Problem in auto mail forwarding SO36

Hi,
I had setup in SO36 for a user, but she's going on leave and would all her messages to go to another user for one week. I tried it in SO36, but the system told me 'Activation time already exists'. How do I deactivate the original forwarding or change the forwarding period?
Many thanks,

Hi
   This problem was not resolved. I tried few things but not good. So what we did we created a few profile like MM/SD/FICA and we executed report based on profile and sent them only the column relevant to them.
Regards,
Atul Joshi

Similar Messages

  • Problem in Auto Mail of ALV Report :  Urgent

    Hello All ,
    I have created one ALV Report contain 240 Columns . This report is need to schedule for auto mail in HTML Format.
    My Problem is when I am sending this report manually the html output displays all the columns in the mail attachment.  While it is scheduled thro' SM36 in background mode the HTML format displays only restricted columns (say upto 132 columns)
    Also, we have tried to create new page format  X_65_512/2 to accomodate the output.  However this option did not work.
    Any solution to resolve the same is most welcome !
    Regards
    Swati Namdeo

    Hi
       This problem was not resolved. I tried few things but not good. So what we did we created a few profile like MM/SD/FICA and we executed report based on profile and sent them only the column relevant to them.
    Regards,
    Atul Joshi

  • Problems with icloud mail constantly auto-saving

    Problems with icloud mail constantly auto-saving - screen freezes. VERY frustrating. running windows 8. same problem through safari, explorer and chrome. Any suggestions to reduce auto save frequency?

    Hi Csound1
    approx every 30 seconds the browser freezes and 'saving' appears in the top bar of icloud mail. The cursor starts spinning and then after about 8 secs I can start typing again. I also fiund that about 5-6 times a day my icloud browser tab showing mail just close and return to the main icloud menu page showing icons for mail, calender, notes etc

  • Mail has problem with auto address.

    My mail recently has had a problem with auto addressing. Sometimes it fills in the address, at other times it will not. I have checked mail preferences often...making sure auto-address is on. I CAN use the address book to click on an address when auto addressing doesn't work. Mail is also quirky about quitting and sometimes preferences have to be re-edited to send. Basically, it is behaving badly. What to do? Thanks ACE

    My mail recently has had a problem with auto
    addressing. Sometimes it fills in the address, at
    other times it will not. I have checked mail
    preferences often...making sure auto-address is on. I
    CAN use the address book to click on an address when
    auto addressing doesn't work. Mail is also quirky
    about quitting and sometimes preferences have to be
    re-edited to send. Basically, it is behaving badly.
    What to do? Thanks ACE
    Later...12/03. Autofill not working with mail or safari. Autofill icon, when touched says something like...autofill has no infomation. this is weird, since it had been working nicely for 2.5 years. I've tried everything I could think of. Need a pro's help...MNICE

  • Links in mails forwarded by an inbox rule get broken/removed

    Hi,
    after I upgraded from Exchange 2007 to Exchange 2013 I got a weired problem with auto forwared e-mails as this mails end up with broken (empty).
    Only links with custom protocol headers are broken/removed, HTML links (http://, https://) are not removed.
    Only internal mails forwarded by an inbound rule (created with outlook) have this problem, mails forwarded directly with Outlook or mails auto forwarded (inbox rule) to an external receipient are ok.
    Original links in HTML Mail Source (partly) look like this
    <a href="MIS:\\VGD12_1_KS\2014\0623\VGD12_1_Kreditsanierung_TM604_D20140623.xlsm?openmode=0">VGD12_1_Kreditsanierung_TM604_D20140623.xlsm<
    and end up as
    <a href="">VGD12_1_Kreditsanierung_TM604_D20140623.xlsm<
    Any suggestion to solve or further analyse this problem is welcome.
    Regards
    Martin

    Hi Martin,
    From your description, I recommend you send the following message to an internal recipient directly and check if it will be corrupted.
    <a href="MIS:\\VGD12_1_KS\2014\0623\VGD12_1_Kreditsanierung_TM604_D20140623.xlsm?openmode=0">VGD12_1_Kreditsanierung_TM604_D20140623.xlsm<
    I look forward to your response.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

  • Nokia Mail forwarding to Hotmail

    Hello everybody!
    I am provided with an account from Nokia, an OVI account. I am willing to forward the e-mail that I receive in this account to my Hotmail. But I accidentally did a mistake. When I put my hotmail account name in OVI in order to forward, there was an e-mail sent to my Hotmail (a verification e-mail).
    I accidentally clicked to block the OVI account in that e-mail. Now I cannot do anything, OVI refuses to setup the forwarding account. In addition, when I sign-in in my Hotmail and go to the corresponding section to add an account to receive messages, the process cannot be completed. How can I resolve this problem?
    Thank you in advance!!

    Hi,
    How do you configure your auto-forwarding for your mailbox? We also need to check whether other users can auto-forward message to Hotmail or Gmail properly.
    Generally, we configure mail forwarding by using ForwardingAddress parameter in Set-Mailbox cmdlet. If so, we also need to create a mail contact or mail user for your hotmail/gmail address in Exchange server. For more information about mail
    forwarding, please refer to:
    http://technet.microsoft.com/en-us/library/dd351134(v=exchg.141).aspx
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Problem description: mac mail not opening, software updates not working, app store not opening. imac osx 10.9.5

    Problem description:
    mac mail not opening, software updates not working, app store not opening. 10.9.5
    EtreCheck version: 2.0.11 (98)
    Report generated 1 December 2014 16:51:49 CET
    Hardware Information: ℹ️
      iMac (21.5-inch, Late 2009) (Verified)
      iMac - model: iMac10,1
      1 3.06 GHz Intel Core 2 Duo CPU: 2-core
      12 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1067 MHz ok
      BANK 0/DIMM1
      2 GB DDR3 1067 MHz ok
      BANK 1/DIMM1
      2 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      NVIDIA GeForce 9400 - VRAM: 256 MB
      iMac 1920 x 1080
      BenQ GL2240 1920 x 1080 @ 60 Hz
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 1:32:17
    Disk Information: ℹ️
      WDC WD5000AAKS-40V2B0 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 499.25 GB (164.03 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      HL-DT-ST DVDRW  GA11N 
    USB Information: ℹ️
      EPSON EPSON Epson Stylus S22 Series
      Canon MX410 series
      ASMedia AS2105 1 TB
      S.M.A.R.T. Status: Verified
      EFI (disk3s1) <not mounted> : 210 MB
      Backup (disk3s2) /Volumes/Backup : 999.86 GB (506.24 GB free)
      Apple Inc. Built-in iSight
      Apple Internal Memory Card Reader 7.95 GB
      S.M.A.R.T. Status: Verified
      EOS_DIGITAL (disk1s1) /Volumes/EOS_DIGITAL : 7.94 GB (7.83 GB free)
      Western Digital My Book 1140 2 TB
      S.M.A.R.T. Status: Verified
      EFI (disk2s1) <not mounted> : 210 MB
      2TB (disk2s2) /Volumes/2TB : 2.00 TB (1.50 TB free)
      Wacom Co.,Ltd. CTE-450
      Contour Design ShuttlePRO v2
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/Parallels Desktop.app
      [not loaded] com.parallels.kext.hidhook (9.0 24217.979618) Support
      [not loaded] com.parallels.kext.hypervisor (9.0 24217.979618) Support
      [not loaded] com.parallels.kext.netbridge (9.0 24217.979618) Support
      [not loaded] com.parallels.kext.usbconnect (9.0 24217.979618) Support
      [not loaded] com.parallels.kext.vnic (9.0 24217.979618) Support
      /Applications/Toast 10 Titanium/Toast Titanium.app
      [not loaded] com.roxio.BluRaySupport (1.1.6) Support
      /Library/Extensions
      [loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
      [not loaded] xxx.qnation.PeerGuardian (1.1.9) Support
      /System/Library/Extensions
      [not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) Support
      [not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
      /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
      [not loaded] com.roxio.TDIXController (2.0) Support
    Startup Items: ℹ️
      ParallelsDesktopTransporter: Path: /Library/StartupItems/ParallelsDesktopTransporter
      WkSvMacX: Path: /Library/StartupItems/WkSvMacX
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [running] at.obdev.LittleSnitchUIAgent.plist Support
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.CS4ServiceManager.plist Support
      [running] com.epson.epw.agent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
    Launch Daemons: ℹ️
      [running] at.obdev.littlesnitchd.plist Support
      [failed] com.adobe.fpsaud.plist Support
      [loaded] com.adobe.versioncueCS4.plist Support
      [loaded] com.barebones.textwrangler.plist Support
      [running] com.cleverfiles.cfbackd.plist Support
      [not loaded] com.gopro.stereomodestatus.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [invalid?] com.tvmobili.tvmobilisvcd.plist Support
      [loaded] fi.polar.libpolar.plist Support
      [running] fi.polar.polard.plist Support
      [failed] xxx.qnation.PeerGuardian.kextload.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.facebook.videochat.[redacted].plist Support
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.macpaw.CleanMyMac.helperTool.plist Support
      [loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
      [running] com.macpaw.CleanMyMac.volumeWatcher.plist Support
      [invalid?] com.plexapp.helper.plist Support
      [not loaded] com.spotify.webhelper.plist Support
    User Login Items: ℹ️
      Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
      SmartDaemon Application (/Library/Application Support/CleverFiles/SmartDaemon.app)
      SilverKeeper Scheduler ApplicationHidden (/Applications/SilverKeeper.app/Contents/Resources/SilverKeeper Scheduler.app)
      Dropbox Application (/Applications/Dropbox.app)
      Garmin ANT Agent UNKNOWN (missing value)
    Internet Plug-ins: ℹ️
      DirectorShockwave: Version: 11.5.7r609 Support
      Google Earth Web Plug-in: Version: 6.1 Support
      Default Browser: Version: 537 - SDK 10.9
      Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
      PandoWebInst: Version: 1.0 Support
      AdobePDFViewerNPAPI: Version: 10.1.12 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      DivXBrowserPlugin: Version: 2.0 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.239
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.0.0 Support
      AdobePDFViewer: Version: 10.1.12 Support
      GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 Support
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User Internet Plug-ins: ℹ️
      fbplugin_1_0_3: Version: (null) Support
    Safari Extensions: ℹ️
      Open in Internet Explorer
    Audio Plug-ins: ℹ️
      DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
      Adobe Version Cue CS4  Support
      DivX  Support
      Flash Player  Support
      Flip4Mac WMV  Support
      GoPro  Support
      Growl  Support
      Java  Support
      MacFUSE  Support
      MenuMeters  Support
      Perian  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: NO - Auto backup turned off
      Destinations:
      Back Up [Local]
      Total size: 0 B
      Total number of backups: 0
      Oldest backup: -
      Last backup: -
      Size of backup disk: Excellent
      Backup size 0 B > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          12% Google Chrome
          12% WindowServer
          4% Dock
          2% Little Snitch Agent
          2% SystemUIServer
    Top Processes by Memory: ℹ️
      399 MB iTunes
      322 MB mds_stores
      216 MB Google Chrome Helper
      193 MB Google Chrome
      155 MB com.apple.IconServicesAgent
    Virtual Memory Information: ℹ️
      6.64 GB Free RAM
      3.51 GB Active RAM
      1.36 GB Inactive RAM
      1.11 GB Wired RAM
      1.91 GB Page-ins
      0 B Page-outs

      [not loaded] com.pctools.iantivirus.kfs (1.0.1) Support
    Un-install according to the developer's un-install instructions.
    You do not need to use cleaning programs. They can destroy your computer operation as they may already have done.
    CleanMyMac - Uninstall
    CleanMyMac2 Un-install
    After un-installing, run this program to make sure you got all the pieces.
    EasyFind – Spotlight Replacement
    Do a backup.
    Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J.  When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder.  Select Library. Then go to Preferences/com.apple.appstore.plist. Move the .plist to your desktop.
    Restart, open the application and test. If it works okay, delete the plist from the desktop.
    If the application is the same, return the .plist to where you got it from, overwriting the newer one.
    Thanks to leonie for some information contained in this.

  • ICloud : automatic mail forward doesn't work

    Hi,
    I've setup an automatic mail forwarding through icloud.com mail application, in preferences.
    At first, it worked.
    A few days later it doesn't.
    I've tryed to disable, enable, re-type the destination email address (gmail), nothing works : mails won't be forwarded, but they get deleted (I checked the option, this one works).
    I've contacted Apple Support Express Lane, who reset my preferences on the server (it changed nothing to the preferences I see) : there is no result on this one either.
    When I forward an email manually to the same gmail address : it works.
    Any of you having the same issue ?

    Update. It appears that auto forwarding works except for emails sent from a gmail account associated with the "forward to" address. If I send from my comcast account it works, but if I send from my gmail account, using the gmail or comcast address, it doesn't. On the plus side, mail sent from other gmail accounts apeears to work.  So other than for testing purposes, this may not be a big deal.

  • Problems with auto upgrade Anyconnect 3.1

    Hello,
    I'm having problem with auto upgrade of Anyconnect 2.5 to 3.1.
    Here is the situation :
    I have ASA5510 running ASA 8.4.5 and clients are running Anyconnect 2.5.3055 and 3.1.00495 with 2 different profiles.
    Clients with 2.5 can upgrade to 3.1 but then receive an "Invalid host entry" when they try to connect with new client. It works if they use FQDN instead of profiles. It's the same situation with Windows 7, Mac OS X and linux.
    If I configure client software back to 2.5 on ASA, it works again for every client.
    Do you have an idea ?
    Thanks for your reply.
    Yann

    I have seen the same behavior on Mac OS X. A couple of points for me:
    If I delete the profiles from /opt/cisco/anyconnect/profile then I can connect once (using the FQDN) but it then downloads the client profile and on next attempted connection it receives "invalid host entry." My profiles use the FQDN of my ASA and both forward and reverse DNS resolution are configured properly.
    My workaround is to remove the AnyConnect Client Profile entirely, but I can get away with that because I have a very simple setup, with all users in one default group. If I had to pass different profile information to different users that would not be a solution.
    Second, better workaround: I just exported the client profile, imported it under a different name, edited the new client profile to remove the server address, and assigned the new profile to the group policy. At their next login, users get all the profile settings and since the client remembers the FQDN they used to connect it doesn't adversely affect the user experience.

  • Grant mail forwarding privileges? - OWA 2013

    In a locally hosted Exchange 2013 environment I would like to allow some users to be able to go through /owa and enable forward all mail to '[email protected]' I have it set up but nothing is happening. Is there a rule that needs to be enabled to allow
    mail forwarding, I don't want to have to create external contacts for each external address they send to.
    Let me know!
    Thanks!

    Hi
    Auto Forwarding is by default not enabled in an Exchange environment.
    It is a organizational setting that can be enabled on a "remote domain basis"
    only  and not for an individual user.
    Set-RemoteDomain
    http://technet.microsoft.com/en-us/library/aa997857(v=exchg.150).aspx
    If you don't want to do that (=understandable) then your only option is to create MailContacts that your users can use in the rules they create.
    Martina Miskovic

  • Mail forwarding in Lion

    In Workgroup Manager on Snow Leopard Server when you edited a users account settings, there was a "Mail" tab which you could enable/disable the mailbox, or, have the email forwarded to an external mail account.
    So where is the equivalent option to do this in Lion Server? I can find the option to enable mail services for the user in the Server.app, and I can add mailbox aliases (using secondary shortnames) to Workgroup Manager, but I can't find anywhere to allow mail forwarding to an external address.
    Any ideas anyone?

    This problem was crippling a large client after migrating from Microsoft Online Services (now Office 365) to Lion Server.
    Not having this feature is simply unacceptable.
    However, I have finalized a way to get group emails working. It involves adding the LDAP 'mail' attribute to each group that you would like to have members 'subscribed' to for group email (simply by being in that group) by doing the instructions below.
    Open Directory Utility on your Lion Server. Authenticate as the LDAP Admin account (usually diradmin) and edit 'groups' in LDAPv3/127.0.0.1. You can add an object type called EMailAddress for any group in LDAP. Add the accounts to the group that you would like to receive email.
    I preferred creating my own file called /etc/postfix/ldap-groups.cf, but you can use the provided /etc/postfix/ldap-aliases.cf if desired.
    In it, I put the following information to make postfix find the email address for the group, and then expand memberUid to uid, then formatting the results in an acceptable email format.
    /etc/postfix/ldap-groups.cf
    server_host = localhost
    search_base = cn=groups,dc=domain,dc=tld
    version = 3
    query_filter = (mail=%s)
    result_attribute = memberUid
    result_format = %[email protected]
    Once that is configured, you can test it by the Terminal:
    $ postmap -q (EMailAddress)@domain.tld ldap:/etc/postfix/ldap-groups.cf
    It should return users' email addresses.
    After that, add the following information into main.cf
    virtual_alias_maps = ldap:/etc/postfix/ldap-groups.cf
    Restart postfix
    # sudo postfix reload
    Send yourself a test email and enjoy the functionality of what should have been included in Lion Server in the first place.
    I am currently looking for a way to query OpenLDAP in a similar way, but instead be able to get the group email address to forward to users in it and to addresses outside of only LDAP users: e.g. forward to uid1, uid2, name(at)gmail.com.
    Also, being able to have some kind of rules for who can email the group ... would be nice. However, it seems that Apple has run out of nice.

  • SMTP mail forwarding

    Hi ,
    In one of my customers IMS system we have a web mail server with http.smtphost settings which forwards the http/smtp traffic to one of
    virus wall server for filtering. After reading the forum thred below I am also thinking of avoiding the http.smtphost method and using some other way of
    http/smtp mail forwarding. Bcos this syetm carry huge http based traffic in that ISP.
    web mail behaviour for unknown recipient
    I can enable imta on the same web mail host and remove http.smtphost setting so that web mail server can
    use its defualt for http/smtp delivery. But my problem is how can I forward "all" the channels traffic to the virus wall ( not only tcp_local)?
    msg server version --> 7u3
    Thanks and best regards,
    ...

    Adding the daemon option to the tcp_local channel, as Ray suggested, will route all mail enqueued to the tcp_local channel to the specified host. However, if you want to route all mail thru that host, rather than just that which would normally go thru the tcp_local channel (ie, mail submitted by webmail users and destined for other users on the same system, it will be more complicated. If that other mail all goes thru the tcp_intranet channel, you could add the daemon option to the tcp_intranet channel as well and that would be the end of it. But if this is a single-host deployment where mshttpd is running on the same system as the message store, then such local delivery would probably go directly to the ims-ms channel.
    See the aliasdetourhost option in Routing After Address Validation But Before Expansion in the Admin Guide:
    http://wikis.sun.com/display/CommSuite/Configuring+Channel+Definitions#ConfiguringChannelDefinitions-RoutingAfterAddressValidationButBeforeExpansion
    It is also mentioned in
    http://wikis.sun.com/display/CommSuite/Messaging+Server+Best+Practices+for+Fighting+Email+Spam

  • Is anyone having problems with Yahoo mail please ?

    Hi,
    I am having problems with yahoo mail.  I have to log in and out a few times before the inbox will open.  Having eventually got in, it fails to delete. 
    So I'm asking if others are experiencing similar problems please ?
    Best regards,
    dfenceman

    Hi,
    This problem seems intermittent.  It was working OK earlier this morning but now I can't open emails, I'm getting the following error message "We’re sorry, but there appears to be a problem loading the email".
    If I try forwarding the message to an alternative email address, as suggested on the Yahoo community forum, I get this error message "Yahoo Mail is having a problem retrieving the original email for reply or forward."
    Has anyone got a fix, or even a workaround please ?
    Can the mods help with this ?
    Best regards,
    dfenceman

  • Problem deleting e-mail (folder return newest messages first, older last)

    I made a program, using javamail, to accomplish a quite sofisticated mail forward.
    I read a specific mailbox, I read each message in the INBOX, and in some conditions (I read the content, get a predefined field containing a product ID, read a database and check if the price is high) I forward the e-mail.
    Then I delete the forwarded email from the inbox.<br>
    I am using pop3 & smtp, and I have First Class from Centrinity as Mail Server.
    The problem I have is the following:
    1) in the messages array filled with Message[] messages = folder.getMessages() I get the newest messages first, the older last.
    2) I scan the array, and, based on the Item price (as explained before) I delete some messages: messages(i).setFlag(Flags.Flag.DELETED,true)
    3) messages are phisically deleted only when the folder INBOX is closed: folder.close(true)
    4) if new messages arrives before closing the INBOX, THE WRONG MESSAGES ARE DELETED!.
    Example:
    - I have 3 messages in the inbox;
    - the program start;
    - I process the message number 1, I forward it, I delete it;
    - I process the message number 2, no forward, no delete;
    - (a new message "NEW" arrive now);
    - I process the message number 3, no forward, no delete;
    - I close the folder
    - THE NEW MESSAGE IS DELETED!!!!!!
    I am sure this is because of the ordering of the messages, but I cannot figure out a safe deletion while new messages arrives (and I cannot think I can't solve this problem: no pop3 client should exists!!)
    Thanks in advance for the help
    Paolo Rossetto

    Please take a look at : http://java.sun.com/developer/onlineTraining/JavaMail/contents.html
    and you will find the answer

  • OS X Mail forward Major bug

    After upgrading to OS X Yosemite i noticed this strange bug
    I normally have a quotation template mail which i send to all my clients and everytime i get a new request,i forward the same mail just by editing the content and send it to the new address .However after upgrading to 10.10 i realised that the new mail also goes to to the old recipient and it shows up as conversation inspite of me not marking it to the older client.This problem comes and goes.
    For ex. [email protected] needed a quote
    I sent an email with text,picture and quotation attached in pdf to [email protected]
    then [email protected] had an enquiry .So i forwarded the same mail by editing the quotation text of the .pdf file and changing the text in the mail forward and attaching the new pdf quotation file.This saves me time to retype the whole covering letter and attaching the same pictures.Just the new edited .pdf has to be attached
    However After sending all these mails show up as a conversation under sent mails ,where in the mail sent to [email protected] goes to [email protected] inspite of me not marking the mail to [email protected]

    I'll have to do some testing to determine if I see the same thing. Are you certain the emails went to both and are not just grouped together as a "conversation" in Mail?
    You might want to consider making a Stationery Template for your quotes. Here is a tutorial: http://www.chriswrites.com/create-custom-html-email-templates-in-the-os-x-mail-a pp/
    The path to the Stationery for Step 3 is this in Yosemite:
    ~/Library/Containers/com.apple.mail/Data/Library/Application Support/Mail/Stationery/Apple/Contents/Resources/Custom/Contents/Resources/
    As mentioned here: https://willow4u.wordpress.com/2015/01/04/custom-html-email-stationary-os-x-yose mite/
    That way, you can create your boilerplate in the Stationery and just add the PDF (and any additional comments for that particular customer).

Maybe you are looking for