Problem in BD64 for HRMD_ABA message type

Hi,
Iam using HRMD_ABA Message Type in distribution model(BD64).
My requirement is that i want to add status of the employment in the Filter Group.
i.e.: in BD64 transaction>under HRMD_ABA>data filter active>filter group>infotype-->(will be 0000)
-->Object type(Will be 'P' for person)
Now where i will put status value as '3'.....?
Thanks in advance..
Regards.

HI,
it seems you have to add new filter objects.
Check tcode BD95 and BD59 to add new filter objects.

Similar Messages

Transfer Custom OM Infotype data through ALE for HRMD_ABA Message type

Hello Folks,
I have created a Custom OM Infotype.When i run the PFAL transaction. All the standard infotype data is getting filled, but i dont see custom infotype data getting filled.
Example: HRP9001 is the custom infotype.
Please let me know the step by step process to populate the Custom infotype data in ALE Transfer.
Thanks & Regards,
Nishanth Kumar

I think function module RH_MASTER_IDOC_DISTRIBUTE_HRMD shows some odd behaviour. It calls EDI_DOCTYPS_OF_MESTYP, which returns the name of the extension in an internal table named "doctyps". But later on, function module MASTER_IDOC_DISTRIBUTE is called with a structure "f_idoc_control". In this structure, the field "cimtyp" should hold the name of the extension, but it NEVER gets filled, although the value is present in doctyps-cimtyp.
So what I have done, is to activate userexit #004, which is called just before MASTER_IDOC_DISTRIBUTE and modifies structure f_idoc_control, if desired.
Call transaction CMOD and create a project in a non-SAP namespace: Zxxxx. The enhancement we need is "RHALE001" (HR-CA: Enhancement for ALE functionality in HR). One of its components is EXIT_SAPLRHA0_004, which consists of include ZXHALU08. In this include I called EDI_DOCTYPS_OF_MESTYP again to fill f_idoc_control-cimtyp.
Here is my code for include ZXHALU08
DATA: z_doctyps TYPE STANDARD TABLE OF edidocs WITH HEADER LINE.
CALL FUNCTION 'EDI_DOCTYPS_OF_MESTYP'
EXPORTING
    mestyp         = f_idoc_control-mestyp
TABLES
    doctyps        = z_doctyps
EXCEPTIONS
    invalid_mestyp = 1
    OTHERS         = 2.
IF sy-subrc = 0.
LOOP AT z_doctyps.
    f_idoc_control-cimtyp = z_doctyps-cimtyp.
ENDLOOP.
ENDIF.
Hope this helps

IDoc Error: No recipient found for IDoc message type in the ALE model...

Hello Experts,
I just created an IDoc for purchase orders and when I try to test it after releasing
the PO, an error is shown in the processing log saying that there are no recipients
found for my message type of the IDoc. I refrenced it against a working IDoc but I might be
missing something.
Hope you can help me guys. Thank you and take care!

hi,
in bd64 ,goto change mode select ur distribution model and click add message type define ur logical systems and message type and save.
thn goto environment - partner profiles - f 8.it will show whether model is created or any errors.
then go back edit - model view - distribute.
reward points if hlpful.

Need help for new message type for PO archiving

Hello All
I have configured new message type ZARR for PO archiving process. After configuring all the steps this condition is not getting picked to by itself. And after maintaing it manually it is giving red flag without any error message. Here I am listing all the step that I have followed for config. Please help me am I missing something or any parameter is wrong.
Steps for new Message Type for PO Archiving
1.     Defined new Table 513 Purch.Org./Plant.
2.     Defined new access sequence Z513 Access Sequence for Archiving.
Following are parameters to the Access Sequence
Access Sequence Number = 21
Table = 513
Description = Purch.Org./Plant
Requirement = 101
Exclusive = Yes (box checked)
3.     Maintain Output Type ZARR for PO
General Data
Access Sequence = Z513
Access to condition (Checked)
Multiple Issuing (Checked)
Program = FM06AEND
FORM Routine = CHANGE_FLAG
Default Values
Dispatch Time = Send Immediately (when saving application)
Transmission Medium = Print Out
Storage System
Storage Mode = Archive Only
Document Type = ARCHIVE
Mail Title and texts
Language = EN
Title = Archiving for Legal Requirement
Processing Routines
Transmission Medium = 1 (Print Out)
Program = SAPFM06P
Form Routine = ENTRY_NEU
Form = ZJ_9H_MEDRUCK
Partner Roles
Medium = Print Out
Funct = VN
Name = Vendor
4.     Fine-Tuned Control: Purchase Order
Oprat. = 1
CType = ZARR
Name = Testing for Archivin
Short Text = New
Update Print Related Data = Yes (checked)
Oprat. = 2
CType = ZARR
Name = Testing for Archivin
Short Text = Change
Update Print Related Data = Yes (checked)
5.     Maintain Message Determination Schema: Purchase Order
Procedure RMBEF1
Step = 100
Cntr = 1
CTyp = ZARR
Description = Testing for Archivin
Requirement = 101
6.     Assign Schema to Purchase Order
Procedure RMBEF1
7.     Define Partner Roles for Purchase Order
Out. = ZARR
Med = 1 (Printout)
Funct = VN
Name = Testing for Archivin
Name = Vendor
8.     Test Condition Maintained in MN04 (Master Data)
Purch. Org. = 0001
Plant = 24
Partner Funct = VN
Medium = 1 (Printout)
Date/Time = 4 Send immediately (when saving application)
Output Device = HUL1
Storage Mode = Archiving only
Thanks
Ankit

the problem is the Exclusive = Yes indicator in the access sequence.
Your other message has this exclusive indicator as well.
so if the first message is found, then no other message wil be determined
to allow several messages in one PO, you must not set this exlusive indicator

How to add custom infotype in ALE for HRMD_A message type

Hi Friends-
Pls help me for our req we are using HRMD_A Message Type for HR master data but now we need to add one custom infotype ( 9902 ) also in standard ALE filters for this message type how i can do that pls let me know ?
<<removed_by_moderator>>
Regards
Meeta & Glory
Edited by: Vijay Babu Dudla on Dec 14, 2008 11:38 PM

Hi
Thanks for your support,
Pls let me know which steps i should go ? my secanrio is inbound side only,
step 1 ) Define idoc extension for HRMD_A01 using WE30 transaction and define it in partner profiles
step 2) do i need to write some code in BADI also to update information for my custom infotype also if yes then where and which BADI pls let me know ? because already am working on one badi HRALE00INBOUND_IDOC for few validation for incoming data.
step 3 ) add this new custom infotype in my standard ALE filters.
Pls let me know if am mistaking some where or if i have to do some thing else ?
Regards
Meeta & Glory

IDOC Segment missing for MATMASS Message type

Through change pointer program for the message type YAUIHUBMATMAS IDOC is triggered.
1) Change pointers are defined in system for the message type T Code u2013 BD52.
2) If respective field is changed in material master , this data is stored in change pointers table BDCP.
3) Background jobs are scheduled every day, which searches for the changes pointer table and triggers the idoc.
In our case IDOC is getting generated but with one segment missing.
We have analysed the succesful and failed IDOC and found desrepency is field updation of BDCP table.
Succesful case contain material number in object value of ZZMDST field where as failed contain some other value.
Can anyone please help us to guide how the BDCP table is updated and the values are mapped in it or any other suggestion to find why the segment is missing in it.
Regards,
Roshni.

Jürgen L. wrote:
> I have never seen a YAUIHUBMATMAS IDOC, nor a ZZMDST field .
> This seems to be home made.
>
> You are expecting that standard SAP programs are generating change pointers for your z-fields?
> Do you see a change history in material master for your z-field?
>
>
> follow the slution from this thread:
>
Yes ,This is a Z -field.
Change pointer is triggering the idoc fo this Z-field but in some cases one segment is missing .
This is z-field in the basic data view of material master.
Yes , we have checked the change history in material master for this field it is getting updated there in BDCP table as well but in BDCP table if this field is flagged then object value is not contain material number instead it contain some other number .
But in case of succesful IDOC the object value is same as material number.
Regards,
Roshni

Create 2 outbound Idocs for 1 message type

Hi Experts,
We are sending an outbound Idoc of message type DESADV. We would like to trigger 2 Idocs per Shipping Notification.
Could you please help?
Thanks,
Vitish.

Hello Vitish
Each output partner can have it's own output. Also for the same message type. Maybe the 2 DESADV IDOC's are sent to different partners or destinations. But even when not you still can define 2 different output partners for the message type. Then 2 outputs will be triggered for the same message type.
Regards Jack

Finding Process Code for a message Type

Hi,
Is there any way to find process code for a specific message type.
Message Type WFRESOURCE_CHANGEAVAILABILITY

Hi Swathi,
I have already mention the process codes that can be used for this message type. For your convenience i am also attaching th description ,which process code can be used when.
ABI_AIDN_IN     Auto- ID Idoc process
ED00                Display Idoc using work item
ED00_XML        Display idoc using work item (xml)
ED08                Forward idoc
ZABI_DLV_IN    Delivery advice ( AIDDESADV with DELVRY04)
Regards
Vinod

Filter Infotypes based on Company Code for the Message Type HRMD_A

Hi,
I have a requirement to send different infotypes for different Company codes using the same distribution model for the message type HRMD_A.
Example :
For the BUKRS 2500 I need to send infotype 0000 ,0002,0006
For the BUKRS 2600 I need to send infotype 0000 ,0008,0009
It will be a great help for me if any one can guide me on that.
Regards,
Raka

Hi ,
Thanks for the reply.
I alredy have done that . But its not working.
Its working only for infotype 0001.
If the infotype is there in any of the filter groups, the data will be sent irrespective of the Com Code.
Regards,
Raka

Problem to create change pointer for custom message type - Idoc creation

Hi,
We want to create IDOC and send it out when the data of "planning calendar" changes. So we are trying to generate change pointers whenever entries in Table T439I (Planniing calendar) data change.
We created a message type, activated change pointers generally and maintained change relevant fields for message type (not sure if this step is done correctly). But not getting any change pointer in table BDCP2 when I create a new planning calendar in MD25.
Can anybody help / guide?

Thanks once again,
I had linked idoc type and message type in we82. Now after i activate the change pointers. I try to generate the IDOC type using BD21. It gives me the error message :<b> "Message type ZP2PPROJ_MSG cannot be sent with change pointers"</b>
whereas in my segments i am using all the master data only (i.e. PRPS, PROJ,PRHI). Please throw some light on this.
Also please clarify, do i need to make an entry of this custome message type in the partner profile ?
Rgds
kewal.

Change Pointers -- HRMD_ABA message type

Hello, there..
I'm using for a while with the message type HRMD_ABA in order to transfer organizational data from one system to another via Idocs and It works fine.
Recently we had defined 2 new infotypes & added them in BD64 transaction (distribution model).
In spite of the changes mentioned above, updates with the new infotypes of an organizational objects such as positions don't create the change pointers.
It must be somthing I forgot.
Does anyone have an idea what I suppose to do ??
Thanks in advance,
R.R.

dfgd

Inbound Idoc for own Message type

Dear All,
I have created a message type for outbound and sent data to the Java System.But when distributing in BD64 inbound parameters are not getting created.
For inbound idoc if i am creating a new message type,How i can get data from external server and commit it in database.
We have to write any program as we do for outbound?
Another issue outbound idoc is in waiting status i have to process it in BD87.How i can sent it immediately and in partner profile, distributing in module view BD64 i have given Transfer IDoc Immediately.
PLZ reply ASAP.
Thanks & Regards,
Arun.

Dear rhea,
I want to receive the IDOC data for message type WPUUMS from a java server. Currently i am working on sample values for segments
E1WPU01
E1WPU02
E1WPU03
E1WPU04
E1WPU05
E1WXX01
I am facing problems in passing the correct values .
Its throwing a error message status 51.(Application document not posted) IDoc not fully processed.
can you help me with some dummy data for all the fields in the above segments.
reply ASAP
regards
arun

Change pointers for custom message type

Hi All,
Please help me with questions.
1. The requirement is to add two additional fields to CSCK table and then activate change pointers for COSMAS. My question is when I activate the change pointers for COSMAS will it send this two z fields when there is a change?
2. I dont see a message type in BD50 for a standard IDOC Internal_order? Can I add that standard message type? How can I do this? WIll this create an IDOC when ever there is a change in data?
Thanks.

Hello Oscar,
1. Which changes should be relevant for creation of COSMAS-IDoc, you have to define in BD52.
2. You need to define INTERNAL_ORDER in WE20. In BD64 you add BAPI "InternalOrder.SaveReplica", filters can be added.
Best Regards, Dirk

Distribution model. Create filters for custom message type.

Hello,
I have created a model view, and added a new message type (copy of HRMD_A). I want to add filters, but the system does not allow it. Do you know if I can only add filters to a standard message type, and not to a custom one?
Thank you,
Elena.

Thanks for your answer, but I think I didn't explain my question well.
I have created a message type ZHRMD_A, and a basic type ZHRMD_A07 (both copies of HRMD_A and HRMD_A07)
I am creating the distribution model, in transaction BD64.
I created the model view.
I inserted my messsage type.
Now I want to add filters to the message type in the distribution model. When I add a standard message type, I can see under the message type the text 'No filter set'. Then I double click this text, and I can add filters. When I add the custom message type, I don't see this text, and I have no option to add filters. That's why I think I cannot add filters to a custom message type.

Bapi for creating message type in a sales order

Hi, I am involved in a IS-MAM project for an italian company.
I need to create or add a message output type in a sales order in a complex batch program. I thought to use a bapi technicality; in particular BAPI_ADMGMTSO_CHANGE in order to change the document.
How can I create message type in the order? Can I use the same bapi or I need of an other one?
thanks in advance for your help
Lucia

Can you please provide more information...

Problem in BD64 for HRMD_ABA message type

Similar Messages

Maybe you are looking for