Problem in Business content activation

Hi experts
After activating business content i am getting the following message.
Log could not be written to output device T
Also ,The selected objects are not getting activated
I checked RFC connection , but i am getting rfc connection is ok
What may be the problem
Anyone please help me

Hi,
when you are installing the business conetet does you checked the source system option of that objects , check both the self source sysytm and R/3 source system and try toi do install.
once again cam e out of the ( log off) and do collect the one object with wiyh only necessary objects and do installation , once it is succeful then try for all objects.
In your case when installing for that object all the tablesa nd every thing shoulkd be formed but Log could not be written to output device T log is not appering .
so it is better try with each object first then go for all objects.
Thansk & Regards,
sathish

Similar Messages

Business Content Activation - run time error

Hi guys,
We were at plugin 2002.1. We installed PI 2002.2 and PI 2003.1 on top of it.
After the plug-in upgrade, we are at support pack 9 for SAP-BW and 13 for BI-Content. For aba and basis, we are at 620 and support pack 32.
As part of the regression testing after the 2003.1 plugin upgrade, we found out that the business content activation abends with the following run time error.
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Exception CX_SY_OPEN_SQL_DB
Looks like it is trying to insert into table RSOLTPSOURCEFIET and the row already is existing. I thought the activation process is supposed to update something if it is already out there.
If we just select the 'only necessary', the activation goes through ok, but if we select 'before and after in the data flow', we get this abend.
Any clues???
Best regards,
makaleem

Hi Seow,
This is how I resolved it. I looked at the ST22 closely and one of the messages indicated that the number range is missing in tran SNRO for an infoObject. I created an entry for that infoobject using SNRO and tried activation and it worked.
When we created an OSS for SAP to look into it, they recommended the following two things. I tried these two but it did not work. I am mentioning them below just in case they may help you.
1) Sometimes there is inconsistency in the content cache when trying to activate objects and we have to delete the repository cache. To delete the repository cache, go to RSA1 ---> Business Content -
> Extras ---> Delete Rep Cache
2) Execute SAP_DROP_TMPTABLES program for types 1,2,3 and 6.
If this helps, don't forget to assign points.
Abdul

Restrict Business Content Activation

Does anyone know of a way to restrict business content activation while still allowing developers to maintain objects in BW 7.0? I ran a trace while someone was activating an InfoObject and didn't see anything that I could use to achieve this level of control. If I remove the S_RS_ADMWB Maintenance (ACTVT=23) authorization for INFOOBJECT, then that stops the activation; however, we want our developers to be able to maintain existing InfoObjects. We just don't want most to be able to activate business content.
Thanks,
Gail

Thanks for your response, Raghu.
We have our own SAP development team at my company and don't typically use many consultants. It has always been our philosophy to allow our SAP developers to have comparable access across all our SAP development environments (e.g., ECC development, BW development, etc.) for cross-training purposes. But in reality, only a handful of our developers are very knowledgeable in our BW environment; we call them our "BW Administrators". These BW Administrators have concerns that one of the other developers who has played around in the BW environment but isn't all that knowledgeable might activate business content without realizing the implications of what they're doing. We would like for all of our developers to have RSA1 etc. so they can learn more about BW; however, per request of our BW Administrators, we want to restrict them such that they can't activate business content. But as you said (and per authorization tracing that I've done), there doesn't appear to be a way to restrict them from activating business content without also restricting them in other areas where we don't want them restricted. I guess we'll have to rely on administrative controls (i.e., training).
Gail

Taking too much time incollecting in business content activation

Hi all,
I am collecting business content object for activation. I have selected 0fiAA_cha object,while cllecting in the activation but it is taking too much time and then it asks for source
system authorisation and then throws error maximum run time exceded. i have selected data flow before there.
What can be the reason for it.
Please help..

Hi ,
You should also always try and have the latest BI content patch installed but I don't think this is the problem. It seems that there
are alot of objects to collect. Under 'grouping' you can select the option 'only necessary objects', please check if you can
use this option to install the objects that you need from content.
Best Regards,
Des.

Business content activation 7.0

Hi,
Recently we have upgraded from BI 3.5 to 7.0.
We are facing a problem where in while activation of business content for some BI infoobjects some of the objects are not activated.
What f i consider revised version and activate it, do i get object upgraded to 7.0 version?
Regards,
Aman

Hi Aman,
Yes, you can try activating the revised version as it would be version 7.0, I think it should work 100%.
(or) You can also try reinstalling the infoobject from the beginning.
Cheers,
Habeeb

Business Content Activation

Hi All,
I have installed Datsources at R/3 side. ButI haven't replicated them to BW yet. Now, I want to install the business content in BW. Do we need to replicate the Datasources before we activate the business content? Does this make any difference.
I haven't installed any master data datasources in R/3. Does this affect the activation of Business content in BW anyway?
Thanks,
RPK.

As long as you have never uploaded the data to BW cubes you can change the datasource at R/3 any number of times.
Suppose you have replicated the data source, installed and activated the business content and also loaded the data into cubes.... after this you are adding one more field to datasource.... you are replicating it .... you have to check whether that column is available in the cube or not ....and once again doing a full (init) upload the data will get duplicated in Infocube. If you are using ODS in between then there is no problem.....
In this case it is better to delete all the data in cube and do the full load once again ....
All the above steps are tedious so it is better to have a exact requirement of which data has to be updated, freeze the requirement and get the approval and then do the data load.
Regs
Gopi.
Assign points if it helps ...

BW 7.3 and ECC 6.05 Problem with BI Content Activation Objects

Hi Experts,
I'm trying to activate the Business Content 0HE (Higher educations) and using the procedure suggested by the document "Campus BW 7 for Content Management".
I have done what the manual indicates.
1. Enable data sources in the source system (RSA5)
2. I replicated the data sources in BW (replicate).
3. I tried to activate the DSO in the Business Content.
The problem that arises is that a large number of infobjetos not activated and show me the following error "Attribute characteristic OBJECT_NAME from CHAR_NAME not (Actively) available".
I tried with all three types of activation 1. Before the flow 2. Only items needed 3.Before and after the flow. In either case all objects are activated.
In my case I tried to activate the DSO "0HE_DS01."
I've done wrong?
What should I check?
Thanks,
Ramon Sulvaran

Hi,
If you are in R/3 4.6 or higher, or if you are in ECC 6.0, the concept is equal. maybe just options can changed.
For the dataflow this is the same steps. the only difference is if you use V7 dataflows or V3.x dataflows. Fomr R/3 same concept.
Regards
Cyril

Different Problems during Business Content Installation in BI 7.0

HI GURUs,
          I'm working on BI 7.0. Here I'm trying to do business content installation and facing the following problems.
Question 1:
          Let's say when I'm trying to install 0MATERIAL infoobject
Scenario 1:
( with Necessary Objects as Grouping), the job is finishing succesfully, but when I look for 0MATERIAL in Infoobjects of Modelling it is found in Unassigned characteristics Node where as it should have been in 0MMIC_CHA01 Catalog & secondly it's not in Active state. When I tried to manually activate it I'm getting the error stated in Fig 1b of attachment.
When I tried for Object Maintanance of 0MATERIAL in Business Content Screen i'm getting the same error (Fig 1a & 1b).
Scenario 2:
(_with Dataflow before and afterwards as Grouping_). In this scenario i'm getting the issue shown in fig 2. I would like to understand why this issue is popping up, specially the source system issue.
Note: The Figures are found in the file attached with this link.........
           [Bi Content INstallation Error Doc|http://rapidshare.com/files/269891244/BI_Content_Installation_Errors.doc.html]
Question 2:
         Why are many of the infoobjects like 0Customer, 0Material etc getting assigned to Unassigned Characteristics instead of getting assigned to their respective Characteristic catalogs.
Note: It would be much more helpful if the solution is provided with reference to SAP Note, though alternate solution is always welcome.
       Hoping for a early optimistic solution.
Regards,
Syed Shujaath Ali.

Hi,
Maintain the material number length in your BW system, tcode- OMSL. Due to this you are getting error, conversion settings are not found for 0material. Check in your source system, what is the material number length has mantained by functional team.
It will sove your issue.

Update rule could not be found during business content activation

Dear BW experts,
I am having an issue activating business content for an update rule (2LIS_03_BX) for 0IC_C03. Below is a log of the error. It seems like the system is not recognizing the update rule for some reason. Can somebody please help shed some light on this.
Installation (simulation mode) of: Update Rules (UPDR)
Transfer/Merge of the Content Version (Object Type Update Rules )
Object Update Rules BW9VUFZSUYTTIZS0HT9I4U3RP: Installation of the Content Version
Transfer update rules IC: 0IC_C03 / IS: 2LIS_03_BX
Object UPDR BW9VUFZSUYTTIZS0HT9I4U3RP could not be found
Transferring the 1 objects from type UPDR took 1.2 seconds
Post-processing of Objects after activation
The post-processing lasts 0.0 seconds
Thank you.
Andrew

Ravi,
Thanks for you reply. I checked the underlying cube (0IC_C03) and the info source (2LIS_03_BX) and they are both active. I didn't choose the option in data flow before and after because it would have brought way too much contents which I don't need. Instead, I only activated the info source and update rule individually. All three info sources (2LIS_03_BF, BX, UM) and the info cube were successfully activated. I am only having problem with the update rule.
Any other ideas?
Thanks,
Andrew

Business Content Activation of business partner

Hi,
I am activating standard business partner from business content.The business partner we have right now is of version 3.3/01 and has lot of custom fields. When I am activating the version 3.5/03 I want to make sure I don't lose those custom attributes and also want to know how this will impact the cubes,ODS,Infosets,Update rules,Transfer rules, queries etc associated with this InfoObject. Can anyone please help me out with this issue.
Also while trying to simulate installation of an InfoObject,it ends up with red light. It gives me a message that one of the attributes in the latest version is a navigational attribute and the older version it was a display attribute.Hence while simulating I check both the install and match/copy box so that I can transfer the selections without having to make it navigational but end up with the red light. Is it advisable that I go ahead with installation or how should I go above it.
Thanks,
Kal

Kal,
when you activate the new version , the version is changed from M to A and the new business content would become the active state...
But then since the old BPartner IOBJ is being used in ODS.. cubes etc , I am not sure if your Business COntent installation can proceed since there is master data as well as the same being used across BW.
You could try a merge instead to see if he new fields as part of the new business content is carried over.
Hope it helps.
Arun
Assign points if useful

Query modification problem after Business Content upgrade

Hi,
We have upgraded two systems from Business Content 3.1 to BC3.3. After the upgrade we have a problem when opening queries for modification: a dialogue window is opened and system says:
"<i>AUTOMATIC CORRECTION
The following objects were not found when accessing server
Press 'Repair' to correct the problem (incorrect parts of the query are automatically deleted)
Press 'Cancel' to undo the last action
Missing objects:
- InfoObjects
| |- InfoObject 0HIER_VERS
- Affected Items
   |- Hierarchy version</i>"
Strange thing is that the problem cannot be reproduced on consultants' laptops, only on clients' PC-s, so we believe there must be something about Windows/Excel security that produces the error message.
Have you ever experienced this (kind of) problem before? Do you have any idea what I should check?
I checked
     - Macro security settings in MS Excel,
     - logged on to the PC's as Administrator
     - logged on to BW with clients'/consultants' user ID's on clients'/consultants' PC's, problem appeared only on client PC-s
     - SAP GUI version (it is the same)
     - MS Excel, MS Windows version (the same)
I have also checked InfoObject 0HIER_VERS, it really does not exist in the system. But it does not exist in our Production system either, while the query is completely the same in both systems.
0HIER_VERS is a "technical attribute" (as I read in an SAP documentation - however, I don't really understand this term), it is attached to 0CS_GROUP (Consolidation group).
Thanks,
Csaba

Hi,
Before checking that did u acvtivate and update all the datasources at the source system level.
Thanks
sampath

Datasources in 3.X in a new BI 7.0 Business Content Activation

Hi all,
When Installing Business Content for a BI 7.0 Installation, some objects like Datasources, Transfer Rules and Communication structures are activated under 3.X format.
Is there a way to install all Business Content in 7.X format, different from a migration process (which is a manual process)?
Does this extractors (3.X) have any performance issues in case of use them exactly as they are delivered from Business Content?
Best Regards
Jaime Benavides.

Thanks all for your answers.
I understand that a migration process can be executed to old 3.X datasources, but this is a manual process.
My point here is that the activation of a brand new business content of an Instalation NW 7.01 enhancement package 1 and with a Bussines Content Release = BI Content Add-On 4 SP 03 have some elements (datasources) in 7x Version (transformations and DTP´s) and some others in the old 3.x version (transfer Rules and communication structure).
In the moment of ACTIVATING the Business Content, there is not an option to migrate, but the standard Business Content delivered for this scenario is sometimes 7x, and sometimes 3x (i.e. CO_OM_CCA extractors).
I need some documentation to point that, besides some best practices of regular UPGRADES, the STANDARD deliver of a business content of this scenario contains both 7X Datasources and 3X Datasources.
Thanks a lot for all for any additional ideas.
Best Regards,
Jaime Benavides.

Business content activation in a fresh implementation

Dear Gurus
Before i begin let me state that i did check and did get information about activation...my concern is that i am new to implementation and i want to know exactly what are the steps that need to be followed at R3 end and in BI when we imlpement a fresh system as far as business content is concerned.As of now the functional team is setting up the R3 system...appreciate your inputs on this in detail....

Step 1: Define Logical System in R/3
Step 2: Assigning Logical System to Client
Step 3: Setting Up an RFC Destination
Step 4: Distributing Data Model
Message Types Involved in Process of Data Loading
Step 5: Generating Partner Profile
Step 6: Maintaining Message types in T-Code WE20
Communication Setting between BW and R/3:
Creating Source System (SALE): This step creates source systems which are to be connected.
1.
Assigning Source System to Client (SALE): This step gives a logical name to a SAP Client from which the communication is to be established.
2.
Setting up RFC Destination (SM59): This step is required to establish remote connection to the partner with which Source system is trying to communicate. Here one has to maintain the logon and IP details of the target system.
3.
Distributing Data Model (BD64): A distribution model is used to model a distributed environment in which you specify messages exchanged between sending and receiving systems. Here one has to define the message protocols with which the two systems will communicate.
4.
Generating Partner Profile (BD82): This process generates a partner profile for each system with which your system communicates. Outbound records are created in the partner profile for each outgoing message, and inbound records are created for each incoming message.
Note: If one distributes Data Model before generating partner profile then one has to redefine partner profile in other system also (repeat step in both system). In this document we are generating partner profile after Distribution of data model so as to demonstrate how to maintain inbound and outbound message types in WE20.
5.
Maintaining Message Types (WE20): This process is optional. Generally while generating partner profiles we automatically get the respective Outbound and Inbound messages, which can be checked in T-Code WE20. If the message types are not defined then one can manually do it by following this process.
Regards,
Suman

Business Content activation and change - BI upgrade

Hi Colleagues,
I am working on a project on which one.
1. Developpers have activated SAP BI business content.
    and for minor changes, they will directly modify the business contents infoprovider.
As example.
1. They will activate 0IC_C03 Material Stcks/Movements (as of 3.0B)
2. They will change cube structure :
   - Add a material plant dimension with 2 characteristic inside.
    - Add additional field in a existing dimension : 0company_code inside Location Dimension.
I always have worked on project on which one we made a copy of the business content infoprovider before to change it.
QUESTIONS :
I would like to know what is the impact of changing directly the infoprovider of the business content ?
Is there an issue with BI upgrade ?
Is there any SAP BI recommendation regarding system development to minimize impact on BI upgrade ?
Cheers,

It's always better to use BC Objects as template if you want to do any customizations to the standard objects.
For any reason if someone again installed bc for the same object ,assume person doesn't check match option ,so the std object will overwrite the existing active version and as a result the customizations for the object will be lost
As far as I know there won't be any impact , I do not have any doc but you can search in forum

BW Business content activation for BPC 7 NW.

What are the standard business contents needs to be activated for BPC7NW installation in BW?
I means any infoobjects, cubes specific to BPC which can be activated in BW/BI server.
Please let me know any input or links.

Hi Manilyer,
Good question.
This topic is covered in the BPC NetWeaver installation guide that in on the service marketplace.
http://service.sap.com/instguides
The post activation activities are made up primarily of two things.
1) Activation of the delivered BPC Process Chains.
Within the DW Workbench goto the Business Content tab and search for all process chains with the prefix /CPMB/* and activate them all.
2) Activation of ApShell
You can do this by running the program UJS_ACTIVATE_CONTENT. This is not exactly Business Content however somewhat similar. This will create the cubes, infoObjects etc that make up Apshell and load ApShells applications with Data.
Hopefully this is helpful.
Cheers, Scott
Edited by: Scott Cairncross on Jul 30, 2009 1:51 PM

Problem in Business content activation

Similar Messages

Maybe you are looking for