Problem in activating Transfer rules

Hi Experts,
                      I could not able to activate transfer rules using program "RS_TRANSTRU_ACTIVATE_ALL" by giving source system name and Infosource in Quality system.I am getting success status "No Transfer Structure Selected" but still transfer rules are in inactivate.I tried replicating  data sources also still problem persists.
Please provide any suggestion how can i go about it.
Edited by: Sunilbm on Oct 30, 2009 12:16 PM

Hi,
Is there any error message when the transfer rules are transported from Dev to Quality?
Are the transfer rules transported from Dev to Quality successfully.
Post the message if any when the transport request is moved from Dev to Quality.
Regards,
Rama Murthy.

Similar Messages

  • Problem while transporting transfer rules in BW 3.5

    Hi All,
    I have a problem while transporting transfer rules in BW 3.5.
    I have just checked the box for conversion to Transfer structure / Transfer rules of an infoobject and tried to transport it to quality. I got this below error message:
    The selections   T ZBW_ZBILLRATP_TEXT_BA specify more than one DataSource
    Diagnosis
    You need to select an individual DataSource based on the selection conditions
    InfoSource =
    Source System =
    Object Version = T
    Transfer Structure = ZBW_ZBILLRATP_TEXT_BA
    although the select event is not unique.
    Procedure
    Check the objects to which the selection applies.
    Reference to transfer structure ZBW_ZBILLRATP_TEXT_BA not available. No activation possible.
    Message no. RSAR436
    Diagnosis
    Transfer structure ZBW_ZBILLRATP_TEXT_BA should be transported into this system.
    However, no DataSource mapping refers to this transfer structure.
    System response
    The transfer structure was not activated or deleted.
    Procedure
    Ensure that DataSource mapping, with a reference to the transfer structure ZBW_ZBILLRATP_TEXT_BA is on the same transport request. Use the transport connection to create a consistent request.
    Can any one provide me details of how to overcome this issue. I tried transporting all related objects.
    Regards
    Lakshmi

    Hi Lakshmi,
    Befor Transporting the Transfer rules, make sure that you are transporting the Active Versions of your Datasource & DataTarget between which your transfer rules exist.
    Also make sure that the Transfer rules are active before it is transported.
    Hope it helps!
    Regards,
    Pavan

  • Error : Activating transfer rules

    Hello Experts,
    I get the message "Error Generating Program" while activating the transfer rules.
    The detailed error message refers to RSAR245 or note 636217. Note refers to table row size being exceeding 1962 bytes. But my transfer structure row size is below 300 bytes.
    Any suggestions appreciated.
    Thanks,
    Sweatha

    Hi Sweatha,
    Sometimes I have experimented this kind of error when activating transfer rules. It seems that there is some content in the buffer that provokes this error. I suggest you to log off the system, login again and try to activate the transfer rules.
    Regards,
    Andreu

  • Error while activating transfer rules needs help.

    The error while activating 0FI_AP_6 transfer rules is listed below.
    ''InfoObj. 0DEBITOR from fld KUNNR of dataSource 0FI_AR_6 is not active but BCT ex. -> Dtl'' how to resolve this issue and activate transfer rules?

    Hi
    The problem is with your data source replication.
    Activate your data source & replication too.
    Activate your transfer atructure through RS_TRANSTRU_ACTIVATE_ALL .
    If not so, Activate your transfer rule manually.
    Regadrs
    Saravanan.ar

  • Problems to activate transfer rules and infosource 2lis_02_itm and 2lis_02_

    hello,
    now I am working with the 0PUR_C01 cube of purchasing and I want to active the data flow before for it.
    I try to do it directly selecting data flow before in the activation settings of the cube, but I coludn´t
    after that, I try to do it activating the transfer rules and the infosource separately  but I get some errors, teh most important thing (because I have the same situation in other areas) is:
    The creation of the export DataSource failed
    Message no. RSBM035
    Diagnosis
    The creation of the DataSource &v1& was unsuccessful.
    System Response
    Whilst generating the export InfoSource, the metadata for a DataSource must be generated. An error arose when doing this.
    Procedure
    Consult the appropriate developer (function module: RSB1_OLTPSOURCE_GENERATE).
    I hope that some can help me with this issue,
    Thanks in advance and best regards,
    Niurka

    Thank you very much Chetal,
    I activated others Infocubes, but I have the same problem for Infocubes with ODS inside they data flow,
    I tried with some notes like: 538052 and I enter the client but not the user or the server, I proved the RFC Connection too.
    But the bug issue is the export data source creation that failled everytime, right now  I try to solve this and the log says some error about the syntax error in transfer routine for the infobject 0GN_R3_SSY this object exist as characteristic and his convertion routine is ok (because I verificated) and exist as part of the transfer rule but I don't know how to go to the routine creator for check this point.
    Thank you very much in advance,
    Niurka.

  • RSAU461, problem with activating update rules for cube 0csrv_c01

    Hello,
    I have added new fields to data source 0CRM_SRV_PROCESS_H, then changed transfer rules, added characteristics to ODS 0crm_proh, and reactivated update rules 80crm_proh. But now I have problem with second update rules for this cube named 80crm_cnfh. It is not active and all fields in it have red status, error RSAU461, and I cannot activate it.
    What I should do? Should I change somehow that second source for data to my cube (change infosource, ods, rule?)
    Regards
    Radek

    hi
    As said by the Mti u have just changed the info objects in the ods and u need to map them with the specific info objects from the ods.
    double click on the Update rules of the cube and go to the characteristic tab there map the newly added info objects with the IO in the ods.
    Khaja

  • BI Content Error when activating transfer rule / SAPSQL_ARRAY_INSERT_DUPREC

    Hello Experts,
    when i want to iinstall the transfer rule /CRMBW/OLTP_OPPORTUNITY_ITEM
    from Data Source /CRMBW/OLTP_OPPORTUNITY_ITEM to InfoSource
    /CRMBW/OPPORTUNITY_I  (all Business Content Objects) Iam facing the following situation:
    1. When I use "Simulate Installation" i get the warning for all of the fields: Field APP_SERVER is not supported by DataSource /CRMBW/OLTP_OPPORTUNITY_ITEM in source system SLOGICOCRM. Transfer rules were deleted however, delivered.
    2. When I use "Installation" i get a  dump of the following type:
        Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
        Except.                     CX_SY_OPEN_SQL_DB
        Error in the ABAP Application Program
        The current ABAP program "CL_RSAR_FORMULAS==============CP" had to be
         terminated because it had come across a statement that unfortunately cannot be executed.
        More details of the dump are:
        Trigger Location of Exception
        Program                                 CL_RSAR_FORMULAS==============CP
        Include                                 CL_RSAR_FORMULAS==============CM00E
        Row                                     40
        Module type                         (METHOD)
        Module Name                       GENERATE_ACTIVE_VERSION
    The problem is, i can not map the transfer rule by myself because the the transfer structure contains some important Routines and Formulas which are missing in thereports and i dont know the source code they are using.
    Can anybody help me?
    Greetings from Barcelona
    Oliver
    Edited by: STRATESYS CONSULTING on Jul 23, 2009 2:35 PM

    Hi Oliver,
    Can you please check if you can use the SAP notes 1263075 and 985052 to resolve the problem?
    Best Regards,
    Des

  • Dump when activating transfer rules

    Hi All,
                 I am trying to create transfer rules and activate from a DB connect source system and I am getting the following error when activating.
    Runtime Errors         ASSERTION_FAILED
    Short text                                                                               
    The ASSERT condition was violated.                                                                               
    What happened?                                                                               
    In the running application program, the ASSERT statement recognized a                        
        situation that should not have occurred.                                                     
        The runtime error was triggered for one of these reasons:                                    
        - For the checkpoint group specified with the ASSERT statement, the                          
          activation mode is set to "abort".                                                         
        - Via a system variant, the activation mode is globally set to "abort"                       
          for checkpoint groups in this system.                                                      
        - The activation mode is set to "abort" on program level.                                    
        - The ASSERT statement is not assigned to any checkpoint group.                              
    Can somebody help me with this error?
    Thank you.

    BI User
    Please check the OSS Notes 914998 and 791549 and see these notes helps
    Thnaks
    Sat

  • Activating transfer rules for new source system

    Hi
    we are having 2 R/3 source system in BI. I had activated all the transfer rules with the first source system and now i have created a new source sytem connecting to a different R/3 client. I tried to change the transfer rules point to the new source system using the program RS_TRANSTRU_ACTIVATE_ALL giving the new source system and the infosource name. But i get the error "No Transfer Structure Selected" when i execute the prg.
    how can i change the source system without creating the transfer rules for the new source but use the existing transfer rules and just change the source system assigned to it????
    Regards
    Sujai

    Hi Sujai,
    There are many cases when this program is used.
    When the Trans rules get de-activated due to impact,we need to first replicate the data source and activate the TR using this program.This generally occurs during the data loads in prd.
    It does not makes sense to transport it when there r no changes done to the TR.So simply,u can use this program to activate.
    If the program does not work,then you are left with the transport option.
    Thanks & Regards,
    Suchitra.V

  • Activating Transfer Rules

    Hi All,
    After activating the Transfer Rules (means ) what will happen in bw side .  I mean what about psa & Transfer structure?  In the backend of the system exactly what happens while activating T.R's?(what structure formats will create).
    Its my interv ques.  Pls help me.
    Thanks inadvance,
    K. Yogeswaran.

    Hi,
    When you activate transfer rules your BW will create an extract structure, a PSA table, generate a program to write the extracted records into your PSA, generate a program for the transformation of your extract structure into the communication structure (you TRules).
    The PSA table is having exactly the same structure than your extract structure. Now imagine that you had data already in your PSA table.  If you remove a field from your extract structure, that would mean remoiving a field from your PSA table.
    Since you will loose data, the system will generate a new version of your PSA table. You can check the PSA table versions in table RSTSODS. Adding a field to the extract structure won't result in a new PSA table.
    hope this helps
    Olivier.

  • While activating Transfer rules....

    Hello BW gurus,
    I am extracting CO Transaction Data from SAP R/3 into BW. I replicated 0CO_OM_CCA_1 standard Data Source into BW and assigned BI Content 0CO_OM_CCA_1 Info Source .
    1) In the Transfer rules , all the fields from Data Source got mapped to the fields in Communication structure , other than those  fields I find some fields(extra) in communication structure which are empty, I mean those fields did not get mapped . 
    1) what is the reason behind it , what is the main concept ?
    2) how do I map these extra fields in communication structure ,and activate Transfer rules?
    Points will be alloted ,
    Thank you .

    Hi Prarthana,
    It is not mandatory that all the fields in Communication structure get mapped to the fields retrieved from source system. You can have extra fields in the communication structure means you can map some more fields from source using another data source by assigning same Infosource.
    Without mapping them, you can activate Transfer rules and load data.
    You can map them and load data into other fields using another datasource.
    Hope this helps u...
    Regards,
    KK.

  • Error while activating transfer rules

    Transfer method 'TRFC with PSA' is not supported by the source system
    Message no. RSAR508
    Diagnosis
    The PSA transfer method is used to transfer data from source system GBQ480 to transfer structure 0ASSET_ATTR_G4. Source system GBQ480 does not support a PSA transfer.
    Procedure
    Define the PSA in the source system.

    Change Transfer method to PSA in Transfer rules and then activate. If PSA is selected, you will not face this error.
    If you still face this error even after changing Transfer method, check below thread.
    Transfer method 'TRFC with PSA' is not supported by the source system
    Edited by: koundinya karanam on May 22, 2008 12:47 PM

  • Problem in migrating Transfer Rule (3.X) to Transformation (7.0)

    Hi All,
    I am working on migrating bussiness contents from 3.X to 7.0. Have migrated transfer rule into transformation successfully. But transformation remains inactive by default & as I try to activate it, system throws error.
    The error is associated to the formula used in rule as an syntax error.
    Formula - IF( KOART = 'D', BUSINESS_PARTNER, '' )
    Error - Formula element is not allowed here.
    I didnt change the formula after migrating. Infact it is same as it was in transfer rule - IF( Account type = 'D', BUSINESS_PARTNER, '' )
    'Account Type' is changed to 'KOART' by system itself during migration.
    Please suggest views to resolve the issue.
    Regards,
    Pritesh

    Though, migration of transfer rule into transformation done successfully, since BI 7.0 uses OO ABAP, u have to change routines code, formulas manually. 
    I think, u r missing ' ' for BUSINESS_PARTNER.
    Formula - IF( KOART = 'D', 'BUSINESS_PARTNER', '' )

  • Error when activating transfer rules

    Dear Experts,
                     I am getting the following errors when trying to activate my transfer structure. I am working on a system that has been just upgraded. So, any idea of what the problem could be?
    Here is the error:
    Mapping between data source 0FI_AR_3 and source system AMC_103 is inconsistent
    Message no. RSAOLTP380
    Thank you very much.

    Hi venkat
    Please check the OSS note 606437
    Sriram

  • Run time error while activating the Transfer Rules

    Hi,
    Error when activating Transfer rules for Infosource :
    0FI_GL_1 -
    (General ledger: Transaction figures)
    Run time error : ASSERTION FAILED
    Transfer rules traffic light is in Green. But when i am trying to activate the Transfer rules, its giving Run time error.
    Thanks,
    Kishore

    Hi,
    As mentioned in the note 939383 , either Import Support Package 08 for SAP NetWeaver 2004s BI (BI Patch08 or SAPKW70008) into your BI system or do correction instructions given in the note.
    It is always better to import the latest patches avialble in service market to avoid this type of problems.
    Also see tha note 1010672 amd check whether it is applicable to your problem.
    With rgds,
    Anil Kumar Sharma .P
    Message was edited by:
            Anil Kumar Sharma

Maybe you are looking for