Problem in approval of a sc whose requisitioner has been delimited

Hi all ,
The spend limit approver of a shopping cart is not able to approve the SC although it is there in his inbox.He is getting an error ("Error while processing your request ").The requistioner was delimited after he had accepted the changes from the buyer.Is it because of this?I checked the workflow in SWI5 and found the message "Execution interrupted" in message text.please help and suggest a solution .
Regards,
Saurav

Dear Poster
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Jason Boggans
SAP SRM SDN Moderator

Similar Messages

  • Problem description: My  macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click-  EtreCheck

    My computer
    Problem description:
    My  macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
    EtreCheck version: 2.1.8 (121)
    Report generated 31 de março de 2015 18:29:15 BRT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        16 GB RAM Upgradeable
            BANK 0/DIMM0
                8 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                8 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 250
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 512 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
    Disk Information: ℹ️
        Hitachi HTS545032B9A302 disk0 : (320,07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.trusteer.rapport.rapportd.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.trusteer.rooks.rooksd.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    UNKNOWN Hidden (missing value)
        AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
        Stickies    Application  (/Applications/Stickies.app)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
        AdobePDFViewer: Version: 10.1.13 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        npsf_cef: Version: sf 3.3.1.1 [Click for support]
        Google Earth Web Plug-in: Version: Unknown
    Safari Extensions: ℹ️
        DivX HiQ
        DivX Plus Web Player HTML5 <video>
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
        MacFUSE  [Click for support]
        Perian  [Click for support]
        Trusteer Endpoint Protection  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
        Destinations:
            Time Machine Backups [Local]
            Total size: 999.86 GB
            Total number of backups: 60
            Oldest backup: 2012-07-15 01:16:54 +0000
            Last backup: 2015-03-29 19:28:06 +0000
            Size of backup disk: Excellent
                Backup size 999.86 GB > (Disk size 318.84 GB X 3)
    Top Processes by CPU: ℹ️
            97%    rapportd
             3%    WindowServer
             1%    mds
             0%    fseventsd
             0%    distnoted
    Top Processes by Memory: ℹ️
        155 MB    Safari
        120 MB    Finder
        86 MB    rapportd
        86 MB    WindowServer
        69 MB    mds_stores
    Virtual Memory Information: ℹ️
        12.56 GB    Free RAM
        2.53 GB    Active RAM
        428 MB    Inactive RAM
        1.66 GB    Wired RAM
        1.04 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 31, 2015, 06:00:15 PM    Self test - passed
        Mar 31, 2015, 01:13:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
        Mar 31, 2015, 01:05:42 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
        Mar 31, 2015, 12:24:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
        Mar 30, 2015, 05:45:38 PM    /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
        Mar 30, 2015, 01:52:07 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
        Mar 29, 2015, 05:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
        Mar 29, 2015, 01:06:38 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
        Mar 29, 2015, 01:02:47 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

    Open Activity Monitor and kill this process - rapportd.
    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • TS1559 I bought my iphone 4s in usa apple store but when i write my serial number to support center i see warning like that. What is the problem ? Our records indicate that this product has been replaced. Please provide the serial number for your replacem

    I bought my iphone 4s in usa apple store
    ihave trouble with my iphone wifi that is gray and cannot connect any wifi network.
    i want to support for this issue.
    but when i write my serial number to support center i see warning like that. What is the problem ?
    Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.

    Nobody here would know.  Contact Apple and ask them

  • TS1702 I am having a problem with the apple app Numbers.  It has been waiting for a week.  I can not open it or delete it

    I am having a problem with the apple app Numbers.  It has been waiting for a week.  I can not open it or delete it

    I found the images here: https://support.mozilla.org/en-US/questions/977542#answer-501598

  • Hi, my iPhone was stolen and now i can't receive messages from people with iPhones. What do i do to fix this problem, and get my old messages? This has been a problem for 3 weeks!

    Hi, my iPhone was stolen and now i can't receive messages from people with iPhones. What do i do to fix this problem, and get my old messages? This has been a problem for 3 weeks!

    This won't get your old messages back but will help with new ones: https://selfsolve.apple.com/deregister-imessage

  • My iphone will not recognize any usb cables. I have tried 3 official apple ones and 2 different plugs. Ive tried plugging it into my laptop but will not find the phone. it has had problems since i updated my ios. Battery has been replaced.

    I have tried 3 official apple ones and 2 different plugs. Ive tried plugging it into my laptop but will not find the phone. it has had problems since i updated my ios. Battery has been replaced. Any suggestions would be fantastic

    test if it charges with an ac charger
    test if it's detected by another computer
    if it's no to both then likely the connector is broken
    if it's yes to both thne it's likely your computers itunes install which is the problem

  • Problem In F110  with status message " Payment run has been released "

    Dear Friends,
    We have an Strange issue in payment program...
    While executing the payment program they got below Status Messages
    Parameters have been entered
    Payment proposal has been created
    Payment proposal has been edited
    *Payment run has been released 13.05.08 15:42:58
    Program ends up without single payment....While trying to Delete the Proposal or Payment those selection are in grey color (Deactivated Mode) ...
    With same parametrs we have tried to run another payment run but there is no proposals selected...
    Question :
    1) How can I delete 1st Payment Run Proposal as well as Payment ID's
    Could you please Advise Neccessary actions which is required for solving the issue...
    Thanks in Advance
    Regards
    Suresh Polineni

    You can delete the payment run proposal in the following sequence
    1) first delete the output file
        Edit-Payments-Delete output
    2) delete the proposal file
         Edit-proposal -Delete
    3) if u want delete the parameters also in the similar way.
    for digging the problem why the payments are not happened, just check the exceptionals list then u can easily catch the error point.
    I hope it will provide some clue to clear your problems.
    Regards
    Madhav

  • Possible security problem with my iPhone4, it seems like it has been hacked into and my hotmail, facebook and university accounts (which all have different passwords) and proceed to change my passwords on me. This has happened twice.

    I seem to be having security problems with my iPhone4, it seems like someone has hacked into my hotmail, facebook and university accounts (which all have different passwords) and proceed to change my passwords on me. This has happened twice and I have not left my phone unattended at any time that I can recall nor have I accessed these accounts from another source (i.e. computer/laptop) since changing my passwords after the first hacking occurred. Please help.

    Anyone else at your university complaining about the same thing?  It is more likely someone is stealing passwords by sniffing traffic over the university wifi or with a man-in-the-middle attack or by other means external to your phone.  Try a Google search on "steal password" (without quotes) or "steal SSL password" and you'll learn more than you wanted to know about how passwords get stolen.
    Some related info:
    http://en.wikipedia.org/wiki/Session_hijacking
    http://en.wikipedia.org/wiki/Man-in-the-middle_attack

  • Why is my ipad2 constantly disconnecting from wifi?  We have had the ipad for 1 year with NO problems; then just this week (9-2) it has been disconnecting itself.  All other Mac products in the house (macpro, macpro air, iphones) all work fine... HELP!

    Can anyone from APPLE help us?  Just recently the ipad 2 has been disconnecting itself.  WE have had NO issues for 1 year.  All other Apple products in the house are running fine from same router/wifi.  Did Apple suddenly do something to ipad that is causing this disruption?? 

    You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • TS4009 Ipad mini message " Not enough Storage" This ipad cannot be backed up because there is not enough storage. problem is that the screen is frozen and has been for days. Will not even allow me to turn off device or slide the screen open not matter wha

    Ipad mini screen is frozen. Message says Not Enough Storage. Cannot be backed up ect. problem is I can not enter settings to manage storage or even turn the device off. the screen is frozen and will not allow me to do anything. Anyone got any ideas?

    OMG!! Thank you, Thank you, Thank you! I did what you suggested and it worked! I know nothing about this stuff. You made my day!

  • Reports for GRN whose Invoice has been done

    Hi all,
    i want a report which will show the list of GRN whose Invoice verification has bee done.
    Is there any standard report or can i create with ABAP query which table and field to be used.
    i required vendor#,GRN#,IV# if done otherwise blank.
    Regards,
    SAGAR

    Hi,
    Check whether this report satisfies your requirement. Tcode -  MIR5.
    Else this is possible using a Query. The tables and fields you will require is below.
    Vendor# - MSEG / LIFNR
    GRN# - MSEG / MBLNR
    IV# - RBVD / RBLNR
    Be mindful of how you link these two tables.
    Regards,
    Tharaka

  • How to find all the photos whose date has been modified?

    I have recently exported my entire collection of photos and I realized that (perhaps) some of the photos whose dates I have modified in iPhoto, have not been exported with the updated date but maybe the original dates.
    Is there a way for me to find all the photos whose dates I modified in iPhoto?

    no
    LN

  • Since latest upgrade I have 2 problems 1. fast dial didn't work, but has been fixed with changing the version. This happened before. Now the big problem is when I attempt to upload pics Facebook or attach documents to e-mail firefox crashes. HELP!

    tried several suggestions. Nothing works

    Create a new profile as a test to check if your current profile is causing the problems. See Basic Troubleshooting: Make a new profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins"
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See also http://kb.mozillazine.org/Firefox_crashes

  • I have problems with iphone 4 battery since IOS 7 has been loaded

    Since I have loaded IOS 7 on my IPHONE 4 I encounter problems with the battery. It's unloaded very quickly. Do you have got such problem with IOS version 7?
    Thanks

    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/

  • Problem with ORA-04061: Existing state of string has been invalidated Tips

    hi,
    i'm a oracle developer and work in a IRON Industry, in our industry we have several levels of data communications, in our level 2, all of software developed on .NET platform, and in level 3 we have oracle tools such as form builder, we have a connector called ICC that developed in .Net platform, ICC gathers datas from level 2 on tcp/ip and write in a oracle database(level 3), a BEFORE INSERT trigger wrote on a table that ICC insert into it datas and calls several packages in the level 3, we have oracle database 10g R2, in this database if state of one of dependent procedures or functions that called in main package changed to INVALID then this trigger doesn't work, if any body have any suggestion to change our solution please help me.
    Thanks alot

    Arash wrote:
    hi,
    i'm a oracle developer and work in a IRON Industry, in our industry we have several levels of data communications, in our level 2, all of software developed on .NET platform, and in level 3 we have oracle tools such as form builder, we have a connector called ICC that developed in .Net platform, ICC gathers datas from level 2 on tcp/ip and write in a oracle database(level 3), a BEFORE INSERT trigger wrote on a table that ICC insert into it datas and calls several packages in the level 3, we have oracle database 10g R2, in this database if state of one of dependent procedures or functions that called in main package changed to INVALID then this trigger doesn't work, if any body have any suggestion to change our solution please help me.
    Thanks alotThis probably is not specific to your .NET application. If you can reproduce this from SQL*Plus please post this over on one of the OTN database forums, as there a lot more DBAs over there who could potentially help you.

Maybe you are looking for

  • Replacement iPod won't show in iTunes 6.0.5

    I purchased a 60GB video iPod Feb 2006 from the online store and the HOLD button stopped working, 3 days ago. I went to an Apple retail store and received a brand new replacement iPod against the 1 year warranty. I brought the new iPod home and it sp

  • Is there a way to get rid of the space left when I delete a field?

    I have a document that I am editing and I have deleted some fields but that leaves big white spaces in the document.  Is there some way that I can get rid of those spaces without having to manually move up all the subsequent fields one by one?

  • Error in process

    Hi all, When i am executing a process having BPM, I am getting a system error and channel not found error. In SXI_cache, BPM is active. The scenario is from sap to legacy system thru XI. There are only three steps start-receive and stop. BPM is recei

  • Webcam not working after installing Windows 7

    Help please, I have been trying to fix this problem since I purchased this Touchsmart IQ524 and installed Windows 7. I have installed every update on the HP site per insturctions. The only time my webcam works is if I return to vista operating system

  • Screen becomes black with a reboot message in the center

    During normal operations a black translucent curtain drops from the top of my Late 08 Macbook Pro's screen and a multi-lingual message box appears in the center of the screen telling me I must reboot. This never happened prior to installing Snow Leop