Problem in bdc session method for tcode FS00

Hi Experts,
problem in bdc session method, when i run this program no output is shown.
Even it is not calling the transaction.
code as follows.
*& Report Z_GL_MASTER
*& CATEGORY         = BDC.
*& DESCRIPTION      = UPLOADING G/L MASTER RECORDS.
*& TECHNICAL CONST = FRANCIS REDDY.
*& FUNTIONAL CONST = FICO.
REPORT Z_GL_MASTER.
*& Internal Table
DATA : BEGIN OF IT_UPLOAD OCCURS 0,
       SAKNR LIKE GLACCOUNT_SCREEN_KEY-SAKNR,          " ACCOUNT NUMBER.
       BUKRS LIKE GLACCOUNT_SCREEN_KEY-BUKRS,          " COMPANY CODE.
       KTOKS LIKE GLACCOUNT_SCREEN_COA-KTOKS,           " ACCOUNT GROUP.
       XPLACCT LIKE GLACCOUNT_SCREEN_COA-XPLACCT,       " P&L STATEMEMENT.
       GVTYP LIKE GLACCOUNT_SCREEN_COA-GVTYP,          " P&L STATEMENT TYPE.
       XBILK LIKE GLACCOUNT_SCREEN_COA-XBILK,           " BALANCE SHEET STATEMENT
       SHORT LIKE GLACCOUNT_SCREEN_COA-TXT20_ML,        " SHORT TEXT.
       LONG LIKE GLACCOUNT_SCREEN_COA-TXT50_ML,         " LONG TEXT.
       WAERS LIKE GLACCOUNT_SCREEN_CCODE-WAERS,         " ACCOUNT CURRENCY.
       XSALH LIKE GLACCOUNT_SCREEN_CCODE-XSALH,         " ONLY BALANCES IN LOCAL CURRENCY.
       MITKZ LIKE GLACCOUNT_SCREEN_CCODE-MITKZ,         " RECONCILATION ACCOUNT FOR ACCOUNT TYPEGLACCOUNT_SCREEN_CCODE-MITKZ
       XOPVW LIKE GLACCOUNT_SCREEN_CCODE-XOPVW,         " OPEN ITEM MANAGEMENT.
       XKRES LIKE GLACCOUNT_SCREEN_CCODE-XKRES,         " LINE ITEM DISPLAY.
       ZUAWA LIKE GLACCOUNT_SCREEN_CCODE-ZUAWA,         " SORT KEY.
       FSTAG LIKE GLACCOUNT_SCREEN_CCODE-FSTAG,         " FIELD STATUS GROUP.
       XGKON LIKE GLACCOUNT_SCREEN_CCODE-XGKON,         " RELAVENT CASH FLOW.
       END OF IT_UPLOAD.
*& Internal Table FOR BDC DATA.
DATA : IT_BDCDATA TYPE BDCDATA OCCURS 0 WITH HEADER LINE.
*& DATA DECLARATIONS.
DATA : V_FILE LIKE RLGRAP-FILENAME.
*& SELECTION SCREEN.
PARAMETER : P_FILE LIKE V_FILE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
     PERFORM GET_FILENAME.
START-OF-SELECTION.
      PERFORM UPLOAD_DATA.
      PERFORM BDCDATA_OPEN.
      PERFORM BDC_POPULATE.
      PERFORM BDC_CLOSE.
*&      Form GET_FILENAME
form GET_FILENAME .
CALL FUNCTION 'F4_FILENAME'
   EXPORTING
     PROGRAM_NAME        = SYST-CPROG
     DYNPRO_NUMBER       = SYST-DYNNR
     FIELD_NAME          = 'P_FILE'
   IMPORTING
     FILE_NAME           = P_FILE.
endform.                    " GET_FILENAME
*&      Form UPLOAD_DATA
form UPLOAD_DATA .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = P_FILE
   FILETYPE                      = 'DAT'
TABLES
    data_tab                     = IT_UPLOAD.
endform.                    " UPLOAD_DATA
*&      Form BDCDATA_OPEN
   FORM FOR BDC_OPEN_GROUP.
form BDCDATA_OPEN .
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
   CLIENT                    = SY-MANDT
   GROUP                     = 'GLMASTER'
   HOLDDATE                  = SY-DATUM
   KEEP                      = 'X'
   USER                      = SY-UNAME.
endform.                    " BDCDATA_OPEN
*&      Form BDC_POPULATE
POPULATING BDC DATA .
form BDC_POPULATE .
loop at it_upload.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=ACC_CRE'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_KEY-SAKNR'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_KEY-SAKNR'    IT_UPLOAD-SAKNR.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_KEY-BUKRS'    IT_UPLOAD-BUKRS.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=2102_GROUP'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_COA-KTOKS'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-KTOKS'    IT_UPLOAD-KTOKS.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-XPLACCT' IT_UPLOAD-XPLACCT.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=2102_BS_PL'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-GVTYP'    IT_UPLOAD-GVTYP.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-XBILK'    IT_UPLOAD-XBILK.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_CURSOR' 'GLACCOUNT_SCREEN_COA-TXT20_ML'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-TXT20_ML' IT_UPLOAD-SHORT.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_COA-TXT50_ML' IT_UPLOAD-LONG.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=TAB02'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-WAERS' IT_UPLOAD-WAERS.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XSALH' IT_UPLOAD-XSALH.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-MITKZ' IT_UPLOAD-MITKZ.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XOPVW' IT_UPLOAD-XOPVW.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XKRES' IT_UPLOAD-XKRES.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-ZUAWA' IT_UPLOAD-ZUAWA.
PERFORM BDC_SUB1 USING 'X' 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM BDC_SUB2 USING 'BDC_OKCODE' '=TAB03'.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-FSTAG' IT_UPLOAD-FSTAG.
PERFORM BDC_SUB2 USING 'GLACCOUNT_SCREEN_CCODE-XGKON' IT_UPLOAD-XGKON.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
    TCODE                  = 'FS00'
   TABLES
     dynprotab              = IT_BDCDATA.
endloop.
endform.                    " BDC_POPULATE
*&      Form BDC_CLOSE
FORM FOR CLOSING BDC_GROUP
form BDC_CLOSE .
CALL FUNCTION 'BDC_CLOSE_GROUP'.
endform.                    " BDC_CLOSE
*&      Form BDC_SUB1
   FORM FOR BDCDATA.
form BDC_SUB1   USING A B C.
CLEAR IT_BDCDATA.
IT_BDCDATA-DYNBEGIN = A.
IT_BDCDATA-PROGRAM = B.
IT_BDCDATA-DYNPRO =   C.
APPEND IT_BDCDATA.
endform.                    " BDC_SUB1
*&      Form BDC_SUB2
      text
form BDC_SUB2   USING A B.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = A.
IT_BDCDATA-FVAL = B.
APPEND IT_BDCDATA.
endform.                    " BDC_SUB2
Points will be rewarded.
Thanks in advance.
Francis.

Hi,
Once the program is executed..It will a BDC session..
THen you have to use the transaction SM35..To process the BDC session..
Thanks,
Naren

Similar Messages

Error In BDC when uploading for tcode FS00

Hi Experts,
problem in uploading BDC session method for tcode FS00. when i run my program it is giving apopup error message that (BDC_INSERT screen invalid)
but my screen number is correct. i have checked this in recording program also.
THere are subscreens in this iam not using any subscreen numbers in my program.
Points will rewarded.
Thanks in advance.
Francis.

Hi Francis,
Check your T-code which u mentioned in that FM bdc_insert. Mostly the problem with that FM only. Check the coding for rrecording, if u miss the coding for any record then you may get problem.
Hope this helps you.
Regards,
Kumar

Problem in BDC Session method!

HI Experts,
I am executing sales order (VA01) ZBDC function module in call transaction method which can be created both Foreground & Background Methods.The mentioned functional module will execute successfully while giving long text in sales order header data.
If I executes above bdc in session method of background,it's showing error while giving the long texts.If I execute Foreground in session method then the sales order is creating successfully.
If I use SHDB for creating new recording with bdc function module for va01 tcode with out taking text tab on sales order header level then that function module in session method of both foreground & background Is executing and the sales order is generated successfully.
Regards,
Hari

Hi Madduri,
Please ask this question on the abap forum. There you would find your answers. As far as your problem is concerned i am living with the same issue. It just refuses to run the in the background so i am running in the foreground.
Rgds
joel

Bdc session method

Hi all ,
where BDC_OK fields will store in which table .
and also how to reslove the screen resolution in bdc session method .
Regards ,
Kiran .

hi
to maintain Screen Resolution just try this
in the BDC Program source code u will find
include BDCRECX1 just double click on it,u can see the selection screen of BDC
and form definitions for Open_Group ,BdcTransaction & CloseGroup,since it is a std include program
u cannot change it so copy this to a Z include and use that Z include instead of BDCRECX1
Then go to form BDCTRANSACTION using TCODE
in that form Declare a workarea(eg: opt) of structure type CTU_PARAMS
data:   messtab like bdcmsgcoll occurs 0 with header line.
data : opt type ctu_params.
pass the values to it
dismode-> Processing mode (A,E,N,P)
updmode-> Update mode (L,S,A)
defsize-> Default Screen Size (X) to maintain Screen Resolution
opt-dismode = ctumode.
opt-updmode = cupdate.
opt-defsize = 'X'.
if session = 'X'.
    call function 'BDC_INSERT'
     exporting
       tcode                  = tcode
       ctuparams              = 'OPT'
      tables
        dynprotab              = bdcdata.
else.
    refresh messtab.
    call transaction tcode using bdcdata options from opt messages into messtab.
endif.
Regards

BDC SESSION METHOD EXPLAINED

Hi,
Eplained BDC Session Method
flat file upload into sap

ABAP BDC SESSION METHOD SAMPLE CODE
pool of form routines
include zmppn001.
Define BDC Table Structure
data: begin of itab_bdc_tab occurs 0.
include structure bdcdata.
data: end of itab_bdc_tab.
Input record layout of Leagcy File
data: begin of itab_xcel occurs 0,
matnr(18) type c,
werks(4) type c,
alnag(2) type c,
verid(4) type c,
text1(40) type c,
bstmi like mkal-bstmi,
bstma like mkal-bstma,
adatu(10) type c,
bdatu(10) type c,
stlal(2) type c,
stlan(1) type c,
serkz(1) type c,
mdv01(8) type c,
elpro(4) type c,
alort(4) type c,
end of itab_xcel.
data: begin of lt_pp04_cache occurs 0,
matnr like itab_xcel-matnr,
werks like itab_xcel-werks,
alnag like itab_xcel-alnag,
plnnr like mapl-plnnr,
arbpl like crhd-arbpl,
ktext like crtx-ktext,
end of lt_pp04_cache.
data: v_ssnnr(4) type n,
v_lines_in_xcel like sy-tabix,
v_ssnname like apqi-groupid,
v_trans_in_ssn type i,
wa_xcel LIKE itab_xcel,
l_tabix like sy-tabix,
v_matnr like rc27m-matnr,
v_plnnr like mapl-plnnr,
v_plnal like mapl-plnal,
v_tcode like sy-tcode value 'C223',
v_plnty like plas-plnty value 'R',
v_objty like crhd-objty value 'A',
v_plpo_steus like plpo-steus value 'PP04',
v_verwe like crhd-verwe value '0007'.
Parameters
selection-screen: skip 3.
selection-screen: begin of block 1 with frame.
parameters: p_name like rlgrap-filename
default 'C:\My Documents\InputFile.txt'
obligatory,
bdc session name prefix
p_bdcpfx(6) default 'ZPVCRT'
obligatory,
number for transction per BDC session
p_trnssn type i
default 2000 obligatory,
retain the BDC session after successfull execution
p_keep like apqi-qerase
default 'X',
user who will be executing BDC session
p_uname like apqi-userid
default sy-uname
obligatory.
selection-screen: end of block 1.
possible entry list (F4 dropdown) for input file name
at selection-screen on value-request for p_name.
*-SELECT FILE FROM USERS LOCAL PC
call function 'WS_FILENAME_GET'
exporting
DEF_FILENAME = ' '
def_path = 'C:\Temp\'
mask = ',.,..'
mode = 'O'
title = 'Select File '(007)
importing
filename = p_name
RC =
exceptions
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
others = 5.
if sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
begin the show
start-of-selection.
read data from input file
perform transfer_xcel_to_itab.
loop at itab_xcel.
hang on to xcel line num
l_tabix = sy-tabix.
each line in the xcel file marks begining of new prod.version defn
if num-of-trnas-in-session = 0, create new BDC session
if v_trans_in_ssn is initial.
perform bdc_session_open.
endif.
begin new bdc script for rtg create trans
fill in bdc-data for prod.version maintenance screens
perform bdc_build_script.
insert the bdc script as a BDC transaction
perform bdc_submit_transaction.
keep track of how many BDC transactions were inserted in the BDC
session
add 1 to v_trans_in_ssn.
if the user-specified num of trans in BDC session is reached OR
if end of input file is reached, close the BDC session
if v_trans_in_ssn = p_trnssn or
l_tabix = v_lines_in_xcel.
perform bdc_session_close.
clear v_trans_in_ssn.
endif.
endloop.
top-of-page.
call function 'Z_HEADER'
EXPORTING
FLEX_TEXT1 =
FLEX_TEXT2 =
FLEX_TEXT3 =
FORM TRANSFER_XCEL_TO_ITAB *
Transfer Xcel Spreadsheet to SAP Internal Table *
form transfer_xcel_to_itab.
Read the tab-delimited file into itab
call function 'WS_UPLOAD'
exporting
filename = p_name
filetype = 'DAT'
IMPORTING
filelength = flength
tables
data_tab = itab_xcel
exceptions
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_table_width = 4
invalid_type = 5
no_batch = 6
unknown_error = 7
others = 8.
if sy-subrc = 0.
sort the data
sort itab_xcel by matnr werks.
clear v_lines_in_xcel.
if no data in the file - error out
describe table itab_xcel lines v_lines_in_xcel.
if v_lines_in_xcel is initial.
write: / 'No data in input file'.
stop.
endif.
else.
if file upload failed - error out
write: / 'Error reading input file'.
stop.
endif.
endform.
FORM BDC_SESSION_OPEN *
Open BDC Session *
form bdc_session_open.
create bdc session name = prefix-from-selectn-screen + nnnn
add 1 to v_ssnnr.
concatenate p_bdcpfx v_ssnnr into v_ssnname.
open new bdc session
call function 'BDC_OPEN_GROUP'
exporting
client = sy-mandt
group = v_ssnname
keep = p_keep
user = p_uname
exceptions
client_invalid = 1
destination_invalid = 2
group_invalid = 3
group_is_locked = 4
holddate_invalid = 5
internal_error = 6
queue_error = 7
running = 8
system_lock_error = 9
user_invalid = 10
others = 11.
endform.
FORM BDC_BUILD_SCRIPT *
Build BDC *
form bdc_build_script.
data: l_arbpl like crhd-arbpl,
l_text1 like mkal-text1,
l_mdv01 like mkal-mdv01,
l_mapl like mapl.
clear bdc-data itab - begin of new bdc transaction
clear itab_bdc_tab.
refresh itab_bdc_tab.
read material cross reference tables to determine sap part#
clear : v_matnr, v_plnnr, v_plnal.
perform read_matnr_cross_ref using itab_xcel-matnr
itab_xcel-werks
changing v_matnr.
determine the version description to use
if itab_xcel-text1 is initial.
l_text1 = itab_xcel-verid.
else.
l_text1 = itab_xcel-text1.
endif.
determine the routing group# and group ctr# to use
perform read_routing .
determine the production line to use
if itab_xcel-mdv01 is initial.
if not provided in the file then:
prod line = work ctr on the last PP04 op of the rtg determined above
perform read_wc_on_last_pp04 using v_plnnr v_plnal
changing l_mdv01.
NOTE: when executing the above form\routine, if v_plnnr is initial
or v_plnal is initial, THEN l_mdv01 will automatically be
returned blank (ie initial)
else.
l_mdv01 = itab_xcel-mdv01.
endif.
build bdc script
perform bdc_build_script_record
fill in initial screen
using: 'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=ENTE',
' ' 'MKAL-WERKS' itab_xcel-werks,
' ' 'MKAL-MATNR' v_matnr,
' ' 'MKAL_ADMIN-DISPO' space,
' ' 'MKAL-PLNNR' space,
' ' 'MKAL_ADMIN-STTAG' space,
' ' 'MKAL-PLNNG' space,
' ' 'MKAL-MDV01' space,
' ' 'MKAL-PLNNM' space,
click create button on initial screen and go to detail screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=CREA',
fill in the detail screen and go back to initial screen
'X' 'SAPLCMFV' '2000',
' ' 'BDC_OKCODE' '=CLOS',
' ' 'MKAL_EXPAND-MATNR' v_matnr,
' ' 'MKAL_EXPAND-VERID' itab_xcel-verid,
' ' 'MKAL_EXPAND-TEXT1' l_text1,
' ' 'MKAL_EXPAND-BSTMI' itab_xcel-bstmi,
' ' 'MKAL_EXPAND-BSTMA' itab_xcel-bstma,
' ' 'MKAL_EXPAND-ADATU' itab_xcel-adatu,
' ' 'MKAL_EXPAND-BDATU' itab_xcel-bdatu,
' ' 'MKAL_EXPAND-PLTYG' v_plnty,
' ' 'MKAL_EXPAND-PLNNG' v_plnnr,
' ' 'MKAL_EXPAND-ALNAG' v_plnal,
' ' 'MKAL_EXPAND-STLAL' itab_xcel-stlal,
' ' 'MKAL_EXPAND-STLAN' itab_xcel-stlan,
' ' 'MKAL_EXPAND-SERKZ' itab_xcel-serkz,
' ' 'MKAL_EXPAND-MDV01' l_mdv01,
' ' 'MKAL_EXPAND-ELPRO' itab_xcel-elpro,
' ' 'MKAL_EXPAND-ALORT' itab_xcel-alort,
save the production version from initial screen
'X' 'SAPLCMFV' '1000',
' ' 'BDC_OKCODE' '=SAVE'.
endform.
FORM BDC_SUBMIT_TRANSACTION *
Submit BDC Session *
form bdc_submit_transaction.
Load BDC script as a trqansction in BDC session
call function 'BDC_INSERT'
exporting
tcode = v_tcode
tables
dynprotab = itab_bdc_tab
exceptions
internal_error = 01
not_open = 02
queue_error = 03
tcode_invalid = 04.
endform.
FORM BDC_BUILD_SCRIPT_RECORD *
form bdc_build_script_record using dynbegin name value.
clear itab_bdc_tab.
if dynbegin = 'X'.
move: name to itab_bdc_tab-program,
value to itab_bdc_tab-dynpro,
'X' to itab_bdc_tab-dynbegin.
else.
move: name to itab_bdc_tab-fnam,
value to itab_bdc_tab-fval.
shift itab_bdc_tab-fval left deleting leading space.
endif.
append itab_bdc_tab.
endform.
FORM BDC_SESSION_CLOSE *
Close BDC Session *
form bdc_session_close.
close the session
call function 'BDC_CLOSE_GROUP'
exceptions
not_open = 1
queue_error = 2
others = 3.
skip 2.
if sy-subrc ne 0.
write: / 'Error Closing BDC Session ' , 'RETURN CODE: ', sy-subrc.
else.
write : / 'Session created:', v_ssnname,
50 '# of transactions:', v_trans_in_ssn.
endif.
endform.
*& Form read_routing_cache
*FORM read_routing_cache USING pi_matnr
pi_werks
pi_alnag
pi_verid
pi_mdv01.
DATA: BEGIN OF lt_plpo OCCURS 0,
vornr LIKE plpo-vornr,
objty LIKE crhd-objty,
objid LIKE crhd-objid,
arbpl LIKE crhd-arbpl,
END OF lt_plpo,
l_mapl_plnnr LIKE mapl-plnnr.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
SELECT plnnr INTO l_mapl_plnnr
FROM mapl UP TO 1 ROWS
WHERE matnr = pi_matnr AND
werks = pi_werks AND
plnty = 'R' AND
plnal = pi_alnag AND
loekz = space.
ENDSELECT.
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
*ENDFORM. " read_last_pp04_operation_cache
*& Form read_routing
form read_routing.
data: begin of lt_mapl occurs 0,
plnnr like mapl-plnnr,
plnal like mapl-plnal,
end of lt_mapl,
l_arbpl like crhd-arbpl.
get all the rtg# and grp ctr# from MAPL
select plnnr plnal
into corresponding fields of table lt_mapl
from mapl
where matnr = v_matnr and
werks = itab_xcel-werks and
plnty = v_plnty and "Rate Routing
loekz = space. "with del flag = OFF
sort lt_mapl by plnal.
if not itab_xcel-verid is initial.
if the verid=0001 then use the 1st good rtg-grp# and grp-ctr#
if itab_xcel-verid = '0001'.
read table lt_mapl index 1.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
else.
if the verid<>0001 then use the rtg-grp# and grp-ctr# of the routing
whose work center on the last PP04 operation matches the given verid
loop at lt_mapl.
clear l_arbpl.
get the work center from the last PP04 operation
perform read_wc_on_last_pp04 using lt_mapl-plnnr
lt_mapl-plnal
changing l_arbpl.
if itab_xcel-verid = l_arbpl.
v_plnnr = lt_mapl-plnnr.
v_plnal = lt_mapl-plnal.
exit.
endif.
endloop.
endif.
else.
do nothing
endif.
For version IDs that are other then '0000' or 'ZWIP' :--
if itab_xcel-verid NE '0000' and
itab_xcel-verid NE 'ZWIP'.
if routing group# or group counter was not determined, make the
valid-to date 99/99/9999 so that the BDC, on execution, errors out.
if v_plnnr is initial or
v_plnal is initial.
itab_xcel-bdatu = '99/99/9999'.
endif.
endif.
determine the routing group#
CLEAR lt_pp04_cache.
chk if its in the cache first, if not then get it from MAPL table
and put it in the cache
READ TABLE lt_pp04_cache WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
IF sy-subrc = 0.
do nothing - lt_pp04_cache header line has rtg#
ELSE.
get the routing group # from MAPL
put it in the cache internal table
IF NOT l_mapl_plnnr IS INITIAL.
lt_pp04_cache-matnr = pi_matnr.
lt_pp04_cache-werks = pi_werks.
lt_pp04_cache-alnag = pi_alnag.
lt_pp04_cache-plnnr = l_mapl_plnnr.
APPEND lt_pp04_cache.
ENDIF.
ENDIF.
if the rtg# was determined AND
-- the work center was not determined yet AND
-- work center was really needed for this line in the input file
then
-- read the work center from last PP04 operation on the routing
-- update the cache accordingly
IF NOT lt_pp04_cache-plnnr IS INITIAL AND
lt_pp04_cache-arbpl IS INITIAL AND
( pi_verid IS INITIAL OR
pi_mdv01 IS INITIAL ).
read the last PP04 operation
CLEAR lt_plpo.
REFRESH lt_plpo.
SELECT vornr eobjty eobjid e~arbpl
INTO CORRESPONDING FIELDS OF TABLE lt_plpo
FROM plas AS b
INNER JOIN plpo AS c
ON bplnty = cplnty AND
bplnnr = cplnnr AND
bzaehl = czaehl
INNER JOIN crhd AS e
ON carbid = eobjid
WHERE b~plnty = v_plnty AND
b~plnnr = lt_pp04_cache-plnnr AND
b~plnal = lt_pp04_cache-alnag AND
c~loekz = space AND
c~steus = v_plpo_steus AND
e~objty = v_objty AND
e~werks = lt_pp04_cache-werks AND
e~verwe = v_verwe.
SORT lt_plpo BY vornr DESCENDING.
READ TABLE lt_plpo INDEX 1.
IF NOT lt_plpo-arbpl IS INITIAL.
lt_pp04_cache-arbpl = lt_plpo-arbpl.
read work center description
SELECT SINGLE ktext INTO lt_pp04_cache-ktext
FROM crtx WHERE objty = lt_plpo-objty AND
objid = lt_plpo-objid AND
spras = sy-langu.
the following read will get the index of the correct record to be
updated in the cache
READ TABLE lt_pp04_cache
WITH KEY matnr = pi_matnr
werks = pi_werks
alnag = pi_alnag.
MODIFY lt_pp04_cache
INDEX sy-tabix
TRANSPORTING arbpl ktext.
ENDIF.
ENDIF.
endform. " read_last_pp04_operation_cache
*& Form read_wc_on_last_pp04
form read_wc_on_last_pp04 using pi_plnnr
pi_plnal
changing pe_arbpl.
data: begin of lt_plpo occurs 0,
vornr like plpo-vornr,
objty like crhd-objty,
objid like crhd-objid,
arbpl like crhd-arbpl,
end of lt_plpo.
get all the PP04 operations for the given rtg# & grp-ctr#
select vornr eobjty eobjid e~arbpl
into corresponding fields of table lt_plpo
from plas as b
inner join plpo as c
on bplnty = cplnty and
bplnnr = cplnnr and
bzaehl = czaehl
inner join crhd as e
on carbid = eobjid
where b~plnty = v_plnty and "Rate Routing
b~plnnr = pi_plnnr and
b~plnal = pi_plnal and
c~loekz = space and "Oper Del Flag = OFF
c~steus = v_plpo_steus and "PP04
e~objty = v_objty. "WC Obj Type = 'A'
read the last operation
sort lt_plpo by vornr descending.
read table lt_plpo index 1.
pe_arbpl = lt_plpo-arbpl.
endform.
Regards.

Error in my BDC SESSION METHOD

Hi,
I was trying work on BDC SESSION METHOD AND MY TCODE IS XK01.
Here is my code can some one tell me where i am doing wrong becoz its not giving the output as I expected. And I am uploading a tab delimeter file.
report ZAN_BDCVENDOR
       no standard page heading line-size 255.
include bdcrecx1.
DATA: I_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF RECORD OCCURS 0,
LIFNR(016),
BURKS(004),
EKORG(004),
KTOKK(004),
AKONT(010),
FDGRV(010),
WAERS(005),
END OF RECORD.
start-of-selection.
perform open_group.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                      = 'C:\VENDOR.TXT'
FILETYPE                      = 'ASC'
tables
    data_tab                      = RECORD
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT RECORD.
perform bdc_dynpro      using 'SAPMF02K' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'USE_ZAV'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RF02K-LIFNR'
                              '8765'.
perform bdc_field       using 'RF02K-BUKRS'
                              '1000'.
perform bdc_field       using 'RF02K-EKORG'
                              '1000'.
perform bdc_field       using 'RF02K-KTOKK'
                              '0001'.
perform bdc_field       using 'USE_ZAV'
                              'X'.
perform bdc_dynpro      using 'SAPMF02K' '0210'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-FDGRV'.
perform bdc_field       using 'BDC_OKCODE'
                              '=UPDA'.
perform bdc_field       using 'LFB1-AKONT'
                              '160000'.
perform bdc_field       using 'LFB1-FDGRV'
                              'A1'.
perform bdc_dynpro      using 'SAPMF02K' '0310'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFM1-WAERS'.
perform bdc_field       using 'BDC_OKCODE'
                              '=UPDA'.
perform bdc_field       using 'LFM1-WAERS'
                              'usd'.
perform bdc_transaction using 'XK01'.
ENDLOOP.
perform close_group.
              CALL FUNCTION 'BDC_OPEN_GROUP'
               EXPORTING
                CLIENT                    = SY-MANDT
                DEST                      = FILLER8
                 GROUP                     = 'SESSION1'
                HOLDDATE                  = FILLER8
                KEEP                      = FILLER1
                 USER                      = SY-UNAME
                RECORD                    = FILLER1
                PROG                      = SY-CPROG
              IMPORTING
                QID                       =
              EXCEPTIONS
                CLIENT_INVALID            = 1
                DESTINATION_INVALID       = 2
                GROUP_INVALID             = 3
                GROUP_IS_LOCKED           = 4
                HOLDDATE_INVALID          = 5
                INTERNAL_ERROR            = 6
                QUEUE_ERROR               = 7
                RUNNING                   = 8
                SYSTEM_LOCK_ERROR         = 9
                USER_INVALID              = 10
                OTHERS                    = 11
              IF sy-subrc <> 0.
              WRITE 'ERROR IN OPEN_GROUP'.
              ENDIF.
               CALL FUNCTION 'BDC_INSERT'
               EXPORTING
                 TCODE                  = TCODE
                 POST_LOCAL             = NOVBLOCAL
                 PRINTING               = NOPRINT
                 SIMUBATCH              = ' '
                 CTUPARAMS              = ' '
                 TABLES
                   dynprotab              = I_BDCDATA
               EXCEPTIONS
                 INTERNAL_ERROR         = 1
                 NOT_OPEN               = 2
                 QUEUE_ERROR            = 3
                 TCODE_INVALID          = 4
                 PRINTING_INVALID       = 5
                 POSTING_INVALID        = 6
                 OTHERS                 = 7
               IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
               ENDIF.
               CALL FUNCTION 'BDC_CLOSE_GROUP'
               EXCEPTIONS
                 NOT_OPEN          = 1
                 QUEUE_ERROR       = 2
                 OTHERS            = 3
               IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
               ENDIF.
I appreciate

Hi,
i guess, the error is due to, u didnt pass the TCODE parameter in BDC_INSERT FM.
Try by passing it...
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = TCODE*
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
dynprotab = I_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
Hope it works!!
Regards,
Pavan

Creating Sales order texts while using BDC session method is not working

Hi All,
I have an existing program which creates sales order using BDC session method.( Actual program uses BAPI to create sales order and in case if any error occurs during creation of sales order BDC session is generated so that user can process it later and i am facing issues in this part of code where it uses BDC)
I wanted to modify this BDC sesion to update the sales order text also. I tried recording VA01 for creationg sales order text unfortunatly it is not capturing the data i am entering in the text fields.
Please suggest if there is any way to create sales order using BDC.
Regards
Sheeba

Hi Madhu,
'=TP_CREATE' is the OK code i am getting for creating TEXTS. But the text entered are not captured in BDC.
Part of BDC program generated for cretaing sales order texts.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=%_GC 128 22'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_CREATE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=%_GC 128 22'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '=TP_CREATE'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4003'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBACK'.
perform bdc_field       using 'LV70T-SPRAS'
                              'EN'.
perform bdc_dynpro      using 'SAPMV45A' '4001'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
Regards,
Sheeba

How to handle the errors in BDC Session method

Hi All,
I am uploading Material Master (MM01) records using BDC Session Method.my problem is when i am running the program, all the error records are going to flat file.how can i correcting the error records and after correction how can i re-process the error records.tell me with example.
i have around 70,000 records in my flat file.

Hi,
I am attaching few threads.Hope these will help you.
If there are any error records in session, all those error records will get poulated in log .SM35 and after the session is completed , u can see error records which can be corrected and reprocessed again
We have the structures BDCLD and BDCLM, which will capture the log details inthe session. Firstly, sesssion should be processed. After that log will be created. Then caputure the information into an internal table using BDCLM and BDCLD.
and refer the link.
error correction in bdc session
regards
Madhu

How to handle screen resolution in bdc session method.

hi all,
how to handle screen resolution in bdc session method.

Hello,
Why do need that for? Is it to add rows on a table control??
If it does, add new rows by using the add button instead of adding into the table control directly to each row.
Bye
Gabriel.

Question in BDC session method.

Hi guys,
I am trying to upload BOM using BDC session method.
While doing this, i have learnt the steps by heart. But i do not understrand the logic behind the steps. For example, why do we include this statement
Data: IT-BDC like BDCDATA occurs 0 with headerline.
What if we don't include this statement?
Moderator message: sorry, these forums are not targeted to provide step by step guides to beginners, please search for available information, take courses, etc.
locked by: Thomas Zloch on Sep 10, 2010 1:06 PM

Hello Dhirendra,
Thanks for immediate reply. I want to understand BDC method conceptually. What exactly happens by performing each step.
I am putting up the BDC i made. I copied some of the code from here and there. It works fine but i don't understand the purpose of BDCDATA,
call transaction 'cs01'
and form bdc_dynpro and form bdc_field.
I am quite new to ABAP. Please don't mind if i ask dumb questions.
I am unable to understand how control flows through the code logic.
report ZBDCFORCS01
       no standard page heading line-size 255.
*include bdcrecx1.
DATA: IT_BDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
      IT_MSGCOLL LIKE BDCMSGCOLL OCCURS 0.
TYPES TRUXS_T_TEXT_DATA(4096) TYPE C OCCURS 0.
DATA: I_TAB_RAW_DATA TYPE TRUXS_T_TEXT_DATA.
DATA: BEGIN OF ITAB OCCURS 0,
      MATNR(18),
      WERKS(4),
      STLAN(1),
      IDNRK(18),
      MENGE(20),
      END OF ITAB.
SELECTION-SCREEN: BEGIN OF BLOCK b1.
PARAMETERS: CS01FILE TYPE RLGRAP-FILENAME.
SELECTION-SCREEN: END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR CS01FILE.
CALL FUNCTION 'F4_FILENAME'
   EXPORTING
     PROGRAM_NAME        = SYST-CPROG
     DYNPRO_NUMBER       = SYST-DYNNR
     FIELD_NAME          = ' '
   IMPORTING
     FILE_NAME           = CS01FILE
start-of-selection.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR          =
I_LINE_HEADER              =
    I_TAB_RAW_DATA             = I_TAB_RAW_DATA
    I_FILENAME                 = CS01FILE
TABLES
    I_TAB_CONVERTED_DATA       = ITAB[]
EXCEPTIONS
   CONVERSION_FAILED          = 1
   OTHERS                     = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
LOOP AT ITAB.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR'
                             '1400-500'.
itab-matnr.
perform bdc_field       using 'RC29N-WERKS'
                             '1000'.
itab-werks.
perform bdc_field       using 'RC29N-STLAN'
                             '1'.
itab-stlan.
perform bdc_field       using 'RC29N-DATUV'
                              '10.09.2010'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-MENGE(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29P-IDNRK(01)'
                             '1300-320'.
ITAB-IDNRK.
perform bdc_field       using 'RC29P-IDNRK(02)'
                             '1300-312'.
ITAB-IDNRK.
perform bdc_field       using 'RC29P-MENGE(01)'
                             '2'.
ITAB-MENGE.
perform bdc_field       using 'RC29P-MENGE(02)'
                             '2'.
ITAB-MENGE.
perform bdc_dynpro      using 'SAPLCSDI' '0130'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR'.
perform bdc_field       using 'RC29P-POSNR'
                              '0010'.
perform bdc_field       using 'RC29P-IDNRK'
                              '1300-320'.
perform bdc_field       using 'RC29P-MENGE'
                              '2'.
perform bdc_field       using 'RC29P-MEINS'
                              'PC'.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                              'X'.
perform bdc_dynpro      using 'SAPLCSDI' '0130'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR'.
perform bdc_field       using 'RC29P-POSNR'
                              '0020'.
perform bdc_field       using 'RC29P-IDNRK'
                              '1300-312'.
perform bdc_field       using 'RC29P-MENGE'
                              '2'.
perform bdc_field       using 'RC29P-MEINS'
                              'PC'.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                              'X'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IT_BDC
            MODE 'A'
            UPDATE 'S'
            MESSAGES INTO IT_MSGCOLL.
REFRESH IT_BDC.
ENDLOOP.
FORM BDC_DYNPRO USING PROGRAM_DYNPRO.
CLEAR IT_BDC.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDC.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR BDCDATA.
BDCDATA-FNAM = FNAM.
BDCDATA-FVAL = FVAL.
APPEND BDCDATA.
ENDFORM.
Edited by: Yayati6260 on Sep 10, 2010 12:29 PM

How to overcome view changes in bdc session method using recording ?

how to overcome view changes in bdc session method using recording ?
ex-for mm01 in recording if i selected views basic data1 and basic data2.
i seheduleded for background for after 3 days .
if any body changes views by selecting other views also.
how to overcome this with out programming ?
is there any settings ?

Hi,
I am attaching few threads.Hope these will help you.
If there are any error records in session, all those error records will get poulated in log .SM35 and after the session is completed , u can see error records which can be corrected and reprocessed again
We have the structures BDCLD and BDCLM, which will capture the log details inthe session. Firstly, sesssion should be processed. After that log will be created. Then caputure the information into an internal table using BDCLM and BDCLD.
and refer the link.
error correction in bdc session
regards
Madhu

Converting '.xls' file to '.txt' in BDC Session method

Hi gurus,
Happy DIWALIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII------',','
Please help me in converting '.xls' file to '.txt' in BDC Session method. Is there is any method or function module for this conversion. Please help me with coding.
Thanks and regards,

Hi
File->save as -> Save as type ( text tab delimted.txt) ->Click on yes .
Now open .txt file -> here data will be tab delimted.
genrally i use tab delimted file to upload the data.
Even if you want to programtically then get the data from xls file to Internal table,now use concatenate with comma ,now download it.
Check the below program :
Upload xls file and you can see .txt file ( with comma delimted)
Input ( XLS file )
aaa 1245 2344 233 qwww
233 2222 qwww www www
Output ( .txt file with comma delimted)
aaa,1245,2344,233,qwww
233,2222,qwww,www,www
REPORT ZFII_MISSING_FILE_UPLOAD no standard page heading.
data : begin of i_text occurs 0,
text(1024) type c,
end of i_text.
Internal table for File data
data : begin of i_data occurs 0,
field1(10) type c,
field2(10) type c,
field3(10) type c,
field4(10) type c,
field5(10) type c,
end of i_data.
data : begin of i_download occurs 0,
text(1024) type c,
end of i_download.
data : v_lines type sy-index.
data : g_repid like sy-repid.
data v_file type string.
data: itab like alsmex_tabline occurs 0 with header line.
data : g_line like sy-index,
g_line1 like sy-index,
$v_start_col type i value '1',
$v_start_row type i value '1',
$v_end_col type i value '256',
$v_end_row type i value '65536',
gd_currentrow type i.
selection-screen : begin of block blk with frame title text.
parameters : p_file like rlgrap-filename obligatory.
selection-screen : end of block blk.
initialization.
g_repid = sy-repid.
at selection-screen on value-request for p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = g_repid
IMPORTING
FILE_NAME = p_file.
start-of-selection.
Uploading the data into Internal Table
perform upload_data.
download the file into comma delimted file.
perform download_data.
*& Form upload_data
text
--> p1 text
<-- p2 text
FORM upload_data.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = p_file
I_BEGIN_COL = $v_start_col
I_BEGIN_ROW = $v_start_row
I_END_COL = $v_end_col
I_END_ROW = $v_end_row
TABLES
INTERN = itab
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
write:/10 'File '.
ENDIF.
if sy-subrc eq 0.
read table itab index 1.
gd_currentrow = itab-row.
loop at itab.
if itab-row ne gd_currentrow.
append i_data.
clear i_data.
gd_currentrow = itab-row.
endif.
case itab-col.
when '0001'.
first Field
i_data-field1 = itab-value.
second field
when '0002'.
i_data-field2 = itab-value.
Third field
when '0003'.
i_data-field3 = itab-value.
fourth field
when '0004'.
i_data-field4 = itab-value.
fifth field
when '0005'.
i_data-field5 = itab-value.
endcase.
endloop.
endif.
append i_data.
ENDFORM. " upload_data
*& Form download_data
text
--> p1 text
<-- p2 text
FORM download_data.
loop at i_data.
concatenate i_data-field1 ',' i_data-field2 ',' i_data-field3 ','
i_data-field4 ',' i_data-field5 into i_download-text.
append i_download.
clear : i_download,
i_data.
endloop.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
FILENAME =
'C:\Documents and Settings\smaramreddy\Desktop\fff.txt'
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
IMPORTING
FILELENGTH =
TABLES
DATA_TAB = i_download
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " download_data
Regards
Pavan

Creation of Material using BDC Session method & global class

Hi
Creation of Material using BDC Session method & global class by using oops.
can anyone plz help me out

Hi,
it looks like it's not possible to call this BAPI wihtout material number. Here is a quote from BAPI documentation.
When creating material master data, you must transfer the material
number, the material type, and the industry sector to the method. You
must also enter a material description and its language.
Cheers

BDC Session method (sample code OR document)

Hi Friends,
I need BDC Session method sample program to practice. or realted document. plz help me out.
Regards & Thanks
Kali Pramod

Hi,
Goto transaction SHDB record a Transaction Completly and then save it and click create program this creates program using Call Transaction and Session Method, if you go through the program you can know the complete process.
Hope this could be of little help.
Thanks,
Prashanth

Can we hav call transaction and session method for an application

can we hav call transaction and session method for an application ?if yes how?

Hi ,
You can. If Call Transaction fails, a batch input session can be created.
Check this example-
Call the transaction. Messages from Call Transaction are stored in the
internal table messtab
CALL TRANSACTION 'LT01' USING bdc_tab MODE 'N' UPDATE 'S'
      MESSAGES INTO messtab.
IF sy-subrc = 0.
Call transaction successfull, get the number of the Transfer Order that
was created
    LOOP AT messtab.
      IF messtab-dynumb = '0104' AND messtab-msgnr = '016'.
        w_transportorderno = messtab-msgv1.
      ENDIF.
    ENDLOOP.
ELSE.
Call transaction failed, create a batch input session instead.
    PERFORM open_group.
    PERFORM bdc_insert USING 'LT01'.
    PERFORM close_group.
ENDIF.
Regards,
Sookshma

Problem in bdc session method for tcode FS00

Similar Messages

Maybe you are looking for