Problem in batch determination with Transfer Order

Hello,
I want to use SLED batch determination to supply my shop floor from my central warehouse.
I activate the SLED batch determination procedure for WM and I create the search strategy for movement code 319.
When I convert my transfer requirement in transfer order the batch proposed is the first batch number while it's not the first expired. 
In my TO if I choose to display the Batch determination, the list is well sort by expired date, and so the first batch of the list is the first expired. So why it is not this batch that is proposed in the batch field of my order ?
Thanks for your help.
Laurent.

Hello,
thanks for your answers.
I confirm that the removal strategy is H for the storage type 200 (the warehouse where the component come from).
The search strategy seems to be well maintened because when I display the Batch determination in my TO (Environement/Display Batch det.) , I obtained the list of batch sort by expired date. But in the field batch it still the first batch number that is proposed.
What do you mean by "(i.e. storage type, section are choosen according to Whse & Material master indicator and bins do exist)" ?
Laurent.

Similar Messages

  • Batch determination in Transfer order

    hi ,
    i am trying to create transfer order  for outbound delivery, in that batch determination not triggered. i maintained LS51 batch search strategy , sort rule,condition table ,access sequence and activation of batch search methods to WH and movement type.
    is there anything i have to maintain ......?????
    Thanks
    Muthuraman.D

    HI Ramana,
    Thanks for your reply. i checked automatic batch determination for delivery item category but still batch determination not happend at Transfer order level (WM) . i maintain the below things...
    i)condition table
    ii)access sequence
    iii) strategy types
    iv)search procedure definition
    v)assign search procedure
    vi)maintain the data for batch search strategy.(sortrule,selection class in ls51)
    Is there anything apart from above things  i have to maintain for batch determination at WM level.
    Thanks
    Muthuraman.D

  • Batch Determination with WM manual staging

    Hello,
    I found documentation that suggest to use Pick parts when using batch determination with WM in transfer orders.  However will/can determination be used with Manually staged components inducator 4?
    Thank you

    Hi!
    I am trying to get batched with shelf life larger than 370.
    We are in ECC6.0 and the note applies to releases up to 4.5. I read the note and also tried it but the characteristic does not take a range; only a numberic value. For => 370 I get an error. The date for SLED calculated for batch determination (from the batch determination analysis for a test) as shown below:
    Characteristic   Name                           Characteristic value
    LOBM_ZUSTD       Status of Batch                Released
    LOBM_LVORM       Deletion Ind. for Batches      Not Set
    LOBM_RLZ         Remaining Shelf Life for Batc  370 d
    LOBM_MBDAT       Material Availability Date     07/17/2008
    LOBM_LFDAT       Batch Determin. Delivery Date  07/30/2008
    LOBM_VFDAT       Expiration date, shelf life    08/04/2009
    I wonder if the problem is that the operator does not seem to appear in this criteria for the calculated LOBM_VFDAT?
    Thank you

  • Batch determination at sales order level

    Dear All,
    We are using my sap erp ecc 6.0.We are using the batch determination at sales order level.We had a problem whenever customer requested deliver date is beyond the RLT date then all the old batches which are already assigned and dispatched with some other sales order,that old batches are becoming filled with 999,999,999....(infinity stock).And at the same time it is determining the batch for the sales order line item.
    please help how to stop the old batches filling up with infinity stock.
    regards,
    Hari

    please look into this and throw some light.
    regards,
    Hari

  • Issues during Component Batch Determination for Process Orders

    Hi,
    I am encountering a strange issue during component batch determination of process order.
    1. During creation of process order, when I execute batch determination, systems does determination based on strategies we have set and when I click on Copy it gives an error
    "Log cannot be saved: Object/subobject not specified"
    Message no. BL201
    *Diagnosis
    Log save cancelled because at least one log contains no object or subobject.
    Object and subobject are needed to classify application logs because there are several log types. Only a few logs are managed in main memory at runtime, so this classification is not needed.
    If the logs are to be saved in the database, object/subobject must be specified for later retrieval.
    Procedure for System Administration
    Object/sub object can be passed when a log is created (function module BAL_LOG_CREATE) and changed with BAL_LOG_CHANGE.
    The possible values for object and sub object must be configured in transaction SLG0.*
    If I save the order with CRTD status and come back again in change mode and do determination, It works fine.
    Again when the order is in REL status and do the determination, It gives the same error.
    This happens only for a specific plant, In other plants batch determination works in all scenarios.
    I checked for all plant related Config for batch determination and coudn't find any discrepancies.
    Please advise how to resolve this issue. Thanks in advance for your help
    Regards,
    Aheesh

    There Is no direct solution for your requirement just try this work around.
    While defining the batch determination search strategy for process order in COB1, there is one column Quantity proposal where you can attach the Routines (This is written in ABAB code )  make use of this, define New Routines with ABAB help to fulfill your requirement. Try this if found useful award full points.
    Regards,
    Ajay Nikte

  • Batch determination in Subcontracting order

    Hi,
    Can any one of you explain me the steps for doing batch determination for subcontracting orders. i am facing the same issue, but i dont know what steps to follow.
    our scenario is:  we do a GR against a Sub contracted PO using 101 mvt type and when i am trying to post the document, it's asking me to enter the batch for few components which are maintained as vendor consigned stock and in batches.
    is it possible to automate the process? can any body explain how to setup the customization for batch determination?
    thanks in advance,
    Kanth

    Follow the below steps.
    01. For movement type 543 "O" assign your search procedure T code : OMCG
    02. Maintain conditions record or strategy record.
    A1) Normaly we use batch determination at delivery level, because at the time of order material may or may not be created.for this material should be configured with batch and batch determination should be checked in sales views of material.
    A2) Batch Determination during order Creation.
    For this you need to maintain a Classes d for you Material. Depending on the Manufacturing process you can define the characteristics for your material.
    Ex: Purity for Medicines,  Resistance for Electric Items.
    You need to create a class (You might have to create a new class type) which incorporates the characteristic.
    First Create the Characteristic Using Ct04 and then using Cl02 create the Class  including this characteristic.
    Then in your material master Classification View Enter this class.
    Then Create a Batch for the particular plant and Stor Loc using MSC1N.Give the value of the characteristics in this batch.
    Then go to SPRO ->Logistics General ->Batch Management and maintain the Condition Technique (Procedure, Strategy Types and assignment to sales docs etc).
    Then Create the Batch Determination Record using VCH1.

  • Automatic Batch Determination   in Production order

    Dear All,
    We are using automatic batch determination is based on FIFO (first Mfg first out) for components..After releasing the order.
    I have maintained Batch Class in all the materials which are used as a all material special Characteristic LOBM_HSDAT as a one of the class characteristic. as we want batch determination  on GR date for few material and for few material LOBM_VFDAT for self life material and its class.
    Then create Sort Rule CU70 mainatained the same LOBM_HSDAT in it. and one with LOBM_VFDAT.
    Then create Batch serch Strategy (USE T.Code COB1- search strategy CO01the respective sort rule and selection critoria.for All ROH HALB and Finish material.
    In Material Master of all component in MRP 2 view select value 3 (Automatic Batch Determination) for BATCH ENTRY. All ROH HALB and Finish material
    After mainting above all prerequisite I should able to do the Automatic Batch Determination as per my selection Rule.
    But Automatic Batch Determination  in Production order after release is not working.
    Please need your help.
    Regards,
    Manish
    Edited by: manish gurnule on Dec 30, 2008 5:26 AM

    Dear,
    Define the batch determination search strategy for process order in COB1 with sort rule in CU70.
    On the initial screen of your application choose Logistics>centrel function>batch management>Batch determination>For process order -->Batch search strategy --> Create.
    On the initial screen of your application choose Batch search strategy -->Create.
    Choose the strategy type, say choose co02
    Choose the key combination-
    Enter the required dat-->say plant ,production order type, product,valid from and component for which you want to have this
    Choose Selection criteria push button. Choose a sort sequence.
    If no values have been entered, enter the selection class and the characteristic values.
    Go back to the screen on which you create a batch search strategy.
    Choose Sort if required(it should be defined earlier(in CU70- here you are giving the charateristic name on which you want to sort)
    For component you need to use MBC1 with search stratgey as ME01 for your plant movement type and material and assign the sort rule and search procedure here.
    Check also in COR4, for the combination of plant and order type...you have selected search procedure-CO0001
    Batch management> Batch serach procedure allocation and check activation
    T.Code to be looked specifically OMCG , CORC
    Hope it will help you.
    Regards,
    Madhu

  • Batch determination in Sales order

    Greetings. I have an issue. Actually we are doing standart batch determination in sales order. But that determination doesn't fit our needs. So, we want to do that batch determination with a user exit ('cause we just did it in the deliveries), but I can't find the exit in the program of sales order creation (SAPMV45A).
    Someone knows where can I find that exit? Is that program which I had to look?
    Thanks a lot.

    Hi Rodriguez,
    Please try with these User Exits
    Program  MV45AFZZ   
    USEREXIT_SAVE_DOCUMENT                                                       
    Use this user exit to fill user-specific statistics update tables.           
    The user exit is called up by the FORM routine BELEG-SICHERN before          
    the COMMIT command.                                                          
    Note                                                                         
    If a standard field is changed, the field r185d-dataloss is set to           
    X. The system queries this indicator at the beginning of the safety          
    routine. This is why this indicator must also be set during the              
    maintenance of user-specific tables that are also to be saved.                                                                               
    USEREXIT_SAVE_DOCUMENT_PREPARE                                               
    Use this user exit to make certain changes or checks immediately             
    before saving a document. It is the last possibility for changing or         
    checking a document before posting.                                          
    The user exit is carried out at the beginning of the FORM routine            
    BELEG_SICHERN.  
    I hope it will help you,
    Regards,
    Murali.

  • Automatic batch determination in process orders

    Hi,
    How batch determination can be done automatically for components in process orders?
    regards,
    Mohit Goyal

    Dear,
    Define the batch determination search strategy for process order in COB1 with sort rule in CU70.
    On the initial screen of your application choose Logistics>centrel function>batch management>Batch determination>For process order -->Batch search strategy --> Create.
    On the initial screen of your application choose Batch search strategy -->Create.
    Choose the strategy type, say choose co02
    Choose the key combination-
    Enter the required dat-->say plant ,production order type, product,valid from and component for which you want to have this
    Choose Selection criteria push button. Choose a sort sequence.
    If no values have been entered, enter the selection class and the characteristic values.
    Go back to the screen on which you create a batch search strategy.
    Choose Sort if required(it should be defined earlier(in CU70- here you are giving the charateristic name on which you want to sort)
    For component you need to use MBC1 with search stratgey as ME01 for your plant movement type and material and assign the sort rule and search procedure here.
    Check also in COR4, for the combination of plant and order type...you have selected search procedure-CO0001
    Batch management> Batch serach procedure allocation and check activation
    T.Code to be looked specifically OMCG , CORC
    Hope it will help you.
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Nov 11, 2008 11:31 AM

  • Automatic Batch determination in Sales Order

    Dear Experts,
    I have the following problem : When inserting a material in a sales order, batch is automatically determined correctly. (I have customized batch determination through plant). Before saving the order, if I delete the plant and entered a new one, by pressing enter, the batch is not being automatically determined, although  it should. I have to press item batch determination button , in order to determine it again.
    Thank you in advance for your help.
    Dina

    Hi Dina,
    I guess that either this is the way it works, or there's an SAP note to fix it.
    I'd suggest that you first look for a note in the service marketplace, and if you don't find one, create a ticket in OSS.
    Regards,
    Mario

  • Filter for batch determination of production order

    Filter for batch determination of production order
    Dear guru ,
    We trigger batch determination manually for every production order using CO02.
    How can I understand whose are the production orders arenu2019t taking place batch determination?
    Checking all the production orders is too heavy ?
    Does exist a massive transaction (coois or others)  where I can select the production orders with components not assigned to the batch ?
    Thanks in advance

    Hi
    In COOIS > In the initial screen select  Documented Goods movement  in the list Field along with and other selection criteria and run the Report
    In the list of orders > Expand corresponding order to view Documented goods movements list with the components with and w/o batch numbers
    Regards
    Brahmaji

  • Batch determination in sales orders

    Hi,
    I have 2 questions related to batch handling in sales:
    1. Can anyone list the pros and cons of having batch determination done in the sales order instead of at the time of delivery creation? Please describe in detail and do not just copy and paste the SAP standard explanations. Experiences are very welcome.
    2. If I do batch determination in sales order, how do I make sure that the specific batch is there for delivery? In the ATP there is no such filed to include or exclude batches for a material, so I wonder - how is the batch reserved when entering it in the sales order? Please describe the reservation mechanisms if any.
    Thanks in advance,
    Lars

    Lars Tornblom,
    1.  Can anyone list the pros and cons of having batch determination done in the sales order instead of at the time of delivery creation?
    We Can proceed with Batch Determination at sales order there is nothing wrong in it. The Batch that you determine at the order level remains the same in delivery. The batch gets copied in the delivery level.
    1. You cannot change the Batches at Delivery level.
    2. Batch Split is not possible at Order level. (Since BAtch split CHSP is available only at Delivery level)
    2. If I do batch determination in sales order, how do I make sure that the specific batch is there for delivery?
    Based on Copy controls the Batches that you have mentined at order level gets copies to Delivery. you cannot chenge the batch.
    That is the reason why we proceed with Batch management at Delivery process, wherein we can choose the Batch Manually OR Go for Automatic Batch.
    You can also perform Batch Split, Choose the Materials from the batch. that's having stock.
    3. In the ATP there is no such filed to include or exclude batches for a material, so I wonder - how is the batch reserved when entering it in the sales order? Please describe the reservation mechanisms if any
    We activate the Batch Management Indicator in The Material master - Sales: General data View. and proceed with Batch configuration in Logistics General. The Batch concept is managed by three modules MM,SD and PP. So its an integration point.
    In the case you have suggested that Batch will be carried from Sales order, now the stocks are created in batches and stored in storage location. so the batch should exists before you raise an order then only you can confirm.
    If no Batches are aintained and you are trying to enter batch in sales order it will throw an error stating "No Batches Maintained".
    If Batches are there for the material then it will be assigned. If batches are not existing then it will throw an error as explained above.
    Regards
    Sathya
    Edited by: Sathya Pavan Yedavalli venkata on Apr 27, 2009 8:42 AM

  • Issue regarding Batch determination in Production order as per Expiry date.

    Dear all,
                    first of all  happy Navratri.
    I have issue regarding batch determination in production order.
    I have to compare P.O header materialu2019s expiry date and issuing components expiry date at the time of batch determination.
    lets take example,  Material having self life is u201CXu201D years and batch determination against PO is based on FEFO with the help of self life we can determine Expiry date of manufacturing material  suppose it is u201CYu201D  I have to introduce restriction at the time of good issue if expiry date of issuing components u201CZu201D is less than expiry date u201CYu201D.
    Please give your valuable suggestions either standard or through SAP enhancements.
    thanks & Regards
    SIVA

    Dear
    Thanks for your reply, i am layman about batch derivation can u elaborate it.
    Thanks & Regard

  • FEFO logic in batch determination for process order release

    Batch determination for a particular material in a process order was following FIFO logic . We needed to change it to FEFO hence we made the necessory changes in COB1 how ever the process order relase is still taking the batch whihs is not the first expiry batch
    Kindly help in batch determination with FEFO for process order release.

    Rk
    The blw explation for inventory side, i don't have idea for prod order side
    If Batch Management is active for the materials then use following process;
    First create characteristic in CT04 for Batch Creation Date, under "Addnl data", enter Table Name MCH1 or MCHA (As per Batch Class 022 or 023) and Field ERSDA and save it.
    Assign this characteristics in CL02 in your Batch Class.
    CU70 - Create a Sort Rule and specify the Characteristic of Batch Creation Date and activate "Ascending" indicator.
    Now assign the Sort Rule in MBC1 and keep Selection criteria as "O" for the Strategy type.
    Now do batch determination in MIGO.

  • Batch Determination in Production Order Component Overview Screen on the basis of FIFO, Thickness, Grade, width etc.

    I am facing a difficult scenario. Pl. help me out. In my Business Process I am assigning Batches in Production Order Component Overview Screen. Here I am assigning relevant batches to BOM Components manually, My Management want SAP to suggest batches automatically on FIFO basis, thickness, grade, width & first batches should automatically assign to Production order.  Can you pl. tell me how to configure this scenario.
    Or can I pull stock overview screen at Production Order Component screen to assign relevant batch to BOM Components
    Once batches assigned in Production Order component screen cannot be changed. It can be changes by specific persons only.

    Hi,
    Automatic Batch Determination for production order components is possible by configuration.
    You can also refer below discussions to map your scenario.
    Batch determination in production order | SCN
    Automatic Batch Determination in Production order
    Regards,
    Naresh

Maybe you are looking for