Problem in BEx Workbook Printing

Hi,
I need to print a BEx workbook. The column headers in the report is months, i.e April, May, June... till March. When I print the workbook the column header is getting truncated.
Please advise me what needs to be done to print the entire column text. Please suggest me if there are any settings.
Best Regards,
Krishna

Hi,
Enable the AutoFit property of the design items.
This Autofit option will be available in the Properties of Design Items dialog.
If the Autofit is enabled then the text displayed will be fit within the cell.Hence there wont be any truncation issues.
Before printing adjust the Print Area and check Print Preview
Rgds,
Murali

Similar Messages

  • Problems saving BEx Workbook to My Favorites

    Hi, I have a user that IS able to save some workbooks to her Favorites, but then we have others that when she tries to save to her Favorites she gets errors like run-time error '429'.
    Anyone have any ideas why this would happen with some workbooks and not others?
    Thanks,

    Problem was related to SMEN_BUFC table having incorrect entries... SAP has corrected the table.

  • Call Bex Workbook with parameters via ABAP

    Dear all,
    I have a problem with Excel workbook run from the functional module and transfer parameters to it.
    For this purposes I have used FM RSAH_LAUNCH_EXCEL. I use SAP BW 2004s version.
    In fact this FM opens the Excel workbook but these parameters (that were defined in the table I_T_VAR) are not available in Excel. The window with variables pops up anyway and fields in this window are empty.
    What I would like to do finally is to run this Excel workbook, send some parameters to avoid of appearing this window. It was possible to do in Sap BW 3.5 (according to my experience). Probably it is possible to do in some other way in 2004s? If you know please give me a clue.
    One more question: I try to use the function SAPBEXsetVariable() in BeX that I used to use in 3.5. In 2004s it is not available. Does somebody know what can be used instead of it in 2004s?
    Thanks in advance.

    How about putting values of variables into filter area of WB?

  • After implementing Note 992032 getting errors in Bex workbook

    Hi All,
    After Implementing the note 992032 (You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about using transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes) getting error messages in BEx workbook when try to filter on any InfoObject but when I run query I'm getting data but not able to filter, we are using BI 7 on patch 11. When implementing the note number 964580 it's giving error and this particular note number is not yet implemented.
    Getting error messages like:
    1. Error reading the data of InfoProvider 0FIAR_O03
    2. An error occurred in the program:
    3. ORA-20000: Insufficient privileges ORA-06512: at "SYS.DBMS_STATS", line 2150 ORA-06512: at "SYS.DBMS_STATS", line 14112 ORA-06512: at line 1
    4. System error in program CL_RSR_WWW_RENDERER and form GET_FILTER_VALUES_CHA:03 (see long text)
    Before implementing 992032 everything worked well.
    Could anyone please help!
    King Regards
    Suman

    We are getting similar errors after applying BW SP11 yesterday on our dev BW system.  I've opened a message with SAP support .  If anyone gets a solution for this please post it.
    Regards,
    Ron.

  • Problem in creating workbook

    Hi All,
    I have a problem in creating workbook.
    After inserting the query and saving as workbook, when the workbook is opened again there is no query inserted into it.
    Some values looks like alpha numeric values are populating.
    I'm using BEx 3.5 and Microsoft Excel 7
    Please help me to get ride of this problem
    Thanks and Regards,
    Geetha

    hi Geetha.
    creation of work book is important issue .
    1).create query make / assign columns and rows with chars and keyfig ok.
    2).check,save,execute.
    3).observe output.
    4).create work book.
    5).select save in query prompt save as new work book.
    6).u said my query is not existing ok select find select your info area   observe your work book.
    7).generally work book can assign to roles.
    ok geetha byeeeeeeeeeeeeeeeeeeeeeeeeeeeee...
    i think this information may helps u.

  • Information broadcasting  - precalculation error for BEx workbooks

    Hi,
    i have problem with Information broadcasting for BEx workbooks 7.0. At the log display of transaction RSRD_ADMIN i get a red status message with " Cannot precalculate workbook XYZ" -> connection transfer did not succeeded.
    At the transaction RSPRECADMIN -> show queue (program: RS_PREC_SHOW_QUEUE) , i see that the request is listed as "successful precalculations" (?!)
    Some hints:
    -Further tests (2 days ago) were successful for workbooks and query email-bursting
    -Precalculation server is switching between green and yellow status every refresh
    Do you have any ideas or hints?
    Thx in advance
    Tobias

    Hello,
    I would like to suggest you something:
    Go to Windows -> Services   (Start -> RUN -> Services.msc)
    Stop the SAP Precalc. Server
    Start the SAP Precal. Server Multi-instance.
    ON THE PRECALCULATION SERVER, access your system via SAPGUI and go to RSPRECADMIN.
    Then, there is the tip, register 10 times the Precalculation Server with different names.
    E.g.
    Precalc1
    Precalc2
    Precalc3
    Precalc4
    Precalc10
    Then, test again.
    Cheers,
    Edward

  • Change characters in the background after upgrading BEX workbook

    Hi,
    I have just upgrade the Bex workbook from 3.5X to 7.0.  Functionally, it works fine.  However, one thing that irritates the end users is that when one opens the workbook, it immediately shows an Excel-sheet with change symbols, numbers and characters scattering from line 1 to 4 (like TRUE, FALSE, arrow-symbols etc).  Later on a variable screen pops up on top of this background.  The background will disappear only after the variable screen is filled and the result is finally displayed. 
    Does anyone comes across this issue?  Is there any way to get a clean background to start with?
    Thanks.
    Best regards,
    Zabrina

    Hi,
    The problem is due to the fact that we are using too low level of SAPGUI.  After upgrading the GUI level and patches, this together with other frontend problems such as missing role button, variants not showing and so on are dissolved.
    Best regards,
    Zabrina

  • My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

    I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
    My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
    Could there may be a setting somewhere that I need to adjust please?  I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
    <Edited by Host>

    Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

  • Problem in BEx analyzer output in BI dev and BI Quality

    Hi All
    I am facing a problem in BEx analyzer output in BI Dev and BI Quality server where the query is make on BI infoset.
    When i am executing the query in BI dev server then it is giving the output result but when i tried to executing the BI query in BI quality server the i got 'No available data found result'.
    I have also checked the same selection input result in infoprovider for infoset and output is getting for the same.
    Please suggest for regarding solution.
    thanks & regards,
    Gourav Sekhri

    Hi,
    check whether you have loaded data in to quality server if no, please load data for all the target involved in info set.  If data loaded check all the target 'request for reporting available 'or not.
    Also check whether data is showing in infoset or not.. if data availble there change your selection critiria accordingly.
    Thanks
    BVR
    Edited by: binu v. rajan on Aug 20, 2011 4:23 PM

  • BEx workbook Default variant not working with Broadcaster

    Hi,
    We are broadcasting a BEx workbook, which has more than 1 queries. We have a default variant to populate all the input variables. But while broadcasting, this default variant is not populated sometimes, So the query returns wrong results. It happens randomly. I have checked broadcast logs also nothing unusual found. Can someone throw some light.
    Thanks

    Hi,
    We are broadcasting a BEx workbook, which has more than 1 queries. We have a default variant to populate all the input variables. But while broadcasting, this default variant is not populated sometimes, So the query returns wrong results. It happens randomly. I have checked broadcast logs also nothing unusual found. Can someone throw some light.
    Thanks

  • Problems with your HP printer after upgrading to Windows 8.1

    If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
    www.hp.com/go/tools.
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

    Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions  work just fine.
          I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

  • There is a problem communicating with the printer.

    I have a Lexmark Interpret S405. I am using a MBP laptop with WiFi, running 10.5.8. I have a cabled (non-wifi) Linsys router. I am using an Airport Express.
    I was finally able to get the WiFi light on the Lexmark to be static green after reinstalling the Lexmark WiFi setup and reconfiguring my Airport settings so that both the computer and printer see each other.
    In fact, I even updated the driver from Lexmark's Web site last night and I watched the WiFi light on the printer blink green indicating that the installation of the driver update was being communicated to the printer.
    However, when I print, it opens the print window and says first "Looking for S300-S400", then it says "Printer is now online". Then after about 10 seconds, I get this error: "There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or hold the job and try again."
    I've exhausted Lexmark's technical databases and couldn't find the answer here.
    I've read that one possible solution was to delete all the printers from the "Print & Fax" system preferences window and re-add. That didn't work.
    Lexmark says for: The printer communicating on a network; however, the printer is not responsive. Possible causes could be:
    1. Your printer is associated with a network, router, or access point, but it is not your network.
    2. A software process is blocked by a system security firewall preventing network communication.
    3. You are logged into Virtual Private Network (VPN).
    4. You are connected to a network but have decided to switch to a USB connection.
    I don't have a VPN and have removed the USB cable, then restarted both printer and computer, and deleted printers in Sys Prefs, restarted, and still no solution.
    I can print directly via USB cable, but want to print wirelessly.
    Lexmark also says to enter my PIN (which I have pulled out from the print menu screen on the printer) in the System. That tells me a lot...
    Network settings on the print window on the printer also tell me Signal strength is 5 (excellent) and that I am on the network my airport is on.
    Message was edited by: Macman17

    I bet this is too late but...
    Are you trying to print through the airport express wirelessly or the built in wireless of the lexmark? If you want to use the airport express, there is no need to mess with the wireless printing on the lexmark at all. The airport express will be easy to set up, all the wireless setups through the printers are a pain.

  • BEx workbook does not open from portal when excel is already opened

    Hi all,
    When I go to the portal and open a BEx workbook from there while excel is already open, then the workbook does not open.
    When I close excel and then open the BEx workbook it all works fine.
    I do not get any error: just nothing happens.
    Any idea how to solve this?
    Versions:
    BI 3.5
    Excel 2003
    ADDITIONAL INFO
    I found this only happens when excel is open with a cell in edit mode. Whenc I then open BEx from the portal I get the error 'please install suitable version'.
    Let my know if you have any advice.
    Message was edited by:
            Arjen de Ruiter
    null

    No solution for this.

  • WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up

    My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft.  Now I cannot print at all.  I get an error that says,  "windows cannot print due to a problem with the current printer set up".  I have tried reinstalling and a ton of other solutions to no avail.  Can someone PLEASE Help!

    Hello there, @jesseangelique ,
    Welcome to the Community!
    I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
    Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
    This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
    Also, let me know which Officejet 8500 Model you have:
     HP Officejet Pro 8500 All-in-One Printer - A909a
     HP Officejet Pro 8500 All-in-One Printer - A909b
     HP Officejet Pro 8500 Premier All-in-One Printer - A909n
     HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
    Hope to hear from you!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Problem with the workbook after upgrade

    Hi all,
    We are facing some problems with the workbooks after BW 3.5 Upgrade.e.g. some templates are disturbed, some variables have been affected. So I have few doubts --
    1. What could be the possible reason behind this?
    2. What exactly got changed in the system which reflected this problems?
    3. What other problems might have occurred which we may not have noticed?
    4. How can I find out the number of workbooks affected due to this?

    Dear ,
    This is known issue:
    Please implement the below mentioned note as this will solve your issue,
    Note 1609237 :  Subsequent correction to 1567679
    Regards,
    Arvind

Maybe you are looking for