Problem in ARE 1 Document creation

Hi,
When I am doing Export sales .After creation of excise invoice when I am creating ARE1 document Schess (Secondary and higher education Cess) is not getting copied from excise invoice to ARE1 document.
But ED and ECS are getting copied in to ARE1 document.
Please help do I need to do any configuration for get Schess values to ARE1 document.
Thanks.

Hi,
I think the SE cess will not be coming in your excise invoice display as well....
Please ensure that the note 1036568 is present in your system and implement the user exit J_1I7_USEREXIT_DUTY_IN_EXPORT,
Add the following code.
SUPPRESS_CALCULATION = 'X' .
If you do not want the excise duty to be calculated for a particular
transaction then you need to mark the flag supress_calculation as 'X'
This flag when left blank will trigger calculation of ED during j1ii
When it is marked, the ED copied from billing will be left as it is.
After getting it done from your ABAPer you can do a complete sales cycle and check again. I am sure it'll work.
Rgds,
Antima

Similar Messages

Excise Invoice List-Pending for ARE document creation

Dear All,
Is there any standard Tcode for getting the list of excise invoice which are pending for ARE documents creation or with the status of ARE documents.
Thanks & Regards,
Antima

Hi,
No there is no standard report available for this requirement. You may need to develop a Z report.
J1ARE_AGE gives u the status after creation of ARE1.
Thanks
Krishna.

Problem in word document creation

Dear All,
I am creating document by using the interface.
I can see the document is getting created and opened, but immediately it is getting closed
I want this document to be open until i close. How can i suceed.
Here is my code below
    CALL METHOD c_oi_container_control_creator=>get_container_control
      IMPORTING
        control = gi_cont_control.
* Initialiaze container control Mandatory
    CALL METHOD gi_cont_control->init_control
      EXPORTING
        inplace_enabled          = ' '
        inplace_scroll_documents = 'X'
        no_flush                 = 'X'
        r3_application_name      = 'TEST'
        register_on_close_event = 'X'
        register_on_custom_event = 'X'
        parent                   = gcl_custom_container
        name                     = 'TESTING'
        autoalign                = 'X'
      EXCEPTIONS
        javabeannotsupported     = 1
        OTHERS                   = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
* Get the reference of the document proxy
    CALL METHOD gi_cont_control->get_document_proxy
      EXPORTING
        document_type = 'Word.Document.8'
      IMPORTING
        document_proxy = gi_document
        error          = gi_error.
    CREATE OBJECT gcl_event_doc.
    SET HANDLER gcl_event_doc->on_close_doc FOR gi_document.
    CALL METHOD gi_document->create_document.
Regards,
Lisa

Solved it by own.
Just call method in PAI this will solve the problem

I have just reinstalled Adobe Acrobat X1 and I can't save any PDF's that are emailed to me. I just get "This document could not be saves. There is a problem reading this document (21)" and then when I click OK i get "insufficient data for image" Help!

I have just reinstalled Adobe Acrobat X1 and I can't save any PDF's that are emailed to me. I just get "This document could not be saves. There is a problem reading this document (21)" and then when I click OK i get "insufficient data for image" Help!

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

I am facing problem document creation the error is Message no. 3G103

i am facing problem document creation the error is Message no. 3G103

Dear Satish,
Usually this error is due to a wrong customizing.
Go through note 1594322 and 179655 will help you to make an analysis of this issue, you should created an excel file for each wage type which should be posted as it is showed in the note.
1594322 Error message 3G103 in RPCIPE00 & RPCIPE01 'Posting balance is
not cleared' 179655 RPCIPE00:Rejectn, employee w.posting bal.not clrd
Best Regards,
Deepak.

11.0.10 Update Issue - Problem saving documents - getting message "This document could not be saved. There was a problem reading this document (21)." The PDF documents are being created by Esker VSIFax and the problem is only occuring with updated vers

Our IBM Unix system uses a program called VSIFax (Esker) to create PDF documents such as invoices. Users that have updated to Acrobat version 11.0.10 can open the PDF but then when trying to save the document the get a message "This document could not be saved. There was a problem reading this document (21)." The problem is only occuring with updated version 11.0.10 (11.0.9 works fine).

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

Message - There was a problem reading this document (57)

Anyone else have this problem?
Purchased version of Windows 32 bit version of Acrobat XI update will not install properly or work.
First error info message is as per title after initial red screen which only appears once.
Second error info message is verify operation failed.
2 downloads, 3 installs and 2 repairs produce same result.
Adobe Australia called three times on 1800614863 but only automated selections 322323 made and transfer promised.
First call at 0901 local time.
All calls placed on hold first two timed out.
31 minutes into third call got an answer from a man in India.
In answer to my question:
Are you receiving reports of problems installing purchased upgrade versions of Acrobat XI Pro?
The answer was No.
He took details of messages and offered to help but I declined.
I have purchased and used all Acrobat Pro upgrades since 6.
Complete installation attempted.
Being done on a clean install of Windows XP SP3 on an OQO02 with only other program installed Office 2007 SBE.
Message was edited by: OQOroger to reflect inability to connect to seller Adobe Australia. Also Adobe site can't stay on Australia but reverts to USA. Full price of $A282 paid. USA purchasers only pay $US199 ($A191.57 at present exchange rates.) Credit card account already debited for purchase made yesterday. Subject line corrected 'as' changed to 'was'.
Message was edited by: OQOroger Corrected the price paid and currency conversion amount to show extra paid by Australians for 'local' support (from India). Added 'Message -' to title to make it less cryptic.
Message was edited by: OQOroger Typical setup installation results in same problems except
'There was a problem reading this document (57)'
window does not appear.
First window displaying and asking for acceptance of license conditions has no bottom section when first displayed so there is no way to accept these conditions except to close this window (confirm window appears) and launch program again when bottom panel is displayed.

Despite my advice of some of the many faults I have experienced with Acrobat XI Pro, Adobe support has never asked me to provide a 'Systems Report' which is available under the 'Help' tab.
This report indicates:
'Installed Acrobat: C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
    Version: 11.0.0.379
    Creation Date: 2012/09/23
    Creation Time: 8:43:44 PM'
So if anyone has a working version other than 379 please let me know.
Complete 'Systems Report' is in a window named 'System Information' as is set ot below.
From first window
Adobe Acrobat Pro
menu
Help/Online Support/Generate System Report
returns window
System Information
with 2 parts
'System Parameters' and 'Installed Plug-ins'
first part details:
System Parameters
Account Detail:
   User Rights: Admin
   User Account Control: Undefined
   Process Integrity: Undefined
   Profile Type: None
Acrobat Detail:
   Sandboxing: Off
   Captive Reader: No
   Multi-Reader on Desktop Support: Off
Available Physical Memory: 530036 KB
Available Virtual Memory: 1993360 KB
BIOS Version: OQO    - fe60019
Default Browser:
Default Mail: Microsoft Office Outlook
    mapi32.dll
    Version: 1.0.2536.0 (XPClient.010817-1148)
Display Detail:
   Screen Width: 800
   Screen Height: 480
   Number of Monitors: 1
   Number of Mouse Buttons: 8
   Has Mouse Wheel: Yes
   Has Pen Windows: No
   Double Byte Character Set: No
   Has Input Method Editor: Yes
   Inside Screen Reader: No
Graphics Card: VIA/S3G UniChrome Pro II IGP
    Version: 6.14.10.385
    Check: Not Supported
Installed Acrobat: C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
    Version: 11.0.0.379
    Creation Date: 2012/09/23
    Creation Time: 8:43:44 PM
Locale: English (Australia)
Monitor:
    Name: VIA/S3G UniChrome Pro II IGP
    Resolution: 800 x 480 x 60
    Bits per pixel: 32
OS Manufacturer: Microsoft Corporation
OS Name: Microsoft Windows XP Professional
OS Version: 5.1.2600 Service Pack 3
Page File Space: 2203236 KB
Processor: x86 Family 6 Model 10 Stepping 9 CentaurHauls ~1496 Mhz
Session Detail:
   Boot Type: Normal
   Is Shutting Down: No
   Network: Available
   Inside Citrix: No
   Inside VMWare: No
   Remote Session: No
   Remote Control: No
System Name: YOUR-1561454D88
Temporary Directory: C:\DOCUME~1\OQOuser\LOCALS~1\Temp\
Time Zone: Pacific Standard Time
Total Physical Memory: 911792 KB
Total Virtual Memory: 2097024 KB
User Name: OQOuser
Windows Detail:
   Tablet PC: No
   Starter Edition: No
   Media Center Edition: No
   Slow Machine: No
Windows Directory: C:\WINDOWS
Installed Plug-ins
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\Accessibility.api
    Version: 11.0.0.379
    Creation Date: 2012/09/23
    Creation Time: 8:43:52 PM
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\AcroForm.api
    Version: 11.0.0.379
    Creation Date: 2012/09/23
    Creation Time: 8:43:54 PM
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\Annots.api
    Version: 11.0.0.379
    Creation Date: 2012/09/23
    Creation Time: 8:43:54 PM
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\DigSig.api
    Version: 11.0.0.379
    Creation Date: 2012/09/23
    Creation Time: 8:43:54 PM
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\EScript.api
    Version: 11.0.0.379
    Creation Date: 2012/09/23
    Creation Time: 8:43:52 PM
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\IA32.api
    Version: 11.0.0.379
    Creation Date: 2012/09/23
    Creation Time: 8:43:52 PM
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\PPKLite.api
    Version: 11.0.0.379
    Creation Date: 2012/09/23
    Creation Time: 8:43:54 PM
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\SendMail.api
    Version: 11.0.0.379
    Creation Date: 2012/09/23
    Creation Time: 8:43:54 PM
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\Updater.api
    Version: 11.0.0.379
    Creation Date: 2012/09/23
    Creation Time: 8:43:54 PM
I can easily see 2 matters which an inexperienced support desk staff member could home in on.
Acrobat XI Pro system requirements include
1024x768 screen resolution and
Internet Explorer 7, 8, 9, or 10; Firefox Extended Support Release; Chrome
Well my OQO report above includes
Display Detail:
   Screen Width: 800
   Screen Height: 480
and leaves blank
Default Browser:
(actually Firefox 17.0.1)
Yet 'Firefox Extended Support Release' is described by
Mozilla:
'Who is it not for?
Individual users who always want the latest features, performance enhancements and technologies in their browser without waiting for them to become available in ESR several development cycles later.'
http://www.mozilla.org/en-US/firefox/organizations/
Since starting this post, I loaded Adobe Acrobat XI Pro on another similar computer I own and use regularly. This was in a dock and connected to an external display. Same problems and reports experienced.
'Systems Report' for this installation follows:
Account Detail:
   User Rights: Admin
   User Account Control: Undefined
   Process Integrity: Undefined
   Profile Type: None
Acrobat Detail:
   Sandboxing: Off
   Captive Reader: No
   Multi-Reader on Desktop Support: Off
Available Physical Memory: 614280 KB
Available Virtual Memory: 1988144 KB
BIOS Version: OQO    - fe60019
Default Browser:
Default Mail: Outlook Express
    %ProgramFiles%\Outlook Express\msoe.dll
    Version:
Display Detail:
   Screen Width: 1280
   Screen Height: 1024
   Number of Monitors: 1
   Number of Mouse Buttons: 8
   Has Mouse Wheel: Yes
   Has Pen Windows: No
   Double Byte Character Set: No
   Has Input Method Editor: Yes
   Inside Screen Reader: No
Graphics Card: VIA/S3G UniChrome Pro II IGP
    Version: 6.14.10.358
    Check: Not Supported
Installed Acrobat: C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
    Version: 11.0.0.379
    Creation Date: 2012/09/23
    Creation Time: 20:43:44
Installed Acrobat: C:\Program Files\Adobe\Reader 10.0\Reader\AcroRd32.exe
    Version: 10.1.3.23
    Creation Date: 2012/04/04
    Creation Time: 16:53:54
Locale: English (United Kingdom)
Monitor:
    Name: VIA/S3G UniChrome Pro II IGP
    Resolution: 1280 x 1024 x 60
    Bits per pixel: 32
OS Manufacturer: Microsoft Corporation
OS Name: Microsoft Windows XP Professional
OS Version: 5.1.2600 Service Pack 3
Page File Space: 2006176 KB
Processor: x86 Family 6 Model 13 Stepping 0 CentaurHauls ~1496 Mhz
Session Detail:
   Boot Type: Normal
   Is Shutting Down: No
   Network: Available
   Inside Citrix: No
   Inside VMWare: No
   Remote Session: No
   Remote Control: No
System Name: OKETT143
Temporary Directory: C:\DOCUME~1\oqo\LOCALS~1\Temp\
Time Zone: AUS Eastern Standard Time
Total Physical Memory: 911792 KB
Total Virtual Memory: 2097024 KB
User Name: oqo
Windows Detail:
   Tablet PC: No
   Starter Edition: No
   Media Center Edition: No
   Slow Machine: No
Windows Directory: C:\WINDOWS
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\Accessibility.api
    Version: 11.0.0.379
    Creation Date: 2012/09/23
    Creation Time: 20:43:52
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\Updater.api
    Version: 11.0.0.379
    Creation Date: 2012/09/23
    Creation Time: 20:43:54
(I did not bother installing plug-ins and deactivated installation before removal of program.)
With 5 installs producing the same error reports, I am convinced Acrobat XI Pro won't work for me on my computers and have little confidence of useful support from Adobe.
THERE ARE SO MANY GLARING PROBLEMS WITH MY INSTALLATIONS WITH THE SUPPORT DESK'S RESPOSES UNHELPFUL AND UNINFORMED. I REALLY DON'T ENJOY DOING ADOBE'S QUALITY CONTROL FOR THEM FOR FREE, BUT I CONTINUE TO POST HERE IN THE HOPE THAT SOMEONE WITH REAL AUTHORITY WILL EVENTUALLY TAKE NOTICE AND ARANGE A FIX OF THE PROBLEMS.
15 Dec 2012 1409 local time.
Further feedback provided that 1Ghz memory preferred. Problem not addressed. Reply
Notes from Customer
Friday, December 14, 2012 7:07:57 PM PST
System reports at #12 on http://forums.adobe.com/message/4862987#4862987
Alert- although ordered in Australia from Australian site and paid in Australian dollars by MasterCard, Adobe chose without warning to process this payment through an overseas account incurring an extra foreign transaction charge for me.
Adobe support to date has been of no use and their billing practices unreasonably expensive.

BAPI - Problem in Sales order creation

Hi Friends,
I have problem in Sales order creation using BAPI ,I am getting a messsage - Error in creating document ,I have sent the code along with this mail ,can you help it out.
Code:
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
PARAMETERS: p_auart TYPE auart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Sales organization
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Distribution channel
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Division.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Sold-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Ship-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Material
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
PARAMETERS: p_matnr TYPE matnr   OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Quantity.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Plant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Data declarations.
DATA: v_vbeln            LIKE vbak-vbeln.
DATA: header             LIKE bapisdhead1.
DATA: headerx            LIKE bapisdhead1x.
DATA: item               LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx              LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner            LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return             LIKE bapiret2    OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx   TYPE STANDARD TABLE OF bapischdlx
                         WITH HEADER LINE.
DATA: lt_schedules_in    TYPE STANDARD TABLE OF bapischdl
                         WITH HEADER LINE.
Initialization.
INITIALIZATION.
v_text   = 'Order type'.
v_text1 = 'Sales Org'.
v_text2 = 'Distribution channel'.
v_text3 = 'Division'.
v_text4 = 'Sold-to'.
v_text5 = 'Ship-to'.
v_text6 = 'Material'.
v_text7 = 'Quantity'.
v_text9 = 'Plant'.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant    = p_plant.
itemx-plant   = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty    = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty     = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
       EXPORTING
            sales_header_in     = header
            sales_header_inx    = headerx
       IMPORTING
            salesdocument_ex    = v_vbeln
       TABLES
            return              = return
            sales_items_in      = item
            sales_items_inx     = itemx
            sales_schedules_in = lt_schedules_in
            sales_schedules_inx = lt_schedules_inx
            sales_partners      = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
    EXIT.
ENDLOOP.
IF sy-subrc = 0.
    WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
    COMMIT WORK AND WAIT.
    WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.
Regards,
Dinesh

what messages u are gettting in RETURN ? Please check the RETURN tables data.
[code]CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Regards
Prabhu

Exclude items at billing document creation

Hello everyone,
Our team receive the follow user request: at the moment of billing document creation, exclude all itens from delivery where quantity is igual zero.
What's the best approach, use user-exit at VF01 to exclude all itens with quantity=zero or try to find some customazing (SPRO) to do that?
Are there someone that had the same problem or like that? Is it prossible to do that by customizing?
Thanks!
Flávio

You should be able to do it using config. Follow the path
Implementation Guide for R/3 Customizing (IMG)
-->Sales and Distribution
   -->Billing
      -->Billing Documents
         -->Maintain Copying Control For Billing Documents
            -->Copying control: Delivery document to billing document
Here select your source delivery type and the target invoice type. Then click on 'item'. Select the appropriate item categories and do a display. You can play with the settings there to exclude the items that you don't want in the invoice. If nothing from standard settings work for you, you can still use the 'copying requirements' field to enter your own requirement there.
Srinivas

Authorization for Measuring document creation

Hi,
i have one issue. I want to provide authorization for measuring documents creation. That has been done by providing the different authorization groups in roles for T codes IK11, Ik12 etc to the users. Now users with a authorized authorization group for perticular measuring point can create a measuring document fo that. But the problem is that despite the authorization group, if user goes to t code iw41 for order confirmation , there he can create measuring documents of any authoprization group. How to control that thing. I also give authorization group authorization for t code IW41 but still it is allowing for the creation of documents. any help on this thing.
Regards,
Aman Sharma

Hi
there are two ways you can control the measurement reading entry
1. Block the authorisation of IK11.When you go to confirmation screen through IW41 , there a button for measurement document update. Even the user will press it system will not allowed to enter in it as he is no authorisation
2.You can configure the screen template for overall confirmation and use this profile while doing overall confirmation using iw42. There you can hide the measurment detail screen.
customising node " Set Screen Templates for Completion Confirmation "
Regards
Amar

There was a problem reading this document (117)

Dear Designers
I am facing a strange problem while doing test presentment in Adobe output designer. When i do a test presentment with my dat file which is meant for fax (^job newFax -fform01F.MDF) , i see the pdf (consist of 2 pages ) but as soon as i scroll down to next page (Pg 2) of my pdf ; it giving me a Adobe reader error pop up "There was a problem reading this document (117)" and when i click OK and comes to page 2 (i'm seeing the content of Pg2 curerntly) and scroll back to page 1 the data on page 2 goes blank. What could be the possible reason for this ? I assume the flaw is on Adobe reader side , but please brighten me with the knowledge if there is some issue on dat file side.
Any possible guidance or help would be highly appreciated
thanks
jaY

Sorry, I do not quite understand what your problem is:
you have a problem with signing in to the ExportPDF service ?
you have a problem opening PDF files ? If so, are these local or online documents?
P.S. Reader XI and earlier will no longer support Document Cloud PDF services as of May 20; see https://forums.adobe.com/docs/DOC-5891

THE FAMOUS ERROR: There was a problem reading this document (15) - Thanks Adobe Engineering team

As a result of this error, I cannot delete pages in a big PDF file I have of 1032 pages.
The error, famous on the web and in Google, is:
there was a problem reading this document (15)
I hope I can find a solution for this, because I cannot delete the unnecessary pages inside the document which is driving me crazy.
Adobe Acrobat X has a very poor quality testing. In fact I don't beleive Adobe test their products, I think they just program them, label them as the finished product, ASK FOR A HIGH PRICE, OF COURSE, and release them to the market creating a lot of nightmares and headaches to the customer.
Adobe Acrobat X crashed several times when the files have flash content inside or formularies. The program, simply, is bad programmed with a very poor engineering inside.
As soon I find an alternative for PDF, I will switch, I promise, in fact I don't promise it, I SWEAR IT.
And if I dont find a solution for this I will put in my car a banner that says "DON'T BUY ADOBE ACROBAT, IS THE WORST PROGRAM YOU CAN FIND!"
I'm loosing days and days of work, this is costing me problems and money.

Yes, there is something wrong with the document. That is the defective programming the Adobe engineering team did. And please, allow me to explain you why it is defective. After you spend millions dollars in 950 engineers and 3100 beta testers, you can destroy Adobe Acrobat X easily just downloading a website rich in flash content. Some animated banners in the downloaded pages from the web, it's enough to destroy it.
Just go to a website where you have animated banners, and press Shift+Crtl+O to download the pages...
Save your PDF document and then try to work with it.
If the document has a big size, let's say 1000 pages approximately, and many of them have flash content... Adobe Acrobat X crash automatically just moving from one page to another.
As simple as that.
Is the most unstable program I've seen in all my life. And please, don't tell me it's my machine, because I've tested it in other computers. The same!
But there is more! yes
Forms fields also destroy Acrobat X
In a big PDF file having several pages inside with forms, just go to Tools, Forms and Edit, then in the list of pages try to delete the forms fields selecting them and pressing the Del key... crasshhhh Acrobat X die.
What kind of betatesters you chose to test your products? For sure are people that are working with light documents of 5... 10 pages and no more.
For sure are not people working extensively with Adobe Acrobat, as I do.
And what happens when Acrobat X crash miserably time after time? that the Error 15 comes, because the file becomes corrupted.
This is not serious.
Is this the kind of performance and stability that Acrobat provide to the customers? having the risk to lose important documents and data, due how unstable is the program?
You can tell me you hired NASA personnel to do this program, but customers need results, and crashing the program just pressing one key is not serious.
And talking about complains I don't want to remember the last update of the Acrobat 9 !!!
And you know what? a simple tool as NitroPDF don't crash!
Sadly NitroPDF is not an option for me, because I embed videos in the PDF documents and NitroPDF don't allow me that.
I am using Adobe Acrobat X because sadly I don't find another alternative, the day I find it, I'll switch for sure.
Or perhaps we can get a miracle, and your programmers could focus in what is IMPORTANT: STABILITY AND PERFORMANCE.

Error message: There was an error processing a page. There was a problem reading this document (110)

I opened a pdf document in Adobe Reader X. When I attempted to scroll through the pages the following error message appeared, “There was an error processing a page. There was a problem reading the document (110). After an Internet search to try to find the reason for the error and a solution, I came across a site that suggested it was an issue regarding the fonts of the document. I then reopened the document and went into the document’s font properties (FILE – PROPERTIES – FONTS tab). There I noticed that the “Gathering font information” stopped at 2% which, of course, I took to mean that Adobe Reader X was having a difficult time in loading the font’s information. Another site suggested opening the document in the pdf reader, Foxit. So I did, and the document loaded properly with no error messages. I was still curious as to why the document did not load entirely in Adobe Reader X and if the same problem would occur using a different reader. I then downloaded the pdf reader, Nitro Reader 2. I opened the same document and initially received the following message, “The requested page number is invalid and does not exist in this document.” I closed the message and proceeded to scroll through the document. As I scrolled, the following message appeared, “This file was damaged (corrupted) and has been repaired.” I thought, “Wonderful!” I then chose <FILE – SAVE AS – PDF DOCUMENT> and saved the “repaired” document under a new name. When I opened the “repaired” document with Adobe Reader X, behold, the document opened entirely with no error message. I was curious, so I went into the document’s font properties and noticed, this time around, that the “Gathering font information” loaded to 100%. Nitro Reader 2 detected the error and fixed it. Now I’m left to wonder…why wasn’t Adobe Reader X able to do the same? I hope this post helps others who are experiencing the same issue.

When I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
Read below:
1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
1.2. No document security was applied of any sort on the file.
1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
1.13. Sorry for so lengthy instructions, but I had no choice.

There was a problem reading this document (109) on Japanese PC

We have an app written with Delphi 2006 and using Rave Reports to generate PDFs. A Japanese user of our software cannot open the PDFs (with Acrobat reader) our software produces when they run our software on a Japanese version of Windows (probably Win7). I have the same problem if I try to open the same PDF (which they have sent us) with Acrobat reader on an English-language Win XP machine :
There was an error processing a page. There was a problem reading this document (109)..
Ctrl-OK produces "object label badly formatted"
PDF files produced on English installations of our software read fine on our PCs and on the Japanese user's PC
Does anyone have any idea where this error is coming from?
Thanks,
Ross

Hi Pat,
Thanks for looking at this.
Yes, there are almost certainly Japanese characters. If you look at the second (readable) version I sent you can see where part of the date has been rendered incorrectly - this is because they have their regional settings arranged so that the Japanese year character is used, and the version of Delphi we use doesn't support those multibyte characters.
It seems unreasonable for Acrobat Reader to choke on this however.
Here'a binary dump of the relevant part of the file

Error message "There was an error processing the page.there was a problem reading this document(109)

Getting an error message when viewing the pdf report by using Adobe reader "There was an error processing the page.there was a problem reading this document(109)"

Hi,
We are using Active reports tool to generate the PDF document, And the
server is Windows 2003, and it is online document which generates
dynamically
We are facing the below error message when we try to generate, and my
local machine having Adobe Reader 7.0
Please find the screen shot below for the error message, Thank you for you
help in advance.
Thanks and Regards
Inayath Nalgar

Issue when scrolling a pdf - There was a problem reading this document (135)

This is when the PDF is created and rendered/previewed from Acrobat Reader and the issue is there for latest acrobat version too.
When you open the PDF in Acrobat Reader and then when you scroll it and if you have more that one page in the PDF, it gives an error saying "There was a problem reading this document (135)".
Is this a known issue in Acobat? Any resolution? Reinstalling acrobat version didn't help.
Thank you in advance...!
/Manu

It's hard to tell for me as they are files such bank statement or other document from websites...how can i know?
Thanks,
Date: Wed, 9 May 2012 01:29:45 -0600
From: [email protected]
To: [email protected]
Subject: Issue when scrolling a pdf - There was a problem reading this document (135)
    Re: Issue when scrolling a pdf - There was a problem reading this document (135)
    created by Nikhil.Gupta in Adobe Reader - View the full discussion
Hi Manulak_Tech,
As you are able to view PDF I had provided, the issue seems to be PDF specific.
So when you scroll the PDF and reach to a page where Adobe Reader cannot read it, the error comes. I am sure the problem lies the way PDF was created. Can you describe how the PDF was created?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4390058#4390058
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4390058#4390058. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem in ARE 1 Document creation

Similar Messages

Maybe you are looking for