Problem in applicant no range

Hi
I have assigned internal no range for applicants in NUMAP feature.
But in PB10-Initial data entry, SAP system does not assign a no from no. range automatically rather says no range is external, enter a personnel no.
Please help me. It's urgent.
Thanks
Rajesh

check once again in PB04 NO for ur number range and see if it is marked external or internal and also check yet again if u have assigned correct return value in NUMAP.
Although very basic...sometimes if u forget to generate the feature in which case the changes u made may not have taken affect..

Similar Messages

  • Problems using writeXML on Range Paging ViewObject

    We have a ViewObject configured to work with Range Page feature (it has up to 150 thousand rows), it works very nicely, fast and fine.
    But the problem appears when we try to use the writeXML functionality on this Range Paging ViewObject, and exception is thrown, seems that writeXML calls any other rowset method than next().
    Any suggestion about how to solve this problem? (without disabling range paging feature on the ViewObject).
    Thanks in advanced.
    The thrown exception is:
    oracle.jbo.InvalidOperException: JBO-25011: El juego de filas <ViewObjectName> sólo permite desplazarse hacia delante.
         at oracle.jbo.server.ViewRowSetImpl.createViewRowSetIterator(ViewRowSetImpl.java:811)
         at oracle.jbo.server.ViewRowSetImpl.createRowSetIterator(ViewRowSetImpl.java:794)
         at oracle.jbo.server.RowSetImpl$1$RSIEnumeration.<init>(RowSetImpl.java:247)
         at oracle.jbo.server.RowSetImpl.getRowsEnumerator(RowSetImpl.java:259)
         at oracle.jbo.server.RowSetImpl.getXMLElementNode(RowSetImpl.java:147)
         at oracle.jbo.server.ViewObjectImpl.appendXMLElementNodes(ViewObjectImpl.java:9805)
         at oracle.jbo.server.ViewObjectImpl.writeXML(ViewObjectImpl.java:9707)

    Eliseu -
    Unfortunately with the forum software not escaping any XML content, I'm having a real hard time figuring out what kind of problem you are having with detail disclosure. I did post a response to your message in the UIX forum:
    Problems with details disclosure
    You might want to check out my response and post any follow-ups there...
    Andy

  • Facing problem while tranporting number ranges via OONR transaction

    Hi Experts,
    Facing problem while tranporting number ranges via OONR transaction from Development to Quality.
    We have different number ranges for plan version.
    And in the table T77S0 :  NUMRG     COMP
    We have value maintained as space.
    Please advice.
    Thanks in Advance.
    Regards,
    IFF

    Hi IFF,
    What is the error you're getting?
    Can you please elaborate a little bit?
    Regards,
    Dilek

  • Feature NUMAP - Applicant Number Range is not working

    Dear Experts,
    I have set number range from xx to xx with number 25 (for Applicant Number), and set the NUMAP feature as follow:
    Molga:
    >>25 Singapore
         >> PERSG (Applicant Group)
              >> Z Outsource Employee
                   >> 25 (number range that i have set up earlier)
    The problem is whenever i perform initial data entry the applicant always took other number range ( i already choose the Z as the applicant Group and personnel area that correspondence to Singapore). Do I miss something here? Thank you.
    Best Regards

    HI,
    First maintain the number range through Transaction code - PB04. Like
    No            From Number             To Number                    Current Number        External Number Range
    01            000000001                  00001000                                                      Tick th emark if you want external number
    Then Maintain your Feature NUMAP.
    Country grping- like (25)
    Return Value  (01)  As we have defined in PB04.

  • Applicant number range-NUMAP

    Friends
    We have configured the recruitment and the NUMAP feature is internal starting from 1.
    We have performed the initial entry of basic data action, applicant number is generated with 1. but the current number showing as 5 in the number ranges
    Again we have performed the same action, then the applicant number generated as 6 and the current number status showing as 10
    But it should be generated sequence wise like 1, 2 3 etc why system creating in such a way
    Regards
    Kiran

    This thread talks about number range buffer being guilty for range number jump. It could also solve your issue.
    [Number range function module giving problem;

  • External Display Problem - Frequency out of range with lid closed

    I have read this - http://docs.info.apple.com/article.html?artnum=86286 - it should work, but it does not.
    I have a black macbook, an apple usb keyboard, a usb mouse and a19" gateway lcd display (max resolution 1440x900). Everything used to work great. Now for some reason no matter what resolution & mhz I set the external display and the macbook to it will not work with the lid closed, I can set bot to the lowest settings (640 x 480) and when I close the lid and wake the mac the message on the external display says "Frequency out of range." I will work fin in either mirror or extended mode with the lid open. Any suggestions? I've tried resetting the pram already and run the disk repair on the start up disk.

    I never did figure it out - but the problem has been solved..
    I did tried to trash a bunch of preference files - no joy.
    I fixed it the old fashioned way - I installed a fresh system (don't waste your time with an archive and install - it just imported the corrupt files). Works fine now..

  • Problem in Applicant mail assignment

    Hi Friends ,
                     i am facing a problem in  sending the mail to Applicant   when we the initial data entry is done. the error message is as below
    " this standard text does not have the correct format for sapscript"
    similarly in Applicant Activity while sending the cofirmation mail i am getting following messeage
    "internal error in sap OLE document container control."
    i will appreciate if any one can help me in this regard as what is gone wrong in config
    thanks in advance
    Rajesh Rai

    Hi Rajesh,
      Have a look at this the below thread for the second case
    RE: Internal error in SAP OLE document container control
    Regards,
    Manoj

  • Problem in adjusting the range of long value

    Hi all
    I have problem
    I have application running in C language which sends data to other application which is running in java .. Its through socket communication
    My doubt is in C the size of long is 4bytes and in java 8bytes
    my C application is sending a negative long value
    so with C long has 32 bit in which the last bit is for signed/unsigned
    but the value when i convert in java will i get postive value or negative value
    In java long is 64 bits and last is for signed/unsigned
    So when i convert that C long value which is a negative value to Java long value it come under the range of postive java long value
    How to solve this

    Well I think you need to make up your mind what the problem is. In your OP you said this:
    my C application is sending a negative long valueand now you're saying this:
    but C is sending only positive long value.In any case all you have to do is convert the 4 bytes to a Java integer correctly, which is just a few shifts and masks.
    But it would be both easier and clearer to use the methods of DataInputStream directly on the input stream to give you the appropriate datatypes as they arrive, without using the byte[] array at all.

  • Problem in Miro number range assignment

    Dear Gurus,
    Iam facing the problem in MIRO generation i have to assign no ranges for miro please assist me how can i assign the miro numberranges.
    Regards
    Hari kumar

    Hi
    For LIV document, maintain number range number, year (may be till 9999) and from & to number u=in transaction OMRJ.
    Maintain the number range number for the transactions RD & RJ.
    Path: IMG--> Matl mgmt --> LIV --> Incoming invoice --> Number assignment --> Maintain Number Assignment for Logistics Documents
    warm regards
    sairam akundi

  • Applicant number range

    when hiring applicant applicant number is coming multi ple of 5
    first applicnt 5 and next applicant 10 and next applicant 15 like this number is coming
    pls put some light on this
    thanls

    dear ghouse,
    You have selected internal... if am wrong.
    Standardly some records are existing in the tables...
    go to the tables and delete the records not required..
    and set the NO. RANGE STATUS as your requirement then save  and process...
    check once

  • Applicant Number Ranges are getting skipped

    Hi,
    In my client's production server while entering initial applicant data the internal number ranges are getting skipped.
    For Example someone has done Initial Data Entry for the Applicant, the Applicant number generated is 40. Then in the next entry it is taking 45.
    This skipping of Applicant numbers are quite erratic sometimes 5, sometimes 7, sometimes 10 etc.
    Samriddhi

    Just wondering if you found a solution to this. I am experiencing the same issue.

  • Problem in CO No range (KANK)

    Hi
    In KANK, I have inserted 4 groups like Primary Postings, Planning, Actual posting, Other Transactions and also assigned no ranges in each group.
    Now the objects like COIN, KOZO which should show by default under not assigned - not showing here. Under 'Not Assigned' - its showing blank, no objects are here.
    Can you please tell me is it any kind of problem or is their any settings so that it can come by default.
    Priya

    Hi i got the same problem where i can create the groups but i dint find any business transaction in quality client like RKP1,COIN etc there is totally blank where i check the programme and i found the table TKA04 where there i can find in the development but not in quality client can you help me on these
    Regards
    Rammohan

  • Packing instructions - problem with external number range

    Hi Gurus:
    I have a problem with configuring packing instructions. I have created a number range entry with external numbering (tx. OPIN), but when I want to create a new packing instruction in POP1, I get an error message: Manually-entered packing instruction ID cannot be checked (Message no. VHU01116). Can you please tell me how to avoid this error message?
    The system works fine if the number range is set to internal. As a matter of fact, initially I did create a setting with internal numbering and conducted a couple of tests, but I had to change the "external" flag in the number range to meet business requirements. Is it possible that somehow the system does not recognize that I have changed the flag and I need to run some generation program or something similar?
    I appreciate your valuable input
    Tamas

    For further records:
    we have found the problem after debugging the function. In order for the system to accept the external number range, a second number range object with ID 02 must be maintained in OPIN. Then you can use this number range as external and keep the first as internal.

  • Problem when define Value range for data element

    Dear
    When I define a new data element in ABAP Dictionary, for example, ZDATA_ELEMENT_TEST.
    I use domain ZDOMAIN_TEST.
    (Data type is DEC, the length is 10, and decimals is 2 with sign.)
    Now, I want to restrict that, user can ONLY input the value from 10 to 100.
    From ABAP course and the Internet, I switch to "Value Range" tab, and define 10 for Lower Limit, 100 for Upper Limit in Intervals section.
    And write the simple program.
    PARAMETERS test TYPE ZDATA_ELEMENT_TEST.
    WRITE: test.
    And run it.
    Line: -
    But, there is a problem.
    When I input 200 for test, the program still run and display 200 to screen without any error report or notification. The ABAP runtime system doesn't check the input value.
    I want to config for the domain that can satisfies, if the user input the wrong value (e.g: 200 in the previous case), the program will auto raise the error report, or exception, or sth like that.
    Any help is welcome.

    Hi Hanni,
    Welcome to forum.
    Try to attach key word VALUE CHECK to your PARAMETER statement.
    I.e:
    PARAMETERS test TYPE ZDATA_ELEMENT_TEST VALUE CHECK.
    Note: The addition VALUE CHECK cannot be used together with the additions AS CHECKBOX, RADIOBUTTON, or NO-DISPLAY.
    Regards,

  • Problem printing my time range

    I'm trying to print my iCal weekly view for the range of 10am to 8pm, but when I print it prints the whole day (12am to 10pm!). In the prefs I have "day starts" and "day ends" to the proper times. And if I set view to "Day" it prints the right range. Any reason it would be doing this, or does anyone know of a workaround so I can print just the time range I want?
    Thanks,
    Tony
    Power Mac G5   Mac OS X (10.4.9)  

    I don't see any problems with your permissions.. it is showing read and write for everyone.
    But the TC trash works differently.. and can cause issues.. all of this is the reason you should not be using the TC as a NAS..
    See E6 here about emptying trash..
    http://pondini.org/TM/Troubleshooting.html
    Also your TC name is too long.
    See C9 for why you should keep you name shorter..
    In fact under Mavericks.. I would stick to SMB standard .. 2-20 characters.. less than 10 even better.
    No spaces
    Pure alphanumeric.
    Much pain when Mavericks is involved.
    Pondini also has some instructions on better way to use the TC if you do want to mix data and TM backups.
    Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Remember also if you move this data to the TC it cannot be backed up by Time Machine in the computer.. and you will have no backup of your files.

Maybe you are looking for