Problem in assets at the time of upload

Hi All
I have a problem. In the month of Feb. 2009 we went for upload of assets from our previous company code to new company code..
All the assets were uploaded through FB01( manually).
The asset report got tallied with the GL balances in March 2009.
But now problem arises with 4 assets that were uploaded in Feb . with other assets.. These 4 assets are the differences for the reconcilation in GL balances for the quarter closing June 2009. October 2009 and December 2009 with balance sheet balances( FS10N).
There is no depreciation deducted for these assets in the quarter ending June , Sept and dec. depreciation run... even the planned depreciation is not calculated in the asset history........
The balances coming in the reports are ZERO for these four assets while there is actual balances in BALANCE SHEET for these assets........
Please help me and guide me to know how these assets can be picked up by the asset report further ho wdepreciation will be deducted on these assets........
Regards
Ruby

HI,
i feel the depreciation key assigned to the master data must have been played about .... i suggest you to chek the customization for the depn key .
regards
sayeed

Similar Messages

Maintaining the systems status as release at the time of upload

Dear all,
While uploading the master data for Business Entity and Buildings I want to make the system status as release. How do we achieve this?
Also at the time uploading the contracts I want to make the system status of the contract as active. How can we do this at the time of upload.
Expertu2019s pointers are highly appreciated.
Regards.
Vara Prasad

Hi Vara,
I guess you are using the API_RE_* function modules for uploading the data. You can use these
APIs also to set the system status. You have to set the parameter ID_TRANS and provide the activity that sets the status (example: for system status "released" the activity BFRE, for activation of contracts the activity is MCAK).
I hope this information is helpful for you.
Regards, Franz

I had purchased a apple iphone 4 on dated 18/08/2011 from MOBILE MALL shop no. 15,sector-35-c,Chandigarh vide bill no.7278, dated 18/08/2011 by cash in rs.34500.00. Now the problem is most of the time its home button does

I had purchased a apple iphone 4 on dated 18/08/2011 from MOBILE MALL shop no. 15,sector-35-c,Chandigarh vide bill no.7278, dated 18/08/2011 by cash in rs.34500.00.
Now the problem is most of the time its home button does not work,i have to press it 40 to 50 time then it respond,and the same time no other application running,yours is a well known brand and in mobile phone you are no one.
So,you are requested to solve my problem at the earliest .
<Edited By Host>

This is a user to user forum: you are not speaking to Apple. If you bought it new, it is still (just) under warranty. Take the matter up with the shop where you bought it or directly with Apple to see if it is eligible for a replacement. If it decided the problem does not come under the warranty, you should be able to buy an out of warranty replacement phone. The US price is $149, I do not know the price in India.

HT5361 Today, I experienced a problem with my mail. the time and date on each email received and sent is 18-06 and the date is 22nd July irrespective of the actual time

Today, I experienced a problem with my mail. the time and date on each email received and sent is 18.06 and date as 22nd July. Thank you John

Incorrect date or time displayed in various applications

Problem during the assets entryat the time of service sheet

Sir,
I will face the problem at the time of services sheet as per following information.
Actuaally i implemented the busi. area as Dealer I Want capitalized that bur at the time of entery the
the service sheet i faced the problem.
problem:
you cant post to this assets( Assets180 0blocked for acuisistions)
procedure remove tha blocked indicator in the master record or post diff. assets
regardinng this procedure i wnat to detail procedure or doc.

done by call sercvice center facility

Locking problem in VL02N at the time Post Goods issue

Hi,
We have implemented 2 BADIs to change qty in delivery and in subsequent documents. Once we receive an IDoc with batches, then we need to change subitems qty according to no of batches.
Once IDoc has updated, then PGI will do automatically.
1. LE_SHP_DELIVERY_PROC - Change qty in delivery (Method SAVE_DOCUMENT_PREPARE)
2. LE_SHP_GOODSMOVEMENT - Change qty in material document.
Now, we have a locking problem at the time of posting.
Please let us know, due to these BADI implementation this problem or any other cause? And provide required to solve this problem.

hi ,
do i need to do step 2....?
i dont think u need step2 ( change qty of MBLNR),bcos ,
say ur Del.qty is 100, now u want to do del. of 50, then just u will change its qty & do PGI ? so whats the need of changing MBLNR.
while doing PGI , program will take changed qty of del. only ?
let me know if i'm wrong.
regards
Prabhu

Automatic creation AUC sub assets at the time of settlement

Hi,
I have created the investment profile,AUC asset class,Source structuce(Hard,Pave and Soft) and cost element group(Hard,Pave and soft) . Then assign these three source structure to Investment profile.
I created WBS element under project and released the WBS.
After that I posted the values against the WBS different cost element . At the time of AUC seetlement thru CJ88.I am getting Three AUC asset with Sub number -0(1000-0,1001-0 and 1002-0) automaticaly. But Business is expecting to settle automatically(1000-0(Hard),1000-1(Pave),1000-2(Soft) respectively.
Is there any way to settle AUC sub asset wise(Eg: 1000-0, 1000-1 ans 1000-2)automatically.
Please share your suggestion on this.
Appreciate your help!
Regards,
Prakash Reddy.

Hello VIrendra,
I am trying to settle WBS to AUC settlement thru CJ88. In this case We need to settle WBS to AUC sub number wise 0,1 and 2 respectively based on the cost element. Is there any settings required to create AUC asset sub number wise creation?
Thanks& Regards,
Prakash Reddy.

I have a problem with bookmarks, all the time when I start Firefox the bookmarks is deleted, or not there. And I need to import them again and again, also the cookies, cash are deleted.

The bookmarks, cookies, history all the time are deleted when I start Firefox and I need to import them all the time.
I have version 3.6.12

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
See:
* http://kb.mozillazine.org/Bookmarks_not_saved
* http://kb.mozillazine.org/Locked_or_damaged_places.sqlite

Problems comes on at the time of booting

Dear sir , my mobile model is 3230 nokia , I am pressing the power ON button then mobile booting but restarts some times again . Not bootig completly.
Solved!
Go to Solution.

It's either a hardware failure or software problem. Try booting the phone without the memory or sim card in.
If it still won't boot you will need to hard reset your phone but this will unfortunately wipe all of your data and installed programs from the phones memory.
Hard reset:
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
3. While holding these buttons, hold the power button for a second to switch on the phone.
4. Release when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
It may take a few attempts and very flexible fingers!
If it still doesn't work you will need to visit a nokia care point to get it repaired.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.

Problem in VAT Calculation @ the time of MIRO

Dear All,
We are using the Tax Procedure TAXINN.
When we create a LIV document with ref to a PO using the transaction MIRO & when I check the calculate tax button, the tax amount which is displayed in the Basic data is more than the amount which is displayed in the taxes tab.
For Ex:
Created a PO with the following details.
Total Qty in PO - 10
Base Price - 1000/qty.
BED - 14% - 1400.00
ECS - 2% - 28.00
VAT - 4% - (4% on 11428) - 457.12
So my total Tax = 1885.12 (Including Excise & VAT).
Now when I create a MIRO document the tax amount which gets calculated when I check the Calculate button is 1885.12 (Same as above) in the Taxes tab of MIRO.
But the tax amount which is displayed in the Basic data tab is 1,942.24
Also when I simulated the MIRO entrys the VAT amount which was simulated was - 514.24 & not 457.12 as in PO.
Can anyone please advice on the reason for this mismatch in VAT calculation during the time of MIRO?
Is there any specific settings for VAT in TAXINN ??
Note :
The Excise & VAT are calculated correctly during the time of PO creation. Also I havent maintained any additional VAT condition types for my VAT in the tax procedure.
Awaiting helpful replies.
Regards,
Edited by: SAP FC on Dec 5, 2008 3:44 PM

Hi All,
Please note that when I removed the VAT condition type JVRD from the Classify condition types settings in IMG then the VAT amount which is calculated in the Basic data tab of MIRO is equal to the actual Tax amount as in PO (Excise + VAT ), but the amount which is displayed in the tax tab of MIRO is less.
Now if I maintain the Classify condition types settings in IMG for my VAT condtn type JVRD then the VAT amount which is calculated in basic data is more than both the PO as well as tax tab in MIRO.
Please note as you all have suggested I tried this after creating a new material & with the newly maintained condition records in FV11.
But still the issue persists..
If anyone have any idea. plz revert.
Regards,
Edited by: SAP FC on Dec 9, 2008 10:23 AM

How to validate image at the time of uploading image in BSP page

hi
I have created a BSp page in which i have created attachment option with browse button , so please tel me that how to validate at the time of clicking save button , attachment should me image (jpeg,gif)
thanks

To provide f4 help for the input field, we have to add showHelp and onValueHelp attributes to the inputField tag. Provide the values to those attributes as shown below.
You need to check after transferring the value fo object if the object contains .jepg then return = true else return = false and call the error page and display the error message 'choose only the .jepg image' and on the error page also give the button to return to the previous page.
hope this will help u.

Problem In MIRO at the time of bill of entry

Hi,
I am facing a problem while doing bill of entry for an A/c assigned (Asset) PO in MIRO. When i am simulating, i noticed that Asset transaction G/l is getting debited instad of cenvat clearing A/c for all Duties for which credit to be taken.
But if i am deselecting the GR Non-Valuated tick in PO (In delivery tab), then system showing the Cenvat clearing A/c being debited while simulating .
Can anyone clear me in details what is the procedure to be follow for A/C Assigned PO (for Asset) from a import vendor and what is the impotrance of selecting GR Non-Valuated in PO.
Thanks
Prasant
Edited by: prasant sekhar on May 14, 2009 6:42 PM
Edited by: prasant sekhar on Aug 24, 2009 5:24 PM
Edited by: prasant sekhar on Aug 24, 2009 5:26 PM

HI,
i feel the depreciation key assigned to the master data must have been played about .... i suggest you to chek the customization for the depn key .
regards
sayeed

Nothing but problems since we purchased the Time Capsule

I must admit I was very eager to purchase the TC and replace our aging Airport Base Station (the ufo shaped one)
However at the worst under the old base station it would lock up once a week and need a reset. The TC (even without using the HD because I gave up on that early on) it is way slower than the old one and seems to lock up at least once an hour. I have tried everything I know to make this thing not lock up on us so often. At first I was convinced that this thing was overheating... (No vents on it apple???)
I tried the obvious and have it up off the desktop and away from everything possible to give it plenty of room to dissipate the ton of heat this thing seems to generate. Its running cooler now but it is still locking up? OR slowing down to an absolute crawl on the wifi before reseting the thing brings it back to some semblance of working again.
The hard-drive is blank - wiped clean after the three failed attempts at using it for a backup hard drive. (Wired or wifi) All i ended up with was the sparse bundle that seems to be useless.
At this point all we are even trying to use this thing for is a wifi hub at this point and its failing at that!
Apple? What do I do? Return it? Can I get my money back on it?
Its near useless!
(Die hard Apple fan - very disappointed in Leopard (see other posts) and Time Capsule)
Release an update? Please? Or tell me I can swap this for something that works? Was there faulty hardware?
Hello? Anyone?

dude, my sympathies. I hate mine for the same reasons. Whenever TC tries to make a backup, I get a message saying the connection was interrupted. Consequently, it drags down my internet connection with it and all that will work is a hard reset. I don't really don't see how this renders time machine functional, supposedly working in the background; yeah right.
I think this problem is as serious as a Mac without a functional mouse or keyboard.

Automatic creation of AUC (CWIP Asset) at the time of creation of IO

Hello Gurus,
When iam creating an investment internal order, system is not creating AUC(CWIP Asset), I have created investment profile and entered the same in internal order, what could be the reason for this.
Please let me know the missing configuration.
Thanks & Regards,
Kapoor

Have you made the following settings:
Investment profile:
Sim. asset class xxxx
Indent value
OAYZ Determine Depreciation Areas in the Asset Class assigned the default value to the asset clas for AUC.
In the most cases the AUC is created when you release the internal order

Hi Experts..i have a problem regarding BAPI at the time of creating the structure.

When i create the structure for particular field it will display the message "Field name VBELN does not agree with proposed name SD_DOC for BAPI table".
Kindly help me.
Regards,
Abhishek K.

Hello Raymond,
I had problem of creating structure for BAPI Now it is Solved .
And Yes i have created RFC Function Module.
But i get some problem during Activation.
Could you help me on this?
Code:->
FUNCTION ZBAPI_DEMO_SD.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(FM_VBELN) TYPE VBAP-VBELN
*" EXPORTING
*"     VALUE(RETURN) TYPE BAPIRETURN
*" TABLES
*"      ZITEMDATA STRUCTURE ZBAPI_TABLE OPTIONAL
SELECT POSNR
         MATNR
         MATKL
         PSTYV
         MEINS FROM VBAP INTO TABLE ZITEMDATA
    WHERE VBELN = FM_VBELN.
ENDFUNCTION.
Error: ->"Report/Program statement Missing or Program type is I (Include)".
Regards,
Abhishek K.

Problem in assets at the time of upload

Similar Messages

Maybe you are looking for