Problem in Applying Basis Patch 25 in Mini Was

Hi
I am trying to Install the SAPKB62025 Patch, the patch is processing Upto 20% displying the message as "TP buffer proceessing OK" after that no progress even after 8 hrs, still showing 20% completed, So i stopped the tp Window and i got the prblems as DDIC_Activation.
Can anyone advise me on that.
Thank you in Advance.
Karan

Craig, Karan, the problem dicussed here is EXACTLY what I am facing. It looks like I do have to perform the Kernel, TP and DB upgrades first. Can one of you guys tell me, which actual files to download? Also if you guys have more detailed information on how to actually perform these various tasks. I hope you guys can give me some more detailed guidelines on how to perform these actual tasks. If documentation would be too much to add in this Forum, please sent me an email to [email protected] Both thanks in advance for sharing you very valuable knowledge. Tiest

Similar Messages

Error applying basis patch SAPKB70013

Hi, i am applying basis patch 13 currently i am facing one error import_proper error. i am not able to do any thing. i am getting below dump. can any body help on this?
What happened?
    Error in the ABAP Application Program
    The current ABAP program "????????????????????????????????????????" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "SAPLTMSU " in include "LTMSUTOP
     " in
    line 26:
    "The TYPE-POOL "CTSC" is unknown."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "????????????????????????????????????????" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.

Hi Suresh,
are there any users working in your system while you import the SP?
It could   very well be that the import error is related to someone who was using at that time the program.
It is always recommended to apply SPs while noone is working on the system.
Rgds,
Loukas

Problem with applying a patch to zdoom in AUR

I did a little searching and found out about the patch command, but I'm still having some issues with applying this patch. Can anyone help me out? I'm not sure when to be running the patch command and what parameters to use. Thanks in advance.
http://aur.archlinux.org/packages.php?ID=16403
http://mancubus.net/svn/gzdoom/trunk/dumb/src/it/itrender.c?r1=114&r2=354&view=patch

raptir wrote:
The root of the problem is that when running makepkg, you get this:
[ 15%] Building C object dumb/CMakeFiles/dumb.dir/src/it/itrender.o
/home/mike/zdoom/zdoom/src/zdoom-2.3.1/dumb/src/it/itrender.c:3559: error: static declaration of 'log2' follows non-static declaration
make[2]: *** [dumb/CMakeFiles/dumb.dir/src/it/itrender.o] Error 1
make[1]: *** [dumb/CMakeFiles/dumb.dir/all] Error 2
make: *** [all] Error 2
==> ERROR: Build Failed.
Aborting...
The patch provided supposedly fixes that by renaming a function (log2 to mylog2) in itrender.c. I've tried simply running patch -i dumb.patch before running makepkg, but that obviously doesn't work since none of the files are downloaded. I'm guessing that I need to put the patch command somewhere in pkgbuild, I'm just not sure where.
So far, I've just downloaded and extracted the tarball, then I get the above error when running makepkg.
Well you don't need to get the package tarball alone. Get the tarball and open up the PKGBUILD file, see where it gets the source from, then get that source and apply the patch to it. After that you can just compile it yourself...

Problem after Applying SP19 patch 30

We have recently applied SP19 Patch 30 to BI JAVA in development system. After this upgrade when we run a query and use teh F4 Help on any of the selections, the screen shows '???' instead of the text of all the values.
Doe any one know the issue and the solution for this.
Thanks
Amit

Install patches for BEx addon 7.0 which is available in service market place and also install DotnetFx exe in your PC.
Hope this would resolve your issue.

Problems while applying Manifest Patch on Linux - 11.5.10 CU2

Hi,
We're migrating our Application Tier (11.5.10 CU2) from HP-UX 11.23 to Linux RedHat 5 (32 Bits).
While applying Manifest Patch , I've got the the following Error Messages :
Starting link of rg executable 'RGSSRQ' on Wed Jan 12 16:21:41 IST 2011
gcc -s -L/nerp/release11i/ora_top/8.0.6/lib -L/nerp/release11i/ora_top/8.0.6/lib/stubs -ldl -o /nerp/release11i/appl_top/rg/11.5.0/bin/RGSSRQ /nerp/release11i/appl_top/rg/11.5.0/lib/rgssrq.o \
/nerp/release11i/appl_top/rg/11.5.0/lib/librg.a /nerp/release11i/appl_top/fnd/11.5.0/lib/libfnd.a /nerp/release11i/appl_top/gl/11.5.0/lib/libgl.a -lsql /nerp/release11i/ora_top/8.0.6/lib/nautab.o /nerp/release11i/ora_top/8.0.6/lib/naeet.o /nerp/release11i/ora_top/8.0.6/lib/naect.o /nerp/release11i/ora_top/8.0.6/lib/naedhs.o `cat /nerp/release11i/ora_top/8.0.6/lib/naldflgs` -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /nerp/release11i/ora_top/8.0.6/lib/sysliblist` -ldl -lpthread -lm /nerp/release11i/ora_top/8.0.6/rdbms/lib/defopt.o /nerp/release11i/ora_top/8.0.6/rdbms/lib/ssbbded.o
/usr/lib/gcc/i386-redhat-linux/4.1.2/../../../crt1.o: In function `_start':
(.text+0xc): undefined reference to `__libc_csu_fini'
/usr/lib/gcc/i386-redhat-linux/4.1.2/../../../crt1.o: In function `_start':
(.text+0x11): undefined reference to `__libc_csu_init'
collect2: ld returned 1 exit status
make: *** [nerp/release11i/appl_top/rg/11.5.0/bin/RGSSRQ] Error 1
Done with link of rg executable 'RGSSRQ' on Wed Jan 12 16:21:41 IST 2011
Relink of module "RGSSRQ" failed.
-> All the binaries have not been compiled/generated.
Thank's for your help !

Hi,
I've checked all the Rpms and Kernel Versions : OK.
I ran an Rda for 11.5.10 CU2 , and I received the following Errors :
Default Action
Result: FAILED
Value: G++Elsewhere
LdElsewhere
Some of the required software tools for the the application tier of Oracle E-Business Suite Release 11i (11.5.10.2) installation were not found.
Check your installation.
Return Value Action
ArNotFound ar is not found in PATH.
ArElsewhere ar is not in /usr/bin as required.
GccNotFound gcc is not found in PATH.
GccElsewhere gcc is not in /usr/bin as required.
G++NotFound g++ is not found in PATH. <====
G++Elsewhere g++ is not in /usr/bin as required.
KshNotFound ksh is not found in PATH.
LdNotFound ld is not found in PATH.
LdElsewhere ld is not in /usr/bin as required. <====
MakeNotFound make is not found in PATH.
MakeElsewhere make is not in /usr/bin as required. Please note that ld and g++ are located in /usr/bin so i don't know if to trust this rda output :
which ld
/usr/bin/ld
which g++
/usr/bin/g++
And the Path is:
echo $PATH
/usr/bin:/nerp/release11i/ora_top/8.0.6/bin:/nerp/release11i/appl_top/fnd/11.5.0/bin:/nerp/release11i/appl_top/ad/11.5.0/bin:/usr/java/jdk1.6.0_23/bin:/nerp/release11i/comm_top/util/unzip/unzip/unzip-5.50::/nerp/release11i/ora_top/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/opt/java1.3/bin:/opt/ansic/bin:/opt/java1.3/bin

Runtime error at installing basis patch

hi
experts
i applied basis patch SAPKB60070012 in ECC 6.0 with databse oracle10.2.0after iam logging to the sap i got run time error below
Runtime Errors         SYNTAX_ERROR
Date and Time          22.10.2008 11:03:27
Short text
     Syntax error in program "SAPLSCP2 ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLOLEA" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program "SAPLSCP2 " in include
      "CL_SALV_FORM_ELEMENT==========CU " in
     line 13:
     "The type "IF_SALV_FORM_CONFIG" is unknown."
     The include has been created and last changed by:
     Created by: "SAP "
     Last changed by: "SAP "
Error analysis
     The following syntax error was found in the program SAPLSCP2 :
     "The type "IF_SALV_FORM_CONFIG" is unknown."
igger Location of Runtime Error
Program                                 SAPLOLEA
Include                                 LOLEAU13
Row                                     71
Module type                             (FUNCTION)
Module Name                             AC_CALL_METHOD
urce Code Extract
ne SourceCde
41   DATA AC_GLOBAL_FLUSH_MODE TYPE C.
42   DATA MAXLINES          TYPE I.
43   DATA URL(255)          TYPE C.
44   DATA LEN               TYPE I.
45   DATA FLDTYPE           TYPE C.
46   DATA DOLPARAM          TYPE C.
47   DATA NCOMPS            TYPE I.
48   DATA I                 TYPE I.
49   DATA N(2)              TYPE N.
50   DATA SIZE              TYPE I.
51   DATA SVARS_WA          LIKE svars_record.
52
53   FIELD-SYMBOLS: <F>, <AC_X1> TYPE X, <AC_X2> TYPE X,
54                  <EXPORTS_WA> TYPE OLE2_METH_PARMS.
55
56 For the call to CL_ABAP_CHAR_UTILITIES=>charsize......................
57   CLASS CL_ABAP_CHAR_UTILITIES DEFINITION LOAD .
58
59
60 * Initialisation
61   CLEAR: EXPORTSINDEX, PARAMS, MESSAGE_NR, MESSAGE_TEXT.
62
63 * check and set the AC_FRONTEND_RUNS_IN_UTF8 parameter.
64 * if the AC_FRONTEND_RUNS_IN_UTF8 parameter is set, multiply the string parameter len by 3
65 * to avoid parameters being truncated in the frontend.
66   IF AC_FRONTEND_RUNS_IN_UTF8 <> ABAP_TRUE.
67
68     DATA : gui_uses_utf8 TYPE rststype-sel_ok.
69
70     " ask Matthias whether SAPGUI uses the length critical codepage UTF-8
>>>     CALL FUNCTION 'SCP_GUI_USES_UTF8'
72       IMPORTING
73         gui_uses_utf8 = gui_uses_utf8.
74
75     IF gui_uses_utf8 IS NOT INITIAL.
76       AC_IS_FRONTEND_UTF8 = abap_true.
77     ENDIF.
78
79     AC_FRONTEND_RUNS_IN_UTF8 = abap_true. "set to true to avoid multiple calls
80   ENDIF.
81
82
83 * If there are entries in IMPORTS set the RETURN_VALUES_EXIST for
84 * smart flushing. So if RETURN_VALUES_EXIST = ' ' a flush can be
85 * postponed in AC_FLUSH_CALL
86   IF NOT IMPORTS[] IS INITIAL.
87     RETURN_VALUES_EXIST = 'X'.
88   ENDIF.
89
90 * determine size of exports table
what is the solution for it.

hi venkat
u execute this tp command at /usr/sap/trans/bin with sidadm user.before executing of this command take backup
/usr/sap/trans/bin # tp r3i SAPKB70014 SID pf = /usr/sap/trans/bin/TP_DOMAIN_KDV.PFL -Dclientcascade=yes -Drepeatonerror=8 -Dsourcesystems= tag=SPAM
i got tp error 8 in my server.which error u got u mention above.
NOTE:After executing this command return must be 0 or 4.other than this u contact sap.wont tell about this command
after solving this problem u enter spam tcode and import queue.dont open another transactions while installaing patch except spam.
i tried almost three times i succeed.
regards
vasu

Basis patch IMPORT_PROPER error

Hi All,
Iam applying basis patch 12 .
I have done this on other system with no problem, but on the
current one, it seems to hang on the "imp all" step (displayed
next to the spinning clock.
I opened another session I canceled spam transaction.
it is giving error.
Import_proper.
How to overcome this problem.
Regards
Siva

Hi Markus & sunil,
I applied patch, But problem is same.
APQUA:oraeqa> /oracle/EQA/102_64/OPatch/opatch apply
Invoking OPatch 10.2.0.2.0
Oracle interim Patch Installer version 10.2.0.2.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home       : /oracle/EQA/102_64
Central Inventory : /oracle/oraInventory
   from           : /oracle/EQA/102_64/oraInst.loc
OPatch version    : 10.2.0.2.0
OUI version       : 10.2.0.2.0
OUI location      : /oracle/EQA/102_64/oui
Log file location : /oracle/EQA/102_64/cfgtoollogs/opatch/opatch-2008_Nov_06_13-
42-32-CST_Thu.log
ApplySession applying interim patch '5099990' to OH '/oracle/EQA/102_64'
Invoking fuser to check for active processes.
Invoking fuser on "/oracle/EQA/102_64/bin/oracle"
OPatch detected non-cluster Oracle Home from the inventory and will patch the lo
cal system only.
Please shutdown Oracle instances running out of this ORACLE_HOME on the local sy
stem.
(Oracle Home = '/oracle/EQA/102_64')
Is the local system ready for patching?
Do you want to proceed? [y|n]
y
User Responded with: Y
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '5099990' for restore. This might take a
while...
Backing up files affected by the patch '5099990' for rollback. This might take a
while...
Patching component oracle.rdbms, 10.2.0.2.0...
Updating archive file "/oracle/EQA/102_64/lib/libserver10.a" with "lib/libserve
r10.a/opiexe.o"
Updating archive file "/oracle/EQA/102_64/lib/libserver10.a" with "lib/libserve
r10.a/opitsk.o"
Updating archive file "/oracle/EQA/102_64/lib/libcommon10.a" with "lib/libcommo
n10.a/ttcclr.o"
Running make for target ioracle
ApplySession adding interim patch '5099990' to inventory
Verifying the update...
Inventory check OK: Patch ID 5099990 is registered in Oracle Home inventory with
proper meta-data.
Files check OK: Files from Patch ID 5099990 are present in Oracle Home.
The local system has been patched and can be restarted.
OPatch succeeded.
SAPQUA:oraeqa>
Regards
Siva

Develope new OAF page in 11.5.9 without applying the patch 3262919

Could any one please tell me how to develop the OAF page on 11.5.9. The following are the details of the 11.5.9.
Version Information
OA Framework Version 5.7.H.V2
MDS Version 9.0.3.6.6 (build 557)
UIX Version 2.1.16
BC4J Version 9.0.3.10.62
Build Date May 13, 2003
My client is not ready to apply the patch OA Framework Mini-pack 11i.FWK.H : (3262919). Is there any other way to devleop the new OAF page.
Its very urgent. Plssssssss help me in this issue.
Thanks a lot in advance.
cheers,
Raju

OA Framework Version 5.7.H.V2 is very old and won't fetch you even the 30-40% of the latest version's capability. Development on this level won't be so useful.
Follow Sumit's advise and let us know.
--Shiv

Error in basis patch SAPKB64012

Hello
I got the duplicate key error while applying basis patch SAPKB64012 in import_proper phase
Can anyone tell me the solution for this
Thanks

Hi Aashu,
Please refer to Note 88656, section 29, and use the attached allow file to ignore the error.
Basis Support Package SAPKB64013 deletes the corrupt entries in RSMPTEXTS.
Note 88656, section 29 says,
There is "data scrap" in the target table.
The error can also occur in the target table of the existing data scrap.
In many cases, R3trans essentially reads the existing table entries in
sorted sequence to merge them with the newly transported entries. Data
scrap may result in the entries not being returned correctly in sorted
sequence.
These scrap characters, in many cases, were distributed by transports
into several systems.
In the majority of cases, these types of errors can only be solved by
cleaning up the export system and repeating the transport. If the error
also occurs in when you are importing the cleaned-up transport, the data
scrap must also be cleaned up in the import system.
As of Release 6.20, data scrap is no longer exported. See section 5c in
Note 1074030, and Note 718511.
How to do:-
Please copy the attached file(from note) in AB64012.zip to /usr/sap/trans/cofiles
or /usr/sap/put/cofiles and repeat the import.
You can do the same for SP SAPKB64013.
Please use the latest versions of the tool 'tp' along with 'r3trans'
as well.
Please let me know if it resolves or not.
Thanks
kishore

After applying the patch showin error in pages

i applied one patch yesterday which size was 1.5mb i applyed that as hot patch after applying the patch when uer want to open the front end it showing this error that
ORA-04063: package body "APPS.ARPT_SQL_FUNC_UTIL" has errors
FRM-40735: WHEN-NEW-ITEM-INSTANCE trigger raised unhandled exception ORA-06502.
when i am clicking the recevable manger form.any body help me here.
This is the patch number 4727382

They meant to say that the instance is screwed up. You need to clone from your PROD.
Please check the below doc's for cloning procedures.
Note:216664.1 : FAQ: Cloning Oracle Applications Release 11i
Note:406982.1 : Cloning Oracle Applications Release 12 with Rapid Clone
Note:230672.1 : Cloning Oracle Applications Release 11i with Rapid Clone
You'll find many thread's on cloning in oracle forums. they could be handy.

LOGIN PROBLEM AFTER APPLYING SAP_ BASIS PATCHES

Hi Experts,
I applying sap_basis support pack from level 16 to 20. when applying first patch it create more dumps and give the below syntax error. After that it cannot allowed to login to the GUI and create a dump. No any transcations codes are allowed. so please guide me to solve the problem.
The syntax error message:
Short text
    Syntax error in program "SAPLSDOC ".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPMSYST" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "SAPLSDOC " in include
     "CL_GUI_ALV_GRID===============CU " in
    line 127:
    "Type "IF_ALV_PRINT_PARAMETER_PROXY" is unknown"
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "SAPMSYST" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    The following syntax error was found in the program SAPLSDOC :
    "Type "IF_ALV_PRINT_PARAMETER_PROXY" is unknown"
Regards
S.Balaji

First check your<DIR_TRANS>/tmp directory What files are there ??
Then check <DIR_TRANS>/log directory
There will be a log there for sure
Pravin

TP_STEP_FAILURE " ERROR WHILE APPLYING SAP NW 04 SR1 ABA AND BASIS PATCHES

Hi Freinds!!
..I have completed cinst, dbinst, client copy, jinst, xinst installation for XI 3.0 INSTALLAION ON ABAP + JAVA.
I have first applied PI_BASIS patches and middle of it, it displayed the message that pre-requisite are not met i.e. First SAP_BW , SAP_BASIS, SAP_ABAP pathces needs to apply.
While applying SAP_BASIS and SAP_ABA patches... I'm getting the following error message ...
" The import was stopped, since an error occurred during the phase IMPORT_PROPER, which the Support Package Manger is unable to resolve without your input..
After you have corrected the cause of the erro, continue with the import by choosing Support
Package > Improt Queue from the initial screen of the Support Package Manager.
The following details help you to analyze the problem :
-Error in phase : IMPORT_PROPER
-Reason for Error : TP_STEP_FAILURE
-Return Code : 0012 "
....So, what could be the cause of the problem ? Do I need to increase table space through brtools command at ora<sid> ?!!
Pl. help....
Many thanks in advance...
-Rupen Patel

Thanks a lot everybody.
Although I had upgraded Kernel Patch Level from 43 to 155, the real cause was, it seems that was maxed out Oracle Table, ..as I found it through ST22 tr code which inturn displayed a logfile which displayed the details of error. I used brtools to extend the tablespace of a table, reapplied the patches thorugh SPAM and it worked out quite smoothly.
Thanks again and Regards,
-Rupen Patel

Problems after applying patch 5 of CM & Collaboration on EP 6.0 SP2

hi everyone.
here is the problem
we recently applied patch 5 for CM on EP 6.0 SP2
the portal platform is at patch 27.
after having applied the patch the logs indicated that the upgrade sequence completed successfully.
however after we restarted the portal and logged back in none of the KM repositories are accessible. it just says not found / is not accessible or is not available.
under system admin when we go into Content Management Configuration it says invalid Repository Managers.
i have reset the SAPWCM user password and check the connection pool settings but still nuthin.
i have checked the cm.properties and config_local.properties files. however i have no document to compare what the correct format of the entries in these files is. i know they are supposed to have identical entries.
can somebody help?
thanks

Hi,
I had the same problems after patching CM. I had to re-enter the WCM password of the 3 CM Conenction Pools in the CM Configuration under "jdbc connection pools".
Hope this helps
Cheers,
Jochen

Error Applying BASIS Support Patch 10

Dear all,
I am facing syntax errror when i apply basis support patch 10.When i try to enter any T code its give me syntex error.
And spam status show error stop IMPORT_PROPER
Runtime Errors         SYNTAX_ERROR
Date and Time          30.12.2008 01:31:48
Short text
     Syntax error in program "SAPLKKBL ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSALV" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program "SAPLKKBL " in include
      "CL_SALV_BS_DATA_TABLE=========CU " in
     line 20:
     "The type "T_TYPE_CELL" is unknown."
     The include has been created and last changed by:
     Created by: "SAP "
     Last changed by: "SAP "
Please help me out for this error.
Regards,
Kumar

Hi,
Firstly, do you have a backup to fallback in a worse case situation?
Is the import still running at the OS level - please check whether there is any active tp process at the OS level and the import log files in the DIR_TRANS/tmp directory getting updated ? What are the contents of the files?
Cheers

Is apple really going to make us buy a new applie mine was only bought in 2008 only 4 yrs old no problems whats the deal, why was I offered Lion if mountian lion was not going to be able to be used on my macbook. Apple come on this is rediculous!!!

s apple really going to make us buy a new applie mine was only bought in 2008 only 4 yrs old no problems whats the deal, why was I offered Lion if mountian lion was not going to be able to be used on my macbook. Apple come on this is rediculous!!!

Macbooks are only supported if the're late 2008 Alu or early 2009 or later:
The OP may have an early 2008 Macbook. You have a Macbook Pro, which is different.

Problem in Applying Basis Patch 25 in Mini Was

Similar Messages

Maybe you are looking for