Problem in assign the delivery type to the existing output type

Hi
There is a problem in assinging the existing Output type to the delivery type.
In, NACE i have maintained the output type for the procedure and also through VV21 i have created the condition type with the combination of shipping point/delivery type.
But system automatically not determining the output type when we create the outbound delivery. This output type is to trigger the EDI in terns..
Can any one guide me what are the setting to be done for the same?
Edited by: V. Mariappan on Jul 5, 2009 12:40 PM

Hi,
Check whether you have maintained the condition records for output for the above combination & also the Print device in the Communication tab & Print immediately settings.
If you haven't maintained the above, do the same & check.
Thanks & Regards,

Similar Messages

Urgent-change the end date for a existing wage type.

Hi,
Can u pls let us know how to change the end date for a existing wage type.
The current end date is 30.8.2008 and we would like to change to 31.12.9999.
Rgds,

Use This report RPCLGV00
The Wage Type Distribution report enables you to display wage types for several payroll periods. It does not take into consideration differences resulting from retroactive payroll. The report shows the current values (number and amount) for each wage type. The report evaluates the payroll records that are marked with update indicator A when the report is run. Subsequent reporting runs may not give the same result if - in the intervening period - retroactive payroll has taken place for the evaluation period. The wage type distribution uses the data from the results table RT for the relevant payroll result. The employees organizational assignment is also evaluated from the payroll result. This data is taken from the Work Center Basic Pay table (WPBP).
The wage type distribution offers you the following options for evaluation:
Individual reporting for a specific personnel number or name.
Totals evaluation without specifying a personnel number or name.
You cannot use wage type distribution to run a report for several countries. You can only select payroll areas from one country for reporting.
Scope of Function
You use the following parameters to determine how the appearance of the wage type statement:
Wage type for evaluation
Enter all wage types that are to be evaluated. If you do not make an entry here, the system selects all wage types. Note that you can only select wage types that occur in the RT table.
Evaluation start date
Evaluation start date and evaluation end date define the evaluation period. Enter the year and payroll period for the start of the evaluation.
Evaluation end date
This parameter delimits the evaluation period. If you do not make an entry here, only the period from the period from the parameter Evaluation start date is evaluated.

Error!! Can not find the delivery details for the delivery Id :

hi all,
I have a report which i need to burst in seven different reports wherein my delivery key is column "emp_id". Now when i schedule the report to burst then the report completes with a warning. I see that there are various delivery cycles for the report and for one of the cycles i get the following message
Error!! Can not find the delivery details for the delivery Id :
hence, what happens due to this is, even there are successful deliveries for other delivery ids but then i get only two rows of data in each of the seven bursted ouput xls files. wheareas the data runs in thousands of rows for each cycle.
Hence whats happening is, that due to error /warning in one of the delivery cycles other reports are also not showing data.
I am not sure whats causing the issue and why i am not getting complete bursted files out.
Please suggest
Thanks
Ronny

I guess, you are in 10.1.3.3.2 :),
in the latest release 10.1.3.4.1, there are more enhancement wrto bursting and performance i believe.
check th release notes
can you send me the xml and bursting query you have, i can try simulating in my local.

Error: 28005, Severity: 16, State: 2...An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impe

I've seen some similar questions, but want to make sure I can get an answer quickly and how to fix.
Thanks,
Paul
spid24s Error: 28005, Severity: 16, State: 2
spid24s An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impersonated,
or you do not have permission.

Hi Paul,
I also had the same error on one of my servers, and it was because the user that created the database no longer worked for the company.
So when his AD account got deleted, the database had NULL as owner
Using the following query I asked for the owners of the databases:
select name, suser_sname(sid) from master.dbo.sysdatabases
So changing the owner of the databases that had a NULL owner solved the issue for me.
use <databasesname>
go
exec sp_changedbowner 'sa'
Thanks for triggering the solution.
Peter

Block GR if GR date before the delivery date in the PO

Dear all,
A key-user would like to avoid goods receipts to be posted if the date of the goods receipts is before the delivery date in the PO. The key-user wants to refuse systematically delivery from the supplier which is sooner than the delivery date in the PO.
For example, in the PO, the delivery date is August 7th 2010. To make a GR for this PO, the user uses MIGO, inputs the PO. As today is August 5th 2010, the GR should not be accepted by the system. How to customize that?
Another solution is to display the delivery date of the PO in MIGO so that the storehouse person can check directly the date of the delivery in the PO. That way, this person can check by itself whether the GR should be done or not.
Thanks a lot.
Olivier

Hi
This is standard SAP Customization.You an set message as Warning or Error message .
The customization path is MM-Purchasing-Environment Data-Define attributes of system messages.
Please let me know if it helps.
Regards

Why the delivery date is the same date as 'transptn plan date" & loading date' & ' good issue' & GR end date'

Hi Experts,
why the delivery date is the same date as ‘transptn plan date” & loading date’ & ‘ good issue’ & GR end date’.
in shipping tab i can see Planned Deliv. Time 170 Days ... wat could be the reason.
Many Thanks:
Raj Kashyap

Hi Jurgen,,
Thanks for quick reply!!
But i didnot find any things like that .. what could be the customizing .. and we are using GATP from APO side.
\Raj Kashyap

How to cancel the second ATP after changing the delivery date in the SO

Hello,
our solution creates automaticly a production order accorting to sales order.
The system calcule ATP for each items at the creation of the sale order.
Sometime, we change the delivery date on the scheduled line and SAP do another ATP. If the composants are not available we get an TSUP status on the order production.
How can we cancel the second ATP ?
Is it possible to cancel it when we change delivery date ?
Thanks
Regards
Pierre

I think its not possible to skip the atp during change of the sales order. All these determinations will trigger before saving the order
regards,
Ramana

Updating the delivery document once the picking is done :

Hi Iam designing a custom screen,
Here i have a icon for automatic picking, should be a check box for that, if it is once checked all the lines items in the transaction should be automatically picked as of the delivery quantity.(The delivery quantity should be copied automatically in picking column if auto Picking is selected).
     Once the picking is done, and hit SAVE, then the data should be updated automatically to delivery document, all the picking quantities should be copied to delivery document for those concerned line item. The picking quantity should update field LIPSD-PIKMG, in delivery picking tab.
Please advice how we can achieve this.
Edited by: vinay raj on Jun 19, 2009 12:52 PM

yes iam using the same function module.
But for some reasons this function module is not updating the delivery document.
Any suggestions.
iam writing the code like this :
LOOP AT IT_PICK.
    hvbpok-vbeln_vl = it_pick-vbeln.----
delivery number
    hvbpok-posnr_vl = it_pick-posnr.----
delivery item
    hvbpok-posnn = it_pick-posnr.----
i have doubt here
    hvbpok-vbeln = it_pick-vgbel.----
doubt here.
    hvbpok-vbtyp_n = 'Q'.
    hvbpok-ndifm = 0.
    hvbpok-taqui = ' '.
    hvbpok-charg = it_pick-charg.
    hvbpok-matnr = it_pick-matnr.
    hvbpok-lfimg = it_pick-lfimg.
    hvbpok-pikmg = it_pick-PICQTY.----
picking quantity
    hvbpok-brgew = it_pick-brgew.
    hvbpok-gewei = tvblkp-gewei.
    hvbpok-volum = tvblkp-volum.
    hvbpok-voleh = tvblkp-voleh.
    hvbpok-orpos = 0.
    APPEND hvbpok.
ENDLOOP.
VBKOK-KZLSP = 'X'.
*insert default value for test
VBKOK-VBELN_VL = l_vbeln.----
Delivery number.
BREAK SKUMAR.
CALL FUNCTION 'SD_DELIVERY_UPDATE_PICKING'
    EXPORTING
      VBKOK_WA                     = vbkok
      NICHT_SPERREN                = 'X'
      AUFRUFER_T                   = 'X'
    TABLES
      VBPOK_TAB                    = hvbpok.
IF SY-SUBRC EQ 0.
    COMMIT WORK.
Edited by: vinay raj on Jun 23, 2009 6:58 AM

How to get the delivery number for the sales order

hi
how to get the delivery number for the sales order

Hi,
1. IN VA03, enter the sales order and click on the document flow button. From there you can check the delivery document.
2. In SE11, enter VBFA(Document flow) table and enter the sales order in VBELV field and in VBTYP_N field enter 'J' to specify that you want to check if there is already a delivery document for that sales order.
Hope it helps...
P.S. Please award points if it helps...

Recently I moved from Spain to Australia, how can I change the delivery country of the photo albums?

Recently i moved from Spain to Australia, how can I change the delivery country of the photo albums?
I tried to change all my country information in my apple id but when I'm going to pay the photo album in iphoto 11 only can change the addres but not the country.
thanks.

iPhoto Menu -> Preferences -> Advanced
Bottom of the page you can choose your Print Store
Regards
TD

Steps to assign new key combination to existing output type

Hi,
Can anyone share details about how to create a new key combination for existing output type.
Regards,
Dharmesh

Dear Dharmesh,
Go to:
IMG - Sales and Distribution - Basic Functions - Output Control - Output Determination - Output Determination Using the Condition Technique - Maintain Output Determination for Sales Activities - Maintain Condition Tables -
Maintain output condition table for sales activities
Click on 'Condition" from the Menu Bar. Then select "Create" from drop down menu.
Give a Table Number & press Enter.
Here select the required Feild from Feild Catalogue & Click on Generate.
Then goto:
IMG - Sales and Distribution - Basic Functions - Output Control - Output Determination - Output Determination Using the Condition Technique - Maintain Output Determination for Sales Activities - Maintain Access Sequences
Here Click on the required Access Sequence & then click on "Accesses' on the right side. Here you can assign the newly created Condition Table at required level (10, 20, 30 etc)...
Sebsequently try maintaing condition record & you will see the new Key Combination appearing.
Hope this helps.. .
Thanks,
Jignesh Mehta

Idoc type used for an output type

Hi experts,
How do I find the Idoc structure used by an output type.
When i look in nace it only shows the program name as RSNASTED and form routine as EDI_PROCESSING.
Thanks,
Raghu.

I guess i have to explain the whole problem.
We are trying to eliminate a couple of items from going down to 4 output types of which 3 of them are using EDI.
So I think we should eliminate them from being populated in the line items of each IDOC.
i.e) each basic type/ extension whichever it uses.
Does it make sense?
if not please advice, I am new to EDI.
Thanks and regards,
Raghu

Accessing the run time data of processed output types in VA02

Hello All,
I have to write a code to make entriesin the Ztable when the user processes the output tpe in the VA02 transaction. How I can know that user has attached a new output type for that order?
I am writing my code at the save button of the VA02 tcode in the exit: userexit_save_document.
I checked for the Xnast, ynast, inast entries. But none of them store the current data of the processing of output types screens.
Please help.,
Thanks in advance
Rgds,
Madhuri

data :it_xnast like vnast OCCURS 20 WITH HEADER LINE,
        it_x1nast like vnast OCCURS 20 WITH HEADER LINE.
field-symbols :
            <Fs1> type ZSDTT_VNAST,<Fs2> type ZSDTT_VNAST .
data: wa_xnast type vnast, wa_x1nast type vnast.
         assign ('(SAPLV61B)XNAST[]') TO <fs2>.
         assign ('(SAPLV61B)VNAST[]') TO <fs1>.

The delivery date for the PR needs to consider planning Calender Periods

Hi Friends,
Please help me in solving in my scenario given below:
The Planning calender periods are from Monday through Thursday(No Friday and weekends). When there is a Purchase Requisition (PR) planned date on Monday and the GR processing time is one day. The delivery date should be on the before Thursday (Becasue there is no period on Friday).
But, the delivery date is being created with the before Friday, which shouldn't happen.(Requirement is that Delivery date shouldn't consider that friday, hence, the delivery date needs to be on Thursday).
NOTE: The lot size settings are Lot sizing Procedure : P(Period lot sizing procedure), Lot-size indicator: K (Period lot size as in Planning Calender), Scheduling : 1 (Period Start = Delivery date).
Thanks for helping me in advance,
Surendra Chakka

Hi Santosh,
Thanks for your Questions. Below are the explainations:
1. Can you expalin how your system is behaving at the moment?
A. Presently the GR Processing time is 1 day for a material in Plant. So, if the user wants to produce on Wednesday (Planned date in PR, provided by the MRP run), then the delivery should be on Tuesday (Because GR processing time is 1 day). In the same way, he dont wants the delivery to be on Friday. I mean, if he wants to produce on Monday, he wants the delivery to be on Thursday.
Only Friday, he don't wants to make the Delivery.(The delivery date should not show Friday in PR's).
2. Pls explain your original MRP view and planning calendor setting...
A. For solving of the above issue, we changed the Lot size to copy of "PK" - Period lot size acc to planniong calendar. Then we maintained the Planning calendar, in which the periods are for every Monday, tuesday, wednesday and thursday. Expecting, the delivery should be excluded for friday, the friday in the planning calendar is not given as a period.
The scheduling paramter in the Lotsize is tried with both the options (period start = Deliery date and period end = Delivery date).
Later removed "PD" in MRP type and tried with "R1" Time phase req. But, the precondition for this is to maintain "Forecast req". This is also done. But, then, the system for this material is not responding to the MRP run. It is asking to run the forecast model. We ar not using SOP.
3. The results thst you get with current setting?
A. For the planned date in PR of Monday, the delivery date in PR is on the day before monday. i.e., Friday (Saturday and sundays are holidays).
4. Expected results...?
A. For the planned date in PR of Monday, the delivery date in PR should be Thursday (the day before monday production).
Hope, i am clear in my explaination. Please revert back, if you need any more information.
Thanks and Regards
Surendra Chakka

Why the delivery date in the order not changing with P.O???

Hi All,
I am encountered with an issue that in a P.O the delivery dates are kept as customer requested delvery date and these cahnges are not updating in the order.
According to standard SAP the change in delivery dates in a P.O should get updated in sales order.But its not happening if we keep this date as customer requested delivery date,Why is it so?
I would explain with an example so that it would be clear:
An order is created say 03/31/2011 and the requested delivery date is 05/02/2011.
Confirm delivery date is 05/10/2011 (because in purchase info record it is 40 days)
Now when P.O is created this confirm delivery dates will come.If we change these dates to any other dates it would replicate in the order.But if we keep these dates as customer requested delivery date, it is not changing in the order.
Please any one help me out....
Regards & thanks.
Edited by: deepak567 on Mar 31, 2011 7:50 PM

Dear,
Please check the timing in work scheduling view. other wise schedule the routing and maintain time there and check your result.
In material Master MRP2 screen you will get Scheduling Screen where you will get
In-house production
GR processing time
Plnd delivery time
These are lot size independent but value in work scheduling view are lot size dependent.
Go to VOV8 and check the Lead time part. If u will maintain lead time of 2 days, the req deliverty date will be 2 days frm order creation date.
You can configure this in the configuration of the Sales document type in VOV8. Here we can specify the value and as per that configuration the date will be defaulted.
Regards,
R.Brahmankar

Problem in assign the delivery type to the existing output type

Similar Messages

Maybe you are looking for