Problem in Banking External reconcilation -already exist in Table "OMTH

Hi,
    All,
         I am getting One Problem while Banking External reconcilation for an accont.it is giving error that entry already exist in Table "OMTH".
         it happens many times,Can u tell me reason and what may be solution to not getting again this problem because it is coming many times .
Thanks In Advance

Hi
I found this Note 1062219 - Manual reconciliaton failed - primary key constraint
The note is for 2005, but I would run the queries related in the note.
Kind regards.
Agustí

Similar Messages

"Sequence number already exists in table" maintining Data Sources

Hi fellows, i am seting up a new connector in GRC 10.0, but when configuring the connector for the User detailed Data sources i get the same error; "Sequence number already exists in table".
I have tried with over 200 numbers which I know for sure are available and still get the same error. Where can I find the table with this information?
Can the information be removed to clean up table space?
Thanks for your help!!!

Hi Gabriela
I recall getting this error a lot and it seemed to be a buffering/memory problem where it was remember the old value was getting remember. I had to exit out of the IMG navigation and reenter it again. It'd happen if I deleted one entry and then went to add another (even after saving). Not sure if you are getting this
Other thing is to check the backed tables to see if any orphaned values on the primary key
Regards
Colleen

"This entry is already exists in tables(JDT1)(ODBC-2035)" Error.

Hi experts,
My Production_DB Database was got into Suspect mode due to power problem,the users unable to open SAP. so run the script file so production_db came into normal mode and sap opened.
But which documents were posted at the time of database going to Suspect mode that documents are not visible and then users repost the documents they are getting "This Entry is already exists in Table(JDT1) (ODBC-2035)" Error.
so we run the select query for JDT1 table in sql server 2005,we got "Msg 605, Level 21, State 3, Line 1
Attempt to fetch logical page (1:394560) in database 7 failed. It belongs to allocation unit 72057596881666048 not to 72057596584198144".
I am using SAP PL 20 and SQL server 2005.
I am waiting for your response ASAP.
Thanks & Regards.
Srinu Boddeti.

Hi Srinu,
please refer below link for details..
http://forums.sdn.sap.com/thread.jspa?threadID=1636430
Thanks and Regards,
kaviprashu

Why the system create HU that already exists in table VEKP when I use BAPI_HU_CREATE?

Hi All,
When I use the BAPI_HU_CREATE to create HU, the system give me a HU and it inserts a line in Table VEKP, however when I search in table VEKP with field HU EXIDV, I find two entries with the same HU, one of them has VPOBJ 01 and the other has VPOBJ 12, So when I execute transaction LM46 the system shows “The system could not find transfer order for execution” because the system search in table VEKP it find the first line with VPOBJKEY = delivery and STATUS = 0020, however those delivery is not assigned to transfer order that I want to confirm transfer order.
Why the system create HU that already exists in table VEKP when I use BAPI_HU_CREATE?
Thank you!
Best regards

Do you want to say that you got 2 HU from BAPI_HU_CREATE?
I think you only got the one which has VPOBJ = 12 Non-Assigned Handling Unit
which is exact what the BAPI is used for, see the docu in SE37. Didn't you yourself add this EXIDV in the IDoc?
VPOBJ = 01 Outbound Delivery
If you want to pack the Outbound delivery then you should use BAPI_HU_PACK.

Problem upgrading database.Object 'DF_ODLN_DocType' already exist in databa

Hi all,
The problem appear in upgrading, when the progessbar is in ODLN table.
The error say:
[Microsoft][SQL Native Client][SQL Server] Object 'DF_ODLN_DocType' already exist in database. 'Entrega'(ODLN).
Someone knows in wich table are the objects DF........? When sap upgradings wich tables use for this?
How i can repair this database without import all data to another new created database?
Thank you all again.
Regards.

Sorry,
nobody can move this thread please, i think that his place isn´t there.
Sorry again.

Problem when saving files (file already exists-)

Woking in CS5.1.
When I save a document (as opposed to "save as"):
I get a message "some of the specified files already exist in the target location. The files marked below will be replaced".
The file I am working on gets saved, but creates a second version "file name-01.ai"
Any ideas?

Works fine here CS5 on Windows.
When I save, it will warn me only if the file with the same name already exists and if I choose to replace it it will replace the existing file keeping the name I'm saving it with.

This Entry Already exists in table (Message: 131-183)

Hia All,
I have a very serious problem that's I have been unable to solve on my own.
I have a User defined form that is linked to a User defined Object. The Object consists of a Master data and a Master Data Lines table.
I am able to add a record without any problem, but I attempt to update an existing record I get the following error: "This entry already exists in the following tables..."
Strangely, this only happens when I add iditional records to the Lines table, and not when existing data is altered.
Please help me.

Hi Ben, yes I was able to solve the problem.
It seems that when you add additional rows to your lines table, you have to manually add the records to the DBDatasource on the before action. i.e. Catch the Item Pressed before action on item 1 (OK button), and manually insert the additional lines into the DBDatasource as displayed below.
e.g.
i = oForm.DataSources.DBDataSources.Item(1).Size
oForm.DataSources.DBDataSources.Item(1).InsertRecord(i)
oForm.DataSources.DBDataSources.Item(1).Offset = oForm.DataSources.DBDataSources.Item(1).Size - 1
oForm.DataSources.DBDataSources.Item(1).SetValue("U_ItemCode", i, Code)
This code will typically reside insode a loop seeing as you will loop through your matrix/grid rows and add the additional lines.
This sorted out the problem for me, I hope it hepls you.

Using of already existing logical tables and columns in a new subject area.

Hi Every one,
i am new to OBIEE technology.
In my project i need to create a new subject area for already existing RPD.
In that RPD there are some logical tables and column created for previous project and i need to use those in this new subject area that i am going to create.
My question is what is the best way to use them .
I mean just to drag and drop them into new subject area or any other way.
please have your valuable suggestions
thanking you

Yes, you can basically copy paste all the tables that you need from BMM layer into your new folder in the presentation layer. Just make sure all the joins are defined well between all the tables that exists in the new folder, so you wont end up running into ODBC errors when you run analysis.
Hope this helps.
Thanks,
-Amith.

RFCFILE7: Different Error messages on the same error: BP already exists...

Hi,
migrating Business Partners with the RKCFILE7 Direct input program gives 3 different error messages in case that the BP already exists:
1. BP & already exists in role BCA010
2. BP with external number & already exists
3. Data record to be created is alrady available in table BUT000
The strange issue is, that migrating same BPs twice the error log gives for each BP one of these 3 error messages.
However all 3 messages are valid for all BPs (they all exist).
Any idea?
Thanks
Thomas

does not matter anymore

Value already exist

hi
how to find the value is already exist in table
during inserting values to table
eg :email id already exist (in registration form in some job site)

Hai,
Before inserting records into the table, i.e, Before action=true of button click
try this,
recordset = ocompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
Dim qry4 As String = "SELECT * FROM table T0 WHERE field='value'
recordset.DoQuery(qry4)
If recordset.RecordCount = 1 Then
SBO_Application.StatusBar.SetText("Entry Already Exists", SAPbouiCOM.BoMessageTime.bmt_Short, SAPbouiCOM.BoStatusBarMessageType.smt_Error)
BubbleEvent = False
Exit Sub
end if
Thanks

I have been backing up my photos to an external hard drive. I usually choose the photos, copy and paste them to the EHD. It has started saying "an item named "unnamed.jpg" already exists in this location. I don't know what to do.

I have the MacBook OS X 10.5.8, 2.4 GHz, 2 GB. I have been backing up my photos to an external hard drive since I purchased it. I usually choose the photos, copy and paste them to the EHD. It has started saying "an item named "unnamed.jpg" already exists in this location. Do you want to replace it with the one you're moving? Don't replace/Stop/Replace". I don't know what to do.

Thanks Jim, I kind of thought that was the answer, but was hoping against hope that I was just missing something. Like I said, it's not a big problem. One work around I've found is to name a folder on the external hard drive the same as the name I give the folder to import to and then choose this folder to back up to. I still get a subfolder inside that folder named Imported on...... but at least it's in the folder with my chosen name.
Thanks again,
Jack

How do I get the pictures from my iPhoto on my external Hard Drive to show up in the already existing iPhoto on my MacBook?

I have an early 2008 MacBook. I had been using iPhoto on this MacBook until I purchased an iMac in 2011, at which time I copied my iPhoto Library from my MacBook to my iMac. Then I realized that my pictures and music were consuming the memory on my iMac, so I moved iPhoto and my iTunes LIbrary to an external Hard Drive. Now I am in a situation where I do not have access to my iMac, but will need to use my MacBook as my main computer for the next year. So, I have my iPhoto on an external hard drive and I plug it into my MacBook and see the iPhoto Library folder, but when I click on it, it opens up the old iPhoto that is still existing on my MacBook and will not show any of the new pictures?! At first I thought it wasn't able to show up anything because my MacBook was running two operating systems behind what my iMac was when I was running my iPhoto Library from that computer. So, I upgraded to OS X 10.7.5 and upgraded the existing iPhoto on my MacBook to iPhoto '11 version 9.4.3. However whenever I plug in the external hard drive and click on the iPhoto Library folder to open it up, it is still just opening up the already existing iPhoto on the MacBook (with my older pictures) rather than the iPhoto on the hard drive (with my newer pictures). How can I access my pictures that are on my external hard drive?

Thank you for your advice. I followed your directions, but came up with the same results. However, I did discover that whenever I open up the iPhoto Library that is already existing on my MacBook a certain set of pictures shows up. But then when I open up the iPhoto Library from the Hard drive another set of pictures shows up. BUT not ALL of my pictures are showing up on the iPhoto Library from the hard drive. At least the last two years of pictures are not showing up?! Actually, it appears that all the pictures are there from when I started using iPhoto about 5 years ago up until around the time that I got my iMac desktop computer and started using that (2 years ago). I have noticed that more recent videos I have made are showing up in a folder on the hard drive, but will not appear when I open up iMovie?! Any ideas on how to access my pictures from the last 2 years off of the hard drive???

I plugged in my brand new nano to my husbands desktop to get it registered, but had a problem mid way through when I tried to used an apple login that already existed. Now it's not registered and the computer won't recognize my device. How do I fix this

I plugged in my brand new nano to my husbands desktop to get it registered, but had a problem mid way through when I tried to used an apple login that already existed. Now it's not registered and the computer won't recognize my device. How do I fix this?

iPod not recognized in 'My Computer' and in iTunes for Windows
Call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273) to register your iPod Nano.

Create a Playlist from external folder with tracks already existing in iTunes

I was just wondering if its possible to create a playlist from an external folder (on my desktop) with tracks that already exist in iTunes.
I basically have a folder on my desktop that i use with Serato, i was wondering if it'd be possible to sort a playlist in iTunes with the tracklist from the folder? I already have all the tracks on iTunes so i don't want to add them onto iTunes again just to put them into a playlist as i'd have to sort through all the duplicates to delete the non playlisted tracks (theres around 1500 so it wouldn't be a quick task).
Would be much appreciated if anybody can help!

Hi,
I have an AppleScript that does this.
This script need Spotlight metadata, all files in the folder that you use with Serato should be indexed.
Works well if the tags (name and artist) are defined
In this script :
it will display a dialog to select your folder
iTunes search track from the library playlist according to (artist, album and title in the Spotlight metadata of each file).
If iTunes found a track, iTunes will add this track to the new playlist.
The script takes 35 seconds for 1000 files on an old machine (PowerMac G5 2 X 1.8 GHz) .
This should take less than 100 seconds for 3500 files on the new machine
Here is the script :
-- this script need Spotlight metadata, files in the folder should be indexed
set folderPath to (choose folder with prompt "Select the folder that you use with Serato")
set f to quoted form of POSIX path of folderPath
my makePlaylist(do shell script "/usr/bin/find " & f & " -type f \\! -name '.*' -print0 | /usr/bin/xargs -0 /usr/bin/mdls -name kMDItemTitle -name kMDItemAlbum -name kMDItemAuthors | /usr/bin/sed 'H;$!d;x;s/\\n[^k]//g'")
on makePlaylist(t)
      script o
            property L : paragraphs of t
      end script
      set tc to (count o's L)
      tell application "iTunes"
            set newPlaylist to make new playlist with properties {name:"Serato"}
            set masterLibr to (get first playlist whose special kind is Music)
      end tell
      repeat with i from 2 to tc by 3
            set {tAlbum, tArtist, tTitle} to my getvalue(items i thru (i + 2) of o's L)
            tell application "iTunes" to try
                  set t to (get first track of masterLibr whose name is tTitle and artist is tArtist and album is tAlbum)
                  duplicate t to newPlaylist -- add founded track from the library playlist to the new playlist
            end try
      end repeat
end makePlaylist
on getvalue(tList)
      set oTID to text item delimiters
      set text item delimiters to "\""
      set {alb, aut, title} to {"", "", ""}
      try
            repeat with i in tList -- if line does not contains a double quote then the tag is empty --> = (null)
                  if i starts with "kMDItemAlbum" then
                        tell i to if it contains "\"" then set alb to text item 2
                  else if i starts with "kMDItemAuthors" then
                        set text item delimiters to "(   "
                        -- if artist contains one word, it doesn't contains double quote
                        tell i to if it does not contain "(null)" then
                              if last text item starts with "\"" then
                                    set aut to text 2 thru -2 of (last text item)
                              else
                                    set aut to (last text item)
                              end if
                        end if
                        set text item delimiters to "\""
                  else --kMDItemTitle
                        tell i to if it contains "\"" then set title to text item 2
                  end if
            end repeat
      end try
      set text item delimiters to oTID
      return {alb, aut, title}
end getvalue

Problem "archive name already exists" Outlook 2007

Dear All,
I’m writing to you because I really need help with solving the problem with my MS Outlook 2007 with SP3.
I’m using windows 7 64 bit. I’m using Exchange account.
The problem is when my mailbox on exchange is almost full so I’m making manual autoarchive.
From a few months I have problem with that matter because I have information “archive name already exists”.
I can see the exact path to the archive folder.
I can't create archive with the same name for example archive.pst, all the time during new archivisation I have to change the name of the archive file like: archive1, archive2, archive3….. Now in my mailbox I have something like
5 archivisation folders :(
Can You help me please with that?
Thank You in advance!

I recommend that you post this in the Outlook Forum: http://social.technet.microsoft.com/Forums/en-US/outlook/threads
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Problem in Banking External reconcilation -already exist in Table "OMTH

Similar Messages

Maybe you are looking for