u load master data and its attribute to ur data target and if u change any data or attributes of ur master data,in order to update new data to ur data target attribute change run is performed.
When u create a characteristic and if u keep it as master data and activated..it is master data activation
Activating Master Data
When you update master data from an SAP system the master data is imported in an inactive state. You must activate the new master data so that it can be accessed and used for reporting purposes.
For more information, see Versioning Master Data.
Choose the path InfoObject Tree Context Menu of Corresponding Characteristic Activate Master Data.
Upon Activation there are two scenarios to choose from:
The Corresponding Master Data Is Already Being Used in Aggregates in the InfoCube:
If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case, proceed as follows:
1. In the main menu, choose the path Tools Hierarchy/Attribute Change.
2. Proceed as described in System Response upon Changes to Data: Aggregate.
The system now automatically restructures and activates the master data and its aggregates.
Please note that this process can take several hours if the volume of data is relatively high. Therefore, you should simultaneously activate all of the characteristics that are affected by changes to their master data, at regular intervals.
The Corresponding Master Data Is Not Used in Aggregates:
Choose the path InfoObject Tree ® Context Menu of Corresponding Characteristic Activate.
The system now automatically activates the master data so that it can be used directly in reporting.
If there is any change r newly added records in master data..then that particular data will not b avialable for the reporting unless u do activate master data...
if u r using aggregates and then there is any change in master data ...then that particular master data change wil not b available for the reporting unless u do arrtibute change run for that info object.(T-code RSATTR)
Master data attributes and hierachies are used in cube aggregates also. So to do update the latest master data attributes values in the aggregtes attribute change run need to be performed.So Attribute change run also updates the master data attributes in aggregates which is not apart of master data activation.
Text loads do not need attribute change run. Attributes, hierarchies and aggregates need attribute/hierarchy change runs. If you do not have aggregates, just activating the master data is same as attribute change run.

Activating Master data time out problem

Dear all,
when i try to activate master data, it gives error message "time out" . in which tcode i can increase tha time out duration?
Thanks

Hi John,
Please check the thread below:
Activate time-dep. master data (0EMPLOYEE)
This also suggests to run the master data activation program in background, This will solve your issue,
-Vikram

Problem in Read Master Data rule type in Transformation

Hi,
I have 'Tax Classification' & 'Sales Territory' as attributes for 0customer (Master data). I loaded master data for 0customer & data have come up for this 2 fields. I want this 2 fields in my DSO with data filled. As this 2 fields are not in Transaction datasource of my DSO, i added this 2 fields in the Target side in Transformation of the DSO. In Transformation, I gave the rule type as 'Read Master Data' from attribute of '0customer' & mapped KUNAG (Sold-to) to this 2 fields. Activated the Transformation & executed the DTP.
When i check the data, i could see that the Infoobject 'Sales Territory' column alone is filled but 'Tax Classification' column is blank. Tax classification has data in 0customer master data for the displayed customer values but still data is not coming in DSO.
How does this happen when both the fields have same mapping & rule type and still data not getting populated for one field alone. Am i missing anything?
Regards,
Murali

hi,
the green request in MD does not means that the data in MD is activated, you need to activate it after loading everytime so that it reflects in where used list as well.
regards,
Arvind.

Error While activating master data

Dear All,
I am getting an error while updating the master data.
Attributefrom characteristic A0SUBBRD not (actively) available
Attribute A4INNOCAT from characteristic A0BRD not (actively) available
Attribute A0BRD from characteristic A1MATR3 not (actively) available
Help me about to solve this issue
Thank you

Hi,
You are getting this error bcoz the mentioned info objects in the log are not active in the BW system.
make sure the characteristics are active and available in BW system before updating master data.
In which system are you facing this issue 9 DEV or QA or PROD)?
Have you collected all the objects while transporting? Try to retransport the objects it will work fine.
Regards
KP

BI7.0 Hexdecimal values problem while activating the data in DSO

Hi Friends,
                 I've got the data upto PSA and i've run DTP also from PSA to DSO, but while activating the data in DSO from New Data Table to Active Data Table, it's giving the error given below:
Error when assigning SID: Action VAL_SID_CONVERT table
0DOC_HD_TXT
Value '1st disb' (hex. '00310073007400200064006900730062') of          characteristic 0DOC_HD_TXT contains invalid characters
Process 000037 returned with errors.
            it isn't accepting the values like with numberels and chars together
ex: 1st disb, 70 cr Gen Hsg.
               I want the same to be in the report, how these are to be allowed?, i don't want to edit in PSA and there are a lot of values like that i can't edit all those, since there are thousands of records.
Regards,
BalajiReddy

Hi Anil,
                   Thanx for your quick replay, i've allowed ',' in RSKC and i've checked the check box LOWER CASE LETTERS for IO 0DOC_HD_TXT, the problem was almost solved out. What does ',' mean by?
                      Why lower case letter has to be checked only for this IO (0DOC_HD_TXT), not for others? if it is checked, it allows only lower cases, doesn't allow upper cases i think. won't there be any problem? if it is done like that?
        pls tell me the reason, i'm really thankfull for your quick replay
Regards,
BalajiReddy

Problem in Customer Master data

Hio friend
I need some examples what type of problems or issues or ticket comes at clients in Customer Master data maintenance. If possible send some scnerios with solution also how it was solved.
Thanks
Raj

Hi,
1. 'Entry GVK 0000140000 does not exist in SKB1 - check your entry'.
Solution :Reconcilation account 140000 has to be created in GL Master Data - T.code FS00.
2. Customer is Vendor and Vendor is customer.How do you see the net profit?
Solution : In customer Master , you have to input vendor master and in vendor master, you have input customer master, tick the clearing with customer box on the vendor record and the netting with vendor box on the customer record, Payment can be made by Automatic Payment PRogram.
Additionally search SDN with the search word customer master, you will find losts of real time problems with solutions.
Please let me know if you need more information.
Regards
Sridhar M

Problem updating infoobject master data from a dso.

Hi all,
i'm updating the master data of an infoobject from another ods, the two table have the same key.
When i update the infoobject with full repair i get errors about duplicate records and the data load stops, when i delete the request and launch the infopackage again all goes well but it seems it doesn't insert any new record in the master data, what could be the problem?
If you need more info ask me.
Thanks a lot.
Stefano

Hi Sadeesh,
i checked the master data table and it seems it has been updated, i check some order number with recordmode N added today in the dso and the entries were in the infoobject, though i don't know why in the request tab it shows 0 added records.
To be completely sure tomorrow i will check again the number of entries in the 'p' table of the infoobject.
Anyway this is the exact error message i get:
7 duplicate record found. 6478 recordings usedin table /BIC/XZDOCDSO
7 duplicate record found. 6478 recordings usedin table /BIC/PZDOCDSO
After that i run the change run for the IO and when i launch again tha data load it goes well.
Regards
Stefano

Problems with uploading master data in BI 2004S

Hi all,
I wanna upload master data in FI from R/3 System to BI System. I created its transformation. Then, I migrated it WITH EXPORT option. After that, I created Data Transfer Process (DTP), I didn't change any thing, just "Save and Active". Then I created InfoPackage for it => choose Schedule tab and press Start. Open DTP and choose Execute tab -> press Execute.
1. In the case of successful process (the log showed no errors), How can we check that data is transferred successfully?
2. Case 2: I did all above steps for a data source. But when I opened InfoPackage -> it said "This InfoPackage has been already in Process Chain"... I still continued to execute its DTP but I failed. The log said that the data was duplicated.
What does it mean? And what should I do in this case?
3. Case 3: I have a data souce Account Type with <0ACCT_TYPE_TEXT> (icon dialog). I migrated it but failed. Then, after I refreshed, this datasource moved to the group that had been migrated before (in the end of the tree) but <0ACC_TYPE_TEXT> disappeared.
So, I cannot create DTP or InfoPackage for it to transfer. In this case, Do I have to re-create a DataSource? What should I do?
Thanks in advance.

case 1:
Check there might be duplicate record. as it is a text datasource language may be maintained. U can check in monitor what record is showing error.
case 2:
If u migrate the data source then it is a BI7.0 version.
If u want to recover 3.x datasource then u need to use RSDS .
Then again u can create Data Transaformation and DTP and migrate once again.
then load the data.
Normally if u r working on BI7.0 do all the stuffs(DT, DTP) using 3.X version then do the migration of datasource else if u migrate first and do the transformation then u will have to manual mapping and u may missed and do a lot of mistakes.
Thanks,
Debasish

Problem with the master data loads

Hi Guys,
I am trying to load 0MATERIAL_ATTR in QA,but it is throwing error(Record 2 :0MATERIAL : Data record 2 ('000000000000000012 '): Version '000000000000000012 ' is not va ) and also similar error is coming when i load for 0VERSION(Record 1 :0VERSION : Data record 1 ('000E '): Version '000 ' is not valid ).
but for the same master data object in development with the same R/3 data the loads are successful,only in QA it is giving the problem.

Hi Abdul,
Check if the data you are getting for the two fields in your data loading are correct. I think it has some illegal characters(I guess it has a trailing space). If possible try and correct it in the source system itself.
If you are doing full load for the master data, everytime the system is going to pull these values in and throw error. One other way of avoiding it will be to maintain routines to eliminate these.
The quickfix will be to correct it at the PSA level and load it again.
Regards.

Problem in loading Master data

Hi,
I have a master data called 0VENDOR. It has both attribute and text. it has several attributes and only 0VENDOR and its description are filled with data and rest not. Now i am trying to load data but records are transferring but not getting added i.e 0 no of records are added.
i tried deleting master data but it is not happening and i deleted all transaction data related to master data but stillnot able to delete...is there any solution for this?
Regards,
Vijaya

Hi Vijaya,
Were you able to delet data ... how are you sure that the data has been deleted?
1. Right click 0VENDOR and select maintain master data.
2. With out any restriction check out what data is in the Info Object
If you still find data go to SE14 and repeat the process for all the master data tables (/BI0/pvendor, /BI0/svendor, /BI0/qvendor, ....)
1. Enter the table name and press edit
2. Selet the option . Delete Data
3. Press the button Delete and Activate
***Repeat the process for all the tables
Now goto the info Package and execute it ... hopefully your problem will be resolved. Let us know if it did not work.
Best regards,
Kazmi

Facing problem with standard master data source *0bp_def_address_attr *

Hi All,
I am using BW 3.5 version
I am loading master data form 0bp_def_address_attr(stabdard data source) as part of my daily activities.
this loading is failing frequently throwing following error message
30 duplicate record found. 1243 recordings used in table /BI0/PBPARTNER
ID : RSDMD
message number 199
Is there any way I can avoid this failure?How can I handle duplicate records?
Please help me!!
Warm regards
Nanduri Aditya

Thanks for your answers and sorry for my late reply
Hi Srinivas,
I am using 3.5 there is no ' handle duplicate records' option in info pacakge.
Hi Francisco,
Thanks for your answers,
2 OSS notes are relevant to my problem. Currently I am checking in Dev whether it will fix my problem or not.
Thanks a lot it was avery helpful answer.
Warm Regrads,
Nanduri Aditya

Problem while attaching master data source to generic datasource

Hi All,
I have created a generic datasource using three tables in crm systems. the tables are CMSD_CB, CMAD_LO_PRICE AND CMSD_LO_QUANT.
i have loaded data to bw system and want to attach 0ORGUNIT master datasource to the generic datasource. so that i can get 0ORGUNIT hierarchy and sales grp/office details.
could some one help how to solve this problem.
Thanks in advance.
Thanks,
Mahantesh

You don't have to attach the master data datasource to your generic datasource.
Master data is loaded separately from transaction data, so you will see your hierarchy from the moment you loaded it with the 0ORGUNIT hierarchy datasource into your infoobject 0ORGUNIT.

Problem while uploading master data through two files

Hi all,
When i try to upload master data of CUSTOMER with two files , Attribute and Text.
Text gets uploaded perfectly.
for Attribute, the data upload is done and psa i can see the exact data. But when i check the CUSTOMER object, i am not able to find the actually Attributs data. Instead those colmns are filed with 'E'.
Can anybdy please explain me wheret the problem is.
Thanks..

Hi Sun,
First check the data in PSA whether the records are fine or any discrepancy in them. Also check the properties of the COSTUMER object into which you are loading. The properties "type" or the "size" of the object may not be matching with the same in the file.
Check them and try to load once again.
Hope this helps u...
Regards,
Koundinya Karanam.
Edited by: koundinya karanam on Jan 15, 2008 12:05 AM

Problem in Activating Master Data 0mat_plant!!

Similar Messages

Maybe you are looking for