Problem in BAPI_PRODORDCONF_CREATE_TT change status back to PCNF

Hi Abap and functional experts. Problem with BAPI_PRODORDCONF_CREATE_TT. Once Sap production order status changed to CNF for final confirmed OK no problem. But when additional postings the production order status is set back to PCNF from CNF without a cancellation of the final confirmation, which allows another CNF to be set. The bapi does not through an error when the prod order is already closed. Any ideas why this happens.

I am facing the same issue. How did you fix it?

Similar Messages

After restoration of files via time capsule my status changed to "Guest" and I can't find the pass word for changing it back to Registered user. Any Help?

after restoration of files via time capsule my status changed to "Guest" and I can't find the pass word for changing it back to Registered user. Any Help?

Hey mate I had this same problem exept instead of my recording disappearing my Chorus that went for 8 bars extended out to 20 bars lol and I used auto tune on it and it sounds like t-pain on a very bad day so it sounds like it does a few things when it comes up that error

New problem, Lycos Mail is my home page. When I open a new window I usually get Google search, which is what I want. Now, somehow when I open a new window I get Yahoo search. How do I change it back to Google? Thank you, Randy

New problem, Lycos Mail is my home page. When I open a new window I usually get Google search, which is what I want. Now, somehow when I open a new window I get Yahoo search. How do I change it back to Google?
Thank you,
Randy

A new tab opens by default as a blank tab (about:blank).
If that isn't the case then an extension has changed that behavior.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
You can middle-click or hold down Ctrl and left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at this extension to set which page to open in a new tab:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/

Change form CNF to PCNF status

Dear all,
I have one production order with 2 operations.
In the setup I have that the final confirmation will be set automatically, means that when the sum of yeld and scrap quantity reach the total of the operation the final confirmation is set.
Now I have one issue, after I have my last opration with status CNF and my order with status CNF, If I canc el a confirmation of the last operation, but not the confirmation that is flaged as final confirmation, the quantity is reduced, but the status is not changed from CNF to PCNF.
If I can cel the confirmation that is flaged as final confirmation the quantity is reduced and also the status change from CNF to PCNF.
Anyone have one idea how I can have the status also reverted from CNF to PCNF id any of the confirmation is canceled?
Thanks in advance for your help
Best Regards
Manuel Antonio

Dear,
You can change the status from PCNF to CNF but can not change the status from CNF to PCNF.
Please try with CO13 cancle the confirmation and then do confirmation
If you confirm the First Operation with Final Confirm then the operation Status would be CNF and also the Order Status will also be CNF.
So, proceed with other operation confirmations or again partially confirm the first operation with 0 quantity, then the order Status will be PCNF.
Please refer this thread also,
status change from CNF to PCNF urgent
Regards,
R.Brahmankar

I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

Up the top where the three buttons are (red yellow green) are three images. Click on the third image that looks like a notepad (not the first which is a library book), and that should get rid of 'Notes'. To read using two pages make the window bigger.

Problem with iChat changing my custom away message after 30 minutes

Lately, I've been having a big problem with iChat changing any custom away message that I put up to "Away" after 30 minutes or so. Is there anything I can do to make it stop? Another issue I'm having is that sometimes when people on my buddy list change their away message, it doesn't show up on iChat unless I go offline and then sign back on. Any idea why it's doing that, and what I can do to get it to stop?
Thanks.
- Danielle
G3 iMac Mac OS X (10.3.9)

Hi ienjoyanime,
Go to the General Section of iChat Preferences.
Does it say you are set to Go to Away when you log off/QUit iChat ?
is the computer going to Sleep at this point ?
10:59 PM Saturday; April 1, 2006

When i click on the new tab I dont get the google page but some other search engine, how do I change it back to google?

My home page is the default Google page but when i click on open new tab and it loads some other search engine's site instead. How do I change that back to Google? I've checked for any random add-ons but that doesnt seem to be the problem...

Does that still happen is you disable the RadioBar Toolbar?
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

URGENT: Changing status at Header level in Service Ticket in Webclient

Hi All
Please reply ASAP.......
I am changing status for service ticket in webclient at Header level.
But at item level system status is not changing.
Is there any config in CRM where user status or system status is copied from header to item level
Basically need is to trigger item status when header status is trigerred....
Can anyone help me in resolving this issue.
Regards
Pankaj Vispute

Thanks Bhanu,
I solved my problem with your answer.
Thanks,
Praveen

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Itunes 10.6.1.7 problem: when I change the file "media type" from 'Music' to 'Podcast' the file disapears from ITUNES. I do this via (1) right click, (2) select 'Get Info', (3) select 'options' tab, and (4) change media type. What is the problem?

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

Hey! recently my key board settings has changed and now my volume buttons are no longer F10 and F11, now if i want to change the volume i have to do it on the top bar of the screen! how do i change it back to work normally on my wireless keyboard?

Hey! recently my key board settings has changed and now my volume buttons are no longer F10 and F11, now if i want to change the volume i have to do it on the top bar of the screen! how do i change it back to work normally on my wireless keyboard?

Hi, did you upgrade the OS lately?
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php

I made some changes to my header, I did not like the results, so I changed them back and now I cannot edit the content of the page. It is all grayed out..

I was making some changes to my header file. I did not like the results of the changes, so I changed them back. When I did make the change back, I lost the ability to edit the page.

Unfortunately, a picture of the code is not useful.
The best way for us to help is if you put a copy of your problem page on a server and post a link for us.
(rename it to avoid disrupting your live site)
A less desirable method is to copy & paste your code in a post in the the web forum (not by email)
https://forums.adobe.com/thread/1615559

Need a shortcut to "Allow pages to choose their own colors, instead of my selections above option preference" I know where it is and how to use it but I have to go through 7 mouse clicks to change it, then a few minutes later change it back. I also k

Need a shortcut to "Allow pages to choose their own colors, instead of my selections above option preference" I know where it is and how to use it but I have to go through 7 mouse clicks to change it, then a few minutes later change it back. I also know the sequnce is alt t, alt o, alt c, alt a, then ok, ok. Got to be a way to make a one key short cut for this. I use a black background to reduce eye strain, but about 10% of the webpage I go to can't be send with black so I have to go into tools and hit 6 or 7 things to chnage it then after through with webpage have to do it all over at Not allow webpages to have own color. Very very cumbersome.
== This happened ==
A few times a week
== made that way

https://addons.mozilla.org/en-US/firefox/addon/toggledocumentcolors-198916/
The above addon will solve your problem.
Shortcut to toggle user color/page color :- Ctr+Shift+C

Only my email font size has changed....it's gone smaller while everything else including ads is normal size. How do I change it back to 12 pt type?

twice in the past few weeks the font size on my email has changed smaller. The first time it went from 12 pt type to maybe 10 pt type. Last night while I was chatting on Yahoo with our daughter, it went down to maybe 2 pt type. I couldn't find a way to change it back. This morning I opened up the computer to try to work on it again and the font size was maybe 1/2 pt type. The words look like little squiggles on the page. Both my email addresses on Yahoo have reacted the same but the ads to the right of the email on the mail page remain the same size. If I open up another window, and say go to foodtv.com, everything is normal size. I have opened up Safari and gone to my email and everything is normal szie so the problem is the Mozilla. I have also called ATT and gotten help and they couldn't help as it's definitely a Mozilla problem.

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages

Change status(Active/Inactive) of file adapter by the external command

Hi, all.
Is it possible to change status(Active/Inactive) of file adapter by the external command?
Let's say, like
"$ switch_file_adapter_status.sh <File Adapter name> <active|inactive>"
or something like that.
Actually, we have the following requirement for the file adapter.
For example, we have many "file adapter to R/3" scenarios and we only want to allow data transfer between 9:00 a.m. to 9:00 p.m.(R/3 service time).
In order to achieve this requirement, one option would be to switch file adapter status between active and inactive by external command line.
And this command will be controlled by the job scheduler(like Tivoli).
Does XI(3.0 or above) have this kind of feature?
Best Regards.

Hi,
I don't think that this is possible.
But one Solution for your problem could be a job on xi who execute the Queue.
So that Adapter work the hole time and send the Message to XI Queue which process them not automatically.
And the XI Queue you can trigger with a Job like normal R/3 Jobs.
Hope that helps,
Regards,
Robin

Problem in BAPI_PRODORDCONF_CREATE_TT change status back to PCNF

Similar Messages

Maybe you are looking for