Problem in BI 7.0 while loding info cube

when i am loading data to info cube in bi 7.0 i am getting an error no sid foud for value ' 00000 ' of chareteristic 0currency

Each record in your incoming data source ( if the key figure is of type currency) should have a valid curr.
Looks like you are loading from a file. PL make sure you have valid curr in every record and then reload.
Ravi Thothadri

Similar Messages

  • Error while Loading info cube

    Hi all,
    I am getting error while i am loading from ODS to InfoCube.I have extracted data from CRM system to ODS.when i am loading from ODS to infocube i am getting Error as :Value 00000000 of charecteristic 0DATE is not Plausible.
    Regards,
    kals

    You can use conversion routine for your field 0pstng_date.
    The conversion routine which can solve ur prob. Try RSDAT conversion routine.
    You have any variable for 0DATE , if so I think its format is YYYYMMDD
    , give 99991231 instead of 99993112
    Edited by: Prasad B on Aug 21, 2008 8:32 PM

  • Error in Uploading the data in Info Cube

    Hi,
    We are implementing SCM 5.0 APO and ECC 6.0 in UK/I client.
    At the moment we are facing one problem in uploading the Excel file into Info Cube.which was working perfectly earlier.
    Through analysis, we come to know that data flows thru PSA. but  when we try to push that data from PSA manually system gives following error message;
    Runtime Errors         UNCAUGHT_EXCEPTION
    Except.                CX_RSR_X_MESSAGE
    What happened?                                                                                |
    |    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere along the call hierarchy.                                                                               
    Since exceptions represent error situations and this error was not                  
    adquately responded to, the running ABAP program 'SAPLRRMS' has to be    terminated.                                                                               
    Error analysis                                                                               
    An exception occurred which is explained in detail below.                                    
    The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught  and  therefore caused a runtime error.                                                            
    The reason for the exception is:                                                             
    No text available for this exception                                                                               
    Missing Handling of Application Exception                                                        Program                              RSABW_START_NEW                                          
    Trigger Location of Exception                                                                     Program                                 SAPLRRMS                                             
    Include                                 LRRMSU13                                              Row                                     78                                                   
    Module type                             (FUNCTION)                                            Module Name                             RRMS_X_MESSAGE 
    if somebody can give advice on this! As we could upload the data earlier perfectly.
    Thanks
    Regards
    Jignesh.

    Hi Jignesh,
                      I this the first time you are loading into the cube? Is it the a fresh installation?
    The error message doesn't help you much but I would try a couple of things
    1. Replicate the datasources in source system, Activate the transfer and update rules and then try to load
    2. Try loading only till the PSA and then try to simulate the update to cube. If you are using  BI 7.0, then just load the info package, it will load to PSA and unless you run the DTP, it doesnot update the cube.
    3. This can also be a GUI issue. Make sure that you have all the GUI files installed. Is it a dump with message "CX_RSR_X_MESSAGE"?
    Check the Note 763203 - Termination during InfoCube realignment
    Hope this helps. Please donot hesitate to ask more questions.

  • Problem while scheduling info package using HR datasource.

    hi experts,
    while scheduling the info package i am getting the following error.
    Delete init. request
    REQU_D340A67OSEQ9A6Q2B20X9SIOM before running
    init. again with same selection
    I think by deleting the setup it will work...
    am i right or is there any other solution for this problem..
    please reply soon.
    its too urgent.
    thanks n regards.
    uday shankar.

    Hi,
    You are correct there is no setup table concept in HR extractors.
    But there is a cache. Usually HR extractions will be full load. But it also supports delta. There is no setup table concept in HR.Once you perform your init (with or without Data transfer your delta path is set and delta will follow else can go for Full loads alone. It will extract data from the relevant tables like generic extractors. The data will be filtered based on the selection parameters.
    Except for payroll and time management rest all sub-functional areas supports only full load.
    In case of full loads, old data needs to be deleted to avoid duplicated records in the target.
    Auditing Information Technical name: 0HR_PY_PP_1
    http://help.sap.com/saphelp_nw70/helpdata/EN/c7/532d7835db9a41b744aea58ed699ed/frameset.htm
    Delta Update
    This DataSource supports delta updates. The source system fills table HRMS_BIW_PPDELTA with the date and time of the first data transfer (initialization) and the date and time of all subsequent data transfers. This information enables the system to perform a delta transfer. It only selects posting runs with the above statuses whose last changed on date is after the date in table HRMS_BIW_PPDELTA.
    If you use DataSources 0HR_PY_PP_2 (Posting Documents) and 0HR_PY_PP_1 (Auditing Information), you must transfer data to BW from both DataSources using the same selection criteria.
    Also
    http://help.sap.com/saphelp_nw04/helpdata/en/2a/77eb3cad744026e10000000a11405a/frameset.htm
    https://websmp201.sap-ag.de/~sapdownload/011000358700004478862001E
    /people/swapna.gollakota/blog/2008/01/14/one-stage-stop-to-know-all-about-bw-extractors-part1
    step by step
    https://websmp201.sap-ag.de/~sapdownload/011000358700004478862001E
    HR extraction:
    The HR module enables customers to effectively manage information about the people in their organization, and to integrate that information with other SAP modules and external systems
    HR broadly has the following modules:
    PA (Personnel Administration) and Organization Management
    Personnel Development
    Payroll Accounting
    Time Management
    Compensation
    Benefits
    Training and Events
    The Personnel Administration (PA) sub module helps employers to track employee master data, work schedules, salary and benefits information. Personnel Development (PD) functionality focuses on employees' skills, qualifications and career plans. Finally, the Time Evaluation and Payroll sub modules process attendance and absences, gross salary and tax calculations, and payments to employees and third-party vendors
    HR delivers a rich set of business content objects that covers all HR sub-functional areas.
    How the data extraction happens:
    Before getting into how the data gets populated into HR info cube
    Let's understand the term info type
    "An info type is a collection of logical and/or business-related characteristics of an object or person"
    Here the data will be extracted from an info type (PA, PD, time management etc) and for few other applications it is from the cluster tables (Payroll, compensation etc.)
    HR is basically master data centric because it is always related to people related Info Objects, such as Employee, Person. In most of the cases HR master data is defined as Time Dependent to enable historical evaluation. HR R/3 system records a specific period of validity for each Info type.
    Procedure to extract the HR data:
    Activate Data Sources in the Source system (R/3)
    Replicate Data Sources in BW system:
    Activate business contents in BW.
    Populate HR cubes with data by scheduling info packages.
    Note: Master Data should be loaded first
    Except for payroll and time management rest all sub-functional areas supports only full load.
    In case of full loads, old data needs to be deleted to avoid duplicated records in the target.
    Check the below links for more information
    Technical Considerations in Global SAP BW/HR Implementations
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/505351fe-ec8c-2910-c5b5-a43bbf53f6fc
    BW/HR Implementation
    https://websmp201.sap-ag.de/~sapdownload/011000358700004478862001E
    Hope this helps.
    Thanks,
    JituK

  • Short dump while executing info package in 3.5 data flow?

    Hi,
    i am getting short dump while executing info package while executing info package. it was working perfectly 2 days back suddenly it is giving this problem. it is a full load for info object text data and i have only 600 records. when i tried with " only info package" it is working perfectly n bringing the data into PSA. But when i use "PSA and the into data target" it is giving short dump.
    i replicated Data source and also i activated transfer rules, update rules still it is not working. When i check with another info objects it is working perfectly fine. i dont know what is wrong with only particular info object.
    Please find attached short dump.
    Thanks

    Hi,
    When you load transaction data I think there is a deadlock.
    Check in the process overview (transaction SM50) the waiting processes are in program SAPLSENA .
    The program SAPLSENA is the lock handler tool.
    Also check if  ACR is running on this target while your load is happening.
    Check in SM12 if there are any lock entries for the Infoobject to which you are loading data and on RSICCONT table .
    Try reloading after deleting the locks manually.
    Regards.

  • Error while creating Info Spoke....

    Hi,
    I am facing one problem while creating Info Spoke.I have 4 DSO which included in one Infoset & that infoset incluede in one Multiprovider. I want to creat info spoke on this Multiprovider.But when i changed the tab or at time of save & activate it gaves me error as "InfoObject ZCGNCRM2___F100 is not available in version A". I checked this info-obj.its already in active version. I reactivate it.I reactivate infoset & multiprovider also.But still exist this error.
    Please suggest me any solutuion.

    Hi Sandeep,
    Check this info object is included in any of your DSO or Info set and Multi provider.If yes check all are active or not.
    activate the info object once again using program RSDG_IOBJ_ACTIVATE and activate your Info spoke
    Check below article
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0d48577-9542-2e10-05a1-d6c1e07ea641?quicklink=index&overridelayout=true
    Regards,
    Venkatesh

  • Error Log while activation of info cube.

    Hi All,
      While activating the cube i'm getting the below error log.I though there there was an problem with installation.Again if i re-install also i'm getting the same problem.and i'm unable to any data and also my info source is not getting activated.. Coh\uld any one help me in this regard.......
    The error's are :
    Database log:            RSDGCA2021121810:23:20
    Program start============================================================
    Mass activation
    =========================================================================
    Process..................: system_1
    User.....................: SAPUSER
    Date, time...............: 18.12.2021, 10:23:20
    Platform.................: CUSTOMER-SAN(620)/ORACLE/WindowsNT/system
    Tool.....................: RSA1/RADMASG0
    Log......................: T, RSDGCA2021121810:23:20
    Program parameters:
    Input medium..............: Direct object entry
    Activation method.........: Activ
    Chk. mode.................: G
    Version to be activated...: M
    Versions to Be Deleted....: All versions are deleted
    Lock against paral. exec..: Shared
    Parallel mode.............: Switched off
    =========================================================================
    Number of objects to be analyzed: 11
    Number of relevant dependencies: 6
    Level 1:9 objects assigned, 6 less dependencies
    Level 2:2 objects assigned, 0 less dependencies
    Graph_Analysis: 11 objects on 2 topological levels
    Start phase 001 **********************************************************
    Activation of objects
    Activate objects at level 1
    Synchronous execution, no parallel processing *
    Activate table /BIC/DIC_SRI1
    Table /BIC/DIC_SRI1 was activated successfully
    Activate table /BIC/DIC_SRIP
    Table /BIC/DIC_SRIP was activated successfully
    Activate table /BIC/DIC_SRIT
    Table /BIC/DIC_SRIT was activated successfully
    Activate table /BIC/VIC_SRI2
    Table /BIC/VIC_SRI2 was activated successfully
    Activate table /BIC/VIC_SRIH
    Table /BIC/VIC_SRIH was activated successfully
    Activate table /BIC/VIC_SRII
    Table /BIC/VIC_SRII was activated successfully
    Activate table /BIC/VIC_SRIJ
    Table /BIC/VIC_SRIJ was activated successfully
    Activate table /BIC/VIC_SRIM
    Table /BIC/VIC_SRIM was activated successfully
    Activate table /BIC/VIC_SRIT
    Table /BIC/VIC_SRIT was activated successfully
    Synchronous processing: 1 sec., 9 objects, 9 costs
    Activate objects at level 2
    Synchronous execution, no parallel processing *
    Activate table /BIC/EIC_SRI
    Table /BIC/EIC_SRI was activated successfully
    Activate table /BIC/FIC_SRI
    Table /BIC/FIC_SRI must be created in the database
    Adjust table in DB >>>
    sql:
    CREATE TABLE "/BIC/FIC_SRI"
    ("KEY_IC_SRIP" NUMBER (000010)
    DEFAULT 0 NOT NULL,
    "KEY_IC_SRIT" NUMBER (000010)
    DEFAULT 0 NOT NULL,
    "KEY_IC_SRIU" NUMBER (000010)
    DEFAULT 0 NOT NULL,
    "KEY_IC_SRI1" NUMBER (000010)
    DEFAULT 0 NOT NULL,
    "/BIC/PR_SRI" NUMBER (000017, 000002)
    DEFAULT 0 NOT NULL)
    PCTFREE 10
    PCTUSED 60
    TABLESPACE PSAPSAN
    STORAGE (INITIAL 0000000016 K
    NEXT 0000010240 K
    MINEXTENTS 0000000001
    MAXEXTENTS UNLIMITED
    PCTINCREASE 0000
    FREELISTS 004
    FREELIST GROUPS 01)
    PARTITION BY RANGE (KEY_IC_SRIP)
    PARTITION "/BIC/FIC_SRI0" VALUES LESS THAN (0))
    ORA-00439: feature not enabled: Partitioning
    DDL time(___1): .........3 milliseconds
    The SQL statement was not executed
    Table /BIC/FIC_SRI (Error adjusting the database)
    Table /BIC/FIC_SRI was not activated
    Synchronous processing: 0 sec., 2 objects, 2 costs
    Activation of objects
    End phase  001 ***********************************************************
    Start phase 002 **********************************************************
    Final log
    Following objects not activated/deleted or activated/deleted w. warning:
    Table /BIC/FIC_SRI could not be activated
    (E- Table /BIC/FIC_SRI (Error adjusting the database) )
    Final log
    End phase  002 ***********************************************************
    Start phase 003 **********************************************************
    Statistics on activated and deleted objects
    Number of objects to be activated............:  11
    Objects not activated........................:  1
    Activated objects with errors in dependencies:  0
    Objects activated with warning...............:  0
    Successfully activated objects...............:  10
    Number of objects to be deleted..............:  0
    Objects not successfully deleted.............:  0
    Successfully deleted objects.................:  0
    Tables/views with DROP/CREATE................:  0
    No. of them marked for DROP/CREATE: 0
    Not marked for DROP/CREATE: 0
    Number of nametabs to be deleted.............:  0
    Successfully deleted nametabs................:  0
    Nametabs that were not successfully deleted..:  0
    Statistics on activated and deleted objects
    End phase  003
    Process..................: system_1
    Return code..............: 8
           |   Date, time...............: 18.12.2021, 10:23:22                                                                               

    Hi
    Your E-table of the Cube is not getting activated try activating it from SE11.
    orelse try program RSDG_CUBE_ACTIVATE to activate the cube .
    See the Mappings again -- try to activate entire data flow again.
    Hope it helps
    Edited by: Aduri on Dec 18, 2008 11:21 AM

  • Problem in Hibernate 3.0. while configuring with Oracle 9i

    Hi,
    I have a problem in Hibernate 3.0. while configuring with Oracle 9i.
    I make all necessary settings as per the requirement.
    My code successfully running with MYSQL,
    But if tried use Oracle 9i. then System generate the Following Exceptions.
    Please let me know the solution
    DEBUG - initializing class SessionFactoryObjectFactory
    DEBUG - registered: 2c9834f115ccc9360115ccc937600000 (unnamed)
    INFO - Not binding factory to JNDI, no JNDI name configured
    DEBUG - instantiated session factory
    INFO - Running hbm2ddl schema update
    INFO - fetching database metadata
    DEBUG - total checked-out connections: 0
    DEBUG - using pooled JDBC connection, pool size: 0
    ERROR - could not get database metadata
    java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1],
    [0], [], [], [], [], [], []

    Hi
    I alreay make all necessary chagens in cfg.file but still i have problem
    see the contenet fo .cgf file
    <?xml version="1.0" encoding="utf-8"?>
    <!DOCTYPE hibernate-configuration PUBLIC
    "-//Hibernate/Hibernate Configuration DTD 3.0//EN"
    "http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd">
    <hibernate-configuration>
    <session-factory>
    <property name="hibernate.cglib.use_reflection_optimizer">true</property>
    <property name="hibernate.connection.driver_class">oracle.jdbc.driver.OracleDriver</property>
    <property name="hibernate.connection.url">jdbc:oracle:thin:@sinpunap049:1521:esgdb</property>
    <property name="hibernate.connection.username">scott</property>
    <property name="hibernate.connection.password">tiger</property>
    <property name="connection.pool_size">1</property>
    <property name="hibernate.dialect">org.hibernate.dialect.Oracle9Dialect</property>
    <property name="show_sql">true</property>
    <property name="hbm2ddl.auto">update</property>
    <mapping resource="Student1.hbm.xml" />
    </session-factory>
    </hibernate-configuration>

  • Migration Problem in 2lis_11_vaitm for info cube 0SD_C03(Sales Overview)

    Dear Experts
    I am facing an issue for the data source 2lis_11_vaitm and 2lis_11_vcitm for info cube 0SD_C03. When i create transformation on update rule, it gets created with warnings but no issues. When i try making a transformation on update rule it gives errors about abap routines and start routines. Then i would go for migrating 2lis_11_vaitm but that cant be done because of above mentioned error. I have migrated other data sources same way. The reason i am doing so is because of making exact transformations as trsansfer and update rule.
    My objectives is migrating 2lis_11_vaitm and 2lis_11_vcitm  to 7.X etl flow. Am I right on the sequence of steps? cause my main issue is when my info package starts writing data in PSA in errors out for both 2lis_11_vaitm & 2lis_11_vcitm. The IDOC has the same problem. So migrating seems to be the only solution. Plz help and FYI my patch levels on bi system.
    compo           Rel.              SP-lev.           Supp. pack                        Desc.
    SAP_ABA     701     0010     SAPKA70110     Cross-Application Component
    SAP_BASIS     701     0010     SAPKB70110     SAP Basis Component
    PI_BASIS     701     0010     SAPK-70110INPIBASIS     Basis Plug-In
    SAP_BW     701     0010     SAPKW70110     SAP Business Warehouse
    BI_CONT     706     0000     -     Business Intelligence Content

    The errors I face during the transformation  activation while making them on the update rule are following.
    Start Routine: Syntax error in routine
    Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0HDCNT_LAST, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
    Rule 39 (target field: 0CRM_PROD Group: 01 Standard Group): incomplete master data rule
    Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0DOC_CLASS, group: 01 Standard Group): Syntax error in routine
    Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
    Key rule 44 (target field: 0VERSION): Initial update set
    it has as many routine as many syntax errors in routine.

  • 10.8.2 Problem#3 - Cursor sometime disappears while zooming

    Starting Info : https://discussions.apple.com/message/19932291#19932291
    10.8.2 Problem#3 - Cursor sometime disappears while zooming
    I'm always using Accesibilty/Zoom function and sometime while typing on Safari's textbo, cursor just gone.

    See this thread. It's been reported since 2011. I haven't yet seen a solution.
    https://discussions.apple.com/thread/3324908?start=0&tstart=0

  • Error while creating info object

    error while creating info object a character
    Info object may be a maximum of  000060 digits...... what would be the error?
    Thanks ALL

    Hi,
    The maximum length supported by one CHAR type infoobject is 60. Check whether you have assigned more.
    If you have to load more length ( more than 60) split the total thing into different infoobjects. Create different infoobjects and split the total thing into them - like 1st 60 char in 1st infoobject, char 61-120 in 2nd infoobject and so on. Then you can again concatenate them.
    Thanks,
    Indrashis

  • Version error while creating info package of data source 0fi_gl_10

    Dear Friends,
    I have replicated the data source 0fi_gl_10 into sap bw but while creating info package i am getting error " The DataSource 0FI_GL_10(E01CLNT200) does not exist in object version A". IS the manual activation always should be done for that ?
    Regards
    Nilesh

    Hi,
    Please check if the veriosn of DataSource is A or not. Sometimes it shows as active but if you open the datasource then it might be in modified version only. Do activate it manually, it will serve your purpose to create a infopackge.
    Regards,
    Anjum.

  • I had this problem: "cannot connect to itunes" while trying to download an app so i went to the settings and i kinda messed it up that now i have not apps or itunes icon on my ipad! :( can anyone help me?

    I had this problem: "cannot connect to itunes" while trying to download an app so i went to the settings and i kinda messed it up that now i have not apps or itunes icon on my ipad! can anyone help me?

    First, try a reset: hold down the home button along with the power button until you see the Apple, then let go.

  • My iTunes is freezing up while gathering info for iTunes Match.

    My iTunes on my laptop is freezing up while gathering info for iTunes Match. I have over 8800 songs on there. But it has not done this before. Is it a virus? Any help?

    Click the restore button.
    Use iTunes to restore your iOS device to factory settings
    If you can't update or restore your iOS device - Apple Support

  • Problem Reloading Info cube after Transport

    I have made some changes to a cubes dimensions. Then I transported these to Test and loaded the cube there, all worked fine. Then i deleted all the data from the same cube in production before transporting it up.
    In production my cube was clean and ready to be reloaded. When kicking off individual info packages I am recieving this message.
    "No requests are deleted from your info cube ZEXTSERV (Provisionally, as routine, and formula evaluations for the runtime of other selection conditions can occur.
    I then gives me the option to either continue or cancel. I pressed continue and the data loaded fine........because I knew I had already deleted old requests before transporting.
    ***all my loads are full loads....not deltas.
    Will this cause a problem if the info packages are in a process chain???
    I am using BI.7
    Please help

    there shud not be any problem in that..
    Did u deleted the total content from the cube? I mean both Fact table as well as the Dimension table as well?
    I dont think that there will be any more problems in ur cube...
    Just look at one more load to ur Cube.. I hope that this message wont come once again....!!!
    Will this cause a problem if the info packages are in a process chain???
    NO... its not the issue..
    Thanks

Maybe you are looking for