Problem in activation of datasource
Hi ,
when Iam trying to activate the Datasource from RSA5 , It is asking for TR .When i created my Own TR and saving the object under the Created TR , it is showing the following error . Can you please help me out in this regard .
Error -- SAP names file for XXXXUser locked by another process
Thanks
PT
Hi,
its already present in another TR or is already active??
Go to the object directory for this data source by selecting it and on the top got->object directory entry->Lock overview.
This will show if its currently locked by some one....delete that TR or assign it to the same TR.
Thanks
Ajeet
Similar Messages
-
Error while activating BC datasources
Hi guys,
I am getting this error while activating BC datasources...it is only with my login, rest of the users can work well.
Error:
DataSource 0BP_ACTITLE_TEXT; switch to package BUPA_CENTRAL_DATA_BW is off
this happened with all DS in the BC, the problem occured because while activating initially my connection got disconnected and then this problem started.....
how do i rectify this? any help would be highly appreciated.....make sure that the server from which ur data source gets the values are also logged on
-
2LIS_04_P_MATNR - Prob in activating the Datasource in R/3
Hello,
I am trying to activate datasource 2LIS_04_P_MATNR in r/3 in Tcode : rsa6/rsa5 and I am getting a warning that says
The even-numbered length of the DEC field I_DLZ_EX can lead to problems
I serached and found that note : 641744 is applicable.
The solution in the note says that there are 3 options to rectify this error as below:
If the field is not manipulated in the customer exit or elsewhere, no processing is required.
If you change the field, the following possible solutions are available:
You can make sure that the number of the characters does not increase after the manipulation.
If you can change the extract structure of the DataSource without affecting other scenarios (for example, if it was generated in transaction RSO2), you can increase the length of the DEC field (or CURR, QUAN) there to the next odd character (in the example above: from DEC 4 on DEC 5).
If neither of these solutions are possible, you can use a customer append that contains a relevant DEC field (or CURR, QUAN) with the next highest odd length. This can be used for the result of the calculations. This means that you do not have to manipulate the previous field.
I am opting the 3rd option i.e. to use an append structure with a field QUAN(in my case) that has next highest odd length
I am using the field BDMNG(length 13) from table RESB. The feild mentioned in the warning have length 12.
The problem is still occuring.
Am I able to understand the note correctly or am I missing something?
Can anyone help here?Thanks Deva. I ignored the warning and went ahead with the enhancement.
After the activation of datasource I deleted and filled the setup tables, but the NPRT log showed 0 records.
Then after reading few threads at SCN I came to a conculsion that my setup table is refering to view CAUFV which does not contain data for order category AUTYP 10(PP Production Order) and therefore the data extracted is 0.
There was a thread mentioning the same problem that said (steps to fill the setup tables for 2LIS_04_PECOMP(Repetitive manufacturing Component view)) that the solution was to run OLIFBW Tcode after completing OLI4BW setup. So i did the same. But still my NPRT log still shows 0 records.
Also I checked AUFK table. It does not contain any data for AUTYP 10.
Please advise what should be the correct way to solve this. -
Problem in activating 0sd_c03 IC
Hi all
Here i am facing problem in activating BC IC 0sd_c03 .I have installed the IC with data flow before and when i migrate from 3.5 to 7 . here for the datasource 2lis_13_vditm , the transfer rules are migrated successfully but here i am getting problem when i create transformation on update rule . The problem is with the routine net weight kg,gross weight kg and with the volume . here that infoobject has some routine in update rule and when i created the transformation , in that transformation there is no routine for that infoobject and also there is no mapping present for that infoobject . plz help me in solving this.
ThanxHi Ravi,
If you any start routine written on your Update rules or transformations, then when you open that one you will have Display start routine.
If you don't have any routines, then you will have create start routine which implies it doesn't contain any start routine.If you want you can create start routine by click on create start routine.
Creating routines is purely based on business requirement.
when we go for creating routines:
1)If you want to populate some new filed in target based on 2 or 3 fields from source.
2)If you want to delete some records based on certain condition
there are few more scenarios
please go through the below article
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/609eea32-455e-2c10-c08a-c23adf8c934e?quicklink=index&overridelayout=true
If it is enough of one to one mapping for you business, then no need to use any routines just do one to one mapping in transformation
Regards,
Venkatesh
Edited by: Venky1903 on Aug 19, 2011 12:30 AM -
Activated all datasources by mistake
Hi all,
I have the following problem - while I was trying to activate in RSA5 an FI data source, by mistake (I didn't click on the Select the Subtree +/- Button) I Activated ALL datasources (around 1046) which were added in a request.
In order to solve this I compared the Development with the Production, and deleted all the Data sources which were not in Production, and also deleted all the objects from the request.
Everything seemed ok. But, now that i did the replication of Data Sources from that system, in the BI system, I encounter the following problem: no data source has "arrived", other than the ones already existing, but for the ones already there, it has added a modified version (by me).(status changed from active to modified)
How can I undo this? It does not bother me, but the next time someone does a change here, problems may occur.
Please help!!!
Thank you so much,
ADHi
Use the program RSDS_DATASOURCE_ACTIVATE_ALL to activate the data sources.
now goto R3 system --> RSA6 check the data source which you want are active or not.
If not activate them and replicate them into BI system.
Regards,
Venkatesh -
Activation of datasource :Error modified version
Hi All , Change icon is greyed out is there any program that i can run to activate the real estate datasource. or what is the other way to fix it
1. i activated the datasource in rsa5
2. it comes in rsa6
3. then in bi 7.0 i replicate the datasource but it shows modified version and change and activate button is greyed out.
please help me asap since its a BMW first deliverable and all my datasoources are in modified version. Kindly help
thanks
Soniya KapoorHi, I've seen this problem before. I deleted the datasource in BW and then replicated again.
Regards
Dave -
Dear , please help me to solve my problem in activating my iPhone
Where I lost it since 3 months and when found it cannot activating my ID
Where give me (Your Apple ID has been disabled for security reasons. To enable your account, reset your password at applied.apple.com)
And try to reset my password but cannot please help me where am a poor man and cannot pay another money to solving this problem to any one
My iPhone data
Ime: ****
Model: A1332
FCC ID : BCG-E2380A
IC: 579C-E2380A
MY id at cloud ****
Password ( ****)
My country : Egypt
MY EMAIL : ****
Tell no: ****
<Personal Information Edited By Host>The following may help:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears - Apple Support
If you didn't receive your Apple ID verification or reset email - Apple Support -
Error while activating a datasource
Hi All,
We have created a generic datasource. While we are activating the datasource, its throwing up a message saying: "Error in database while accessing a table." And also "Generation of conversion exit and PSA update". Please advice.
Thanks & Regards,
SanjeevHi All,
There are issues still pending in our report design. Besides the above issue, we have also got another issue related to Absenteeism column.
Example:
The report needs to show the absenteeism column on a monthly basis. If an employee goes on a unscheduled leave for 10 days which are scattered in two months (Ex: he takes leave from 28th April till 7th May), then if the report is executed for April, for that Employee, it should show only 3 days, i.e. 28th, 29th & 30th. The remaining days have to be displayed in the Absenteeism column of May report, i.e 1st, 2nd...till 7th.
There is one record whenever an employee goes on an unscheduled Leave.
Emp ID From Date To Date No of Days
111 28/04/2011 07/05/2011 10
Hence this record has to be split into two, based on the no. of days the employee has gone on an unscheduled leave in both the months like below.
April
Emp ID From Date To Date No of Days
111 28/04/2011 30/04/2011 3
May
Emp ID From Date To Date No of Days
111 01/05/2011 07/05/2011 7
Any inputs are most welcome.
Regards,
Sanjeev. -
Error while activating the datasource during migration
Hi Guys,
When we were trying to migrate the datasources from 3.x to BI 7.0, we are encountering an error with the activation of the datasource. The datasource itself has been migrated but the ativation log gives and error
Error in activating the datasourc----RSO404
Has anyone encountered this issue? Your input is highly appreciated.
Regards,
DonivVoodi,
Thanks for the response but the note talks about deletion of the DTP causing the errors. Moreover we are already on SP 13. Any other ideas?
Doniv -
ERROR WHILE ACTIVATING THE DATASOURCE
Hi Experts,
I'M WORKING ON BW3.0B.I'M GETTING ERROR WHILE ACTIVATING THE DATASOURCE
1. EVENT WITH ERRORS EXTRACT IN DATA SOURC 2LIS_11_VAHDRHi,
where you are getting error in ECC?. or in BW?. If it is already in use, then you need to clear all Queues and then try to activate it.
Thanks
Reddy -
Problem while transporting generic datasource to test box
Hi Gurus,
I am trying to transport Generic datasource from SCM Dev to SCM Test box. Datasource is created with custom table in SCM.
It is throwing me RC8.
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
DataSource ZGATPUPLOAD does not exist in source system TA6CLNT010 of version A
Mapping between data source ZGATPUPLOAD and source system TA6CLNT010 is inconsistent
DataSource ZGATPUPLOAD does not exist in source system TA6CLNT010 of version A
Field /BIC/ZCSHIPTO will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field CALWEEK will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field FIXPEGQTY will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field LOC will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field MATNR will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field PROD_ALLOC_OBJEC will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field SALESORG will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field SALES_DIST will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field SIMID will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Field USER_MOD_QTY will not be delivered from DataSource ZGATPUPLOAD in source system TA6CLNT010
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
Reference to transfer structure ZGATPUPLOAD_CA not available. No activation possible.
Please give me suggestions....Are you still looking ans on it?
-
Gwtting error while activation of datasource
Hi
i am using demo version . while activating my datasource ( flat file and , r/3 datasources)
i am getting this error. please let me know this error will be system related or we can solve our self also
function module SDF/AL_MAP_TRANSID_LOGH DOENT NOT EXIST
please let me know solutionImplement note 1114719. Not sure though, whether this also fixes your other issues mentioned
-
Problem while activating message mapping
Hi all,
I am facing a problem while activating message mapping in IR.It says Object being edited by XXXX and cannot be activated.It's giving my user name itself and even it doesn't allow to go to edit mode even.But I am not opening it twice.How to monitor all the XI users logged into the XI system and find the users using IR and ID objects.Please help in this regard.
Thanks.Hi Jaya
It is .....
http://<host:port>/rep/support/public/LockAdminService
Hope this helps !!!
Regards,
J Augastine -
No active writeable datasource found for user creation, check your Persiste
HI SAP Guru's
Suddenly when I am login in Portal with J2EE_ADMIN or any user , I am getting error
You are not authorized to access this application; contact your system administrator
and when I am going to create user in identity management I am getting below error
Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration.".
I have searched all related treads in SDN but no success
Please help.
Thanks & Regards
Vinay PatelDear all,
I was searching the community because I had this same error and there was no answer of how it was fixed. So I'm sending how I fixed today in a customer environment.
1. Go to portal http://<portal>/webdynpro/dispatcher/sap.com/tcsecumewdumeadmin/UmeAdminApp
- select configuration
- folder "sap system based in abap"
- do the conection test
If the test fails, log on in client 001 and change user SAPJSF:
- assign role SAP_BC_JSF_COMMUNICATION (only this one) and one profile that has permission to RFC logon
- you can change the password too
STOP/START ABAP+JAVA
Go again to the portal above and test connection again. The tests should now be OK.
2. Go to portal http://<portal>/irj
- Log on with administrator user
Now you should be able to create an user. -
Regarding Activation of Datasource error
We have replicated datasource from R3 source system and while trying to activate it was posting error
of while activation of transfer structure with conversion exits., We are using 7.0 datasource only.
We checked at RSA3 of datasource and data is coming successfully., we tried with program transferstruc activate program
and rsds-datsource program but couldnt able to get rid of error.
Can you please help me to resolve the issue of what to be done for activation oferror while activation of datsource: Generation of conversion exits and PSA update...
Error when creating transfer structure /BIC/CCGNZP31_MM01_DS in source system Z370_110
Error when activating DataSource ZP31_MM01_DS Z370_110
These are the above errors mentioned while activating the datasource in 7.0.
Maybe you are looking for
-
Creating Support Desk message in Satellite System Priority & Trans.Type
Dear Colleagues, When we click on Help ->Create Support Message . Create Message screen appears, in this screen we can select the Priorities. I wanted to know where we define these priorities. Is it in Satellite System(R/3 ) or in Solution manager. A
-
Itunes opens with terms of agreement then closes in a flash
i click on iTunes and it comes up with the term of agreement and the i agree button but i dont get the chance to click any then it disappears. does anyone have any help for me please and thnx hp. pavilion f1703 Windows XP
-
Display the content of the folder
Hi all, I have written a recursive method to display the entire content of the particular folder. public void showDetails(String f) { try { x = new File(f); files = x.listFiles(); for (int i = 0;
-
HT2534 even though downloading apps is free y does it ask for payment details
Hey why do i need to enter the payment details although the app is free?? Even though the option none is available do i still need to enter my address?? I just tried downloading an app.. Please help..
-
Insert revenue object (Products dependency is that true)
Hi, while inserting Revenue Object in Opportunities POD, is it necessary to relate it with Product object ? Do we receive errors and exceptions when we try to insert the List of Revenue directly into CRM On Demand ? If so what is the exception and wh