***problem in At end command

Hi Guys,
I am getting problem in At end command , at the last record all the character fields value in the int table becomes *****.
        CLEAR l_done.
        AT END OF batch.
          i_rzplan-lit = w_zplan-lit - w_fert_lit.
          i_rzplan-pcs = w_zplan-lit * 1000 / w_marm-umren .
          i_rzplan-gsmng = i_rzplan-pcs * i_rzplan-ntgew.
          modify i_rzplan.
          l_done = 'X'.
        ENDAT.
Thankx for the help in adv.

read i_rzplan.
modify i_rzplan.

Similar Messages

Problems with the vba command sendkeys in Access 2013.

Hi, I have problems with the vba command sendkeys in Access 2013.
I use a text field (no control) in a form. By means of the VBA command SendKeys "+ {DELETE}", 1 I get the text in memory from the text field, then place (paste) the text in a Word document. The command line sendkeys
is followed by moving the focus to a particular control. In Access 2003, which went smoothly. Now the sendkeys command is executed only in Access 2013 in the control that then receives focus. If the procedure ends with the sendkeys command then it works well.
The procedure with the sendkeys command is activated by a button on a form.
Who can help me?
private user

Hi H.Plmp,
Based on the description, you want to call the sendkeys from a button.
>> use a text field (no control) in a form. By means of the VBA command SendKeys "+ {DELETE}", 1 I get the text in memory from the text field<<
What did you mean that you no control? And how did you get the text in memory from the text field? Also I am not able to understand the exact reason that the command doesn't works in Access 2013.
And based on the test, sendkeys "+ {Delete}" works well for me when I set a focus for the textbox control. Here is th test code:
Me.Controls("txtField1").SetFocus
SendKeys "+ {DELETE}", 1
If I misunderstood, please feel free to let me know.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error OTF end command // missing in OTF dat

Hi
I am converting a smartform of a PO into a PDF. when i am using the option of pint immediately in message option of PO. I am getting this error OTF end command // missing in OTF dat . when i am using option 3 which in not print immediately. i am able to convert it into pdf file and save in my local folder. please advice.

when you click the message button while creating a PO. it will take to next page where you add your output type that is output, partner etc.. after you add and click on further data button there you will have option for dispatching here when you add slect option 4 whihc is print immediately. then i am getting the error. if i am using the other options i am able to down load into pdf but not able to see print preview. please advice

I'm trying to migrate from mobileMe to iCloud but I have Snow Leopard (the latest version). It looks like Lion is no longer available because Mountain Lion comes out next month (July). The problem is mobileMe ends on June 30th. How can I migrate?

I'm trying to migrate from mobileMe to iCloud but I have Snow Leopard (the latest version). It looks like Lion is no longer available because Mountain Lion comes out next month (July). The problem is mobileMe ends on June 30th. How can I migrate?
My iphone and my ipad are compatible but when I try to go to icloud on my phone it says to do it on my computer.
I would like to have my calendar, contacts, etc.. all sync like they do now. Is there a way to upgrade before June 30th? If not, will the gap be an issue or will I just be able to buy mountain lion and sync everything?
Any suggestions?
Thank you!

You can buy Lion in the App Store now, but move to iCloud now. If you wait to Mountain Lion, you will only have Mail in Snow Leopard, so you will lose syncing unless you use Lion or Mountain Lion. It's up to you

Problem with 'Edit Locally' command -- Due to IISProxy?

Hi,
We have a problem with 'Edit Locally' command since we are using Windows Authentication. Our architecture is:
SAP EP 6.0 SP2 Patch 28 (Solaris)
IIS Proxy (Windows 2003)
The situation is:
If we access to SAP Portal using old url (directly to Solaris) using form-based authentication we do not have any problem with 'edit locally' command.
However, if we access to SAP Portal using IISProxy and Windows Authentication we get an 'Operation failed' error message.
     Java plug-in console shows the following message:
cargar: clase com/sapportals/wcm/app/docapplet/DocApplet.class no encontrada.
java.lang.ClassNotFoundException: com.sapportals.wcm.app.docapplet.DocApplet.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Where is the problem? Is due to authentication method? SAP Portal or IISProxy configuration?
Thanks,

Thanks for your comment,
Now, we have tested with version 1.5.0_01 plugin version but the result is the same: 'Operation failed'
This is a very important topic to solve before installing Windows Authentication in a productive environment.
Has anybody any solution?
Damiá

HT204380 When I try to FaceTime my sister, she doesn't receive the call on her end, but if she facetimes me I always receive hers. Is this a problem on my end or hers?

When I try to FaceTime my sister, she doesn't receive the call on her end, but if she facetimes me I always receive hers. Is this a problem on my end or hers?

Have her check her "You can be received at ..." settings (Settings/ FaceTime) to see what she's set up as the points of contact to reach her via FaceTime (can be one or multiple e-mails or a phone number). Perhaps you're trying to FaceTime her on an e-mail or phone number which she's not using for FaceTime.

Just installed Lion and the Magic TrackPad and I am having a problem with one click commands. I have to hit the pad fairly hard with one finger to get it to accept the command. Is this normal, is there another way that I am suppose to execute commands?

Just installed Lion and the Magic TrackPad and I am having a problem with one click commands. I have to hit the pad fairly hard with one finger to get it to accept the command. Is this normal, is there another way that I am suppose to execute commands?

No you just need to turn on Tap to Click. Go into System Preferences - Trackpad and click the Point to Click tab and select the first box which will say Tap to Click and you should be in business.

OTF end command // missing in OTF data when using CONVERT_OTF_2_PDF

Hi
When using the function module CONVERT_OTF_2_PDF I am getting the strange scenario that for some users it is giving the error message "<u><b>TD 030: OTF end command // missing in OTF data</b></u>".
I am executing this function module using the OTF output data received from a smartform executed with the parameter control-parameters-getotf = X and I am not formatting it in any way.
any assistance in this is much appreciated.

hi
good
go through this link,which ll give you detail idea about this function module
http://www.jt77.com/development2/programming-07636.html
thanks
mrutyun^

OTF end command// missing OTF data

Hi all,
I created one PO smartform and assigned it to a driver program its execting fine in one development client.
When I try to execute the same smartform in another development client its showing "OTF end command// missing OTF data".
In the driver program there's FM " CONVERT_OTF_2_PDF".But still its showing the error when I run the tcode me9f to send the form through mail and even when checking the print preview.
what could be the reason? Do I have to make any changes in the FM CONVERT_OTF_2_PDF in the another dev client?
Please answer
Thx

Every OTF data has "//" in begining and "EP //" in the end. Are you modifying the OTF internal table before passing it to the FM for PDF conversion? Check the content of OTF in debugging mode.

While converting smartform output toPDF: end command // missing in OTF data

Hi,
While Converting smartform output to PDF i am getiing the following error.
end command // missing OTF data . And also in the importing parameter of smartform function module also (job_output_info ) i did not findout the data. Where did i make a mistake. How can i correct this error. Thanks in advance.

Implemented SAP Note 1123505 - OTF-PDF conversion.

Archive Smartform Copies - Error - OTF end command // missing in OTF data

Hi All,
We are printng invoices and archiving them at the same time.
When I try to print and archive just the original invoice it works fine
That is , it prints and archives.
However when I set the flag SSFCOMPOP-TDARCCOP to 'X' (Archive Copies as well),
I get the error OTF end command // missing in OTF data.
Im guessing that the system tries to archive multiple copies and the End of File Command // at the end of each copy is causing the issue. But I dont know how to go about solving it.
Regards,
Nehal.

Implemented SAP Note 1123505 - OTF-PDF conversion. Archiving several copies

Problem with Put Key Command

Hi everyone
I'm woking on Gem Xpresso card which support scp 02.
I can Authenticate successfully and Install and load my applet on it. but I have problem in put key command.
my first key set is:
47454d5850524553534f53414d504c45
and this is the key that I want to set as my new key:
404142434445464748494a4b4c4d4e4f
with the algorithm that I use the encrypt value of this key will be :
33173C8ECDA55BDF7E50625531BE4FC5
and its check value will be :
8BAF47
so this is the APDU that I send for Put Key command:
80D800814301811033173C8ECDA55BDF7E50625531BE4FC5038BAF47811033173C8ECDA55BDF7E50625531BE4FC5038BAF47811033173C8ECDA55BDF7E50625531BE4FC5038BAF47
but I recieve error 94 85 (invalid check value)
do I calculate my check value wrong?
does different versions of jcdk or different versions of globalplatform hav different ways for calculating check value and keys encrypted values?
I'll appreciate any help
Best Regards,
Shilan

Try visit Gemplus forum or mailing-list.

I want to reinstall CS4 as it has been doing some strange things regarding printing, etc. However, when I did this before, it created a major problem and I ended up buying a new computer because no one could figure out why it kept hanging up during the in

I want to reinstall CS4 as it has been doing some strange things regarding printing, etc. However, when I did this before, it created a major problem and I ended up buying a new computer because no one could figure out why it kept hanging up during the installation. Hours on the phone, no results. I'm scared to do it on this computer. Should I try? Not even the Adobe support could get it resolved. I believe it was somehow reading a product number that could not be deleted or something, and nothing worked.
Message was edited by: Doug Doug

Hello, as an addition:
In your case I would download a really new trial version of your program(s) in question and change it/them into a "real" version later, BUT because you said, that you "re-installed" already, so it will become a little bit more complicated. It would be necessary that you have to use "Adobe Creative Suite Cleaner Tool" as Keith wrote.
Here an advice for that (The order varies depending on your individual needs. Please read all my proposals first, so you can better choose the first step:)
1. Maybe you have to activate/deactivate, so please have a look there:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
2. Sometimes, we know in the meantime, the "opm.db file" is the culprit. In this case you should delete it.
3. Be careful with (de)installing aso. by (de)installing by your own resources. As much as I regret it and as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool. Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
I quote: Adobe Creative Suite Cleaner Tool helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html and follow the prescribed sequence of operations
4. If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use the chat, I for may part - as it seems unlike you - had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
Hans-Günter

Problem with FNDLOAD upload command for Concurrent Program

Hi Apps Gurus,
I am facing a peculiar problem with the FNDLOAD command.
My customer has a concurrent program which is running fine in Prod, and now they have requeseted for a change in the program, the change requested was to modify the parameters and the name of the program. I have done the changes and when I try migrating this change from DEV instance to IAT using FNDLOAD commands it is not getting migrated. There does not seem to be any problem with the LDT file, There is no error message in the log as well.
However I have noticed something very peculiar.* In the target instance (IAT) , when i run the FNDLOAD command directly the migration is unsuccessful but when i delete the existing parameters of the prog and rename the concurrent program and then run the FNDLOAD command the migration is sucessful and the changes are getting reflected!!. I dont understand why this is happening. This is happening in preprod as well , the migration is unsucessfull initially when i directly run the command, when i modify the name and parameters of the prog and then run the command the migration is sucessful. Now i do not have access to prod and this trick of changing prog name and parameters cannot be done in prod , so I need a proper solution for the migration.
Any pointers to resolve this issue will be helpful.
Thanks,
Mahesh

I am facing a peculiar problem with the FNDLOAD command.
My customer has a concurrent program which is running fine in Prod, and now they have requeseted for a change in the program, the change requested was to modify the parameters and the name of the program. I have done the changes and when I try migrating this change from DEV instance to IAT using FNDLOAD commands it is not getting migrated. There does not seem to be any problem with the LDT file, There is no error message in the log as well.
However I have noticed something very peculiar.* In the target instance (IAT) , when i run the FNDLOAD command directly the migration is unsuccessful but when i delete the existing parameters of the prog and rename the concurrent program and then run the FNDLOAD command the migration is sucessful and the changes are getting reflected!!. I dont understand why this is happening. This is happening in preprod as well , the migration is unsucessfull initially when i directly run the command, when i modify the name and parameters of the prog and then run the command the migration is sucessful. Now i do not have access to prod and this trick of changing prog name and parameters cannot be done in prod , so I need a proper solution for the migration.
Any pointers to resolve this issue will be helpful.What are the commands you used for the download/upload?
Do you get any errors in the log files?
Please see (FNDLOAD Download / Upload Concurrent Programs Fails To Load Parameters [ID 1101946.1]).
Thanks,
Hussein

Facing Problem while executing a command through WLST

Hi,
Iam using Weblogic 11g(10.3.2).Whenever I execute the below command in WLST on windows it is working fine.
reassociateSecurityStore(domain="base_domain",admin="cn=orcladmin",password="welcome1",ldapurl="ldap://<hostname>:389",servertype="OID",jpsroot="cn=jpsroot_idm_idmhost1")
But whenever i execute the same in Linux,it is throwing the error as below:
wls:/base_domain/serverConfig> reassociateSecurityStore(domain="base_domain",admin="cn=orcladmin",password="welcome1",ldapurl="ldap://<hoistname>:389",servertype="OID",jpsroot="cn=jpsroot_idm_idm1")
Traceback (innermost last):
File "<console>", line 1, in ?
NameError: reassociateSecurityStore
Please suggest....
Regards
Pavan

Facing Problem while executing a command through WLST

***problem in At end command

Similar Messages

Maybe you are looking for