Problem in alv interactive.

Hi ,
While creating ALV interactive report iam getting second list but iam unable to get the records in that list.
I am unable to find out the reason for this. can anybody help me regarding this.............
Thanks&Regards,
raji.

Hello Raji
Assuming that your interactive ALV list is OO-based you may have a look at sample report ZUS_SDN_TWO_ALV_GRIDS in thread
alv
Regards
Uwe

Similar Messages

Problem in ALV report

Hi Friends,
I have the following 2 problems in ALV report
1) Logo is not getting displayed in the report.
2) When i click on the Purchase order number in the report the interactive report is not working,i am not able to see report of First interactive level.
can you help it out friends.
Thanks and regards
Dinesh
REPORT YSDBALV1
tables: ekko , ekpo .
type-pools: slis .
Table for Display Header
data:i_header type slis_t_listheader with header line.
*Fieldcat Declaration
data:fieldcatalog type slis_T_fieldcat_alv WITH HEADER LINE.
*Table of Events
data:i_event type slis_t_event with header line .
For Layout
data:i_layout type slis_layout_alv .
data: text(30) .
*Internal Table Declaration
data: begin of it_final occurs 0 ,
      ebeln like ekko-ebeln ,           "Purchasing Document No.
      bedat like ekko-bedat ,           "Purchasing Document Date
      matnr like ekpo-matnr ,           "Material No.
      netwr like ekpo-netwr ,         "Net Order Value in PO Currancy
      meins like ekpo-meins ,           "UOM
      chk(1) ,
      light(1) ,
      change like ekpo-menge ,
      end of it_final .
**select option Declaration
selection-screen begin of block block.
select-options: s_ebeln for ekko-ebeln .
selection-screen end of block block .
selection-screen begin of block block1 .
parameters:grid radiobutton group r .
parameters:list radiobutton group r .
selection-screen end of block block1 .
at selection screen
at selection-screen .
select single * from ekko where ebeln in s_ebeln .
if sy-subrc <> 0 .
   message e000(8I) WITH 'No Data Exists' .
endif .
start-of-selection .
if grid = 'X' .
perform get_data .
perform event using i_event[] .
perform field using fieldcatalog[] .
perform layout using i_layout .
perform grid_display .
endif .
*&      Form get_data
      text
--> p1        text
<-- p2        text
form get_data .
*DATA Retrieval from tables
SELECT EKKO~EBELN
       EKKO~BEDAT
       EKPO~EBELP
       EKPO~MATNR
       EKPO~NETWR
       EKPO~MEINS
       EKPO~MENGE
       EKPO~BPRME
       INTO CORRESPONDING FIELDS OF table IT_FINAL
       FROM EKKO INNER JOIN EKPO ON EKKOEBELN = EKPOEBELN
       WHERE EKKO~EBELN IN S_EBELN.
       APPEND IT_FINAL.
endform.                    " get_data
*Getting the Event for Top of Page display.
*&      Form event
      text
     -->P_I_event[] text
form event using    p_i_event type slis_t_event.
clear p_i_event .
refresh p_i_event .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
   I_LIST_TYPE           = 0
   IMPORTING
     ET_EVENTS             = p_i_event
EXCEPTIONS
   LIST_TYPE_WRONG       = 1
   OTHERS                = 2
read table p_i_event with key name = slis_ev_top_of_page into i_event.
      if sy-subrc = 0.
             move 'TOP_OF_PAGE_PO' to i_event-form.
             modify p_i_event from i_event index sy-tabix transporting form.
      endif.
      clear i_event.
endform.                    " event
*Display Top-of Page Details and Logo
form top_of_page_po .
       clear i_header .
       refresh i_header .
       write sy-datum to text.
       i_header-typ = 'H'.
       i_header-info = 'PURCHASE OREDER DETAILS'.
       append i_header.
      *Logo Display
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
             EXPORTING
                 it_list_commentary       = i_header[]
                 I_LOGO                   = 'ENJOYSAPLOGO'.
endform .
*Field Catalog Append
*&      Form field
      text
     -->P_fieldCATALOG[] text
form field using p_fieldcatalog type slis_t_fieldcat_alv.
     clear fieldcatalog.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order No'.
      fieldcatalog-col_pos     = 1.
      append fieldcatalog .
      clear fieldcatalog.
      fieldcatalog-fieldname   = 'BEDAT'.
      fieldcatalog-seltext_m   = 'PO Date'.
      fieldcatalog-col_pos     = 2.
      append fieldcatalog .
      clear fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material No'.
      fieldcatalog-col_pos     = 4.
      fieldcatalog-outputlen   = 20.
      append fieldcatalog .
      clear fieldcatalog.
      fieldcatalog-fieldname   = 'NETWR'.
      fieldcatalog-seltext_m   = 'Net Value '.
      fieldcatalog-col_pos     = 5.
      fieldcatalog-outputlen   = 20.
      fieldcatalog-do_sum = 'X'.
      append fieldcatalog .
      clear fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Units'.
      fieldcatalog-col_pos     = 6.
      fieldcatalog-outputlen   = 4.
      append fieldcatalog .
      clear fieldcatalog.
endform.                    " field
*&      Form layout
      text
form layout using    p_i_layout TYPE SLIS_LAYOUT_ALV .
i_layout-zebra = 'X'.
    i_layout-lights_fieldname = 'LIGHT'.
    i_layout-lights_tabname = 'IT_FINAL'.
    i_layout-box_fieldname = 'CHK'.
    i_layout-box_tabname = 'IT_FINAL'.
    i_layout-edit = ' '.
endform.
*To display Buttons in the MENU BAR if needed
FORM SET_PO_PF_STATUS USING P_I_EXTAB TYPE
                 SLIS_T_EXTAB.
                 SET PF-STATUS 'MENUPO'.
ENDFORM.
*Event for Interactive display of ALV report
form USER_COMMAND using r_ucomm like sy-ucomm
                         rs_selfield type slis_selfield .
if r_ucomm = '&IC1'.
READ TABLE IT_FINAL index   rs_selfield-tabindex.
write:/ IT_FINAL-ebeln.
endif.
endform .
*Parameters of FM REUSE_ALV_GRID_DISPLAY
*&      Form grid_display
      text
--> p1        text
<-- p2        text
form grid_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM                = SY-REPID
   I_CALLBACK_PF_STATUS_SET          = 'SET_PO_PF_STATUS'
    I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
    IS_LAYOUT                         = I_LAYOUT
    IT_FIELDCAT                       = FIELDCATALOG[]
    IT_EVENTS                         = I_EVENT[]
TABLES
    t_outtab                          = IT_FINAL.
endform.                    " grid_display

*& Report YSDBALV1
REPORT YSDBALV1.
tables: ekko , ekpo .
type-pools: slis .
Table for Display Header
data:i_header type slis_t_listheader with header line.
*Fieldcat Declaration
data:fieldcatalog type slis_T_fieldcat_alv WITH HEADER LINE.
*Table of Events
data:i_event type slis_t_event with header line ,
     wa_event type line of slis_t_event.
For Layout
data:i_layout type slis_layout_alv .
data: text(30) .
*Internal Table Declaration
data: begin of it_final occurs 0 ,
ebeln like ekko-ebeln , "Purchasing Document No.
bedat like ekko-bedat , "Purchasing Document Date
matnr like ekpo-matnr , "Material No.
netwr like ekpo-netwr , "Net Order Value in PO Currancy
meins like ekpo-meins , "UOM
chk(1) ,
light(1) ,
change like ekpo-menge ,
end of it_final .
**select option Declaration
selection-screen begin of block block.
select-options: s_ebeln for ekko-ebeln .
selection-screen end of block block .
selection-screen begin of block block1 .
parameters:grid radiobutton group r .
parameters:list radiobutton group r .
selection-screen end of block block1 .
at selection screen
at selection-screen .
select single * from ekko where ebeln in s_ebeln .
if sy-subrc <> 0 .
message e000(8I) WITH 'No Data Exists' .
endif .
start-of-selection .
if grid = 'X' .
perform get_data .
perform event using i_event[] .
perform field using fieldcatalog[] .
perform layout using i_layout .
perform grid_display .
endif .
*& Form get_data
text
--> p1 text
<-- p2 text
form get_data .
*DATA Retrieval from tables
SELECT EKKO~EBELN
EKKO~BEDAT
EKPO~EBELP
EKPO~MATNR
EKPO~NETWR
EKPO~MEINS
EKPO~MENGE
EKPO~BPRME
INTO CORRESPONDING FIELDS OF table IT_FINAL
FROM EKKO INNER JOIN EKPO ON EKKOEBELN = EKPOEBELN
WHERE EKKO~EBELN IN S_EBELN.
APPEND IT_FINAL.
endform. " get_data
*Getting the Event for Top of Page display.
*& Form event
text
-->P_I_event[] text
form event using p_i_event type slis_t_event.
clear p_i_event .
refresh p_i_event .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = p_i_event.
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
read table p_i_event with key name = slis_ev_top_of_page into wa_event.
if sy-subrc = 0.
move 'TOP_OF_PAGE_PO' to i_event-form.
modify p_i_event from i_event index sy-tabix transporting form.
endif.
clear i_event.
endform. " event
*Display Top-of Page Details and Logo
form top_of_page_po .
clear i_header .
refresh i_header .
write sy-datum to text.
i_header-typ = 'H'.
i_header-info = 'PURCHASE OREDER DETAILS'.
append i_header.
*Logo Display
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_header[]
I_LOGO = 'ENJOYSAP_LOGO'.
endform .
*Field Catalog Append
*& Form field
text
-->P_fieldCATALOG[] text
form field using p_fieldcatalog type slis_t_fieldcat_alv.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order No'.
fieldcatalog-col_pos = 1.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'BEDAT'.
fieldcatalog-seltext_m = 'PO Date'.
fieldcatalog-col_pos = 2.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material No'.
fieldcatalog-col_pos = 4.
fieldcatalog-outputlen = 20.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'NETWR'.
fieldcatalog-seltext_m = 'Net Value '.
fieldcatalog-col_pos = 5.
fieldcatalog-outputlen = 20.
fieldcatalog-do_sum = 'X'.
append fieldcatalog .
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Units'.
fieldcatalog-col_pos = 6.
fieldcatalog-outputlen = 4.
append fieldcatalog .
clear fieldcatalog.
endform. " field
*& Form layout
text
form layout using p_i_layout TYPE SLIS_LAYOUT_ALV .
i_layout-zebra = 'X'.
i_layout-lights_fieldname = 'LIGHT'.
i_layout-lights_tabname = 'IT_FINAL'.
i_layout-box_fieldname = 'CHK'.
i_layout-box_tabname = 'IT_FINAL'.
i_layout-edit = ' '.
endform.
*To display Buttons in the MENU BAR if needed
FORM SET_PO_PF_STATUS USING P_I_EXTAB TYPE
SLIS_T_EXTAB.
SET PF-STATUS 'MENUPO'.
ENDFORM.
*Event for Interactive display of ALV report
form USER_COMMAND using r_ucomm like sy-ucomm
rs_selfield type slis_selfield .
if r_ucomm = '&IC1'.
READ TABLE IT_FINAL index rs_selfield-tabindex.
set parameter id 'VL1' field it_final-ebeln.
call transaction 'ME23N'.
endif.
endform .
*Parameters of FM REUSE_ALV_GRID_DISPLAY
*& Form grid_display
text
--> p1 text
<-- p2 text
form grid_display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PO_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = FIELDCATALOG[]
IT_EVENTS = I_EVENT[]
TABLES
t_outtab = IT_FINAL.
endform. " grid_display
Regards,
Rusidar S.

ALV Interactive

Hi,
1)In ALV, how many secondary lists we can have and how ?
2) In upgradation project (for example from 4.6c to Mysap ECC 6.0 version), what are the tools we use to find the object/objects to be upgrated?
thnaks in advance
Jana

hi,
ex: alv interactive.
ZSR_ALV_INTERACTIVE.
TABLES : LFA1,EKKO,EKPO.
SELECT-OPTIONS : VENDOR FOR LFA1-LIFNR.
DATA : BEGIN OF ITAB OCCURS 0,
       LIFNR LIKE LFA1-LIFNR,
       NAME1 LIKE LFA1-NAME1,
       END OF ITAB.
DATA : BEGIN OF JTAB OCCURS 0,
       EBELN LIKE EKKO-EBELN,
       AEDAT LIKE EKKO-AEDAT,
       END OF JTAB.
DATA : BEGIN OF KTAB OCCURS 0,
       EBELP LIKE EKPO-EBELP,
       MATNR LIKE EKPO-MATNR,
       END OF KTAB.
TYPE-POOLS : SLIS.
DATA : REPID LIKE SY-REPID.
DATA :LFA1_B TYPE SLIS_T_FIELDCAT_ALV,
      LFA1_W TYPE SLIS_FIELDCAT_ALV,
      EKKO_B TYPE SLIS_T_FIELDCAT_ALV,
      EKKO_W TYPE SLIS_FIELDCAT_ALV,
      EKPO_B TYPE SLIS_T_FIELDCAT_ALV,
      EKPO_W TYPE SLIS_FIELDCAT_ALV,
      EVENTS_B TYPE SLIS_T_EVENT,
      EVENTS_W TYPE SLIS_ALV_EVENT.
PERFORM GET_VAL.
REPID = SY-REPID.
SELECT LIFNR NAME1 FROM LFA1 INTO TABLE ITAB WHERE LIFNR IN VENDOR.
*perform val USING USER_COMMAND sel.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM = REPID
    IT_FIELDCAT        = LFA1_B
    IT_EVENTS          = EVENTS_B
TABLES
    T_OUTTAB           = ITAB.
*&      Form GET_VAL
      text this is to put column headings
FORM GET_VAL.
LFA1_W-FIELDNAME = 'LIFNR'.
LFA1_W-REF_TABNAME = 'LFA1'.
LFA1_W-REF_FIELDNAME = 'LIFNR'.
APPEND LFA1_W TO LFA1_B.
LFA1_W-FIELDNAME = 'NAME1'.
LFA1_W-REF_TABNAME = 'LFA1'.
LFA1_W-REF_FIELDNAME = 'NAME1'.
APPEND LFA1_W TO LFA1_B.
EKKO_W-FIELDNAME = 'EBELN'.
EKKO_W-REF_TABNAME = 'EKKO'.
EKKO_W-REF_FIELDNAME = 'EBELN'.
APPEND EKKO_W TO EKKO_B.
EKKO_W-FIELDNAME = 'AEDAT'.
EKKO_W-REF_TABNAME = 'EKKO'.
EKKO_W-REF_FIELDNAME = 'AEDAT'.
APPEND EKKO_W TO EKKO_B.
EKPO_W-FIELDNAME = 'EBELP'.
EKPO_W-REF_TABNAME = 'EKPO'.
EKPO_W-REF_FIELDNAME = 'EBELP'.
APPEND EKPO_W TO EKPO_B.
EKPO_W-FIELDNAME = 'MATNR'.
EKPO_W-REF_TABNAME = 'EKPO'.
EKPO_W-REF_FIELDNAME = 'MATNR'.
APPEND EKPO_W TO EKPO_B.
EVENTS_W-NAME = 'USER_COMMAND'.
EVENTS_W-FORM = 'VAL'.
APPEND EVENTS_W TO EVENTS_B.
ENDFORM.                    "GET_VAL
*&      Form VAL
      text
     -->USER_COMMANtext
     -->SEL        text     for retrieving data
FORM VAL USING USER_COMMAND LIKE SY-UCOMM SEL TYPE SLIS_SELFIELD.
DATA : VEN(10) TYPE N,
         PO(10) TYPE N.
DATA : MAT(10) TYPE C.
IF SEL-FIELDNAME = 'LIFNR'.
    VEN = SEL-VALUE.
    SELECT EBELN AEDAT FROM EKKO INTO TABLE JTAB WHERE LIFNR = VEN.
   CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM             = REPID
     I_STRUCTURE_NAME               = EKKO_B
      IT_FIELDCAT                    = EKKO_B
      IT_EVENTS                      = EVENTS_B
     TABLES
       T_OUTTAB                       = JTAB.
ENDIF.
IF SEL-FIELDNAME = 'EBELN'.
    PO = SEL-VALUE.
    SELECT EBELP MATNR FROM EKPO INTO TABLE KTAB WHERE EBELN = PO.
    CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
      EXPORTING
        I_TITLE            = 'ITEM DETAILS'
        I_TABNAME          = 'EKPO'
        IT_FIELDCAT        = EKPO_B
        I_CALLBACK_PROGRAM = REPID
      IMPORTING
        ES_SELFIELD        = SEL
      TABLES
        T_OUTTAB           = KTAB.
ENDIF.
logic to select a record
IF SEL-FIELDNAME = 'MATNR'.
    MAT = SEL-VALUE.
    SET PARAMETER ID 'MAT' FIELD MAT.
    CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
ENDIF.
ENDFORM.                    "VAL
You have to aware of all related program like BDC's , Screens related errors and all dictionary related problems.
Some function modules may become obsolete, and some screens will change
abnd some new fields will be added in the new versions etc.
Also take care of SPAU and SPDD tcodes.
You should be able to know about Unicode concept in sap.
Upgrading within a new version of SAP R/3 :
The upgrade process for the SAP R/3 application does not modify any of the adapter's ABAP development, but it may modify the SAP R/3 application so that some of the adapter's ABAP development does not work properly.
This section describes how to upgrade the adapter's ABAP development in an upgraded SAP R/3 application. Before you can upgrade the adapter, you must have already upgraded your SAP R/3 application.
To upgrade the adapter's ABAP development:
Install the latest ABAP Extension Module transport files for the correct version of the SAP R/3 application.
You must install the correct version-specific transport files. For details on installing these transport files, see Connector transport file installation.
Compile all programs and resolve syntax errors associated with the ABAP development.
The easiest way to find syntax errors is to generate each function group associated with each object and fix the errors one at time. Repeat this process until all function groups compile successfully. Be sure to generate any other programs such as triggering programs that are not associated with a function group. Be aware that minor updates may need to be made to your ABAP triggering programs after applying the required new transports to upgrade the adapter.
If you are upgrading to SAP R/3 version 4.x, note that the 4.x ABAP handlers use the product namespace /CWLD/. For special considerations for upgrading to the connector supporting SAP R/3 version 4.x, see Connector for SAP R/3.
Test the new environment and make modifications as needed.
Only a full system test enables you to work out any problems with the upgrade. Test your event detection mechanisms by running the appropriate transaction or program and sending business objects to the SAP system. Use the connector's log within the SAP system to help identify other issues.
chk this
http://www.thespot4sap.com/upgrade_guide_v2.pdf#search=%22upGRADE%20STEPS%20-%20SAP%22
also chk these 2 notes in service.sap.com
Technical Upgrade is only a version upgrade without any functionality changes.
The objects that are needed to be upgraded are:
Includes
Function Groups / Function Modules
Programs / Reports
OSS Notes
SAP Repository Objects
SAP Data Dictionary Objects
Domains, Data Elements
Tables, Structures and Views
Module Pools, Sub Routine pools
BDC Programs
Print Programs
SAP Scripts, Screens
User Exits
You can refer to the below links for more information on technical upgrade:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/07/upgradeFROMR3TOmySAPERP-PARTII&
https://wiki.sdn.sap.com/wiki/display/profile/UPGRADEFROMR3TOmySAPERP-PARTIII
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/2e/6d66647d9011d396b60000e82de14a/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5ac31178-0701-0010-469a-b4d7fa2721ca
Refer to these related threads
Re: Role of ABAP Developer in Upgrade Projects
ABAP developer part in an upgrade project

I have a problem with ALV Grid User Command?

Hi Experts,
I have a problem with ALV GRID User Command.
I am calling TCODE IW33 (Order Display) from the ALV output at first time by selecting an order. But, User command is calling IW33 Initial screen with blank value of order. Even I checked in debugging the value what I selected is passing properly, but once that screen (IW33 Initial) displays, value doesn't appear. Then, Manually, I created another session and gone to TCODE IW33 and displayed an order. After that I came out from that order. Then again run my ALV program and selected another order, now order is displaying, but not what I selected current order instead of displaying previous order what I just displayed manually. If I selected any other order, system will display the same order what I dislayed manually.
Here is my code.
FORM user_command_alv USING u_ucomm TYPE sy-ucomm
                       us_self_field TYPE slis_selfield.
CASE u_ucomm.
WHEN '&IC1'.
READ TABLE it_final INDEX us_self_field-tabindex INTO wa_final.
        WHEN 'ORDER'.
          IF NOT wa_final-order IS INITIAL.
            SET PARAMETER ID 'COK' FIELD wa_final-order.
            CALL TRANSACTION 'IW33' AND SKIP FIRST SCREEN.
          ENDIF.
endform.
PARAMETER ID 'COK' also the standard one.
Could you please help me out, Where I did wrong?
If I select any order, that order only should display.
Thanks in advance.
Regards,
Sarayu.
Code Formatted by: Alvaro Tejada Galindo on Jan 8, 2009 2:33 PM

hi,
Please check it once the Paramater ID is 'ANR' for IW33 order number.
Hope this may help.
Regards,
Sravanthi

Problem with ALV grid in edit mode

Hello, gurus!
I have a problem with ALV-grid. Sometimes when I call F4 help for a cell, data is inserted in a different cell. And when I call check_changed_data method, my internal table (passed to ALV-control in set_table_for_first_display) does not updates properly. In what can be a problem?
Thanks,
Mikhail

Hi Prabhu,
MODULE pbo_100 OUTPUT.
SET PF-STATUS 'MAIN100'.
title_of_report = text-010.
SET TITLEBAR '0100' WITH title_of_report.
DATA: g_event_receiver TYPE REF TO lcl_event_handler.
IF z_custom_container IS INITIAL .
    CREATE OBJECT z_custom_container
      EXPORTING
        container_name = 'ALV_ZAC'.
    CREATE OBJECT alv_grid
      EXPORTING
        i_parent = z_custom_container.
    g_repid = sy-repid.
    gs_variant-report = g_repid.
    x_save = 'A'.
    PERFORM check_alv_grid_fields.
    ps_layout-cwidth_opt = 'X'.
    ps_layout-edit = 'X'.
    CALL METHOD alv_grid->set_ready_for_input
      EXPORTING
        i_ready_for_input = '1'.
*    CALL METHOD alv_grid->register_edit_event
*      EXPORTING
*        i_event_id = cl_gui_alv_grid=>mc_evt_enter.
    APPEND   s_list_rec   to it_list_rec.
    CALL METHOD alv_grid->set_table_for_first_display
      EXPORTING
        is_layout       = ps_layout
        is_variant      = gs_variant
        i_save          = x_save
      CHANGING
        it_fieldcatalog = pt_fieldcat
        it_outtab       = it_list_rec[].
    CALL METHOD alv_grid->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_enter.
    CALL METHOD alv_grid->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_modified.
ENDIF.
FORM check_alv_grid_fields .
DATA: ls_fcat LIKE LINE OF pt_fieldcat.
REFRESH pt_fieldcat .
CLEAR: ps_layout, ls_fcat.
ls_fcat-fieldname = 'VBELN'.
ls_fcat-ref_field = 'VBELN'. ls_fcat-ref_table = 'LIPS'. " .
ls_fcat-outputlen = 9.
* ls_fcat-datatype   = 'CHAR'.
* ls_fcat-inttype    = 'C'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR: ls_fcat.
ls_fcat-fieldname = 'ERDAT'.
ls_fcat-ref_field = 'ERDAT'. ls_fcat-ref_table = 'LIPS'.
ls_fcat-outputlen = 9.
* ls_fcat-f4availabl = 'X' .
* ls_fcat-datatype   = 'DATS'.
* ls_fcat-inttype    = 'D'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR: ls_fcat.
ENDFORM.                    " check_alv_grid_fields
FORM save_p .
CLEAR l_valid.
CALL METHOD alv_grid->check_changed_data
    IMPORTING
      e_valid = l_valid.
IF l_valid IS INITIAL.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        titel = text-i01
        txt1 = text-i02
        txt2 = text-i03
        txt3 = text-i04.
ELSE.
    i_dat_reg = zrumm_prr-cdprr.
    CLEAR is_temp_otc.
    freshit i_prrpus_fax.
    freshit i_list2_ot.
    LOOP AT it_list_rec INTO s_list_rec.
      MOVE-CORRESPONDING s_list_rec TO i_list2_ot.
      i_list2_ot-fgrup = 'RECE'.
      i_list2_ot-prrnu = i_num_prr.
      APPEND i_list2_ot.
      MOVE-CORRESPONDING s_list_rec TO i_prrpus_fax.
      APPEND i_prrpus_fax.
    ENDLOOP.
ENDIF.
Edited by: Mikhail Sarychev on Mar 16, 2011 6:41 AM
Edited by: Mikhail Sarychev on Mar 16, 2011 6:49 AM
Edited by: Mikhail Sarychev on Mar 16, 2011 6:49 AM

Background task problem with alv grid display

Hello !
I have a problem when executing my program in background.
In foreground I have no problem, my ALV appears. In the background I have a dump.
The current ABAP program "SAPLKKBL" had to be terminated because one of the statements could not be executed.
I use the function module 'REUSE_ALV_GRID_DISPLAY'
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     EXPORTING
        i_callback_program      = gd_repid
        i_callback_user_command = 'F533_USER_COMMAND'
        is_layout               = gd_layout
        it_fieldcat             = fieldcatalog[]
        it_special_groups       = i_fgroup[]
        i_save                  = 'X'
        it_sort                 = gd_sort
        i_buffer_active         = ' '
        i_callback_pf_status_set = 'F534_SET_PF_STATUS'
     TABLES
        t_outtab                = mytab
     EXCEPTIONS
        program_error           = 1
        OTHERS                  = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
I don't understand where the problem is. Please help me.
Thank you.

I love replying to old threads:
Try this link
http://scn.sap.com/people/prashant.patil12/blog/2007/02/20/displaying-alv-grid-in-background-job

Alv interactive report for secondary list

Hi All,
This is my code for ALV interactive report. Its working Properly for me when i select material number iam able to display the secondary list properly . if i sorted the basic list other than material number for ex . created date . iam uable to display correct secondary list . Can any one help me in this issue?
REPORT ZWRLOMDMM_PMG_PHWEB_PLD   NO STANDARD PAGE HEADING
        LINE-SIZE 120
        LINE-COUNT 65
        MESSAGE-ID 00.
TABLES                                                              *
TABLES: MARA ,      "General Material Data
        ZWPBPH.     " Published Product Hierarchy
TYPE-POOLS                                                          *
TYPE-POOLS:SLIS .
DATA:FIELDCATALOG_BASIC TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
     FIELDCATALOG_SECONDARY TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
     GD_TAB_GROUP TYPE SLIS_T_SP_GROUP_ALV,
     GD_LAYOUT TYPE SLIS_LAYOUT_ALV,
     GD_REPID LIKE SY-REPID.
INTERNAL TABLES                                                     *
*Internal Tables to Get Data.
*Internal Table For MARA Table.
DATA:BEGIN OF T_MARA OCCURS 0 ,
        MATNR LIKE MARA-MATNR,
        MTART LIKE MARA-MTART,
        ERSDA LIKE MARA-ERSDA,
        ERNAM LIKE MARA-ERNAM,
        AENAM LIKE MARA-AENAM,
        SPART LIKE MARA-SPART,
     END OF T_MARA.
*Internal Table For ZWPBPH Table.
DATA:BEGIN OF T_ZWPBPH OCCURS 0 ,
       PBPINO LIKE ZWPBPH-PBPINO,
       PBPAPINO LIKE ZWPBPH-PBPAPINO,
     END OF T_ZWPBPH.
*Internal Table For Basic List Field Catalog.
DATA:BEGIN OF T_ALV OCCURS 0 ,
       MATNR LIKE MARA-MATNR,
       MTART LIKE MARA-MTART,
       ERSDA LIKE MARA-ERSDA,
       ERNAM LIKE MARA-ERNAM,
       SPART LIKE MARA-SPART,
       SPART1(3),
     END OF T_ALV.
*Internal Table For Secondary List Field Catalog.
DATA: BEGIN OF T_ALVS OCCURS 0 ,
        MATNR LIKE MARA-MATNR,
        AENAM LIKE MARA-AENAM,
        LAEDA LIKE MARA-LAEDA,
      END OF T_ALVS.
*Internal Table For Model
DATA:T_MODEL LIKE T_ZWPBPH OCCURS 0 WITH HEADER LINE.
*Internal Table For Product
DATA:T_PRODUCT LIKE T_ZWPBPH OCCURS 0 WITH HEADER LINE.
*Internal Table For Family
DATA:T_FAMILY LIKE T_ZWPBPH OCCURS 0 WITH HEADER LINE.
*Internal Table For Line
DATA:T_LINE LIKE T_ZWPBPH OCCURS 0 WITH HEADER LINE.
*Internal Table For Type
DATA:T_TYPE LIKE T_ZWPBPH OCCURS 0 WITH HEADER LINE.
SELECTION SCREEN                                                    *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: P_MATN RADIOBUTTON GROUP R1 USER-COMMAND run default 'X'.
SELECT-OPTIONS: P_MATNR FOR MARA-MATNR MODIF ID SC1 .
PARAMETERS: P_DAT RADIOBUTTON GROUP R1 .
SELECT-OPTIONS: : P_DATE FOR MARA-LAEDA MODIF ID SC2.
PARAMETERS: P_DIV RADIOBUTTON GROUP R1 .
SELECT-OPTIONS: : P_DIVIS for mara-spart MODIF ID SC3.
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION                                                      *
INITIALIZATION.
REFRESH: T_MARA,
           T_ZWPBPH,
           T_ALV,
           T_ALVS,
           T_MODEL,
           T_PRODUCT,
           T_FAMILY,
           T_LINE,
           T_TYPE.
CLEAR:   T_MARA,
           T_ZWPBPH,
           T_ALV,
           T_ALVS,
           T_MODEL,
           T_PRODUCT,
           T_FAMILY,
           T_LINE,
           T_TYPE.
GD_REPID = SY-REPID.
*AT SELECTION-SCREEN OUTPUT.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF P_MATN = 'X'.
      FREE : P_DIVIS,P_DATE.
      IF SCREEN-GROUP1 = 'SC2' or SCREEN-GROUP1 = 'SC3'.
        SCREEN-INPUT = 0.
        MODIFY SCREEN.
        CONTINUE.
      ENDIF .
    ENDIF.
    IF P_DAT = 'X'.
      FREE : P_MATNR,P_DIVIS.
      IF SCREEN-GROUP1 = 'SC1' or SCREEN-GROUP1 = 'SC3'.
        SCREEN-INPUT = 0.
        MODIFY SCREEN.
        CONTINUE.
      ENDIF .
    ENDIF.
    IF P_DIV = 'X'.
      FREE : P_DATE,P_MATNR.
      IF SCREEN-GROUP1 = 'SC1' or SCREEN-GROUP1 = 'SC2'.
        SCREEN-INPUT = 0.
        MODIFY SCREEN.
        CONTINUE.
      ENDIF .
    ENDIF.
ENDLOOP.
START-OF-SELECTION                                                  *
START-OF-SELECTION.
PERFORM GET_FIELDCATALOG_BASIC.
PERFORM GET_FIELDCATALOG_SECONDARY.
PERFORM POPULATE_DATA.
END-OF-SELECTION                                                    *
END-OF-SELECTION.
*&      FORM GET_FIELDCATALOG_BASIC.
Get Fieldcatalog For Basic List
FORM GET_FIELDCATALOG_BASIC.
FIELDCATALOG_BASIC-FIELDNAME = 'MATNR'.
FIELDCATALOG_BASIC-SELTEXT_M = 'Material Number'.
FIELDCATALOG_BASIC-COL_POS   = 0.
FIELDCATALOG_BASIC-OUTPUTLEN = 20.
FIELDCATALOG_BASIC-HOTSPOT   = 'X'.
FIELDCATALOG_BASIC-EMPHASIZE = 'X'.
FIELDCATALOG_BASIC-KEY       = 'X'.
APPEND FIELDCATALOG_BASIC TO FIELDCATALOG_BASIC.
CLEAR FIELDCATALOG_BASIC.
FIELDCATALOG_BASIC-FIELDNAME = 'MTART'.
FIELDCATALOG_BASIC-SELTEXT_M = 'Material Type'.
FIELDCATALOG_BASIC-COL_POS   = 0.
FIELDCATALOG_BASIC-OUTPUTLEN = 20.
FIELDCATALOG_BASIC-EMPHASIZE = 'X'.
FIELDCATALOG_BASIC-KEY       = 'X'.
APPEND FIELDCATALOG_BASIC TO FIELDCATALOG_BASIC.
CLEAR FIELDCATALOG_BASIC.
FIELDCATALOG_BASIC-FIELDNAME = 'ERSDA'.
FIELDCATALOG_BASIC-SELTEXT_M = 'Created Date'.
FIELDCATALOG_BASIC-COL_POS   = 0.
FIELDCATALOG_BASIC-OUTPUTLEN = 12.
FIELDCATALOG_BASIC-EMPHASIZE = 'X'.
FIELDCATALOG_BASIC-KEY       = 'X'.
APPEND FIELDCATALOG_BASIC TO FIELDCATALOG_BASIC.
CLEAR FIELDCATALOG_BASIC.
FIELDCATALOG_BASIC-FIELDNAME = 'ERNAM'.
FIELDCATALOG_BASIC-SELTEXT_M = 'Created By'.
FIELDCATALOG_BASIC-COL_POS   = 0.
FIELDCATALOG_BASIC-OUTPUTLEN = 15.
FIELDCATALOG_BASIC-EMPHASIZE = 'X'.
FIELDCATALOG_BASIC-KEY       = 'X'.
APPEND FIELDCATALOG_BASIC TO FIELDCATALOG_BASIC.
CLEAR FIELDCATALOG_BASIC.
FIELDCATALOG_BASIC-FIELDNAME = 'SPART'.
FIELDCATALOG_BASIC-SELTEXT_M = 'Division PMG'.
FIELDCATALOG_BASIC-COL_POS   = 0.
FIELDCATALOG_BASIC-OUTPUTLEN = 14.
FIELDCATALOG_BASIC-EMPHASIZE = 'X'.
FIELDCATALOG_BASIC-KEY       = 'X'.
APPEND FIELDCATALOG_BASIC TO FIELDCATALOG_BASIC.
CLEAR FIELDCATALOG_BASIC.
FIELDCATALOG_BASIC-FIELDNAME = 'SPART1'.
FIELDCATALOG_BASIC-SELTEXT_M = 'Division PhWEB'.
FIELDCATALOG_BASIC-COL_POS   = 0.
FIELDCATALOG_BASIC-OUTPUTLEN = 14.
FIELDCATALOG_BASIC-EMPHASIZE = 'X'.
FIELDCATALOG_BASIC-KEY       = 'X'.
APPEND FIELDCATALOG_BASIC TO FIELDCATALOG_BASIC.
CLEAR FIELDCATALOG_BASIC.
ENDFORM.                    "GET_FIELDCATALOG_BASIC
*&      FORM GET_FIELDCATALOG_SECONDARY
Get Fieldcatalog For Secondary List
FORM GET_FIELDCATALOG_SECONDARY.
FIELDCATALOG_SECONDARY-FIELDNAME = 'MATNR'.
FIELDCATALOG_SECONDARY-SELTEXT_M = 'Material Number'.
FIELDCATALOG_SECONDARY-COL_POS   = 0.
FIELDCATALOG_SECONDARY-OUTPUTLEN = 20.
FIELDCATALOG_SECONDARY-EMPHASIZE = 'X'.
FIELDCATALOG_SECONDARY-KEY       = 'X'.
APPEND FIELDCATALOG_SECONDARY TO FIELDCATALOG_SECONDARY.
CLEAR FIELDCATALOG_SECONDARY.
FIELDCATALOG_SECONDARY-FIELDNAME = 'AENAM'.
FIELDCATALOG_SECONDARY-SELTEXT_M = 'Changed By'.
FIELDCATALOG_SECONDARY-COL_POS   = 0.
FIELDCATALOG_SECONDARY-OUTPUTLEN = 20.
FIELDCATALOG_SECONDARY-EMPHASIZE = 'X'.
FIELDCATALOG_SECONDARY-KEY       = 'X'.
APPEND FIELDCATALOG_SECONDARY TO FIELDCATALOG_SECONDARY.
CLEAR FIELDCATALOG_SECONDARY.
FIELDCATALOG_SECONDARY-FIELDNAME = 'LAEDA'.
FIELDCATALOG_SECONDARY-SELTEXT_M = 'Changed ON'.
FIELDCATALOG_SECONDARY-COL_POS   = 0.
FIELDCATALOG_SECONDARY-OUTPUTLEN = 20.
FIELDCATALOG_SECONDARY-EMPHASIZE = 'X'.
FIELDCATALOG_SECONDARY-KEY       = 'X'.
APPEND FIELDCATALOG_SECONDARY TO FIELDCATALOG_SECONDARY.
CLEAR FIELDCATALOG_SECONDARY.
ENDFORM.                    "GET_FIELDCATALOG_SECONDARY
*&      FORM POPULATE_DATA
FORM POPULATE_DATA.
*Get Data From MARA And ZWPBPH Tables
IF P_MATN = 'X'.
SELECT MATNR MTART ERSDA ERNAM AENAM SPART FROM MARA INTO TABLE T_MARA
where MATNR IN P_MATNR .
    IF SY-SUBRC <> 0.
      MESSAGE E001(0) WITH 'Invalid Material Number'.
    ENDIF.
ELSEIF P_DAT = 'X'.
SELECT MATNR MTART ERSDA ERNAM AENAM SPART FROM MARA INTO TABLE T_MARA
where LAEDA IN P_DATE .
    IF SY-SUBRC <> 0.
      MESSAGE E001(0) WITH 'Invalid Date Range'.
    ENDIF.
ELSEIF P_DIV = 'X'.
SELECT MATNR MTART ERSDA ERNAM AENAM SPART FROM MARA INTO TABLE T_MARA
where SPART IN P_DIVIS .
    IF SY-SUBRC <> 0.
      MESSAGE E001(0) WITH 'Invalid Division'.
    ENDIF.
ELSEIF P_MATN = ' ' AND P_DAT = ' ' AND P_DIV = ' '.
SELECT MATNR MTART ERSDA ERNAM AENAM SPART FROM MARA INTO TABLE T_MARA.
ENDIF.
DELETE ADJACENT DUPLICATES FROM T_MARA COMPARING MATNR.
SORT T_MARA BY MATNR.
IF T_MARA[] IS NOT INITIAL .
SELECT PBPINO PBPAPINO FROM ZWPBPH INTO TABLE T_ZWPBPH FOR ALL ENTRIES
IN T_MARA WHERE PBPINO = T_MARA-MATNR.
ENDIF.
IF SY-SUBRC = 0.
    LOOP AT T_ZWPBPH.
      SELECT SINGLE PBPINO PBPAPINO FROM ZWPBPH INTO T_MODEL   WHERE
      PBPINO = T_ZWPBPH-PBPAPINO.
      IF SY-SUBRC = 0.
      SELECT SINGLE PBPINO PBPAPINO FROM ZWPBPH INTO T_PRODUCT   WHERE
      PBPINO
      = T_MODEL-PBPAPINO.
      ENDIF.
      IF SY-SUBRC = 0.
       SELECT SINGLE PBPINO PBPAPINO FROM ZWPBPH INTO T_FAMILY   WHERE
       PBPINO = T_PRODUCT-PBPAPINO.
      ENDIF.
      IF SY-SUBRC = 0.
        SELECT SINGLE PBPINO PBPAPINO FROM ZWPBPH INTO T_LINE   WHERE
        PBPINO = T_FAMILY-PBPAPINO.
      ENDIF.
      IF SY-SUBRC = 0.
   SELECT SINGLE PBPINO PBPAPINO FROM ZWPBPH INTO T_TYPE   WHERE PBPINO
    = T_LINE-PBPAPINO.
      ENDIF.
      IF SY-SUBRC = 0.
     SELECT SINGLE MTART ERSDA ERNAM SPART FROM MARA INTO CORRESPONDING
      FIELDS OF T_ALV WHERE MATNR = T_ZWPBPH-PBPINO AND SPART <>
    T_TYPE-PBPAPINO+1(2).
      ENDIF.
      IF SY-SUBRC = 0.
        MOVE T_ZWPBPH-PBPINO TO T_ALV-MATNR.
        MOVE T_TYPE-PBPAPINO+1(2) TO T_ALV-SPART1.
        APPEND T_ALV.
        SELECT SINGLE MATNR AENAM LAEDA FROM MARA INTO CORRESPONDING
        FIELDS OF T_ALVS WHERE MATNR = T_ZWPBPH-PBPINO.
        APPEND T_ALVS.
        CLEAR T_ALVS.
      ENDIF.
    ENDLOOP.
ENDIF.
SORT T_ALV BY MATNR.
SORT T_ALVS BY MATNR.
call function 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program      = GD_REPID
      i_callback_user_command = 'DISPLAY_DETAIL'
      it_fieldcat             = FIELDCATALOG_BASIC[]
      i_save                  = 'X'
    TABLES
      t_outtab                = T_ALV
    EXCEPTIONS
      program_error           = 1
      others                  = 2.
ENDFORM.                    "POPULATE_DATA
*&      Form DISPLAY_DETAIL
      text
     -->UCOMM      text
     -->SELFIELD   text
FORM DISPLAY_DETAIL USING UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
Select Material Number For Secondary List
DATA: T_ALV_TEMP LIKE T_ALVS OCCURS 0 WITH HEADER LINE.
IF UCOMM = '&IC1'.
    READ TABLE T_ALVS INDEX SELFIELD-TABINDEX.
    IF SY-SUBRC = 0.
      MOVE T_ALVS TO T_ALV_TEMP.
      APPEND T_ALV_TEMP.
    ENDIF.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
        i_callback_program = GD_REPID
        it_fieldcat        = FIELDCATALOG_SECONDARY[]
      TABLES
        t_outtab           = T_ALV_TEMP.
ENDIF.
ENDFORM.                    "DISPLAY_DETAIL

Hi,
Try this in the routine display details
READ TABLE T_ALV INDEX SELFIELD-TABINDEX.
READ TABLE T_ALVS with key matnr = T_ALV-MATNR
thanks

Problem with Customer Interaction Module in Web Channel Builder

Hello Everyone,
Facing an issue with Web Channel Builder Customer Interaction Module.
In Web channel builder we have done all the required configuration changes, but still we are not able to get the reviews and rating part in the product detail page.
We have created a new application and all the other module are working fine ,but the only module that is causing problem is Customer Interaction module. Every time we are activating this module rest modules stops working.
Can anyone please let us know what could be the root cause of this problem.
Are there any setting that has to be done ...that we are missing in?
I have studied that Product Catalogue is integrated with this module. Are there any setting that are to be done in the Product Catalogue module in Web channel builder?
Thanks in advance!
Regards,
PB

Hi PB,
Did you please get any proper error / exception in log file? Did you please check the web.xml as well that there is no same application name defined.
Can you please also copy paste the log please.
Thanks,
Hamendra

SIMPLE DOUBT IN ALV INTERACTIVE REPORTING

HI EXPERETS,
This is part of code in alv interactive reporting.
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
    WHEN '&IC1'.
      READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
      PERFORM BUILD_FIELDCATLOG_EKPO.
      PERFORM EVENT_CALL_EKPO.
      PERFORM POPULATE_EVENT_EKPO.
      PERFORM DATA_RETRIEVAL_EKPO.
      PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
      PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM.                    "user_command
In This i didn't get wat's the meaning of    WHEN '&IC1'.What is
actually &IC1 means.
plz help me.
Regards
Suresh kumar

HI
PLZ REFER TO THIS
*& Report ZTESTDEMO_INTERACTIVE_LIST_2
REPORT ZTESTDEMO_INTERACTIVE_LIST_2.
TABLES: MARA,MARC,MARD.
* internal table itab_mara 3 fields matnr, ernam,mtart
DATA: BEGIN OF ITAB_MARA OCCURS 0,
MATNR LIKE MARA-MATNR, " material number
ERNAM LIKE MARA-ERNAM, " name of person who create
MTART LIKE MARA-MTART, " Material Type
END OF ITAB_MARA.
* internal table itab_marc 3 fields matnr, werks,lvorm
DATA: BEGIN OF ITAB_MARC OCCURS 0,
MATNR LIKE MARC-MATNR,
WERKS LIKE MARC-WERKS, " Plant
LVORM LIKE MARC-LVORM, " Flag Material for Deletion at Plant Level
END OF ITAB_MARC.
* internal table itab_mard 2 fields
DATA: BEGIN OF ITAB_MARD OCCURS 0,
MATNR LIKE MARD-MATNR,
LGORT LIKE MARD-LGORT, " Storage Location
END OF ITAB_MARD.
SELECT-OPTIONS: S_MTART FOR MARA-MTART.
INITIALIZATION.
S_MTART-LOW = 'HALB'.
S_MTART-HIGH = 'HAWA'.
S_MTART-OPTION = 'BT'.
APPEND S_MTART.
START-OF-SELECTION.
SELECT MATNR ERNAM MTART FROM MARA INTO TABLE ITAB_MARA WHERE MTART IN
S_MTART.
PERFORM DISPLAY.
TOP-OF-PAGE.
WRITE:/2(15) 'MATERIAL NO',20(20) 'CREATED BY',45(15) 'MATERIAL TYPE'.
FORM DISPLAY.
LOOP AT ITAB_MARA.
WRITE:/ ITAB_MARA-MATNR UNDER 'MATERIAL NO' HOTSPOT ON,ITAB_MARA-ERNAM
UNDER 'CREATED BY',ITAB_MARA-MTART UNDER 'MATERIAL TYPE'.
HIDE: ITAB_MARA-MATNR.
ENDLOOP.
ENDFORM.
AT LINE-SELECTION.
CASE SY-LSIND.
WHEN 1.
SELECT MATNR WERKS LVORM FROM MARC INTO TABLE ITAB_MARC WHERE MATNR =
ITAB_MARA-MATNR.
PERFORM DISPLAY1.
WHEN 2.
SELECT MATNR LGORT FROM MARD INTO TABLE ITAB_MARD WHERE MATNR =
ITAB_MARC-MATNR.
PERFORM DISPLAY2.
when 3.
sy-lsind = 0.
ENDCASE.
FORM DISPLAY1.
LOOP AT ITAB_MARC.
WRITE:/ ITAB_MARC-MATNR HOTSPOT ON, ITAB_MARC-WERKS,ITAB_MARC-LVORM.
HIDE: ITAB_MARC-MATNR.
ENDLOOP.
WRITE:/ SY-LSIND.
ENDFORM.
FORM DISPLAY2.
LOOP AT ITAB_MARD.
WRITE:/ ITAB_MARD-MATNR, ITAB_MARD-LGORT.
ENDLOOP.
WRITE:/ SY-LSIND.
ENDFORM.
regards
ravish
<b>plz dont forget to reward points if useful</b>

What i sthe diff b/w Interactive Report and ALV Interactive report

Hi All,
I want to know the basic diff b/w Interactive report and ALV interactive report.
Can any one tell me the exact diif.
Thanks in Advance,
Jd

hi jagadish,
both are used for same purpose
interactive report means an output list which displays basic details & allows user to interact, so that a new list is populated based on user-selection. With interactive list, the user can actively control data retrieval and display during the session. a total no of 21 lists including main list are genearetd in interactive lists.
I suggest to use ALV.by using ALV we can display in Grid as well as list format.
Output format will be good . Sorting,Filtering facilities are provided by itself.We can have column headings also. using oops we can also do alv reporting.
if helpful reward some points.
with regards,
suresh babu aluri.

Problem with ALV filter functionality when filtered for multiple values

Hi,
I am facing a problem with ALV filter functionality.
I have displayed an ALV with some columns col_A, col_B and col_C
col_A---- col_B -
col_C
1----
a -
abc
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
5----
f -
stu
From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
i.e. after applying the filter the ALV table looks as below:
col_A---- col_B -
col_C
3----
c -
lmn
But ideally it should be:
col_A---- col_B -
col_C
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
I could not find any OSS note related to this issue.
Please help me resolve this issue.
Thanks,
Feroz

Hi,
I am facing a problem with ALV filter functionality.
I have displayed an ALV with some columns col_A, col_B and col_C
col_A---- col_B -
col_C
1----
a -
abc
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
5----
f -
stu
From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
i.e. after applying the filter the ALV table looks as below:
col_A---- col_B -
col_C
3----
c -
lmn
But ideally it should be:
col_A---- col_B -
col_C
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
I could not find any OSS note related to this issue.
Please help me resolve this issue.
Thanks,
Feroz

Problem with ALV search help Dictionary Search Help

Hello experts
I have a problem with ALV search help.
I use DDIC table ZXXX with text table ZXXX_T. I created DDIC search help form table ZXXX. In my WD application, in context on COMPONENTCONTROLLER i set on attribute: 'Input help mode' as 'Dictionary Search Help' and in 'Dictionary Search Help' I pass name of new created DDIC search help.
I create a input field from that atrribute and search help works fine (there was a value and description for value from text table). So I created ALV witch contains that attribute too.
Next I set column for this attribute in ALV as editable but on Serch help for this collumn I have only value. I DON'T HAVE TEXT DESCRIPTION FOR VALUE.
Please help me and tell me what I do wrong?
Miko

Hello,
Thank's for your help. I create DDic Search help for all fields from my ALV. Next I changed 'TYPE' for all ALV fields in COMPONENTCONTROLLER from ZXXX-Zfield to Zfield, and I changed 'Input help mode' from 'Automatic' to 'Dictionary Search Help'. Now I see Value and Description for value in Search Help in my ALV.
Regards
Miko

What is the difference between interactive report and alv interactive repor

what is the difference between interactive report and alv interactive report
could u plz explain clearly.

Hi Rajesh,
interactive report or alv interactive report , both are same but except the viewer, Abap List Viewer (ALV).
Here in i am placing a sample simple ALV Interactive report.
Just double click on the customer number to go to the next screen.
*& Report ZKAL_ALV_INTERACTIVE_1                                      *
REPORT ZKAL_ALV_INTERACTIVE_1                  .
TYPE-POOLS: SLIS.
TYPES: BEGIN OF TY_KNA1,
          KUNNR TYPE KUNNR,
          NAME1 TYPE NAME1,
          ORT01 TYPE ORT01,
        END OF TY_KNA1.
TYPES: BEGIN OF TY_VBAK,
          VBELN TYPE VBELN,
          ERNAM TYPE ERNAM,
          ERDAT TYPE ERDAT,
          NETWR TYPE NETWR,
          WAERK TYPE WAERK,
         END OF TY_VBAK.
&--WORK AREA & TABLE DECLARATION--
DATA: W_KNA1 TYPE TY_KNA1.
DATA: T_KNA1 TYPE STANDARD TABLE OF TY_KNA1 INITIAL SIZE 1.
DATA: W_VBAK TYPE TY_VBAK.
DATA: T_VBAK TYPE STANDARD TABLE OF TY_VBAK INITIAL SIZE 1.
&--FIELDCAT TABLE & WORK AREA--
DATA: W_FCAT TYPE SLIS_FIELDCAT_ALV.
DATA: T_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: W_FCAT1 TYPE SLIS_FIELDCAT_ALV.
DATA: T_FCAT1 TYPE SLIS_T_FIELDCAT_ALV.
&--EVENT TABLE AND WORK AREA--
DATA: W_EVENTS TYPE SLIS_ALV_EVENT.
DATA: T_EVENTS TYPE SLIS_T_EVENT.
DATA: W_EVENTS1 TYPE SLIS_ALV_EVENT.
DATA: T_EVENTS1 TYPE SLIS_T_EVENT.
&--COMMENT TABLE & WORK AREA--
DATA: W_COMMENT TYPE SLIS_LISTHEADER.
DATA: T_COMMENT TYPE SLIS_T_LISTHEADER.
DATA: W_COMMENT1 TYPE SLIS_LISTHEADER.
DATA: T_COMMENT1 TYPE SLIS_T_LISTHEADER.
&----APPENDING FCAT -
W_FCAT-COL_POS = 1.
W_FCAT-FIELDNAME = 'KUNNR'.
W_FCAT-SELTEXT_M = 'CUST. NO'.
W_FCAT-HOTSPOT = 'X'.            "HOT SPOT HAND SYMBOL
W_FCAT-EMPHASIZE = 'C119'.       "FOR COLORING THE COLUMN 1
APPEND W_FCAT TO T_FCAT.
CLEAR W_FCAT.
W_FCAT-COL_POS = 2.
W_FCAT-FIELDNAME = 'NAME1'.
W_FCAT-SELTEXT_M = 'CUST. NAME'.
APPEND W_FCAT TO T_FCAT.
W_FCAT-COL_POS = 3.
W_FCAT-FIELDNAME = 'ORT01'.
W_FCAT-SELTEXT_M = 'CITY'.
APPEND W_FCAT TO T_FCAT.
W_FCAT1-COL_POS = 1.
W_FCAT1-FIELDNAME = 'VBELN'.
W_FCAT1-SELTEXT_M = 'ORDER NO'.
W_FCAT1-EMPHASIZE = 'C519'.
APPEND W_FCAT1 TO T_FCAT1.
CLEAR W_FCAT.
W_FCAT1-COL_POS = 2.
W_FCAT1-FIELDNAME = 'ERNAM'.
W_FCAT1-SELTEXT_M = 'NAME OF PARTY'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 3.
W_FCAT1-FIELDNAME = 'ERDAT'.
W_FCAT1-SELTEXT_M = 'DATE'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 4.
W_FCAT1-FIELDNAME = 'NETWR'.
W_FCAT1-SELTEXT_M = 'ORDER VALUE'.
APPEND W_FCAT1 TO T_FCAT1.
W_FCAT1-COL_POS = 5.
W_FCAT1-FIELDNAME = 'WAERK'.
W_FCAT1-SELTEXT_M = 'CURRENCY'.
APPEND W_FCAT1 TO T_FCAT1.
&--APPEND COMMENTRY--
W_COMMENT-TYP = 'H'.
W_COMMENT-INFO = 'CUSTOMER DETAILS'.
APPEND W_COMMENT TO T_COMMENT.
CLEAR W_COMMENT.
&--APPEND EVENTS TABLE--
W_EVENTS-NAME = 'TOP_OF_PAGE'.
W_EVENTS-FORM = 'TOPPAGE'.
APPEND W_EVENTS TO T_EVENTS.
W_EVENTS-NAME = 'USER_COMMAND'.
W_EVENTS-FORM = 'SUB2'.
APPEND W_EVENTS TO T_EVENTS.
W_EVENTS1-NAME = 'TOP_OF_PAGE'.
W_EVENTS1-FORM = 'TOPPAGE1'.
APPEND W_EVENTS1 TO T_EVENTS1.
CLEAR W_EVENTS1.
W_EVENTS1-NAME = 'USER_COMMAND'.
W_EVENTS1-FORM = 'SUB3'.
APPEND W_EVENTS1 TO T_EVENTS1.
SELECT-OPTIONS: CUSTNO FOR W_KNA1-KUNNR.
SELECT KUNNR
         NAME1
         ORT01 FROM KNA1 INTO TABLE T_KNA1
         WHERE KUNNR IN CUSTNO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = 'ZKAL_ALV_INTERACTIVE_12'
   I_BACKGROUND_ID                   = 'BIKE'
   I_GRID_TITLE                      = 'CUSTOMER DETAILS'
   IT_FIELDCAT                       = T_FCAT
   IT_EVENTS                         = T_EVENTS
TABLES
    T_OUTTAB                          = T_KNA1 .
FORM TOPPAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = T_COMMENT
     I_LOGO                   = 'LOGO_ALV'.
ENDFORM. "END OF TOPPAGE SUB.
FORM SUB2 USING UCOMM LIKE SY-UCOMM FIELDS1 TYPE SLIS_SELFIELD.
READ TABLE T_KNA1 INTO W_KNA1 INDEX FIELDS1-TABINDEX.
SELECT VBELN
         ERNAM
         ERDAT
         NETWR
         WAERK
               FROM VBAK
               INTO TABLE T_VBAK
               WHERE KUNNR = W_KNA1-KUNNR.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = 'ZKAL_ALV_INTERACTIVE_12'
   I_BACKGROUND_ID                   = 'KALEEM'
   I_GRID_TITLE                      = 'LIST OF ORDERS'
   IT_FIELDCAT                       = T_FCAT1
   IT_EVENTS                         = T_EVENTS1
TABLES
    T_OUTTAB                          = T_VBAK.
ENDFORM.    "END OF SUB2.
FORM TOPPAGE1.
&--APPEND COMMENTRYOF SECONDRY SCREEN--
W_COMMENT1-TYP = 'H'.
W_COMMENT1-INFO = 'LIST OF ORDERS'.
APPEND W_COMMENT1 TO T_COMMENT1.
W_COMMENT1-TYP = 'S'.
W_COMMENT1-KEY = 'CUSTOMER'.
W_COMMENT1-INFO = W_KNA1-KUNNR.
APPEND W_COMMENT1 TO T_COMMENT1.
CLEAR W_COMMENT.
W_COMMENT1-TYP = 'A'.
W_COMMENT1-INFO = W_KNA1-NAME1.
APPEND W_COMMENT1 TO T_COMMENT1.
CLEAR W_COMMENT1.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      IT_LIST_COMMENTARY       = T_COMMENT1
     I_LOGO                   = 'LOGO_ALV'
REFRESH T_COMMENT1.
ENDFORM.    "END OF TOPPAGE1
FORM SUB3 USING UCOMM LIKE SY-UCOMM FIELDS1 TYPE SLIS_SELFIELD.
    READ TABLE T_VBAK INTO W_VBAK INDEX FIELDS1-TABINDEX.
SET PARAMETER ID 'AUN' FIELD W_VBAK-VBELN.
CALL TRANSACTION 'VA02' AND SKIP FIRST SCREEN.
ENDFORM.
U can also find some of the useful codes on WIKI-SDN.
Reward helpful Answers.
Regds,
Kaleem.

Difference between Interactive report and ALV Interactive report.

What is the difference between Interactive report and ALV Interactive report.
i think there is no much difference the same Interactive report Events and functionality we will implement with ALV.
Experts guide me.

Hi,
ALV interactive report gives many advantages than interactive report like sorting, summing and getting graphics.
An interactive report generally basic list displayed. User double clicks on any valid line or user selects a line and presses as button on the tool bar. Then the corresponding event is triggered
refer
http://www.sapgenie.com/abap/drill_down_reports.htm
You can find a interactive ALV report here
http://www.sap-img.com/abap/an-interactive-alv-report.htm
also refer
Below threads consist of number of interactive ALV codes:
interactive ALV code
ALV-INTERACTIVE.
Interactive ALV
Regards

Some problems about ALV

hi everyone:
I have a problem about ALV. The question is I want to show two headers in the gt_item .(Hierachy)
I want to use these in the event "change_fieldcatlog"
LOOP AT I_FIELDCAT.
CASE I_FIELDCAT-FIELDNAME
    WHEN 'MESSWERT'.
     I_FIELDCAT-ROW_POS = 1.
     I_FIELDCAT-SEL_L = '1111'.
     I_FIELDCAT-SEL_M = '1111'.
     I_FIELDCAT-SEL_S = '1111'.
    APPEND I_FIELDCAT.
so I want to add another label in the next row. but I write like this below , it doesn't work .
     I_FIELDCAT-ROW_POS = 2
     I_FIELDCAT-SEL_L = text-004.
     I_FIELDCAT-SEL_M = text-004.
     I_FIELDCAT-SEL_S = text-004.
    APPEND I_FIELDCAT
ENDCASE.
ENDLOOP.
So who can help me ?
thank you in advacne .
Regards
Nick

Hii Nick, in your program I found that you have created only one fieldcat structure, actually we need 2 structures one is for workarea and one for body.
like this
It_Fieldcat type SLIS_T_FIELDCAT_ALV
Is_Fieldcat type SLIS_FIELDCAT_ALV
now you can write the code
LOOP AT It_FIELDCAT into Is_Fieldcat.
CASE Is_FIELDCAT-FIELDNAME
WHEN 'MESSWERT'.
Is_FIELDCAT-ROW_POS = 1.
Is_FIELDCAT-SEL_L = '1111'.
Is_FIELDCAT-SEL_M = '1111'.
Is_FIELDCAT-SEL_S = '1111'.
APPEND Is_FIELDCAT to It_Fieldcat.
clear Is_Fieldcat.
Is_FIELDCAT-ROW_POS = 2
Is_FIELDCAT-SEL_L = text-004.
Is_FIELDCAT-SEL_M = text-004.
Is_FIELDCAT-SEL_S = text-004.
APPEND Is_FIELDCAT to It_Fieldcat.
Clear Is_Fieldcat.
Hope it will works.
Reward points if helpful.

Problem in alv interactive.

Similar Messages

Maybe you are looking for