Problem in Applicant mail assignment

Hi Friends ,
i am facing a problem in sending the mail to Applicant when we the initial data entry is done. the error message is as below
" this standard text does not have the correct format for sapscript"
similarly in Applicant Activity while sending the cofirmation mail i am getting following messeage
"internal error in sap OLE document container control."
i will appreciate if any one can help me in this regard as what is gone wrong in config
thanks in advance
Rajesh Rai

Hi Rajesh,
Have a look at this the below thread for the second case
RE: Internal error in SAP OLE document container control
Regards,
Manoj

Similar Messages

Problems with icloud mail constantly auto-saving

Problems with icloud mail constantly auto-saving - screen freezes. VERY frustrating. running windows 8. same problem through safari, explorer and chrome. Any suggestions to reduce auto save frequency?

Hi Csound1
approx every 30 seconds the browser freezes and 'saving' appears in the top bar of icloud mail. The cursor starts spinning and then after about 8 secs I can start typing again. I also fiund that about 5-6 times a day my icloud browser tab showing mail just close and return to the main icloud menu page showing icons for mail, calender, notes etc

HT4864 I am getting a triangle with an exclamation point next to my inbox...it says: There may be a problem with the mail server or network. Verify the settings for account "MobileMe" or try again. The server returned the error: Mail was unable to log in

I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailable

Also if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.

Problems setting up Mail to Exchange

Hey everyone,
Having a few problems setting up mail to exchange on a Nokia 5800.
We have the latest version of Mail to Exchange installed.
Were using Microsoft Exchange 2007.
Example serup of what we have done:
Mail to exchange - New profile - Input Username and Password of domain account - Input domain name - Chose Internet as means of connection -
The Nokia goes off and searches for the domain information, finds it OK. Shows a message regarding a server certificate, we chose to install this certificate this time only.
Phone crashes?
Any ideas whats going on?
Thansk

Hi Jim,
Depending on the customer feedback, it works fine. Apple Mail the client that comes with OSX supports standard protocols (POP3, IMAP, SMTP), these are all supported by Exchange 2010.
If you're running Mac OS 10.4 Tiger or Mac OS 10.5 Leopard, you can still use the Mac Mail App to connect to your account. However, you need to connect to your account without using IMAP or POP.
If you're running Mac OS 10.6 Snow Leopard or Mac OS 10.7 Lion, you can use the Mail program included with those releases to connect to your email account automatically using an Exchange account.
When you use Mac OS 10.6 Snow Leopard or Mac OS 10.7 Lion and connect using an Exchange account, you can use features that aren't available to users who connect through IMAP or POP, including iCal and Address Book.
More details about Set up email in Mac OS X Mail, please refer to:
https://support.office.microsoft.com/en-in/article/Set-up-email-in-Mac-OS-X-Mail-de372dc4-9648-4044-a76c-e8a60e178d54?CorrelationId=a0ce4c19-1492-4e3b-bc7e-4af83d3cb347&ui=en-US&rs=en-IN&ad=IN
Additional, I find a similar thread about your question, for your reference:
https://social.technet.microsoft.com/Forums/exchange/en-US/b112b61e-401f-4ad9-b459-a25673ff5407/connecting-to-exchange-2010-using-apple-mail?forum=exchange2010
https://social.technet.microsoft.com/Forums/en-US/d3c9b4ad-822b-4a7c-88b8-39df3f166f96/how-to-setup-exchange-account-on-macbook-os-x?forum=exchange2010
Best Regards,
Allen Wang

I am having problems gettting my mail to work ... Mac telling me that my start up disk id full and to delete some files to free up space ... have done this but when i open mail from the dock it just brings up the colour wheel and nothing happening

I am having problems gettting my mail to work ... Mac telling me that my start up disk id full and to delete some files to free up space ... have done this but when i open mail from the dock it just brings up the colour wheel and nothing happening ... it shows when you right click on the mail icon that " application not responding"

If your hard drive is getting full, you need to free up, at least, 20 GBs of space on your iMac's hard drive.
If your Mac is running a fairly recent version of OS X, here are some general guidelines.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Other things you can do to gain space.
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it run the automatic ans S.M,A.R.T. tests, then go to the cleaning and maintenance tabs and run the tabs that have the ability to clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck!

Problem description: mac mail not opening, software updates not working, app store not opening. imac osx 10.9.5

Problem description:
mac mail not opening, software updates not working, app store not opening. 10.9.5
EtreCheck version: 2.0.11 (98)
Report generated 1 December 2014 16:51:49 CET
Hardware Information: ℹ️
iMac (21.5-inch, Late 2009) (Verified)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
BANK 0/DIMM1
2 GB DDR3 1067 MHz ok
BANK 1/DIMM1
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400 - VRAM: 256 MB
iMac 1920 x 1080
BenQ GL2240 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 1:32:17
Disk Information: ℹ️
WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (164.03 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
EPSON EPSON Epson Stylus S22 Series
Canon MX410 series
ASMedia AS2105 1 TB
S.M.A.R.T. Status: Verified
EFI (disk3s1) <not mounted> : 210 MB
Backup (disk3s2) /Volumes/Backup : 999.86 GB (506.24 GB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader 7.95 GB
S.M.A.R.T. Status: Verified
EOS_DIGITAL (disk1s1) /Volumes/EOS_DIGITAL : 7.94 GB (7.83 GB free)
Western Digital My Book 1140 2 TB
S.M.A.R.T. Status: Verified
EFI (disk2s1) <not mounted> : 210 MB
2TB (disk2s2) /Volumes/2TB : 2.00 TB (1.50 TB free)
Wacom Co.,Ltd. CTE-450
Contour Design ShuttlePRO v2
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24217.979618) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24217.979618) Support
[not loaded] com.parallels.kext.netbridge (9.0 24217.979618) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24217.979618) Support
[not loaded] com.parallels.kext.vnic (9.0 24217.979618) Support
/Applications/Toast 10 Titanium/Toast Titanium.app
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
/Library/Extensions
[loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
/System/Library/Extensions
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
WkSvMacX: Path: /Library/StartupItems/WkSvMacX
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[running] at.obdev.LittleSnitchUIAgent.plist Support
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS4ServiceManager.plist Support
[running] com.epson.epw.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[running] at.obdev.littlesnitchd.plist Support
[failed] com.adobe.fpsaud.plist Support
[loaded] com.adobe.versioncueCS4.plist Support
[loaded] com.barebones.textwrangler.plist Support
[running] com.cleverfiles.cfbackd.plist Support
[not loaded] com.gopro.stereomodestatus.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[invalid?] com.tvmobili.tvmobilisvcd.plist Support
[loaded] fi.polar.libpolar.plist Support
[running] fi.polar.polard.plist Support
[failed] xxx.qnation.PeerGuardian.kextload.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[running] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[invalid?] com.plexapp.helper.plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
SmartDaemon Application (/Library/Application Support/CleverFiles/SmartDaemon.app)
SilverKeeper Scheduler ApplicationHidden (/Applications/SilverKeeper.app/Contents/Resources/SilverKeeper Scheduler.app)
Dropbox Application (/Applications/Dropbox.app)
Garmin ANT Agent UNKNOWN (missing value)
Internet Plug-ins: ℹ️
DirectorShockwave: Version: 11.5.7r609 Support
Google Earth Web Plug-in: Version: 6.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
PandoWebInst: Version: 1.0 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.239
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.0.0 Support
AdobePDFViewer: Version: 10.1.12 Support
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: (null) Support
Safari Extensions: ℹ️
Open in Internet Explorer
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Adobe Version Cue CS4 Support
DivX Support
Flash Player Support
Flip4Mac WMV Support
GoPro Support
Growl Support
Java Support
MacFUSE Support
MenuMeters Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Destinations:
Back Up [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
      12% Google Chrome
      12% WindowServer
      4% Dock
      2% Little Snitch Agent
      2% SystemUIServer
Top Processes by Memory: ℹ️
399 MB iTunes
322 MB mds_stores
216 MB Google Chrome Helper
193 MB Google Chrome
155 MB com.apple.IconServicesAgent
Virtual Memory Information: ℹ️
6.64 GB Free RAM
3.51 GB Active RAM
1.36 GB Inactive RAM
1.11 GB Wired RAM
1.91 GB Page-ins
0 B Page-outs

[not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
Un-install according to the developer's un-install instructions.
You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
CleanMyMac - Uninstall
CleanMyMac2 Un-install
After un-installing, run this program to make sure you got all the pieces.
EasyFind – Spotlight Replacement
Do a backup.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.appstore.plist. Move the .plist to your desktop.
Restart, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

Safari 6.0.2 problems with Yahoo Mail Classic "Compose"

Since upgrading to Mountain Lion I have had two problems using Yahoo Mail “Classic” in Safari 6.0.2 (8536.26.17).
First when composing a new message, the Formatting Toolbar is missing.
Second, contacts do not appear as I type in the To:/Cc:/Bcc: address sections of a message, nor does the address book if I click on To:/Cc:/Bcc:
All Yahoo Mail features work correctly with Firefox & Chrome, it seems as though Safari is the only browser with an issue.
Any help would be greatly appreciated.
Many Thanks in advance.
Mick
Safari Screen Shot with Missing Toolbar
Chrome Screen Shot with Toolbar

Others have reported the same issue:
Mountain Lion/Safari 6 doesn't work...: Apple Support Communities
There's a chance you might be able to get it to work by enabling the Develop menu in Safari's Advanced preferences, then selecting Develop > Disable Site-specific Hacks. I don't recommend it, though. Just use another browser for that site.

Why do I get an "unable to connect - There may be a problem with the mail server or network." message from iCloud. I have verified the settings. I can access my iCloud account online but can't send or receive e-mail via the mail account.

Text limits to the "Question" link prevents a full explanation:
This is a long-time problem. I have tried to resolve it with Apple but their "Customer Support" is merely a name.
I can go online and access my e-mail but when I try to send or receive e-mail via iCloud through my internet server (Google fiber now but the same situation existed with my prior service), I receive "There may be a problem with the mail server or network. Verify the settings for 'Apple Email' and try again.
"The server returned the error: The server 'p0-imap.mail.me.com' refused to allow a connection on port 143."
Well, I have verified the setting and tried again and again and …
Well, you get the idea …

JungleTaxi Cabbie wrote:
Csound1: iCloud: Configuring Mail with Mac OS X v10.6 or iOS 4
Enter your Incoming Mail Server, User Name, and Password using the following settings:
Incoming Mail Server: mail.me.com
User Name: Your iCloud email address (excluding @me.com)
Password: Your password
Last Modified: Jun 27, 2013
Maybe you should test these things before calling people out, because these settings do function perfectly well.
iCloud is not supported on Snow Leopard or lower, why bother to mention it?
The OP has an iCloud account, and that can not be opened without Lion or Mountain Lion (on a Mac), IOS5 or 6 (on an iPhone/iPad)
The document I linked to is Apples documentation for iCloud on current devices,I don't care whether you believe that you know better than they do, but it will affect the people who follow your advice as it won't work
JungleTaxi Cabbie wrote:
Also, if you're not running Lion or Mountain Lion, there is no "Mail, Contacts & Calendars" prefpane.
I never said that there was, perhaps you imagined it.

TS3899 With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this pro

With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.

Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.

Problem in Reading Mail Attachement

I'm facing a problem while reading mail attachments. Java-mail returns null disposition for the below message,but this message has attachment javamail is not considering the mail attachment .I'm using java-mail 1.3.Can anybody help me to solve this problem ?
Return-Path: prvs=00548bd8bd=[email protected]
Received: from PRODTM1.TRUST.UASC.AO ([172.28.2.143])
     by trust.uasc.net
     ; Mon, 14 Mar 2011 11:07:04 +0000
X-TM-IMSS-Message-ID:<[email protected]>
Received: from gw.northport.com.my ([202.188.31.130]) by trust.uasc.net ([172.28.2.144])
with ESMTP (TREND IMSS SMTP Service 7.1) id 45727fb90003495a ; Mon, 14 Mar 2011 11:06:52 +0000
Received: from [192.1.10.13] (port=59768 helo=nmbsmtp-01.northport.com.my)
     by gw.northport.com.my with esmtp (Exim 4.69)
     (envelope-from <[email protected]>)
     id 1Pz5bs-0003EO-0A; Mon, 14 Mar 2011 19:06:48 +0800
X-CTCH-RefID: str=0001.0A090205.4D7DF6C8.0116,ss=1,fgs=0
Date: Mon, 14 Mar 2011 19:05:50 +0800 (SST)
From: AMTedi-Container Svcs <[email protected]>
Message-ID: <[email protected]>
Mime-Version: 1.0
To: [email protected], [email protected],
[email protected], [email protected]
Subject: CODCT1UAS
Content-Type: multipart/mixed; boundary="-"
X-TM-AS-Product-Ver: IMSS-7.1.0.1394-6.5.0.1024-18010.003
X-TM-AS-Result: No--4.942-5.0-31-1
X-imss-scan-details: No--4.942-5.0-31-1

If you were assuming that every message would have a valid body part
and that they would tell you definitively which parts you should consider to
be "attachments", ya, that won't work. The disposition is a hint at best.
It can be wrong. It might not even be there.

Problem: Cannot send mail unless Password is transmitted insecurely & Port is set to 587.. Can receive mail but can't send..

Problem: Cannot send mail unless Password is transmitted insecurely & Port is set to 587.. Can receive mail but can't send Code 501..
Need help with T-bird.. My OS is Win XP-64..Have been using Mozilla for about 10 years with little or no problems.. This happened when I upgraded to 3.17.. Spent hours on T-Bird diagnostics web site.. Called Comcast & talked to a net tech.. he ran some tests on his end & had me log into my Comcast e-mail account & all worked well,, so he concluded the problem was in T-Bird.. He had me change my port to 587 & disable connection security & authentication to none & I was able to send mail.. That was all he could do.. Comcast was working.. the problem is in T-Bird.. Can any one help with this problem.. I don't want to send mail with my password transmitted insecurely..
Thanks
Richard

It was not intended to be "snide". You said two separate things that at face value would be out of the ordinary.
I considered if it might be a typo for 31.7. Since 31.5 is the current formal release, I would have to thank you for volunteering to test a pre-release beta version. If it was truly 3.1.7 then it would appear that you have chosen, or have become stuck with a somewhat ancient version. In either case it's harder to reach out to you with any meaningful comments or advice. However I do watch various other sites and newsgroups and I don't see a clamour of distressed users, so it seems fair to suppose that this feature isn't actually broken in 31.7.
And you said XP 64. XP is obsolete and no longer supported and if there is a 64-bit version, then again you have set yourself apart from the mainstream.
I had a look at the comcast site and found some puzzling recommendations. Some users come here asking how to set up a secured connection in Thunderbird when it isn't offered by the server. Comcast are different, in that they mention the ports 143 and 587, and also 993 and 465. So far so good, in that security is actually on offer, but they also suggest that you enable SSL, regardless of which port is being used. It would be unusual and unconventional to offer TLS or SSL on ports 143 and 587. STARTTLS would be more credible on these ports.
Have you tried IMAP on 993 and SMTP on 465? SMTP on 587 with SSL, or TLS, is not impossible, but is improbable.

Problem in sending mails to multiple persons

Hi,
I have a problem in sending mails to multiple people....
My mail is using the local smtp server...The mail is to be send to multiple addresses in to and cc.
for e.g the to address will have --> [email protected];[email protected]
cc address will have --> [email protected];[email protected]
How do this i.e set multiple to and cc address...
My function that sends mail from my ejb looks like this...
// create some properties and get the default Session
     Properties props = new Properties();
     props.put("mail.smtp.host", host);
     Session session = Session.getDefaultInstance(props, null);
     try{
     Message msg = new MimeMessage(session);
     msg.setFrom(new InternetAddress(from));
//I HAVE TO SET MULTIPLE "TO" ADDRESSES HERE INSTEAD OF JUST 1
     InternetAddress[] address = {new InternetAddress(to)};
     msg.setRecipients(Message.RecipientType.TO, address);
//I HAVE TO SET MULTIPLE "CC" ADDRESSES HERE INSTEAD OF JUST 1
InternetAddress[] addresscc = {new InternetAddress(cc)};
     msg.setRecipients(Message.RecipientType.CC, addresscc);
     msg.setSubject(msgSubj);
     msg.setSentDate(new java.util.Date());
     msg.setText(msgText);
     Transport.send(msg);
     }catch (MessagingException ex) {
System.out.println("\nException handling in javaMail.java :" + ex);
Please help me out with a solution!!!Thanks in advance.
Thanks
Rahul

Hi all,
Got the solution...
We have to use addRecipients method of the Message class to add as many receipts we want to set.
example: Message.addRecipients(type,address).
Thanks
Rahul

Problem in sending mail from VF03

Hi
I am just getting a problem in sending mail to the recipient from script.
please find the below code and let me know why there is no data in otf_tab table.
DATA: otf_tab TYPE TABLE OF itcoo WITH HEADER LINE.
CALL FUNCTION 'CLOSE_FORM'
    IMPORTING
      RESULT = i_itcpp
    TABLES
      otfdata = otf_tab
    EXCEPTIONS
      OTHERS = 1.
IF otf_tab[] IS NOT INITIAL.
      TRY.
          CREATE OBJECT mailer
            EXPORTING
              i_nast = nast.
     mailer->get_mail_address( EXPORTING i_adrnr = vbdkr-adrnr ).
          mailer->get_mail_address( EXPORTING i_adrnr = vbdkr-adrnr
                                                 i_vkorg = vbdkr-vkorg
                                                i_vtweg = vbdkr-vtweg ).
        zcl_sd_mail_output=>convert_otf_to_pdf( IMPORTING pdf_xstring =
        gv_pdf_string
                                                CHANGING otf_table   =
                                                otf_tab[] ).
          mailer->build_and_send_email( EXPORTING pdf_xstring =
          gv_pdf_string ).
        CATCH zcx_sd_mail_no_mailid INTO error.
          error_txt = error->get_text( ).
          zcl_sd_mail_output=>protocol_update( msg_id = 'VN'
                                               msg_nr = '902'
                                               msg_ty = 'E'
                                               msg_v1 = error_txt ).
          retcode = 1.
          CLEAR error_txt.
      ENDTRY.
    ENDIF.
Since my OTf_tab is initial i am unable to send mails.

Hi,
If the OTF Data table is blank then you might have missed the parameter "GETOTFDATA" at the time of calling "OPEN_FORM". Please pass field TDGETOTF = "X" in paramter "OPTIONS" when you are calling "OPEN_FORM".
You can also visit this link for more information.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/49e15474-0e01-0010-9cba-e62df8244556?QuickLink=index&overridelayout=true
Cheers,

Problem in sending mail

Hi all,
I'm having some problem in sending mail. I did all configuration regarding this. After that when i tried to send mail, its giving some error, tht is, "SendMailService is not available".
Can anybody help me on this.
Thanks,
Raj

Hi Raj,
Go to System Administrator > System Configuration > Knowledge Management > Content Management > Global Services > Mailing Service and make active option true, then restart your portal. Hope it'll work fine.
Regards,
Ganpati Jha

Problem in sending mail through dynamics actions

Hi Friends,
I have a problem in sending mail through dynamics actions . In this we pass a subroutine in dynamics actions which send an mail when promotion action occured.
Problem is that sometimes it will send an mail or sometimes not. I have no idea to solve this problem.
Can anyone suggest me .
Thanks ,
Anish
Moderator message : Duplicate post locked.
Edited by: Vinod Kumar on Sep 5, 2011 9:45 AM

Hi,
Check that all the bindings have been done in proper way as it is configured.. Try to do the binding manualy..This could also be the problem..
thank You

Problem in Applicant mail assignment

Similar Messages

Maybe you are looking for