Problem in activating the environment in COPA operating concern

Dear Experts,
I got the following message when I tried to activate the environment based on client-specific part for my newly created operating concern.
<< Inconsistency in the dictionary for the structure "KOMK_KEY_U" >>
Does anyone know what happened?
By the way, the data structure is successfully created.
Regards,
Abraham

Hi Shanbagavali,
I had the same error today, when I tried to activate a transferrule based on a generic datasource.
In my case the reason was a field in the extract structure with data type "string" which is not allowed.
After removing this field from the extract structure I could activate the transfer rules.
Hope it helps.
Regards,
Stefan

Similar Messages

HT204088 I subscribed with Al Jazeera sport channel via their app in the App Store ..but I faced a problem in activating the subscribed channel, I did contact them and they requested me to contact you in order to refund the payment .. How can I refund my

I subscribed with Al Jazeera sport channel via their app in the App Store ..but I faced a problem in activating the subscribed channel, I did contact them and they requested me to contact you in order to refund the payment .. How can I refund my money ???

Apple - Support - iOS Apps - Contact Support

How to remove the Char.from one Operating Concern

Hi Guys,
How to remove the Char. from one Operating Concern.
I have created one Char. (WWDOC) and moved to Operating Concern (OOCC). Operating Concern is in red status.
Now, i want to remove that new assigned Char. (WWDOC)from the operating concern (OOCC). I did't find any option in the menu also.
Appreciate your help.....
T&R
VVR

Hi Sasi,
Iam not able to push back that char. from my operating concern. In help it is given you have to delete the data contents in the table before pushing back. Please let me know if any other option available.
Thanks for your reply.
VVR

BI7.0 Hexdecimal values problem while activating the data in DSO

Hi Friends,
                 I've got the data upto PSA and i've run DTP also from PSA to DSO, but while activating the data in DSO from New Data Table to Active Data Table, it's giving the error given below:
Error when assigning SID: Action VAL_SID_CONVERT table
0DOC_HD_TXT
Value '1st disb' (hex. '00310073007400200064006900730062') of          characteristic 0DOC_HD_TXT contains invalid characters
Process 000037 returned with errors.
            it isn't accepting the values like with numberels and chars together
ex: 1st disb, 70 cr Gen Hsg.
               I want the same to be in the report, how these are to be allowed?, i don't want to edit in PSA and there are a lot of values like that i can't edit all those, since there are thousands of records.
Regards,
BalajiReddy

Hi Anil,
                   Thanx for your quick replay, i've allowed ',' in RSKC and i've checked the check box LOWER CASE LETTERS for IO 0DOC_HD_TXT, the problem was almost solved out. What does ',' mean by?
                      Why lower case letter has to be checked only for this IO (0DOC_HD_TXT), not for others? if it is checked, it allows only lower cases, doesn't allow upper cases i think. won't there be any problem? if it is done like that?
        pls tell me the reason, i'm really thankfull for your quick replay
Regards,
BalajiReddy

Problem after activating the ECC 6.0 DIMP

I am getting the serious problem after doing the activation of this ECC 6.0 DIMP by installing some package.
What the problem is that the tables which are having the table class W are giving the problems.
Suppose whenever you are reterving data from this type of tables it is taking so much of time and finally a runtime error is coming showing TIME OUT.
Might be after installing that package we have to regenerate the tables. and how to do that i don;t know.
So all the tables which are having the table class W ,E and S are giving the problems.
For eg table DD02l this is the table for table fields and when i am making some changes in this table by using access key and after that if i have to make activate
it , it is going for short dump and similar cases are there for the tables of the condition type.
Please give me your helpful answers to solve this issue.
Thanks

Hi
From the command prompt following command i am executing
c:\dump\oracle\NT\IA64>sapserver.cmd
After executing the command Screen1 appears
Screen1
**********************************************************************************
Specify the drive letter of the local disk where
you want to install the oracle software
Local Disk Drive [C:]:D:
SID (consists of 3 alphanumeric characters,
starting with a letter (a...z)):D11
***********************************************************************************
After giving the parameter as shown in Screen1 the Screen2 will be popup and it stay for 2min and then close automatically and screen1 will come to normal prompt
Screen2
***********************************************************************************
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from C:\DOCUME1\ADMINI1\LOCALS~1\Temp\Orainstall2007-11-30_08-20-49PM. Please wait ...
*************************************************************************************
I cant found what is actual problem why OUI is not starting
Thanks and Regards,
Vishal Kalekar

Problem in activating the data source using a web service

Hi all,
I have created a web service with Logical and Source System names and i have selected nothing in the Type and Release.
Activated the created web service.
Later i tried creating a data source based on this web service source system and tried activating the data sources.
But it is throwing an error saying that error generating the Web Service /BIC/CQWEB_SER_000020000 and error while activating the data source.
Can any one say why is this happening and is there any pre requisites to be done while creating the web service?
what is the use of Type and Release while creating the webservice?
Thanks,
Pra.

Hi
Please consider reference tables also while creating view, otherwise it won't accept when there are amount and currency fields.
Please have a look at the below url
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=genericdatasourceusingview&cat=sdn_all
thanks,
Teja

Problem in activating the ODS

Hi experts,
while activating the data in the ODS , I am getting the following errors.
"System error ocurred(RFC Call)"
Activation of data records from ODS object XXX terminated
"Task 0031 for parallel SID assigment terminated with errors"
"Task 0021 for parallel SID assigment terminated with errors"
"Task 0009 for parallel SID assigment terminated with errors"
"System error ocurred(RFC Call)"
Task 004 2for parallel SID assignment terminated with errors.
When I saw the dump I found the following message
How to correct the error
"MESSAGE_TYPE_X" C
"SAPLRSATREE " or "LRSATREEF28 "
"RSATREE_START_ACTIVATION"
I
                                                                                Information on where termination occurred
The termination occurred in the ABAP program "SAPLRSATREE " in
"RSATREE_START_ACTIVATION".
The main program was "SAPMSSY1 ".
The termination occurred in line 536 of the source code of the (Include)
program "LRSATREEF28 "
of the source code of program "LRSATREEF28 " (when calling the editor 5360).

Hi Kris,
Do u have any red requests in ur ODS Manage. This error is caused when u have red requests and still u r trying to activate the data in the ODS.
Or Probably u have check the check box for bex reporting in setings of ods, Uncheck it and ur error will go.
Try these and let us know
Regards
Majeed

Ran into a problem by activating the SharePoint Server Publishing feature

By activating the "SharePoint Server Publishing feature" at site level the complete look and feel of the site has been changed to a default page layout , all the customization's were removed.
Changes were not rolled back even after deactivating the feature.
any help on how to get back my look and feel is appreciated.
Thanks in advance.
Regards
Bhaskar

Hi,
How did you customize the site initially? Was that in SharePoint designer? And if so what part of it did you exactly customize? The page itself or the masterpage?
Regards,
Casper

Account based copa - operating concern currency significance

Hello All,
we have implemented Account based copa and the operating concern currency in EUR.
no other fields in KEAo is activated like the company code currency and other fields.
the company code currency and the controlling area currency is SEK (Swedish Kroner)
sap note 69384 specifies that For account based PA, the operating concern currency is unimportant.
when we are trying to post a FI document, it is not asking for conversion from SEK to EUR
i tried posting to cost center and it got posted without asking for the conversion rate from SEK to EUR.
but when we are trying to post a controlling document(Account based COPA), it is asking for a converision rate from SEK to EUR.
can some one please clarify on why the conversion rate is required for account based copa.
Kind regards
SAP student

Hi
As far as posting to cost center is concerned, it is concerned with your controlling area.. It has nothing to do with your op concern.. Since your comp code and contr area currency is same, it does not ask for exchange rate
But the moment you post into COPA, where in you have specified another currency EUR, it asks for a conversion reason being your comp code currency is not same as EUR...
Even though op concern currency not reqd for account based COPA, but since you have specified it as EUR, it wud ask for a conversion rate
Hope this clarifies
Ajay M

COPA - Operating Concern

I seem to have accidently partially activated the S_AL operating concern which in turn created additional fields in structures ACCTSD and COPAFIELDS, this was all done in our Dev client. Our Dev client is now not in line with our QA and Prod clients. Is it possible to reverse what I have done and remove the additional fields created?
Thanks
Greg

Hi,
Go T.code: KEA0
Go to Change operating concen and them go to Data structure.
Then go to value Value fields and select fields that you have created and not required in the left hand side column (data structure) and move them by clicking on arrow to right side column (transfer from).
Assign points if helpful.
Regards,

RFC problem while activating the new ODS...

Hi Experts,
I have created a new ODS, while activating that it is giving bellow error message,
RFC ERROR IN THE SOURCE SYSTEM.
but I have checked with my basis team, everything is fine,
What would be the problem.
helpful answer will be appreciated with points,
Thanks in advance,
Venkat.

hi all,
iam even getting the same error and unable to solve this.please provide me solution with step wise process.iam getting the below error:
Message no. RSBM035
Diagnosis
The system could not create DataSource .
System Response
The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
Procedure
Consult the appropriate developer (function module: RSA1_OLTPSOURCE_GENERATE).
thanks&regards
Vamshi

Problem while activating the DSO

Hi-
I have some invalid characters in the reference document number which is causing not to activate the DSO. I found the document numbers which is causing the problem. They are not more than 2, so I thought to put a filter in the DTP. It is not allowing me to exclude the document numbers in DTP. It is only allowing me to keep the single values.
Please let me know how to exclude the affected document numbers so that my DSO gets activated.
This is a production issue and please get back to me with ur suggestions.

Hi n p,
In DTP screen at filter>mutlipule selection>exclude single values-->multiple selction..you can check the seleted the values to which you want to exclude them into filter.
Hope this help you
Thanks,
Praveena.

A problem in activating the BlackBerry service

problem in bb8900. bbm not work and browser, please help
mhbh

Hello again.
Interesting choice you have made -- to simply repost the exact same message from before. So, in light of zero details from you, you force us to guess -- hopefully we will guess right. The risk is yours.
I suggest the following steps:
1) Register HRT
Homescreen > Options > Advanced Options > Host Routing Table > BBKey (it does not matter which line is current) > Register Now
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then please provide us something more to go on...your economy with words, while admirable, makes it very difficult to provide you with anything meaningful.
Thanks.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem with activating the playbook in first use

Hello everybody
I have very serious problem with my playbook and I hope you can guide me.
I live in Iran and I've recently bought a new blackberry playbook.
Actually I chose playbook after spending too much time on comparison between different kinds of tablets,but unfortunaely it spoiled all of my researchs because I didn't know about the annoying problem of initial setting.
I can't use my tablet because when I try to updat it,gives a message saying: "could not activate this tablet(3001)
please try changing your settings". while there isn't any problem with my Wi-fi or Internet settings.
After a lot of checking and searching about the problem,I understood it is due of some ip prohibitions problem.
Apperantly,Blackberry servers have bloked IP Addresses originated from Iran,so there is such a annoying problem.
I've been advised to try to configure my tablet in a different way so that it will be recognized from another country and will obtain the updates,but I don't know how I exactly can apply adequate settings.
I hope you can guide me to solve my problem.

Hi jybo77
Actually I couldn't solve the problem with my own. I tried all the solutions with free proxy servers and even I made a proxy server on my pc ,but none of them worked!
At last I returned the tablet to the compony which I purchased it from and the technical support guys solved the problem.Unfortunately they didn't tell me what exactly did,I just know it hadn't been very easy.
I suggust you do the same thing and use the technical support services of the vendor,because they have much more
experience with such problems and can use some additional advantages of being in contact with Blackberry company
technicians.
I hope you can use your playbook soon as I do.

Problem in Activating the Program in Unicode Systems

Dear ABAPers,
I am working in the Upgradation project.In our Project we are moving the objects from SAP 4.6c to ECC6.0 version.I have copied one program from SAP 4.6c to ECC6.0.When i am checking it gives the following error
PERFORM accepted TABLES i_coss USING zcoss quantity hour.
"I_COSS" cannot be converted to the line incompatible. The line type must have the same structure layout as "I_COSS" regardless of the length of a Unicode . Unicode character. Unicode character.
Please Give me the solution for this Problem.
Thanks & Regards,
Ashok.

Hi,
in the form routine you have to declare the same structure as table i_cross is using.
for example:
types: begin of s_coss,
            field1 type c,
            field2 type c,
           end of s_coss.
data: i_coss type standard table of s_coss.
perform accepted TABLES i_coss USING zcoss quantity hour.
form accepted tables t_coss structure s_coss
                      using p_coss type ...
                               p_quan type....
                               p_hour type ....
Kostas

Problem in activating the environment in COPA operating concern

Similar Messages

Maybe you are looking for