Problem in adobe acrobat professional 7

Hi Friends,
Please help me. I am working in "windows 7 professional" 32bit. and also install abobe acrobat professional 7 in my system. i set the guides and unites line for in my pdfs. when i close the application the guides lines mesument is disapper. i will set every time when open my adobe application. its very manual work for me.
Please help !!!!!!!!!!!!!!!

With AA7, you will have to hunt for the work arounds to get it to work properly in Win7. Do expect some problems to occur that may not be able to be solved. Apparently you do not have a 64-bit version of Win7, or it probably would not work at all. A year or 2 back there was a lot of dicussion for AA8 users and Win7, with one or 2 mentioning they got it to work in the 64-bit version. I don't remember anyone else tryin AA7 on Win7, so you may be on your own -- basically because it is something none of us have tried. We may still be able to comment and give some thoughts, but probably not much more. You are likely to get a lot of the compatibility comments and that is appropriate, but does not help you.
What you might have to do is create a folder (If you can figure it out based on Win XP) and try to set that up for your data. Win7 stores system data in different folders (hopefully the registry is the same). That is not a lot of help, but is probably what the problem is. Systems have gone through a document and settings folder to a user folder, and so on. That may be the issue that Acrobat just can't find the folder to write the info into. Of course, it could be a registry issue also.

Similar Messages

  • Problems Installing Adobe Acrobat Professional

    Hi,
    I am new to Windows Vista 64. I am trying to install CS3. All of the programs will install except Adobe Acrobat Professional. I get the following error message:
    The file 'Adobe.PDF.dll' on Windows Vista CD-ROM is needed.
    Windows Vista was installed on the computer when I bought it so I don't have a CD. Any suggestions on what I need to do would be greatly appreciated.
    Thanks!
    devid sonia
    Financial expert
    22 ave, New York, NY
    http://hostelsintbilisi.com/

    Hi PrepetrolLtd,
    Acrobat XI is not recommended for windows Vista and that is the reason it wont show up in Adobe Application Manager.
    http://www.adobe.com/products/acrobatpro/tech-specs.html Please visit this link to check the tech specs for Acrobat Pro XI.
    Regards,
    Ajlan Huda.

  • Problems with Adobe Acrobat Professional 7.0

    I had a computer crash and had to re-install the Adobe 7.0 software which was an upgrade.   It took a call to tech support to get a code to install the upgrade again.  Whenever I open the software I get the following windows:
    FileOpen              The FileOpen Manager service is not running.  (clock ok) to contiinue
    FileOpen               The plug-in will not be loaded.  (click ok) to continue
    Adobe Acrobat        There was an error while loading the plug-in "FileOpen.api".  The plug-in failed to initialize.  (click ok) to continue. 
    By clicking ok to continue I finally get to Adobe and am able to continue.  I've updated the software but the problem continues.
    If anyone has a solution, please contact me at: [email address deleted host]. 
    Thanks,
    Tom 

    Yes, have upgraded to the most current version and am running Windows XP Pro with  service pack 3.
    Thanks for your reply.  Any other ideas?
    Tom
    310.475.4705:  House
    310.474.2710:  Office
    310.629.0193:  Cell
    [email protected]

  • I have tried to purchase Adobe Acrobat Professional XI this morning and payment (AED 1983.53) has been taken, I received a message stating there was/is a problem processing my order and that I should contact your customer service team in UAE.  Having trie

    I have tried to purchase Adobe Acrobat Professional XI this morning and payment (AED 1983.53) has been taken, I received a message stating there was/is a problem processing my order and that I should contact your customer service team in UAE.  Having tried this, I was met with a recorded message, in Arabic, and no options to speak to anyone.  I have found this process extremely frustrating and poor on your behalf.  Not providing any options to speak to an Adobe representative is equally annoying.  Please get back to me ASAP, as I need to use the product immediately.

    CS2 is very old and reached its "end of life" a while back.  So probably won't run on modern operating systems.  If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    Nancy O.

  • Adobe Acrobat Professional 8.0 giving problem

    We've a user who has installed Adobe Reader 7.0.8 and xACF on her machine. She also has Adobe Acrobat Professional 8.0 on her machine which she uses for some other work.
    Now the problem is that when she tries to open the Adobe interactive form from CRM system, it by default opens by Adobe Professional 8.0 (AND Professional 8.0 has issues with xACF framework, so she can not edit the form or click any button).
    I tried to attach "PDF" documents with Adobe Reader 7.0 on her machine - which works when I double click an existing PDF on her machine - it opens in Reader 7.0.
    But as soon as she opens the Interactive  form from CRM it opens in Adobe Professional 8.0.
    I even tried follwoing in Professional 8.0 -
    Edit -> Preferences -> Internet -> Display PDF in browser (Unchecked)
    But as soon as I did this the PDF stopped to display and just an icon appeared.
    Please let me know how I can resolve this issue of co-existence of Reader 7.0 and Professional 8.0 together on same machine.
    Many Thanks,
    Vimukta

    Hello Michal,
    I tried your solution 1. I un-installed both Reader 7.0.8 and Professional 8.0.
    Then I re-installed Reader 7.0.8.
    Then I re-installed Professional 8.0, but no where during installtion process did it ask me if Professional 8.0 should be default to open PDF files. By default it set it to open PDF files. Now I'm back to original problem.
    Solution 2 still works (i.e. open Reader 7.0.8) before opening the URL in web browser (then it opens in Reader 7.0.8).
    But we want a permanent solution.
    Please help.
    Thanks,
    Vimukta

  • Problem in creating PDF of Website using Adobe Acrobat Professional 8.

      I am trying to create PDF file of full website using "Create PDF from Web Page..." option, in Adobe Acrobat Professional 8.
    It is creating PDF but the page alignments/text/images alignments are lost and doesn't look good.
    Can any one help to create the PDF same as webpage look and feel.
    Thanks.

    Acrobat 8's HTML->PDF engine is quite old and doesn't work well with modern web pages. I'd recommend trying the same page using Acrobat X (trial available) where the engine has been replaced and modernized.

  • Adobe Acrobat Professional 8 Problem

    I installed CS3 on my MacBook about a month ago. When I try to view something using Adobe Acrobat Professional, it comes up but then it goes away and a box says I need to open up at least one more Adobe program for it to work. Even if I try opening Photoshop or Illustrator or something, it still won't work. Any help would be appreciated!

    Acrobat is not an Apple product. You should post your question on Adobe's forums:
    http://www.adobe.com/support/forums

  • Please Help!! Links to other PDF documents in my PDF document open in Adobe Acrobat Professional but NOT Adobe Reader XI

    Hi everyone,
    I really hope someone can help me with this problem. I work for a software company and we have a release coming up. Every release requires me to create a 'menu' which is what users see when they insert the release CD. I create this menu in Adobe Acrobat Professional, and add links to all the PDF manuals we have for our products. When I open the Menu in Acrobat Professional, all links open fine. When just attempting to open the links using the default Adobe Reader (which i'm guessing most of our customers will use), nothing happens, not even an error is generated. I'm ensuring I link to the documents that reside in the same folder on my directory as the menu. Is this something to do with relative/absolute links? Something to do with Reader XI, as I don't remember having this problem for our last release? Foxit also seems to work in opening the links.
    Thanks

    I’m using version 11.0.10. So where the Menu resides in a folder ready to be burnt on to a CD, that same folder is where the links point to.
    Thanks

  • There is a problem With Adobe Acrobat/Reader.

    I have XP professional, IE 8, and Adobe Reader 9.3.  When I try to open any pdf files from a web page I see the following error: "These is a problem With Adobe Acrobat/Reader. Please exit Adobe Acrobat/Reader and try again. "
    Although, the web pdf rendering returns an error, I'm able to open pdf files locally.
    Any assistance would be appreciated.
    Thanks,
    Mike

    I had similar problems with Windows XP SP3 and Adobe Reader 9.3 and I uninstalled AR 9.3 and went to:
    http://get.adobe.com/reader/otherversions/  and installed Adobe Reader 8.3.  No problems after that. However,
    ʇɐb ɹəuəllıʍ  posted this reply to one of my earlier posts. So, I don't know what to think...
    3. Feb 15, 2010 7:45 PM in response to: cbuzz1
    Re: Can you help me access PDF files via Adobe Reader?
    cbuzz1 wrote:
    I just discovered that Internet Explorer 8 is not supported by Adobe Reader 9.3 or that they just don't interface properly.
    Reader 9.3 works perfectly fine in IE8.

  • HT4356 Fillable pdf in Adobe Acrobat Professional X but when I try to use the Airprint feature the form print minus the field data, have anyone been able to resolve this issue?

    I have developed a fillable pdf in Adobe Acrobat Professional X but when I try to use the Airprint feature the form print minus the field data, have anyone been able to resolve this issue?

    Hi,
    I had a similar problem and found help for it. Go to the "Advanced" menu and select Extend features in Adobe Reader. That will enable rights which may resolve your problem. If that doesn't work, there is a really helpful guy in here, Robert Levine. You may want to ask him directly.
    Good Luck

  • Adobe Acrobat Professional 8.1.2, Locking toolbars

    In Adobe Acrobat Professional 8.1.2, how do I keep the Comment & Markup Toolbar from repopulating itself with the functions I've unchecked in the "More Tools" add/remove window? I've selected Lock Toolbars, however upon next reboot, they're back again. Thanks.

    Sorry, I don't know the answer but i am facing the same problem.
    As far as i know this error does not appear in Acrobat 9 but unfortunately i have only Version 8.
    Any help on this is highly appreciated!

  • Scanning in Adobe Acrobat Professional 8

    I have Windows XP - Adobe Acrobat Professional 8 - a Brother MFC-465CN printer scanner. When I want to create a .pdf from the scanner the Adobe program closes down. No error message. I can scan in other programs such as Photoshop etc.

    Hi Bob,Acrobat Professional 8 only support Twain-Compliant devices, while the HP printer only support Apple's ICA compliant application. As a reference you may find the following article from Adobe:Acrobat has ICA support on MAC 10.7 for now with Acrobat XI onlyhttps://helpx.adobe.com/acrobat/kb/troubleshoot-scanning-problems-acrobat-8.html You may scan using Image Capture or the HP Scan application, then open / import the scanned file into Adobe. You may find the Scanning specifications listed below, a Twain-compliant software interface only available for Windows:http://support.hp.com/us-en/product/HP-Deskjet-1050-All-in-One-Printer-series---J4/4027462/model/4027464/document/c02063036/ You may find any steps to scan with your printer in the following link:http://support.hp.com/us-en/product/HP-Deskjet-1050-All-in-One-Printer-series---J4/4027462/model/4027464/document/c03548786/ Regards,Shlomi 

  • Printing problem from Adobe Acrobat 8 and Reader 9

    Hello together,
    i've got a problem while printing from Adobe Acrobat Professional 8 and Acrobat Reader 9.
    I've got the Error: /usr/libexec/cups/filter/pstoraster failed
    It happens with my new Canon ip4700 and my brother laser printer.
    I got the newest available Version of OSX and the Adobe Updates.
    The PDF files are printed in the "OSX Preview", but not in the Adobe Software
    Happy for any help or advice.
    Best,
    Lukasz

    Acrobat 8 and Reader 9 are not compatible. The only versions of Reader and Acrobat designed to be compatible with each other in Windows is Reader and Acrobat X.

  • Adobe Acrobat Professional X - shows blank dialog boxes with vertical bars

    The file and print screen and the file and properties screen both show mainly blank screens with vertical bars only on them, no text at all.
    Looking around the forum I found it may be a font problem.  Is there a way to know which font or if that is actually the problem and how do you resolve that?
    This is on a Windows 7 - 64bit system with Adobe Acrobat Professional X (10.1.12) installed.
    Thank you.

    Hi brian!
    Please see Re: Blank dialog boxes in Acrobat X Pro
    Let us know if that does the trick!
    Best,
    Sara

  • SERIOUS ADOBE ACROBAT PROFESSIONAL 8 ERROR

    Hi
    I am using (or TRYING to use!) Adobe Acrobat Professional 8.
    But every time it loads up I receive the following pop-up message:
    "A serious error has been detected and Adobe Acrobat 8 Professional cannot continue. Please re-install the application and try again."
    I click OK, and then another message appears:
    "Acrobat.exe - Application Error
    The instruction at "0x05bf1243" referenced memory at "0x12284e88". The memory could not be "written".
    Click on OK to terminate the program"
    I have tried uninstalling and re-installing but the error comes back!
    What can I do?? Can ANYONE help?!!

    I've been watching this thread hoping to find an answer to nearly the same issue... "Acrobat Cannot Continue At This Time Until You Open Photoshop" (?)
    It doesn't matter which application I open... Acrobat is worhtless and closes in roughly 5 seconds. Hard to believe Adobe's been unable to duplicate this in-house? Now I'm afraid to uninstall it and reinstall ver. 7. I already had to FORMAT my Vista install and deal with Microsoft requiring personal information before allowing me to authorize my copy of Vista Ultimate a second time, just to get Photoshop CS3 installed on my PC following the beta fiasco.
    And to think I installed Vista in the first place because I wanted to be able to use Bridge 2.0....
    Jeff, why couldn't there have been a list of files and registry entries to be removed posted? Some sort of procedure to help out those of us that didn't install the Photoshop beta to the default drive or directory? The WinClean tool did NOT work for me, (or several others I'm aware of).
    As it looks, the same thing is happening now with Acrobat 8. Those of us with problems are out of luck after spending a lot of money on a productivity suite of tools. After all the problems I had with getting Photoshop CS3 on my computer from Creative Suite, I installed it from a stand-alone version before installing the rest of the suite to gain use of Dreamweaver, etc., (which ALSO crashes my entire system every 2nd or 3rd time I use it!).
    I don't mean to be ragging on it, but I am a bit confused after using Adobe products for as long as they've been around...
    Thanks.

Maybe you are looking for

  • HTML DB 10g installation problem on linux HTTP-503 ORA-604

    I have a problem after the installation of HTML DB from the linux 10g R2 companion image. I installed HTML DB and HTTP server in one go, on an new system that only has the default orcl database installed. I run Red Hat enterprise linux on a x86_64 sy

  • RH8 browse sequence based on TOC not working as expected

    I have several standalone projects for which RoboHelp's browse sequence tool correctly generates the browse sequence based on the TOC using a book level of 0 (zero) so that it picks up everything in order.  If a project has books A and B (which are n

  • Just learning - issue with switching images

    I have two photos that are fairly identical. The same four people in both images. In one image, one party has eyes shut, in the other image, eyes open but one of the other folks has turned their head. I can't find the tutorial (video preferred) as to

  • Case Management - Table to find out relation between Case and Activity

    Hi. I do search the SDN for the same quesiton, I found one but it was not answered by a single person. So let me ask it again: I am working on an interface in CRM that will create the activity and link it to the open case. I can get the existing case

  • AccessControlException: access denied !Again!

    Hi all, I hava an applet which is signed. I want it to be a way to check filesize. I enter the path of the file in value attribute of <param> tag. In my class when I do: boolean oki=false;     public void init(){oki=new File(getParameter("path")).exi