Problem in Bulk Printing

Hi Experts,
Please Help in this :
I have 2 Pages on my Smartform, while printing the Single copy of FORM Print is coming OK but if i am printing the form in BULK after 1st copy every copy of the form is coming with the top margins shifted below. (Note : IN Print Preview even for BULK Printing everything is coming OK, margins are shifting only at the time of Printing for every copy other than 1st).
Regards,
Rahul

I guess, below steps may help you to close the thread.
1) Go to transaction code SPAD
2) Select Full administration
3) goto Device Type (tab), click display
4) Double click on the device type that is linked to your output device.
5) Click on Formats
6) Double click on the page format(Ex: DINA4)
7) In Format (tab), make sure
Printer initialization:
# reset
\eE
# LaserJet Series II ECMA-94 Latin 1 character set
\e(0N
# disable perforation skip mode
\e&l0L
Reset After Exit
# reset
\eE
End of Line
\r\n
Rest all as blank.
Regards,
SaiRam

Similar Messages

Problem with Bulk printing of invoices using VF31.

Hi,
I tried to give bulk print of invoices using VF31, for around 200+ copies. Printing was going on but suddenly stopped after 50 copies get printed.
Situation is the same even after i retry it.
Can someone advice on the reason please.
Thanks.
Best regards,
Srikrishhna13

Issue identified and there was a problem with Network.

Firefox prints only every other page on a bulk print run, why?

I use Firefox to bulk print Ebay invoices. It's been just fine for years. But 2 days ago it started printing just every other page in full. Intervening pages had only the top 20% printed (headers and footers are set to blank), and it prints one extra blank sheet at the end of the print run. 'Fit to page width' is enabled. I print at A5 size. When I check print preview it shows the problem exactly. The preview confirms 80% of every second page is missing, and there is an extra blank page at the end. Anyone else have this problem?

Hi ashura,
When you print, check to see which presets and defaults are selected. It could be a stored preference to only print every other.
In order to reset these preferences in Firefox:
*[[Fix printing problems in Firefox]]
Did this help?

Problem with HP printer hplip is not starting

My daemons line
DAEMONS=(syslog-ng portmap dbus hal network netfs hplip cups clamav alsa acpid !crond kdm)
I have installed it using pacman. If I run pacman -S hplip I get a message saying it is already there.

Okay, after a search I come up with the preferred printer installation method using the hp-setup command line tool. As this is supposed to be the 'HP' way to setup the printer and use hp-toolbox I decided to go this route. Naturally, the output is not promising:
# hp-setup
HP Linux Imaging and Printing System (ver. 0.9.8)
Printer/Fax Setup Utility ver. 0.7
Copyright (c) 2003-5 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
[ERROR]: No devices found.
[ERROR]: Error occured during interactive mode. Exiting.
Now, why the heck would it not find the device when it is already set up via CUPS and working properly in the desktop environment? The latest hplip version is 0.9.10, but I somehow doubt using the 0.9.8 would cause this type of problem as the printer I use is not a recent piece of machinery.

Problem with HP Printer Utility and Mac OSX 10.5.4

I have a problem with HP printer Utility. When a standard user adds a new paper profile HP Printer Utility asks to type an administrator's name and password to allow HP printer Utility to make changes. Is it possible to avoid this? Otherwise I have to give admin rights to every user because they have to be able to add new papers. HP printer Utility sharing and permisssions are set to read and write to everyone.
HP designjet Z3200
MacOSX 10.5.4 (Mac pro intel)
HP printer utility 3.6.0.

Just found an email HP Support sent to me back in January 2008, about this issue
"Hello Hunter,
Thank you for contacting HP Total Care.
There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
Your issue cannot be resolved until the 10.5 driver is developed and released.
To sign up for an update as soon as it is available ...click on the link below:
HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
If you need further assistance, please reply to this message and we will be happy to assist you further.
You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
For information on keeping your HP and Compaq products up and running, please visit our Web site
at:
http://www.hp.com/go/totalcare
Sincerely,
Dave
HP Total Care"
I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

Sale Order Bulk Print

Hi Friends,
Thanks in Advance.
Is there any Report Program for the Sale order To Take Bulk Print .
Please Tell the T.Codes Other Than VA05N, and the Report Program RSNAST0D.
We had tried with the Report Program RSNAST0D. but no use.
Regards:
Sridhar.J

Is ur requirement like triggering multiple sales order output types for printing u can write ur own program for it.
if ur requirement is as i have understood let me know, i'll tell u how to proceed further
кu03B1ятu03B9к

T.code FBL5N: a problem with the print of the output list

Hi All,
with reference to the t.code FBL5N, I have a problem with the print of the output list of the report.
When I execute the print, I obtain one customer for each page printed.
I wonder if is possible to obtain more customers for each page printed.
Could anyone help me?
Thanks
Gandalf
Edited by: Umberto Gandalf on Dec 21, 2008 10:36 PM

Hi,
Though personally i havent tried this option, check the same
Go to Menu: Settings >> Switch List
This will make the value displayed in ALV format and then try taking print outs.
Regards,
Sridevi

Problems with my printer HP Officejet pro 8600 Plus + Yosemite

Hi got problems with my printer HP Officejet pro 8600 Plus till I installed Yosemite it is not recognized so what can I do now.. No new drivers found by HP

Thanks for this AnnRT!
I've spent the best part of a day trying to figure this out. Everything was fine and then one day nothing worked! I have narrowed the issue down to Bonjour via WiFi as everything worked fine via USB, and via IP over WiFi.
I've now set a static IP for the printer and things seem to be working fine again
Thanks!
Chris

Problem with Direct printing of PDF with Barcodes in R12

Hi All,
We are facing a problem in direct printing in EBS R12 with xml pdf reports which contains some barcode fonts. We are using fonts from IDAutomation for barcodes. Printing from request output is working fine. But when it is printed directly everything get printed other than the barcodes. Did anybody face this problem before and fixed it?
Regards,
Benny

Benny,
Output from XML Publisher comes out correctly. The barcodes are stripped off during pdftops conversion. Any idea?
How did you verify the above?
PASTA 3.0 Release Information (Doc ID 239196.1)
BIP PDF Output Does Not Print MICRD Barcode Font - View Output Ok (Doc ID 747195.1)
Thanks,
Hussein

Problem with pdf-printing in Adobe Acrobat Pro

Hi,
I have Adobe Acrobat Pro 9.4.3.
PDF-printing has always worked great but suddenly there is some kind of problem.
After printing a excel-document from "Print to pdf" built-in function in MacOS OR Adobes Printer I have corruptet pdf-files when showing them in Adobe Reader/Acrobat, but the MacOS Preview-software shows them correct.
So, there cannot be any problem with the printing, but the local preview on my computer using Reader or Acrobat. I dont even use the Myriad font in the document, I use Verdana.

You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
Read about the problem here: http://www.tidbits.com/article/12078

HP Officejet Pro 8600+ "There is a problem with the printer or ink system..."

I have an HP Officejet Pro 8600+ that is coming up with an error message. This just happened out of the blue yesterday. The printer is just over a year old.
It says:
"There is a problem with the printer or ink system. Print head missing not detected incorectly installed or incompatable"
I have removed and reinstalled ink cartridges, the head, unplugged, cleaned, etc. etc.
HP Officejet Pro 8600+
Product Number CM750A
Serial Number {Content Removed}
Not under warranty
Please advise.
This question was solved.
View Solution.

Sorry that you are experiencing this problem. Here is a link that may assist you with the ink system.
http://goo.gl/BXDFf
It seems to be a bad print head, or it needs manually cleaned with lint free cloth and water. If these steps do not resolve the issue, contact HP Support (1800-474-6836).
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Problem with the printer or ink system code 0x610000f6 HP model 6700 premium

Hello, I have recieved an alert for the second time in a week stating that there is a problem with the printer or ink system. The alert prompts me to turn off, then on the printer. If problem persists, contact HP. 0x610000f6. What could be the cause for this type of alert to appear?

'0x610000f6' error message appears if there is a 'Paper Jam' or a 'Carriage Jam' in the printer.
You can experience following issues:
The product won't print.
The print job stops unexpectedly.
To resolve Error code '0x610000f6' follow methods provided in below mentioned link
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01620497

Problems with HP printer and PSE 11 (was bill v)

When using my HP 7020e photosmart printer and Adobe photoshop elements 11, I get a very small white border on the prints. I have set for borderless printing. Adobe says the print size is 4.2 x 6.18 instead of 4 x 6. Any suggestions?

I had already set it to borderless but it still prints a very small white
border. HP had no solution. I am ready to send the printer back to them.
In a message dated 1/14/2014 5:47:22 A.M. Eastern Standard Time,
[email protected] writes:
Re: Problems with HP printer and PSE 11 (was bill v)
created by hyadav (http://forums.adobe.com/people/hyadav) in Photoshop
Elements - View the full discussion
(http://forums.adobe.com/message/6010537#6010537)

Problem with Dell Printer and Wireless Router

I have a new Linksys Wireless Router (3100) and it handles 3 laptops, PS3 fine. But I have a Dell 715w network printer (also new). I have it set up on the network, and it works fine upon setup. The problem is the printer does not work all the time. Sometimes I can get an error message, sometimes it says it is busy, and other times it literally takes a long time to load and then does not print. I usually can get it to work again by rebooting and turning off the router and printer and laptops, but this hit or miss is very annoying and I never know when it will do this again, usually after a week or two. I wonder if the problem is that the 3 laptops all have different OS - XP, Vista and Windows 7. Dell tech support won't help as they say they don't support routers, but I am wondering whether the problem is ina s etting or if this printer is malfunctioning. any help would be appreciated

Yes. You have to key-in the IP address to the printer.
Basically, if the printer is set to obtain IP address from the router, it will be provided with a random IP or any IP available for the next device that will connect, on this issue, your printer. So there's no permanent IP address for the printer, making it a little hard to find at times. Compare it with the a static IP, your computer can easily map it since it doesn't change.

Problem with my printer "sorry not recognised"

Dispite posting the problem i had after MUCH hard work and searching for how to do this, i never got a reply (i thought this was a support forum), i hate to say it but support from HP has seriously gone down hill, i have a problem with my printer which is in warrenty can i send and email NOOOOOOO cos i have to put S/N and product number i put them in but i get "sorry not recognised" How the hell are you meant to get any support when they make 99% impossible to to post and email them i am sorry HP but your support is a shambles, your heads should be hung in shame.

Same problem and the same printer, Yosemite not recognize the printer (which I think is incredible, Windows was better in these areas to get a new OS).
Some advice from those who have been mentioned here and do not solve the problem?
If I had known I stay with Snow Leopard, worked best on Imac mid-2010.
Very unhappy with Apple, had understood that they were more serious and respectful to customers.

Problem in Bulk Printing

Similar Messages

Maybe you are looking for