Problem in BEx.
It is not possible to use the colour pale blue in any workbook with a BEX query in it! As this is the corporate colour for all our reporting its getting messy moving all presentational tables into new workbooks.
thanks.
Hi Ravi and Gupta
" data is stored in the cube with dcimals
like 6.5,7.5,.....etc...when ever data is in decimals in cube its rounding off to next integer for example 6.5 becomes 7 ,and 7.5 becomes 8."
data type for key figs is "Quantity" and unit of measure is "0UNIT".
in keyfig maintaince bex decimals set to 0.000.
plz. advice
xys redd.
Similar Messages
-
Problem in BEx analyzer output in BI dev and BI Quality
Hi All
I am facing a problem in BEx analyzer output in BI Dev and BI Quality server where the query is make on BI infoset.
When i am executing the query in BI dev server then it is giving the output result but when i tried to executing the BI query in BI quality server the i got 'No available data found result'.
I have also checked the same selection input result in infoprovider for infoset and output is getting for the same.
Please suggest for regarding solution.
thanks & regards,
Gourav SekhriHi,
check whether you have loaded data in to quality server if no, please load data for all the target involved in info set. If data loaded check all the target 'request for reporting available 'or not.
Also check whether data is showing in infoset or not.. if data availble there change your selection critiria accordingly.
Thanks
BVR
Edited by: binu v. rajan on Aug 20, 2011 4:23 PM -
can't open iTunes on my pc in windows. I keep getting a Problem event: BEX error. How can i fix this? need very detailed step by step instructions on how to fix. thx
Check out this discussion link:
https://discussions.apple.com/thread/2777410?threadID=2777410&tstart=15 -
Since updating iTunes, I can open iTunes, view my apps, music, movies, etc. But when I click on iTunes store I get an error message that iTunes has stopped working. The fault module name: StackHash_e8ad Problem Event: BEX. Already tried reinstall several times and tried all the tips and advanced tips on the iTunes troubleshooting page. HELP!!!
Try gn_id's suggestion from the following post:
Re: iTunes 11 crashes when opening the store - no error message -
Hi Gurus,
*Sales Query 1 *
*CUSTOMER ID *
*MATERIAL ID *
*Key Figures *
*SALES REP ID *
*No Applicable Data Found. *
Could you guys please help me to solve the above problem in BEX when excute query.
No data is showing in BEX though infocube shows the data.
Cheers
ShrinuCheck if data in infocube is available for reporting, Goto context menu of cube -
> manage -
> requests tab --> check and see if the 'request for reporting' column has the query icon.
Also, do you have aggregates defined on u r cube. If uo do, you will have to roll up aggregates.
right click cube -> manage --> Rollup tab -> Press Execute button
after its complete goto requests tab and refresh, the u will be able to see the icon for 'request for reporting' available.
run your query again and you shd be able to see data.
If the above dont work search the forums for more info, this problem has been discussed several times.
Thanks
K
Edited by: Krishna K on Jan 20, 2008 2:48 AM -
Hi All,
I have some problems with bex exception. In my query, I have 3 columns (the third one is a rate calculated from the first (C1) and second columns (C2)). I have a characteristic in row which lists the different values. Sometimes, I have no value for C1 and C2 and also, the value rate is space (thatu2019s normal behaviour). I must highlight some rate by
If rate < 55 bad
If rate => 55 good
I did an exception
Bad except1 BT 0 to 54
good except2 GE 55
That works fine but my problem is :
The rate cells with a space value are also highlighted with the bad colour. Have you some idea to avoid this behaviour ?
C1 C2 Rate
1000 5 200 (C3)
100 20 5 (C3)
space space space (C3)
1st C3 is green
2nd C3 is red
3rd C3 is also red (I want to leave blank)
Thanks fot your help.Hi,
If you are in BW 3.5 then you can make us of class interfaces for this scenario and it was explained here in this article.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0b4cfcc-f9c1-2b10-1bb5-d4b61083d471
Hope this helps you.
Regards,
Rajkandula -
Problems using Bex 3.x on Citrix Terminal Server Nw2004s
Hello,
we've got some problems using Bex 3.x on Ctirix Terminal Server.
1.) There are 3 Windows displayed (1)sapbex.xla
remote (2) Mappe 1
remote (3) Mappe
Why these Remote-Windonws are diplayed ? Do I have to set a path ?
2.) There occurs after a time when the Query should be changed ? No entry in SM21 ? An unexpected 'unable to show modal form within this context' error occured in wdbrlog"
Is there any connection time out-setting for the Bex ?
Thanks
FrankHi,
the problem resulted while implementing Citrix Hotfix XE104W2K3R02 and was fixed with XE104R02W2K3001.
Citrix Info:
Hotfix Rollup Pack XE104W2K3R02 - For Citrix MetaFrame XP 1.0 for Windows Server 2003
Known Issue(s) in this Release
After applying this hotfix rollup pack, seamless connections to Microsoft Office applications may display multiple icons on the client taskbar. To resolve this issue, apply Hotfix XE104R02W2K3001.
Hotfix XE104R02W2K3001 - For MetaFrame XP 1.0 for Windows Server 2003
Issue(s) Resolved in this Hotfix
1. After applying Hotfix Rollup Pack 2, seamless connections to Microsoft Office applications may display multiple icons on the client taskbar.
Kind regards
Frank -
IP - Various problems with BEX Analyser - help would be nice
Hi,
we use IP in combination with BEX analyser. We experience certain problems. Does anyone experienced the same issues mentioned below:
1) if a planning function is executed, it is executed twice when your cursor is within the query itself. If it is outside the query when clicking on the button, it is executed once (like it should).
2) Locking: we don't have locking problems, but from the moment two people lock each other once, they need to close their analyser and re-open it (so logon again) in order to be able to start planning again in a non-locked part. If they just change their selection (to the not-lock part) they remain locked!!!
3) planning function with multiple variables: system cannot retrieve values of all variables.
details of function:
CMD 1 EXECUTE_PLANNING_FUNCTION
PLANNING FUNCTION NAME 1 AG10_COPY01
DATA PROVIDER_FILTER 1 DATA_PROVIDER_1
VAR_NAME 1 PROF_CTR
VAR_VALUE 1 510
VAR_NAME 2 PERIOD
VAR_VALUE 2 012
VAR_NAME 3 CUSTOMER
VAR_VALUE 3 1000
-> following the instruction of the SAP course, in case of multiplle variables they should start from 0 and have an incremental increase. But the system only recognizes the variable with index = 1
regards
DDear Dries,
could it be that the variable type you use require a different set of commands?
In general the parameters of the BEx Analyzer follow the rules of the SAp BW 3.5 Webruntime. When reading this detailed documentation you find that depending on the type of variable other names have to be used, e.g. when using a selection option variable you need something line varname_low, varname_high, ...
The documentation can be found in the online-help:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/07/ff413a3ace7022e10000000a11402f/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/07/ff413a3ace7022e10000000a11402f/content.htm</a>
Best regards, Olaf Fischer -
Variable extracting problem in BEX
Hi Experts,
I created a user entry variable with multiple single values.
After running the query, i tryed to choose parameters, but in new window I have get a time out.
In another words I can`t choose the parameters.
I opened the query without the value, and I can see the parameters in navigational block.
After this I checked the ODS and characteristic in RSRV. Iam not fined any problem, all test is finished green.
I tryed create new query with this variable on another data provider and this work!
Can anybody help me to solve this problem?
Thx!
Vadim.Hi,
take additional a look at this note:
FAQ: Input helps in Netweaver BI
SAP Note Number: [1080863|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler]
This note gives answers to frequently asked questions (FAQ) with regard to using the input help for characteristics in SAP NetWeaver BI. This includes the input helps in the BI BEx Java Web as well as the input helps in the BI BEx Tools.
Regards
Andreas -
Hi Team,
I am facing a strange problem.
Some attributes are marked has navigational attribute in the Multiprovider level.
When I am dragging the same Multiprovider in the Bex to create a query on that, those navigational attributes are missing in the Global definition of that multiprovider in the Query designer.
Have anyone faced such an issue?
Kindly help me...
Regards,
Debjani...HI Vikash,
We have checked both the Multiprovider and the cube and also the infoobject level.
But still I am facing this issue..
Regards,
Debjani... -
Keyfigure dsiplay problem in BEx Report
Hello Experts,
In my BEx report i need to display keyfigure values as a whole numbers instead of fraction.I have selected 0 in decimal place of keyfigure properties but the problem is if I have a decimal it gets truncated instead of round figure. Eg. for value 153.65 report shows 153 but I need to display as 154.
Regards
KumarTo be more specific suppose u r having a key fig say KF having the value 153.65.
Don't set any decimal place for the KF. Just go to the properties and hide it
Now create a new formula and set the decimal places to 0 in the properties and use the following formula.
( FRAC ( 'KF' ) < 0.5 ) * FLOOR ( 'KF' ) +
( FRAC ( 'KF') >= 0.5 ) * CEIL ('KF')
Hope this helps -
Hi Everyone,
I am facing a very peculiar problem. I have installed SAP GUI 7.0. When I open the BEx Analyzer all Icons in the toolbar which are related to BEx are coming in different language. I have installed that 'n' number of times....restart the system installed it again and again but nothing is working out. Checked all options in administrator etc. everywhere default language is English.
Can anybody help me out.
ThanksSolved
-
Hi All,
i am having a strange problem when i execute a query in the BEx.
i am having a Master data infoobject C_PARTNR2 and it is having a compounding Char. C_ATTRIB.
Also it has some attributes like 0STREET60 and C_LINKO and several other characteristics.
the problem is - when i execute the Query it shows the two attributes ( 0STREET60 and C_LINKO ) with ' # ' values.
Whereas the data does exist in the P and S table of C_PARTNR2 infoobject. All other attributes are shown properly. but the above two attributes are shown with the ' # ' values.
Any idea if anybody has come across such a kind of problem ?.
Thanks in advance.
regards,
LaxHello Nagesh,
Thanks for the reply.
i am having all the data in all the tables.
the data is not missing in the tables.
when the query is executed only those two attributes show the values as ' # '.
rest of the attributes rare shown properly.
thanks in advance.
regards,
Lax -
Cumulation problem in BEX REPORT?
hi,
i am generating reporting FISCAL PERIOD WISE. the values of standard price(OPRICE_STD), moving average price(0PRICE_AVG) values are basically coming from R/3 directly.
0fiscper Company period std price mov avg price
2009001 20090101 40 50
2009001 20090102 40 50
2009001 20090103 40 50
2009001 20090104 40 50
no, when i run the report by fiscal period the values are showing 160 instead of 40, and 200 instead of 50 respectively.
when u drill down the values are 40,50 only for the company period wise. but how to display overall result as 40 for std price, and 50 for mov avg price in the bex report. that means how to do it in bex query designer.
regards
vadlamudithanks one and all , that problem has been resolved.
i have created structure for material types( Ingredients, packaging materials in rows)
when i execute the query by fiscal period the values which are showing is very high in the final result.
when i drill down by material and keyfigure(formula) values are not matching with the final result.
and if we execute by material wise rather than period wise the values are perfect.
pl tell me the solutio
regards
vadlamudi
Edited by: venugopalv on Sep 3, 2009 10:55 AM
Edited by: venugopalv on Sep 3, 2009 11:52 AM -
Hi,
Our 0material is loaded with hierarchy prdha, also
0prod_hier_attr is loaded-activated and 0prod_hier infoobject is loaded-activated as well.
The weird thing (unless for me) is that in bex only some 0materials have a data in hierarchy attribute; we check 0material records and the hierarchy is there same in 0prod_hier... the problem is only in the query.
Please some advices??
Thanks In AdvanceHI Neetu..
Please check the settigns of the infoobject in use..u need to select text and key for the description in buisness explorer tab of \inoobject definition -
Sorting problem in BEx/Portal
Hi all,
I am facing a problem while sorting an Infoobject in BEx or in portal.
For e.g I am having a PO Status Report in which I have PO, Trasaction description and calday.Now when I am executing that report in BEx and on right clicking -> Sort PO with Ascending/desceding by key/ Text it is working fine but while sorting the other characteristics like Trasaction description or calday the sort functionality is not working.
Please let me know why this is happening.
Thank you.I have also tried with changing the sort characteristic setting in the display properties of query designer but no outcome.
Is it something like sort functionality will work with only master data or key fields or transactional data.
Please let me know if this is the case with sort functionality.
Because for my queries the sort function is only working for key fields which is defined at the Infoprovider level.
Thank you.
Maybe you are looking for
-
I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up
-
How can you bend an image round a path in Illustrator?
Hello I would like to know how to bend an image to follow a particular path or shape in Adobe Illustrator CS4. The Warp tool in Photoshop produced the results closest to what I was aiming for, however it is difficult to shift one part of the image on
-
Limiting the Text Size in CRM 5.0 IC Web Client
Hello Experts, We have a scenario where in we can enter the text for a CRM Document (say Service document) in the text field of IC Web Client. We have noticed that we are even allowed to enter the text of size around 73 MB also (which comes into 1000
-
Setup tables for invoices header data (2LIS_13_VDHDR)
Hi experts, I am using 2LIS_13_VAHDR and 2LIS_13_VAITM to transfer data to SAP BW. Through the t-code SBIW, I I run the job to fill setup tables with invoices data. the job is completed succefully. when I check the extractors in RSA3, the extractor
-
What are the Technologies behind this mobile application ?
What are the technologies involved in developing this mobile application? https://store.sap.com/sap/cpa/ui/resources/store/html/SolutionDetails.html?pid=0000004878&catID=MOB&pcntry=US&sap-langua- Is this Native/ Hybrid? based on MBO/Odata The graph i