Problem in activating the tables

Hi group,
I have a question while activating some standard data elements. Actually, I have got some tables when I implemented an OSS Notes in my system.
I did some changes to the data elements but, the thing is that, when I tried to change the "field labels" of them and tried to "activate" them, they were not getting activated. And in the data elements, it is showing like
"Modified/Active" state only even when I activated them.
And when I ignored them and went on to transport them to quality and then, I was able to see some warning messages like "tables were not activated" and also "data elements were not activated"
So I request kindly to help me in solving this issue.
thanks in advance.
Regards,
Vishnu.

Hi Narayana,
thanks for replying.
No my concern is only one thing. Why the option "Modified/Active" is not gettting changed for the data elements? Does it mean the object is not activated?
In that case, how can we activate it?
If this is done, I think, everything will be solved automatically.
so please kindly let me know how we can activate the data elements?
thanks and regards,
Vishnu.

Similar Messages

Problem after activating the ECC 6.0 DIMP

I am getting the serious problem after doing the activation of this ECC 6.0 DIMP by installing some package.
What the problem is that the tables which are having the table class W are giving the problems.
Suppose whenever you are reterving data from this type of tables it is taking so much of time and finally a runtime error is coming showing TIME OUT.
Might be after installing that package we have to regenerate the tables. and how to do that i don;t know.
So all the tables which are having the table class W ,E and S are giving the problems.
For eg table DD02l this is the table for table fields and when i am making some changes in this table by using access key and after that if i have to make activate
it , it is going for short dump and similar cases are there for the tables of the condition type.
Please give me your helpful answers to solve this issue.
Thanks

Hi
From the command prompt following command i am executing
c:\dump\oracle\NT\IA64>sapserver.cmd
After executing the command Screen1 appears
Screen1
**********************************************************************************
Specify the drive letter of the local disk where
you want to install the oracle software
Local Disk Drive [C:]:D:
SID (consists of 3 alphanumeric characters,
starting with a letter (a...z)):D11
***********************************************************************************
After giving the parameter as shown in Screen1 the Screen2 will be popup and it stay for 2min and then close automatically and screen1 will come to normal prompt
Screen2
***********************************************************************************
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from C:\DOCUME1\ADMINI1\LOCALS~1\Temp\Orainstall2007-11-30_08-20-49PM. Please wait ...
*************************************************************************************
I cant found what is actual problem why OUI is not starting
Thanks and Regards,
Vishal Kalekar

HT204088 I subscribed with Al Jazeera sport channel via their app in the App Store ..but I faced a problem in activating the subscribed channel, I did contact them and they requested me to contact you in order to refund the payment .. How can I refund my

I subscribed with Al Jazeera sport channel via their app in the App Store ..but I faced a problem in activating the subscribed channel, I did contact them and they requested me to contact you in order to refund the payment .. How can I refund my money ???

Apple - Support - iOS Apps - Contact Support

Error While Activating the Table

i have created a table name ZEMPLOY11 in ABAP Dictionary containing fields Client [NUM] Carieer [NUM] Firstname [CHAR] and Surname [CHAR] and save it . when i activated this table it shows and error Mesage "Errors occurred during activation". kindly help me out
i have created few more tables and faceing the same problem
Regards
Ammad

Hi Ammad,
Could you please paste the error what you are getting so that we can help you in a bettre way, I think most probably you haven't assign a key variable while creating the table, so in the screen where you have mentioned the fiels Client NUM Carieer NUM Firstname CHAR and Surname CHAR ,mark client and carrioer as key fields, then try to activate it after setting the technical setting of the table.
Hope now you will able to activate your tables.
Pooja

BI7.0 Hexdecimal values problem while activating the data in DSO

Hi Friends,
                 I've got the data upto PSA and i've run DTP also from PSA to DSO, but while activating the data in DSO from New Data Table to Active Data Table, it's giving the error given below:
Error when assigning SID: Action VAL_SID_CONVERT table
0DOC_HD_TXT
Value '1st disb' (hex. '00310073007400200064006900730062') of          characteristic 0DOC_HD_TXT contains invalid characters
Process 000037 returned with errors.
            it isn't accepting the values like with numberels and chars together
ex: 1st disb, 70 cr Gen Hsg.
               I want the same to be in the report, how these are to be allowed?, i don't want to edit in PSA and there are a lot of values like that i can't edit all those, since there are thousands of records.
Regards,
BalajiReddy

Hi Anil,
                   Thanx for your quick replay, i've allowed ',' in RSKC and i've checked the check box LOWER CASE LETTERS for IO 0DOC_HD_TXT, the problem was almost solved out. What does ',' mean by?
                      Why lower case letter has to be checked only for this IO (0DOC_HD_TXT), not for others? if it is checked, it allows only lower cases, doesn't allow upper cases i think. won't there be any problem? if it is done like that?
        pls tell me the reason, i'm really thankfull for your quick replay
Regards,
BalajiReddy

Problem in activating the data source using a web service

Hi all,
I have created a web service with Logical and Source System names and i have selected nothing in the Type and Release.
Activated the created web service.
Later i tried creating a data source based on this web service source system and tried activating the data sources.
But it is throwing an error saying that error generating the Web Service /BIC/CQWEB_SER_000020000 and error while activating the data source.
Can any one say why is this happening and is there any pre requisites to be done while creating the web service?
what is the use of Type and Release while creating the webservice?
Thanks,
Pra.

Hi
Please consider reference tables also while creating view, otherwise it won't accept when there are amount and currency fields.
Please have a look at the below url
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=genericdatasourceusingview&cat=sdn_all
thanks,
Teja

Error on activating the table "DB length of the key of table too large"

Hi Experts,
I am getting the error while activating my table PSM_REQ_BO_ELM_NAME. Activation error log is as follows
"DB length of the key of table PSM_REQ_BO_ELM_NAME is too large (>900)"..
I have a table which has 4 filed as key one with char 6 and rest 3 with char 120 each.
Could you please help me to get rid of this error.
Thanks in advance.
Regards,
Pradeep

When ever we create a table in Data dictionary, a corresponding database table will be created in Data base server. For the primary key we maintained in Data Dictionary, another data base table will be created seperately where as the table length should not exceed some limit set by the Administrator.
So, Reduce the length of the primary key in the table by deleting the field as key field/ reducing the size of the field.
In your case, maintain the primary key field length not more than 400.
***Length if the Primary key should not exceed 120. other wise performance will be low while fetching the data.

Problem for Accessing the Table BDCP..CDPOS..CDHDR..

Hi Guys,
i have the problem of accessing the BDCP table.it is working fine in development and testing server.it is taking more time in background in Production server..can anyone help me to optimize this code and please suggest me if i can change anyof the below logic..
Thanks a lot in advance.
LOOP AT t_cdobjid.
    objectid-low = t_cdobjid-cdobjid.
    objectid-sign = 'I'.
    objectid-option = 'EQ' .
    APPEND objectid.
    CLEAR objectid.
    count = count + 1.
    IF count = 50.
      CLEAR count.
      SELECT * FROM bdcp APPENDING TABLE t_bdcp
      WHERE cretime IN r_cretime AND
            tabname = 'DMEAN' AND
            fldname = 'KEY' AND
      cdobjid IN objectid.
      CLEAR : objectid.
      REFRESH: objectid.
    ENDIF.
ENDLOOP.
IF NOT objectid[] IS INITIAL.
    SELECT * FROM bdcp APPENDING TABLE t_bdcp
      WHERE cretime IN r_cretime AND
            tabname = 'DMEAN' AND
            fldname = 'KEY' AND
    cdobjid IN objectid.
    CLEAR : objectid.
    REFRESH: objectid.
ENDIF.
IF NOT t_bdcp[] IS INITIAL.
    t_bdcp_val[] = t_bdcp[].
    DESCRIBE TABLE t_bdcp_val LINES l_lines.
    l_max = 50.
    l_mod = l_lines MOD l_max.
    IF l_mod > 0.
      l_loopcount = ( l_lines DIV l_max ) + 1.
    ELSE .
      l_loopcount = l_lines DIV l_max.
    ENDIF.
    DO l_loopcount TIMES.
      CLEAR t_bdcp_emt.
      REFRESH t_bdcp_emt.
      IF sy-index = l_loopcount.
        t_bdcp_emt[] = t_bdcp_val[].
      ELSE.
        APPEND LINES OF t_bdcp_val FROM 1 TO l_max TO t_bdcp_emt.
        DELETE t_bdcp_val FROM 1 TO l_max.
      ENDIF.
      SELECT * FROM cdpos APPENDING TABLE t_cdpos_upc
          FOR ALL ENTRIES IN t_bdcp_emt
                   WHERE
                   objectclas = 'MATERIAL' AND
                   objectid   = t_bdcp_emt-cdobjid AND
                   changenr   = t_bdcp_emt-cdchgno AND
                   tabname IN ('DMEAN', 'MARA' ) AND
                   fname   IN ('KEY', 'EAN11' ) .
    ENDDO.
    CLEAR   : l_lines ,
              l_mod ,
              l_loopcount.
       IF sy-subrc EQ 0.
    IF NOT t_cdpos_upc[] IS INITIAL.
      t_cdpos_del[] = t_cdpos_upc[] .
      DELETE t_cdpos_del WHERE tabname EQ 'MARA' .
      SORT t_cdpos_del BY changenr .
      LOOP AT t_cdpos_upc .
        READ TABLE t_cdpos_del WITH KEY
                   changenr = t_cdpos_upc-changenr
                   BINARY SEARCH .
        IF sy-subrc EQ 0 AND
          t_cdpos_upc-chngind = 'U' .
          DELETE t_cdpos_upc WHERE changenr = t_cdpos_upc-changenr
                              AND chngind = 'D' .
        ENDIF.
        t_upc_matnr-matnr = t_cdpos_upc-objectid .
        APPEND t_upc_matnr .
      ENDLOOP.
      SORT t_upc_matnr BY matnr .
      DELETE ADJACENT DUPLICATES FROM t_upc_matnr COMPARING matnr .
      IF NOT t_cdpos_upc[] IS INITIAL.
        t_cdpos_upc_val[] = t_cdpos_upc[].
        DESCRIBE TABLE t_cdpos_upc_val LINES l_lines.
        l_max = 50.
        l_mod = l_lines MOD l_max.
        IF l_mod > 0.
          l_loopcount = ( l_lines DIV l_max ) + 1.
        ELSE .
          l_loopcount = l_lines DIV l_max.
        ENDIF.
        DO l_loopcount TIMES.
          CLEAR t_cdpos_upc_emt.
          REFRESH t_cdpos_upc_emt.
          IF sy-index = l_loopcount.
            t_cdpos_upc_emt[] = t_cdpos_upc_val[].
          ELSE.
            APPEND LINES OF t_cdpos_upc_val FROM 1 TO l_max TO
                                                t_cdpos_upc_emt.
            DELETE t_cdpos_upc_val FROM 1 TO l_max.
          ENDIF.
          SELECT * FROM cdhdr APPENDING TABLE it_cdhdr_upc
                           FOR ALL ENTRIES IN t_cdpos_upc_emt
                            WHERE objectclas EQ 'MATERIAL'
                           AND   objectid = t_cdpos_upc_emt-objectid
                           AND   changenr = t_cdpos_upc_emt-changenr.
        ENDDO.
      ENDIF.
Prabhu

Use the PACKAGE SIZE oprion of the SELECT statement:
LOOP AT t_cdobjid.
objectid-low = t_cdobjid-cdobjid.
objectid-sign = 'I'.
objectid-option = 'EQ' .
APPEND objectid.
CLEAR objectid.
ENDLOOP.
SELECT * FROM bdcp APPENDING TABLE t_bdcp
PACKAGE SIZE 5000
WHERE cretime IN r_cretim AND
        tabname = 'DMEAN'   AND
        fldname = 'KEY'     AND
        cdobjid IN objectid.
ENDSELECT.
IF NOT objectid[] IS INITIAL.

Webdynpro table sorting problem, its hiding the table while sorting

Hello All,
I have a stardard webdynpro application in our portal, when i am pressing sorting button on a table it is hiding the table,
please share your idea and please help me to get it resloved,
Cheers,
Appa

Hi Appa,
let's try to narrow down the problem:
please tell us which application it is about. Is it reproducible for any kind of table in any other standard webdynpro for java applications, or only for this one? Do you face this problem when you use any kind of browsers like firefox, internet explorer?
Thank you!
Best Regards,
Ervin

Problem in activating the ODS

Hi experts,
while activating the data in the ODS , I am getting the following errors.
"System error ocurred(RFC Call)"
Activation of data records from ODS object XXX terminated
"Task 0031 for parallel SID assigment terminated with errors"
"Task 0021 for parallel SID assigment terminated with errors"
"Task 0009 for parallel SID assigment terminated with errors"
"System error ocurred(RFC Call)"
Task 004 2for parallel SID assignment terminated with errors.
When I saw the dump I found the following message
How to correct the error
"MESSAGE_TYPE_X" C
"SAPLRSATREE " or "LRSATREEF28 "
"RSATREE_START_ACTIVATION"
I
                                                                                Information on where termination occurred
The termination occurred in the ABAP program "SAPLRSATREE " in
"RSATREE_START_ACTIVATION".
The main program was "SAPMSSY1 ".
The termination occurred in line 536 of the source code of the (Include)
program "LRSATREEF28 "
of the source code of program "LRSATREEF28 " (when calling the editor 5360).

Hi Kris,
Do u have any red requests in ur ODS Manage. This error is caused when u have red requests and still u r trying to activate the data in the ODS.
Or Probably u have check the check box for bex reporting in setings of ods, Uncheck it and ur error will go.
Try these and let us know
Regards
Majeed

Problem in accessing the table

Hi,
My database in 10g (10.2.0.4), I have created one user TEST and given insert,update,delete on ABC table to TEST from XYZ user.
Also,
Grant select any table to test;
but when i connect with test and accessing tables of xyz it is showing error 'table or view does not exist' and i select the table with xyz.abc then i can select the table of xyz.
I do not want to create any synonyms for this table. Can you please help while accessing the table from TEST user without username.tablename
Anand

Anand Vyas wrote:
Actually i have given the example of one table but i have given grant on many table to TEST user.
Also end user uses these tables in application and he can not agree to set alter session in his application.
Is there any way to access the tables of XYZ which i have given the grant to TEST without username.tablename means xyz.abc
Thanks in advance.
AnandGiven your other requirements/restrictions, your only option is to create a synonym. Why do you not want to do that? If you have many of them, you can "write a sql to write a sql"
spool doit.sql
select 'create or replace public synonym ' ||
           table_name ||
           ' for xyz.' ||
           table_name ||
from dba_tables
where owner = 'XYZ';
spool off

Ran into a problem by activating the SharePoint Server Publishing feature

By activating the "SharePoint Server Publishing feature" at site level the complete look and feel of the site has been changed to a default page layout , all the customization's were removed.
Changes were not rolled back even after deactivating the feature.
any help on how to get back my look and feel is appreciated.
Thanks in advance.
Regards
Bhaskar

Hi,
How did you customize the site initially? Was that in SharePoint designer? And if so what part of it did you exactly customize? The page itself or the masterpage?
Regards,
Casper

Problem while partitioning The Table

create table Employee ( empno number(3), name varchar2(10), deptno number(4))
partition by range(deptno)
(partition p1 values less than(11),
partition p2 values less than(21),
partition p3 values less than(31));
create table Employee (
ERROR at line 1:
ORA-00439: feature not enabled: Partitioning
Please help me for solving this problem and send me the details I need to partition my table.
Thanks in advance.
w.regards
R.Satish

Looks like you don't have partition license or don't have a complete install of Oracle version 8.0.5. The best way to check is do a sqlplus user/passwd and look for a message that said "Production with the Partitioning and objects options" to appear before the SQL> prompt. Hope this helps....
<BLOCKQUOTE>quote:<HR>Originally posted by rkumar:
create table Employee ( empno number(3), name varchar2(10), deptno number(4))
partition by range(deptno)
(partition p1 values less than(11),
partition p2 values less than(21),
partition p3 values less than(31));
create table Employee (
ERROR at line 1:
ORA-00439: feature not enabled: Partitioning
Please help me for solving this problem and send me the details I need to partition my table.
Thanks in advance.
w.regards
R.Satish <HR></BLOCKQUOTE>
null

Problem in reading the table entries using RFC_GET_TABLE_ENTRIES:

Hi All ,
We are tryiong to read the infocube /BIC/ACDPBARCO00 ( Table ) from BW using the above FM . We are successful in reading the data but , last but one field is appearing as ####### . Actually that particular filed has some data in BW side .
Could you suggest m,e what the problem is and how to correct that data ?
Thanks ,
Dharma .

Hi ,
Are you pulling entries by passing only Table Name or with field names.
If it is based on field names, Please check all field names are correctly passed to this function module or not.
If this FM doesn't work then try with RFC_READ_TABLE, which does the same task.
Regards,
Ravi Sankar,.Z

RFC problem while activating the new ODS...

Hi Experts,
I have created a new ODS, while activating that it is giving bellow error message,
RFC ERROR IN THE SOURCE SYSTEM.
but I have checked with my basis team, everything is fine,
What would be the problem.
helpful answer will be appreciated with points,
Thanks in advance,
Venkat.

hi all,
iam even getting the same error and unable to solve this.please provide me solution with step wise process.iam getting the below error:
Message no. RSBM035
Diagnosis
The system could not create DataSource .
System Response
The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
Procedure
Consult the appropriate developer (function module: RSA1_OLTPSOURCE_GENERATE).
thanks&regards
Vamshi

Problem in activating the tables

Similar Messages

Maybe you are looking for