Problem in Assignment

Hello All,
While assigning Company Code to Controlling area. I get following error message.
*Data in company code NT01 is not maintained.
Assignment control requires that the currency, fiscal year variant, and chart of accounts are all maintained in the company code. At least one of these settings is not maintained in company code NT01*
But when I go to company code I didn't find currency, fiscal year variant, and chart of accounts.
Could you please help me in this case.

Dear Naveed
For Company Code currency, you can check in ox02    Datas like Fiscal Year Variant, Currency in Credit Control Area in OB45.
Have you checked in these T.Codes ??
thanks
G. Lakshmipathi

Similar Messages

  • Facing problem of Assigned Value in CJ33

    Hi All,
    I am facinfg a problem with Assigned value shown in CJ33 T code. My Sceneraio is like this.....
    1. I have activated availiblity controll on Released Budget.
    2. I have maintained tolerence limit  only for PR and PO.
    Now My problem is  that I budgeted one of my WBS as INR2000, Same amount is released also. I created a PR  for INR500. The same PR is converted to a Purchase order of INR500.
    Now in CJ33 T code my assigned value is comming as INR1000. Which is not correct for me because i have only used INR500 for my INR2000 budget and i want to use my Remaining INR1500 budget for another PR, But system is giving me Budget excedded error.
    Please advise. It would be a great help of all of you.
    Regards
    Rahul

    Hi Rahul,
    Refer this thread,
    Assigned Values For Project
    I had a strong feelilng that you were using ECC 5.0. I had come across the same issue. Just refer the note and try to apply the notes mentioned there. I am not sure which one i had applied but you can try out with the note number that Muraleedharan has mentiond in the thread. It should work.
    Kindly revert.
    Best Regards,
    Gokul

  • Problem in assigning a coloumn as a Null.

    Hi All,
    I m facing a problem to assigning a coloumn as "Allow Null".
    Plz help me..
    Regards
    Yogesh

    Hi Kumar,
    You can use UserFieldsMD.Mandatory property to allow the UDF to be empty or not.
    Note: You do not have to manage the real database value for the UDF. B1 is responsible to do this.
    Regards Chris
    Message was edited by:
            Chris Kroos

  • Problem in Assigning the Business System

    Hi,
       I have problem in Assigning the Business System at Configuration when I am trying to configure the Communication Channel. I had created two Software Components and also Two Technical Systems (Third Party) and Business System and I imported the SWC into repository and done with the design and now I am not able to Configure, can anyone help me out as this is very urgent.
    Thanks in advance
    Andy

    Hi Andy,
    Check if you have created you business system according to the steps given here, maybe you missed out on something.
    Configuring a Business System
    http://help.sap.com/saphelp_nw04/helpdata/en/ae/e3bd4f6b61e146ad1384954ecabb41/content.htm
    Defining a Business System as a Service
    http://help.sap.com/saphelp_nw04/helpdata/en/3e/60653f0c9fa075e10000000a114084/content.htm
    Regards,
    Chandra

  • Problem in assigning date valje to field

    Hi,
    I have  a problem in assignning date value to field.
    i am retriving date from a table and assigning it to a field which is date type in the form.. but it is not reflecting..
    Error: form Bad Value..
    how to assign the date values in the form..
    Mahi

    Hi mahendra,
    I think the Bad Value Error Occurs only if the databound datasource in the form must have different data type...
    oForm.DataSources.UserDataSources.Add("eDate", SAPbouiCOM.BoDataType.dt_DATE, 10);
      SAPbouiCOM.EditText oEdit;
      oEdit = oForm.Items.Item("1").Specific;
      oEdit.DataBind.SetBound(true, "", eDate);
    with Regards,
    MadhuSudhana Rao.G

  • Problem in assigning field symbol to a nested internal table

    Hi All,
    I have searched the forum but could not find a solution to this problem. I have a requirement where I need to define an internal table within an internal table, so I have used pointer within the outer internal table(itab2) which point to the inner table. However, I am facing problem while assigning the pointer.
    data: begin of struct1 occurs 0,
            fld3(10) type C,
           end of struct1.
    data: begin of itab2 occurs 0,
            fld1(10) type C,
            fld2(10) type C,
            p_inner like ref to struct1,
          end of itab2.
    field-symbols <inner_table> type any.
    I want to assign "itab2->p_inner->* " to "<inner_table>".
    However, the following statement is Not working:
    assign itab2->p_inner->* to <inner_table>.
    I want to fill the values within fields fld1, fld2 and fld3 and append it in itab2.
    The final table should be like:
    ITAB2:
    fld1    fld2    fld3
    aa      bb      cc
                     dd
                     ee
    11      22      33
                     44
                     55
    I have tried many other ways too but could not suceed, please help.
    Thanks,
    Vishal.

    Thanks Matt,
    But how do I append the values within this internal table ??
    When I am using the following code:
    ls_wa-fld3 = 'A'.
    ls_wa-t_in-fld1 = 'B'.
    ls_wa-t_in-fld2 = 'C'.
    ls_wa-t_in-fld1 = 'D'.
    ls_wa-t_in-fld2 = 'E'.
    append ls_wa to lt_tab.
    Its giving an error that:
    The data object "LS_WA" does not have a component called "T_IN-FLD1".
    I wanted the values to be appended in the following way in lt_tab:
    fld3     fld1     fld2
    A     B     C
         D     E
    Please help.

  • Problem in Assigning  table to access sequence

    Dear All,
    i am facing problem in assigning table to access sequence for billing output type.
    I have created 1 table B902 with the combination of Sales org,plant ,Division,Billing doc type.
    but if i am going to assign with access sequence system is taking for Billing type & division & for other its showing red marks & errorr.Access sequence->Aceessess->Field.if i am clicking on field in I/O column for plant its displaying negative.
    bcause of this i am not able to make condtion record.
    Message is Select a document field for WERKS
    Regards
    ajit
    Edited by: SAP SD AJIT on Mar 1, 2010 3:18 PM

    Hi SAP SD AJIT ,
         Go to IMG --> Sales and Distribution --> Basic Functions --> Output control --> Output Determination --> Output Determination using condition technique --> Mantain  output  Determination for billing document --> Mantain condition table,  in the pop-up choose the option "Field catalog: Messages for billing documents", there you can add standard field into the catalog, so you can add WERKS and the other one "document structure" I don't know what field it is, but if it is and standard field you can add it. If you have a Z field you need ABAP help to add the Z field to the structure "KOMKBZ5" and then you can add it to the catalog.
    Regards,
    Mariano.

  • Problem in assign after service callout

    Hello,
    I'm using OSB 11 g. I have a problem with assign after a service callout.
    The XML returned after the service callout is listed below -
    <S:Body xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
    <getCreditRatingResponse xmlns:ns2="http://www.alsb.com/order/" xmlns="http://www.alsb.com/">
    <return>750</return>
    </getCreditRatingResponse>
    </S:Body>
    I have created a separate stage with an assign for storing the return value (750) into the variable creditRating, and both of the following statements are not working (unable to see assigned $creditRating in the trace)
    1. $soapResponseBody/alsb:return/text()
    2. fn:data($soapResponseBody/alsb:return)
    There are no namespace issues. Request help in this regard and thanking you in advance.
    Regards
    Shyam.V

    Hi
    I too ran in the same issue.
    The reponse which i get after service callout is
    added $soapResponseBody
    <S:Body xmlns:S="http://www.w3.org/2003/05/soap-envelope">
    <ns2:getCreditRatingResponse xmlns:ns2="urn:BasicOrderMgr" xmlns="http://www.example.org">
    <ns2:return>750</ns2:return>
    </ns2:getCreditRatingResponse>
    </S:Body>
    and the service callout is followed by an assign where i use the following to assign the variable creditRating
    $soapResponseBody/getCreditRatingResponse/return/text()
    and also tried fn:data($soapResponseBody/*:return) {there is no namespace prefix declaration}
    Please help as i am stuck when i try using the creditRating variable in next route node.

  • Problem with Assign reference document.

    Hi all,
    I defined transaction input parameter type Xml.
    I used Reference Document Loader to load document (structure.xml) below.
    <?xml version="1.0" encoding="UTF-8"?>
    <SO_VALIDATION>
        <L4_SO_ID/>
        <L4_SOI_NO/>
        <PPC_STATUS/>
        <PPC_INFO/>
    </SO_VALIDATION>
    I used menu command Assign Reference Document, to assign above document to transaction input.
    I tryed to use this transaction in vs.net application as a web service.
    But there is no xml structure in InputParams in web service.
    I tryed alot but i did not achieve.
    What must i do?
    Thanks.

    cml_bzl,
    I'm using version 12.04 and I have not had any problems with assigning reference documents and using .NET.
    You should not have to do anyting special to get the transaction inputs to show up in .Net. To map the output I do the following:
    1. Create an output transaction variable and assign it's type as XML
    2. Using a XML document block to create and XML document for your output transaction variable
    3. Assign the XML document as the reference for the output transaction variable.
    THis works for me every time. If you change the transaction parameters, make sure you update the web service form the .NET side.
    Glenn

  • Regarding problem while assigning logical system

    Hi Friends,
    I had a problem while assigning logical system to the client where in both of my systems are having same client number which belong to 2 different systems.
    while assigning the sender and receiver logical system to the same client i am facing problem stating that an entry has already been made for the same key.
    could any one plz give me a clear idea...while assigning logical systems (cross clients) for 2 different systems having same client number.
    Regards,
    Madhu

    Hello Madhusree,
    I'm running with same problem. I've created two logical systems and assigned them to two different clients. But here pops up the issue while generating partner profiles, throwing error "No active plan version exists". Later when I researched about the issue, I came to know that T77S0 table doesn't have any entries regarding plan versions. Basically, I created two clients by doing "client copy" from source client (800 & 100). And I could see plan version entries in the T77S0 of client 800. So, I thought of assigning just defined logical system to the source client 800 itself. But it throws error saying "entry already exists"; as client (800) is already assigned with other logical system.
    By coming across your post, gives me leap of hope that two logical systems can be assigned to same client. Could you please share me those troubleshooting steps concerning this issue. Points will be awarded.
    Regards, Anil. 

  • Problem in assigning the support team automatically-PFAC_RESPO-13200137

    Hi Gurus,
    I am facing a problem in assigning the support team automatically.
    In the transaction PFAC_RESPO , i maintained responsibilites with rule no. 13200137. I created  criteria for determining partners.
    when i simulate the condition @ PFAC_RESPO it is picking correctly the Support team. But when i created a messgae in satellite system, it is not assigning the support team automatically.
    Could anyone highlight me with some inputs.
    by
    D.K.VIJAYABHASKAR

    Hi,
    In the rule definition and responsibility in tcode: PFAC_RESPO.
    i have mentioned some of the Responsibility Specs, like client, installation number.Then when i simulate the condition (@ simulkate rule resolution) by entering the related details system picks the concerned support team.
    But when i created message and checked, it is not picking any of the support team. Determination not happening.
    I used the standard action profile SLFN0001_ADVANCED.
    Action Definition : SLFN0001_ADVANCED_FIND_PARTNER (When message is created, find support team responsible)

  • Problem with Assigning more than one value to GROUP dynamically

    Hi,
    I have a problem with assigning more than one value to GROUP varible dynamically.
    I am able to assign only one value dynamically through Initialization block
    I have even tried with the ROW-WISE initialization blocks..
    using this query..
    SELECT 'GROUP', G.GROUP_NAME
    FROM GROUP_MAP G
    WHERE G.USER_NAME = ':USER'
    if GROUP_1, GROUP_2 are two groups to be associated,
    through this, i'm getting " GROUP_1;GROUP_2 " into GROUP variable ( seen from Narative view )
    And the properties and securities of this Groups are not inherited.
    Please let me know if there is any other way to Populate the GROUP variable dynamically with more than one value.
    Thank you.,

    Hi,
    i finally got in this way..
    i had created a function which takes USER_NAME as input and returns a string that contains the GROUP names with semicolon delimeted..
    Though it is same as that of ROW-WISE initialization,
    the properties of those groups are also being inherited..
    Now, i can assign more than one groups and its properties to a user dynamically.

  • Problem while assigning multiple staffing to project role.

    Dear All,
    I am facing problem while assigning multiple staffing to project role.
    In the project role, we are doing staffing ( assigning BP). While assigning the BP's getting below errors.
    Resource assignments overlap
    Message no. DPR_BUPA_LINK004
    Diagnosis
    The validity period '10.02.2008'-'01.03.2008' for the assignment of project role Product Manager and ' Rakesh Pradhan' overlaps with the validity period of the assignment ''.
    However, the project role type does not allow several staffings to be edited at the same time in the project role.
    System Response
    The system does not allow this constellation of data when saving.
    Procedure
    Check and correct the start and finish dates of the staffings affected.
    Request you to advise in fiixng the issue.
    Thank you for your cooperation.
    Regards,
    Ranjan

    Hi Biplab,
    For multiple staffings in the same time frame, check the option of 'Edit in Parallel' in the Role Type settings in SPRO.
    Let me know if that helps.
    Regards,
    Vivek Pandey

  • Problem with assigning chart of Depreciation to company code

    Hi Everybody
    I am just trying to assign chart of accounts to company code. I get the following error message:
    Inconsistency between FI company code 9100 and chart of deprec. 9100
    Message no. AC481
    Diagnosis
    You tried to assign chart of depreciation 9100 to company code 9100. According to its Customizing definition, this company code manages parallel currencies.
    The chart of depreciation does not contain a corresponding depreciation area for each of the currency types that are defined in the company code.
    System response
    This assignment is not possible.
    Procedure
    1. Check the currency types of the company code.
    2. Specify a corresponding depreciation area for each currency type.
    I have maintained parallel currency for the company code i.e. Currency for Leading ledger is INR and the 2nd and 3rd local currency is EUR and want to keep this setting unchange.
    Can anybody help me to solve this problem.
    Thanks
    SIM
    Edited by: SIM on May 5, 2008 11:10 AM

    hi all
    can anybody help us to solve this issue.
    thanx
    vijay

  • Problem on Assigning Person to a Position

    Hi SAP-HR folks,
    I would like to ask for your assistance on my problem below.
    I've hired a person using New Hire action type. During the hiring process, I've assign the person to a position which I've created also. Then, there is a need for this person to be re-assign to another vacant position. Re-assigning should be done using drag and drop in transaction PPOME.
    I've successfully done the re-assignment of this person to another vacant position using drag and drop. But according to the test scripts that we are following, the expected result should be that the system should refuse the re-assignment after filling in the dates. Re-assignment can only proceed after delimitation of the assignment of person to position.
    May I know if the action that I've done is a normal behavior of SAP? In the case the test scripts are right, may I know on how to successfully follow the scripts?
    Thanks in advance!

    whenever transfer employee from one positon to other position don't do this by drag and drop from ppome.
    just do this by PA40, Org Reassignment action.
    as ppome not support 100% for such change.
    and also if u do this from ppome, it0001 can't be updated for both positions.

  • Problem while assigning Servlet to Execute queue

    Hi,
    We implement a IMS S-CSCF on BEA container 2.2.
    A call for us may be several times reentrant. Meaning that for one call we have to handle at least three different dialogs but in major use cases, it will be 6 or 7 for our next deployment.
    We are currently facing to bottlenecks problems and BEA support advised me to try to check if assigning servelt to execute queue could improve the preformances.
    I just wanted to make a try with one of our servlet but I have an exception java.lang.NoClassDefFoundError: org/jaxen/JaxenException.
    Here is what I did:
    In web.xml I have:
    <web-app>
    <distributable/>
    <servlet>
    <servlet-name>register</servlet-name>
    <servlet-class>com.netcentrex.scscf.registrar.RegistrarServlet</servlet-class>
    <init-param>
    <param-name>wl-dispatch-policy</param-name>
    <param-value>REGISTRARQueue</param-value>
    </init-param>
    <load-on-startup/>
    </servlet>
    <listener>
    <listener-class>com.bea.wcp.sip.engine.server.ContextEventHook</listener-class>
    </listener>
    </web-app>
    In sip.xml I have:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE sip-app
    PUBLIC "-//Java Community Process//DTD SIP Application 1.0//EN"
    "http://www.jcp.org/dtd/sip-app_1_0.dtd">
    <sip-app>
    <display-name>SIP Servlet based Registrar</display-name>
    <distributable/>
    <context-param>
    <param-name>usc.configFile</param-name>
    <param-value>/etc/neotip/usc.ini</param-value>
    </context-param>
    <context-param>
    <param-name>icscf.configFile</param-name>
    <param-value>/etc/neotip/icscf.ini</param-value>
    </context-param>
    <context-param>
    <param-name>usc.dnsSrvFile</param-name>
    <param-value>/etc/neotip/uscDnsSrv.cache</param-value>
    </context-param>
    <listener>
         <listener-class>com.netcentrex.scscf.session.SessionServlet</listener-class>
    </listener>
    <servlet>
    <servlet-name>register</servlet-name>
    <servlet-class>com.netcentrex.scscf.registrar.RegistrarServlet</servlet-class>
    <load-on-startup/>
    </servlet>
    <servlet>
         <servlet-name>session</servlet-name>
         <servlet-class>com.netcentrex.scscf.session.SessionServlet</servlet-class>
         <load-on-startup/>
    </servlet>
    <servlet>
         <servlet-name>route</servlet-name>
         <servlet-class>com.netcentrex.scscf.fork.RouteServlet</servlet-class>
         <load-on-startup/>
    </servlet>
    <servlet>
         <servlet-name>icscf</servlet-name>
         <servlet-class>com.netcentrex.scscf.embeddedI.IEmbeddedServlet</servlet-class>
         <load-on-startup/>
    </servlet>
    <servlet-mapping>
    <servlet-name>register</servlet-name>
    <pattern>
    <equal>
         <var>request.method</var>
         <value>REGISTER</value>
    </equal>
    </pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>session</servlet-name>
    <pattern>
         <and>
              <not>
              <equal>
                        <var>request.method</var>
                        <value>REGISTER</value>
              </equal>
              </not>
              <not>
         <exists>
                   <var>request.uri.param.uscroute</var>
              </exists>
              </not>
              <not>
         <exists>
                   <var>request.uri.param.icscfroute</var>
              </exists>
              </not>
         </and>
    </pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>route</servlet-name>
    <pattern>
         <and>
              <not>
              <equal>
                        <var>request.method</var>
                        <value>REGISTER</value>
              </equal>
              </not>
              <exists>
              <var>request.uri.param.uscroute</var>
         </exists>
         </and>
    </pattern>
    </servlet-mapping>
    <servlet-mapping>
    <servlet-name>icscf</servlet-name>
    <pattern>
         <and>
              <not>
              <equal>
                        <var>request.method</var>
                        <value>REGISTER</value>
              </equal>
              </not>
              <exists>
         <var>request.uri.param.icscfroute</var>
         </exists>
         </and>
    </pattern>
    </servlet-mapping>
    <session-config>
         <session-timeout>30</session-timeout>
    </session-config>
    </sip-app>
    In msi-config.xml, we have:
    <Server Cluster="BEA_ENGINE_TIER_CLUST" EnabledForDomainLog="false"
    ListenAddress="192.168.150.26" ListenPort="8001" Name="engine1"
    NativeIOEnabled="true" NetworkAccessPoints="sipchannel"
    ServerVersion="8.1.5.0" StdoutDebugEnabled="true"
    StdoutEnabled="true" StdoutSeverityLevel="64">
    <NetworkAccessPoint ListenAddress="192.168.150.34"
    ListenPort="5060" Name="sipchannel" Protocol="sip"
    PublicAddress="192.168.150.34" SourcePorts="41000-42000"/>
    <SSL Enabled="false" IdentityAndTrustLocations="KeyStores" Name="engine1"/>
    <Log FileCount="10" FileMinSize="60000" Name="engine1" NumberOfFilesLimited="true"/>
    <ExecuteQueue Name="sip.transport.Default" QueueLength="2048" ThreadCount="25"/>
    <ExecuteQueue Name="REGISTRARQueue" QueueLength="2048" ThreadCount="25"/>
    <ExecuteQueue Name="sip.transport.Default" QueueLength="2048" ThreadCount="25"/>
    <ExecuteQueue Name="weblogic.kernel.Default"/>
    <ExecuteQueue Name="sip.timer.Default" QueueLength="2048" ThreadCount="25"/>
    <ExecuteQueue Name="sip.tracing.local" QueueLength="1024"
    ThreadCount="1" ThreadsMaximum="1" ThreadsMinimum="1"/>
    <ExecuteQueue Name="sip.tracing.domain" QueueLength="1024"
    ThreadCount="1" ThreadsMaximum="1" ThreadsMinimum="1"/>
    </Server>
    Then when I launch a SIP REGISTRATION operation I get the following trace:
    2007-05-30 17:37:03,649 ERROR RegistrarServlet [ExecuteThread: '23' for queue: 'sip.transport.Default'] : Error while processing request: REGISTER sip:netcentrexbench.net SIP/2.0
    P-Charging-Vector: icid-value=AyretyU0dm+1970294253=0465138796
    P-Access-Network-Info: ADSL;dsl-location="netcentrexbench.net;1.2.3.4"
    CSeq: 2 REGISTER
    Call-ID: [email protected]
    Supported: path
    Via: SIP/2.0/UDP 192.168.254.56:5063;branch=z9hG4bK-19606-1-2
    From: dench0 <sip:[email protected]>;tag=1
    Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO
    To: dench0 <sip:[email protected]>
    Authorization: Digest username="dench0",realm="netcentrexbench.net",cnonce="6b8b4567",nc=00000001,qop=auth,uri="sip:192.168.150.34:5060",nonce="NQei3RIBAAA=le+kkCcrZcahXxQ7M6r7dw==",response="b824a93822b267ddfaa07f4039d99d95",algorithm=MD5
    Content-Length: 0
    Contact: sip:[email protected]:5063
    User-Agent: LYNX_BENCH
    Path: <sip:[email protected]:5063;lr>
    Require: path
    Expires: 36000
    Max-Forwards: 70
    java.lang.NoClassDefFoundError: org/jaxen/JaxenException
    at org.dom4j.DocumentFactory.createXPath(DocumentFactory.java:230)
    My first doubt is that I think I should get "ERROR RegistrarServlet [ExecuteThread: '23' for queue: 'REGISTRARQueue'] " instead of "ERROR RegistrarServlet [ExecuteThread: '23' for queue: 'sip.transport.Default'] "
    First question: did I miss something or did something wrong in the configuration?
    Second question: is it really possible to assign a single servlet (from an application containing many other servlets) to a dediacted execute queue?
    Third question: any help is welcome :-)
    Thanks in advance,
    Lionel,

    At teh end I found the basic :-) problem on my exception but anyway , the used execute queue for REGISTER is always sip.transport.default
    Help on this point is welcome!
    Thanks

Maybe you are looking for