Problem in BPM Collect scenario

Hi,
I am implementing a collect scenario of BPM in which I am collecting Acccount details of a customer and posting them to receiver.
In Receiver Determination, I have two objects, one with Sender system and BPM process and other with BPM process as sender and Receiver System.
However, when scenario is run, in SXMB_MONI I see success flag for the processgin of message with Tilted green flag in column C stating that "Message Scheduled at the outbound End." I am not able to understand the meaning of this message.
I have checked queues; there are no queues with any messages stuck. Also, because there is no error in the processing of message, I am not able to check the point in BPM till where processing was successful.
Kindly let me know where I can go and check for possible causes of errors. Also, let me know if BPM process could be debugged at runtime.
Thanks and regards,
Bhavish Bhatia

to check the successful point of execution of the bpm u need to follow thru the grpahical workflow log which can be found either in the transaction sxmb_moni_bpe or traverse by clicking on the PE column.
u can check this below link for more on:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c">Monitoring ccBPM - Howto Guide</a>

Similar Messages

BPM Collect Scenario errors at transform stage

The BPM Collect scenario is using a Fork within a Block.
Branch 1 - Loop Receive Append Container Endloop
Branch 2 - Receive step of triggerIdoc
End of Block
Transform step - multiline container of XML documents to one XML document
Send step
BPM Errors at Transform step with JCo mapping not available.
Whilst BPM in Error (Workflow in Error) more messages being received but never processed as the RECEIVE event is "lost" for these messages.
We are looking at redesigning the BPM to reduce the likelihood of this transform error.
In the meantime was looking at ways to Alert the administrator straight away to the error. As we have a workaround to get the process going and to pick up the stranded messages. So have started setting up the ALERT categories as described in How to Guide, for Adapter and Interface. Will this work?
Also in the Transform step there is a box (system exception) but I can't enter anything in. Is there a way to do this if the Alert category doesn't report an error in the BPM. OR do I have to add the Transform step into a Block of its own?
Advice gratefully received if we come up with a working solution will post it out here. Have spent a large amount of time reading posts and blogs on here but have not got a clear picture yet of what is best to do.
thanks,

> Whilst BPM in Error (Workflow in Error) more messages
> being received but never processed as the RECEIVE
> event is "lost" for these messages.
This should give you an issue called Parked Messages. The best way to deal with this is to actually define a Local Correlation. In the Block Step properties, you will have an option, Use Correlation --> Give the name of the Correlation . This will make sure that when there is an error, the Correlation become inactiva and a new BPM instance is created.
> In the meantime was looking at ways to Alert the
> administrator straight away to the error. As we have
> a workaround to get the process going and to pick up
> the stranded messages. So have started setting up the
> ALERT categories as described in How to Guide, for
> Adapter and Interface. Will this work?
Not sure if this will work. The issue is that the messages are passed to the IE already and will be in wait step waiting for an active BPM 's receive step How will another interface pick up this message?
> Also in the Transform step there is a box (system
> exception) but I can't enter anything in. Is there a
> way to do this if the Alert category doesn't report
> an error in the BPM. OR do I have to add the
> Transform step into a Block of its own?
This is what is called exception handler. Defined a Exception handler for the Block. Right Click block, insert Exception Branch, give name of the Hanler and then you can select this in the Transformation Step's System Error. This is like Try - Catch of Java.
Regards
Bhavesh

BPM Collect Scenarios

Hi All,
We have a scneraio to collect IDOCs in BPM for a time frame of 5 minutes.The collection is based on correlation condition for same customer and its in infinite loop and a deadline branch is givenwith timout of 5 minutes.
We have obseved that for the IDOCs that were triggered never came out of the IP for one of the customer.They are stuck in PI
and in message being sent state for 12-13 hours even if timeout is given for 5 minutes
We have processed the same IDOCs in other environment and they got processed.
Could you please tell me what can be the issue ?
Why this problem is occuring,
Best Regards,
Harleen Kaur Chadha

They are stuck in PI and in message being sent state for 12-13 hours even if timeout is given for 5 minutes
You mean to say the deadline never reached? If yes then refer: Re: Problem with timeout exception on a block step
Regards,
Abhishek.

BPM collect messages error

Hi
we are experiencing problems in BPM Collect pattern, error is not clear.
Our payload before input to BPM
<record>
<row>
<key>1</key>
<val1>1</val1>
</row>
<row>
<key>1</key>
<val1>1</val1>
</row>
</record>
this is given to BPM, and BPM is following exact collect pattern in SAP Documentation like
1. Block with restricted by correlation (/record:key1), deadline with 1 minute, used by correlation
2. within Block, unlimited loop, with started recieve step, activated correlation, and append records with container operation
3. multi-mapping transform step, with multiple records to single record and followed by send step.
we are getting error in the blok step, no description of error.
BPM is activated without any errors
Please advise, appreciate all ur help.

Any body got the solution for this . I am having same problem .
My Payload as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:BpmPatternCollectMessageToBeCollected xmlns:ns0="http://sap.com/xi/XI/System/Patterns">
<ID>1</ID>
<OverallNumber>1</OverallNumber>
</ns0:BpmPatternCollectMessageToBeCollected>
for BPMPattrenCollectTime BPM and I amhaving error on outbound side in BPE
when I dig into technical details The BPM details as follows
Error during result processing of work item for Reciving Message Step
Regards
Murali

BPM collection question

Hi all,
In BPM collection scenario
Is there any way to capture all the messages ids(inside BPM) which are being sent to that BPM?
Any help will be appreciated.
Regards,
Ivá

Hello Ivan!
Yes. You might specify a WHILE or UNTIL loop inside a block of your BPM process. For example, create a FORK and then create on one path a Receiver Step waiting for a "STOP" message, and in the other fork path create an infinite WHILE step with another Receiver Step to gather the incoming messages (and appending them to a Message List container). Or you can just set a WHILE or UNTIL with a limited amount of messages, without the Fork.
Please check the Help page below for more information about this.
Workflow Builder:
http://help.sap.com/saphelp_nwpi71/helpdata/en/c5/e4b79d453d11d189430000e829fbbd/frameset.htm
Best regards,
Lucas

BPM Collect Pattern Scenario :Container is empty for the loop at run time

Hi Friends,
I am working on BPM Collect Pattern Scenario after looking into the example delivered by SAP in namespace http://sap.com/xi/XI/System/Patterns and IP name as BpmPatternCollectPayload.
After configuring the same and when it is run, I see strange behaviour as illustrated below
1. Container step is empty and not able to see the counter for which it needs to be incremented at runtime
2. I understand that Loop should start and it need to be incremented as when we get a new message into the same BPM.
But I observe that it is creating a new message and loop never stops and completes the condition and comes out to go to next step.
Request your help.
Regards,
Hussain

Hi,
define or declare a variable with name counter and type as integer in Container where you define abstarct variables...
Thanks,
Madhu

Problem regarding bpm message split scenario

hi experts,
iam doing a scenario file->bpm->file scenario
msg->msg1+msg2 message will be split like this
my second msg is logically deleted from system.i found this in PE of sxmb_moni
i got only the first part of the splitting.
start->receive->transformation->fork->two receiver determinations for two branches and-> after that two send steps after two receiver determnations -->close of fork->stop
sxi_cache is zero
where it went wrong.
could u plz tell me the reason when this will happen(second message is logically deleted).

HI
Are you following this blog
Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
Check with your Transformation step and receiver determination you are trying in fork.
Check with your mapping. Is it creating target messages properly.
Thanks
Gaurav

BPM Collect Transformation Step Raise Alert need help

Hi,
Scenario BPM Collect.
Block 1 - Multiple xml messages received and collected into multiline container.
Block 2 - Transform multiline container element into single message. Mapping Error throw Transformation Exception.
Block 2:Exception Branch - Transform multiline container element to error multiline container element (based on BpmPatternReqRespTimeOut with a twist).
Block 2:Exception Branch - Send multiline container element to Communication Channel for further error analysis.
Block 2:Exception Branch - Throw Alert BPM_ALERT Transformation Failure message.
Getting Compilation errors because I am not allowed to output a multiline container element...?
Behaviour without the Exception Branch Transform and Send is that the first message collected in the ccBPM goes to Green Flag and the others goto chequered flag when the BPM_ALERT is thrown. This is not desirable behaviour.
Would like to output multiple line container element so I easily know which group of messages failed ie file 1,2,3... so that I can go to the Error folder and repost them in the Sender Communication Channel if required.
Once this is working I am trying to identify which file had the conversion problem so I can filter if out from the others and process the others attempting to pass information from a UDF as to which item in the multiline container element I reached before I had a problem int he original mapping...?
I have read Michal Krawcyzk's blog on ALERT variables and Help on Throwing Alerts etc but I am progressing slowly with my solution...
thanks,
V

Thankyou Chirag for those Blogs.
The first is the one I have looked at most recently and the second has given me an idea.
If I change my mapping of the multiline container element each line holds an xml message to the error element by calling a UDF to map the payload across then at least I would have output my Payload that errored? I will try it and see Java coding is not my forte currently.
thanks,
V

BPM Collect Message dependent AND time dependent

Hi
I have a IDOC to file scenario where I have to collect all the IDOC until I receive a stop IDOC.
Once the End collect IDOC is received I have to do a n:1 transformation and write the file to the FTP.
The problem is, at times the IDOC which is suppose to end the collect loop gets stuck in ECC R3 system.
So Im wondering If I can do something like say, we have two options inside BPM both time dependent and message dependent.
In this case which ever comes first (the Stop/END IDOC or the Time say 3 mins) will end the collect process.
Can anyone pls suggest will it work and if so what are the additional steps I have to introduce in the BPM.
Pls advice.
Right Now these are the steps in the BPM Collect Message dependent.
1. Block (I have used correlation)
2. Fork inside the block
3. Fork branch one has a look with end condition as 1=1; then a receive step and a container operation inside the loop.
4. Fork branch two receives the end collect idoc.
5. Transform step outside the block.
6. Send step.
Thanks
Prasanna

Hi Abhishek/ Raj
Thanks!!
I have done the changes let me confirm after testing it once. In the mean time I have one more question regarding the same BPM, as I have mentioned in the first post, the BPM contains the 6 steps mentioned but the the 6th step is inside another block (Block2).
The steps 1 to 4 are inside Block1.
The step 5 ie the transformation step (n:1) is in between the Blocks ie not inside any block (hope im not confusing).
The second block is for sending the file to the FTP and based on the acknowledgement (transport level) I have to send an email.
So Block2 already contains a deadline branch, it is to wait for the positive acknowledgement for say 3 mins and send the error email if incase we dont get positive ack within the time limit.
My doubt is,
1. Is it the only way (having two block and two wait steps) to achieve this.
(one block for collecting and one block for ack)
2. Is there any way I can have a single Block in the BPM insted of two. If so what are the steps.
Having single block, Will improve anything??
Thanks
Prasanna

Interface Mappings in BPM Collect Pattern

Hello
I am new to XI development and currently facing problems while implementing collect pattern of BPM.
I am trying to map IDoc structure with target legacy format.In BPM I had a block with infinite loop where I am transforming IDocs to target legacy format.Then I am trying to transform list element (Multiline Abstract container variable) to form a single message.For this I tried to have interface map with Occurences 0..unbound..but while activation of Interface Map it gives error
<b> Mapping program Message does not match the interface mapping. The number or frequencies of source or target messages for the message mapping are not identical to the number or frequencies of source or target interfaces.</b>
If I use single line in Interface map then in BPM it gives error when passed Multiline element to this Interface map.
I checked the sample program provided by SAP but I found out that every message interface was using same Message Type which has got occurence as 1 but in the message mapping program its 0..unbound.
My question is can we have data type (or Message type )with Occurence as 1 and Message Mapping program using same message type with occurences 0..unbound..I tried to find such option but could'nt find that.Otherwise how to do Interface Map for transforming Multiline parameter of BPM to a single message.
Please help..Thanks in advance..
Regards
Rajeev Patkie

Initially I tried to perform test by tree view and it worked fine.But it was one message in the source and the same was in target.Later as given by you I updated XML source message.The source message looks like
******************Source Message***********************
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
    <ns1:MATMAS_to_Stockware_MT xmlns:ns1="http://mccormick.com/ez_dev">
      <MAT_List>
        <ZPITNO>121212</ZPITNO>
        <ZPIDS>Test Message</ZPIDS>
        <ZPPOPN />
        <ZPCNQT />
        <ZPZLOC />
        <ZPZPCB />
        <ZPZCPA />
        <ZPGRWE />
        <ZPSAEL />
        <ZSPLDY />
        <ZPFRAG />
        <ZPZCRO />
        <ZPZOPT />
      </MAT_List>
    </ns1:MATMAS_to_Stockware_MT>
</ns0:Message1>
</ns0:Messages>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message2>
    <ns1:MATMAS_to_Stockware_MT xmlns:ns1="http://mccormick.com/ez_dev">
      <MAT_List>
        <ZPITNO>78912</ZPITNO>
        <ZPIDS>Test Message12</ZPIDS>
        <ZPPOPN />
        <ZPCNQT />
        <ZPZLOC />
        <ZPZPCB />
        <ZPZCPA />
        <ZPGRWE />
        <ZPSAEL />
        <ZSPLDY />
        <ZPFRAG />
        <ZPZCRO />
        <ZPZOPT />
      </MAT_List>
    </ns1:MATMAS_to_Stockware_MT>
</ns0:Message2>
</ns0:Messages>
************************End Source*********************
if this would be the message multiline is generating its bound to fail as I guess every XML has one topmost element and over here.So I changed my source XML to look like
******************Start message******************
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
    <ns1:MATMAS_to_Stockware_MT xmlns:ns1="http://mccormick.com/ez_dev">
      <MAT_List>
        <ZPITNO>121212</ZPITNO>
        <ZPIDS>Test Message</ZPIDS>
        <ZPPOPN />
        <ZPCNQT />
        <ZPZLOC />
        <ZPZPCB />
        <ZPZCPA />
        <ZPGRWE />
        <ZPSAEL />
        <ZSPLDY />
        <ZPFRAG />
        <ZPZCRO />
        <ZPZOPT />
      </MAT_List>
    </ns1:MATMAS_to_Stockware_MT>
</ns0:Message1>
<ns0:Message2>
    <ns1:MATMAS_to_Stockware_MT xmlns:ns1="http://mccormick.com/ez_dev">
      <MAT_List>
        <ZPITNO>78912</ZPITNO>
        <ZPIDS>Test Message12</ZPIDS>
        <ZPPOPN />
        <ZPCNQT />
        <ZPZLOC />
        <ZPZPCB />
        <ZPZCPA />
        <ZPGRWE />
        <ZPSAEL />
        <ZSPLDY />
        <ZPFRAG />
        <ZPZCRO />
        <ZPZOPT />
      </MAT_List>
    </ns1:MATMAS_to_Stockware_MT>
</ns0:Message2>
</ns0:Messages>
**********************End Message****************
but this produces only one output message
******************Start Message***********************
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
    <ns1:MATMAS_to_Stockware_List xmlns:ns1="http://mccormick.com/ez_dev">
      <MAT_List>
        <ZPITNO>121212</ZPITNO>
        <ZPIDS>Test Message</ZPIDS>
        <ZPPOPN />
        <ZPCNQT />
        <ZPZLOC />
        <ZPZPCB />
        <ZPZCPA />
        <ZPGRWE />
        <ZPSAEL />
        <ZSPLDY />
        <ZPFRAG />
        <ZPZCRO />
        <ZPZOPT />
      </MAT_List>
    </ns1:MATMAS_to_Stockware_List>
</ns0:Message1>
</ns0:Messages>
**********************End Message****************
I am also pasting schema of message mappings
*****************Source Schema************************
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema targetNamespace="http://sap.com/xi/XI/SplitAndMerge" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://sap.com/xi/XI/SplitAndMerge">
<xsd:import namespace="http://mccormick.com/ez_dev" />
<xsd:element name="Messages" xmlns:p0="http://mccormick.com/ez_dev">
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="Message1" form="qualified">
          <xsd:complexType>
            <xsd:sequence>
              <xsd:element ref="p0:MATMAS_to_Stockware_MT" minOccurs="0" maxOccurs="unbounded" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
</xsd:element>
</xsd:schema>
********************End Source***********************
********************Target Schema******************
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema targetNamespace="http://sap.com/xi/XI/SplitAndMerge" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://sap.com/xi/XI/SplitAndMerge">
<xsd:import namespace="http://mccormick.com/ez_dev" />
<xsd:element name="Messages" xmlns:p0="http://mccormick.com/ez_dev">
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="Message1" form="qualified">
          <xsd:complexType>
            <xsd:sequence>
              <xsd:element ref="p0:MATMAS_to_Stockware_List" />
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
</xsd:element>
</xsd:schema>
****************************End Target*************
Thanks in advance.
Regards
Rajeev

BPM Collect Pattern:File to IDoc

Hi,
My scenario is File to Idoc. An invoice excel file will be sent by the vendor.The excel has a built in macro, which converts the excel to a csv file and file is placed in a file share server.
*Logic of Macro: *
There will be a button in the excel file containing macro. In one excel file there would be multiple invoices that contains different number of item lines, The macro checks the u2018Invoice Numberu2019, lines with the same invoice number will be saved in one CSV file. So for example a excel file contains 5 invoices, when press the button that contains the macro, there will be 5 CSV files created under the same path, each CSV file contains one invoiceu2019s information.
After this I have to post the Inovices in to SAP using an IDoc.
So, I am using BPM collect pattern to achieve this. In the collect pattern, I see a correlation defined on one of the source fields, What does correlation exaclty do in my case. Let's say I have defined a correlation on Source field called Invoice number.
BTW I am using FCC on the filed adapter to change the CSV(Invoice) to xml
Thanks,
Kiran

Hi
to use Xpath for your receiver det. ref these blogs;
a combination of logics should help you in this case ...
Customise your 'XPATH' Expressions in Receiver Determination
XPath to show the path (Multiple Receivers)
File to Multiple IDocs (XSLT Mapping)
Try removing BPM from ur scenario.
1:n could be achieved without BPM
Various multi-mappings and Optimizing their Implementation in Integration Processes (BPM) in XI.
Regards,
Suryanarayana

HTTP-RFC(BPM)-FILE Scenario

I have a problem on using the 'http-RFC(BPM)-File scenario'. When i enter values using the Client http adapter, it displays message telling that "BPE_ADDAPTER.SYNCHONOUS_MESSAGE"
The error msg is displayed below:
Result:
<SAP:Error>
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code>BPE_ADAPTER.SYNCHONOUS_MESSAGE</SAP:Code>
<SAP:Stack>The process does not support the given synchronous interface or does not support synchronous messages</SAP:Stack>
</SAP:Error>
Also in SAP XI monitor, the sender services along with the corresponding sender interfaces.
Expecting this prob will be off soon.
thanks
vinod v

Hi Vinod,
your process is asynchronous (no sync async bridge). But you send "Quality of Service = Best Effort" (Url paramater qos=BE). You should send "Exactly Once" (EO).
Regards,
Udo

BPM Collect pattern is not coming out and it is in loop.

Hi Experts,
We have implemented a BPM Collect Time pattern and it was working fine in Dev and QA environments perfectly. Couple of days back we have some server issue in Dev environment and Basis team has done some thing with File Storage. From that time, all our BPM's were not working in Dev. It is showing that the block is waiting for some event to trigger and it is in Process state. We have set it for 5 min and block is not coming out from loop. We exported the code to QA and it is working in QA. We tried SWU3 transaction as given in the below forum and it didn't help us.
bpm collect time infinite loop error
Some one please help us.
Thanks
Venkat
Edited by: Venkata Gupta on Nov 27, 2008 12:54 AM

Hi
Is Your BPM having deadline branch ?
If there is any system Exception then catch it.
http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm.
According to thread mentioned by you ,Schedule your Missed Deadline Branch.
Also check your BPM using transaction SXMB_MONI_BPE and find out which step have error.

Problem in using COLLECT statment

Hi experts,
getting problem in using COLLECT statement. attaching my code below.
LOOP AT it_final1 INTO wa_final1.
     LOOP AT it_final INTO wa_final WHERE vagrp = wa_final1-vagrp AND verwmerkm = wa_final1-verwmerkm.
       wa_final1-anzwertg = wa_final-anzwertg.
       COLLECT wa_final1 INTO it_final1.
     ENDLOOP.
     CLEAR: wa_final1, wa_final.
   ENDLOOP.
here , i want to use collect statement only for "anzwertg" field from internal table. but 2 more fields also getting compressed .
attaching screen shot
here, original_input and max fields also getting compressed.
could anybody please help me out in this.
Thanks in advance.
Regards
satish

Hi satish....
collect statement works based on char fields..
by default it will taken char fields as a key fields .........
if any char field is repeated then corresponding numc values will be added....
other wise it will act as a APPEND statement......
Here in ur code there is no char field then how it will caliculate that values...
just check it once..
Regards,
Vamsi....

BPM collect pattern based on payload

Hi,
i am doing BPM Collect pattern based on stop message which is RFC. Means, i need to collect the IDOCs until i get the RFC from another system.
For this i am using predefined pattern BPMcolllect pattern which is in BASIS SWCV.
is it possible to do with out correlation?
if correlation is required, there should be one common fiield between two messages?
Thanks,
karthik

Hi ,
Your design it self wrong, when you develop interface as a sender IDoc , then how come you will receive RFC in to BPM??
so check your requirement with your client, if you want to collect messages there are different ways, implementing patterns in last option.
search in sdn.
Regards,
Raj

Problem in BPM Collect scenario

Similar Messages

Maybe you are looking for