Problem in business object event linkage

Hi all,
When ever a material is created or extended via MM01 i can see business object A00MARA with event created/changed in event trace transaction SWEL but i cannot see the business object 'A00MARA' in business object repository swo1.
please help......
Regards,
N

Tty Trace off and trace on , then create material and check that business object coming again. normally it should never come..

Similar Messages

Business Objects - Events

Please let me know to find the where used list for a business object - event?

There are many events defined for each Business Object. But I find either none or just a few of these events for the business objects defined through the event linkages.
Only events that start a follow on process using a workflow, standard task or an FM or defined in event linkages. Not all entries available will be flagged as active. Some of these could be supplied as standard and you activate them as needed and may involve additional config steps. Some of them might have been active once and deactivated later.
I am assuming that all events for a business object must have been defined for a specific purpose and that they must be getting triggered/created somewhere.
Every object can have certain standard entries like Created, Changed etc. There could be object specific events also. There are standard SAP objects with no events defined at all. You can also extend an object with your own events. How you want to react to an event is specific to your business needs. Also, not all the events defined for an object are triggered/created. You may have to do it yourself with various tools provided by SAP. You can test what events get published for an object by activating event trace and taking the object thorough various stages.
a) Is there a way to get a where-used list for events?
One way is to look at the event linkages (txn SWETYPV) as you have already done. Another way is to txn SWU0 to simulate an event and see how the system would react to that event.
b) Are there some SAP-defined events that never get created?
Answered above.
ANd checkout this link
http://help.sap.com/saphelp_46c/helpdata/en/a5/3ec8534ac011d1894e0000e829fbbd/content.htm
Thanks,

Issue regarding [Work Flow] Business Object Event Raise in ABAP Program

Hi All,
I have one issue regarding [Work Flow] Business Object Event Raise in ABAP Program.
Actual TDS is as below:
If E message type written, raise Business object BUS2005 (Production order) Event PickShortage for production order passing warehouse, transfer request
(BUS2065 Object key) in event container. Also include table of text version of error
messages for this set of Transfer
Request.
Can anybody tell me how can i write it technically in ABAP Code.
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.

Hi,
Can anybody solve above posted issue!
Thanks,
Deep.

Regarding [Work Flow] Business Object Event Raise in ABAP Program

Hi All,
I have one issue regarding [Work Flow] Business Object Event Raise in ABAP Program.
Actual TDS is as below:
If E message type written, raise Business object BUS2005 (Production order) Event PickShortage for production order passing warehouse, transfer request
(BUS2065 Object key) in event container. Also include table of text version of error
messages for this set of Transfer
Request.
Can anybody tell me how can i write it technically in ABAP Code.
Can anybody solve this issue!
Thanks in advance.
Thanks,
Deep.

Hi,
Can anybody solve above posted issue!
Thanks,
Deep.

Access ECC business object event in CRM

Hi Experts,
We have a requirement in which we need to check whether a business object event is triggered in ECC system and access the related business object details in CRM system.
The ECC and CRM systems are already integrated.
Any help on how to access business object events in the other system would be highly appreciated.
Regards,
Saumya

Closing due to lack of replies

How to find the WhereUsed List for a Business Object Event?

How to find the WhereUsed List for a Business Object Event?

Can anybody let me know how to get which
Whereused function will get the data from
different Werks in multi-level?
Any sample program please!!!

TCA Business Object Events: Raise Events Program

Hi,
We are integrating two ebiz instances using SOA and both the instances currently are on 11.5.10. We have back ported patches from ebiz 12i into these instances to use TCA Business Objects functionality(Business Object API's and events). I have a few questions realted to the concurrent program "TCA Business Object Events: Raise Events Program":
1) Do I need to schedule this concurrent program to raise business object events?
2) Is there an alternate way to raise these business object events(any profiles)?
Appreciate if someone can answer these questions.
Thanks,
Sak

Hi,
We use AIA and TCA Business Object Events program to integrate from one Ebiz instance to another.
To achieve what you want I would not do anything in SOA.
In out integration TCA ends up putting messages into WF_BPEL_Q.
I would use the following process: (Assuming offline time is a possibility)
1. Retire the parts of AIA that dequeue from WF_BPEL_Q. (depending on how messages are picked up.)
2. Create a PLSQL script that dequeues all messages from WF_BPEL_Q but dosn't process them. Using relevant select statements you can dequeue by message ID and select only relevant messages
3. Run whatever process you need that puts fires the Raise Events Program
4. Run the script to dequeue the messages that does nothing with them.
5. Re-activate the parts of AIA that dequeue from WF_BPEL_Q
This should give you the desired effect. Just be careful you don't screen out messages that do need to be transfered.
Robert

Problem With Business Object and printing job

Hello,
We are encountering a problem with the application "Business Objects FINANCE", and we would need your help quickly.
In the application , itu2019s impossible to print Consolidated Subsidiaries nor the Securities Held. If we try so, the application freezes and we can't do anything but killing the application via the task manager.
Though, other states can be printed without problem.
We tried on several different PCs, and the problem occured equally on each one.
The version installed is 10.5, and we can do any tests that you think would be useful to diagnose problem.
Our society is AUBAY SA, and our credential to enter in your support website are : S0005386617
In attachment youu2019ll find a screenshot of the event viewer from the server where the application is install.
Thanks in advance for your answer,
best regards.

check the export parameters of the event triggering workflow.
If there is a problem, try instantiating the object in your wf based on the key.
Also check if the wf is able to import the data.
regards,
Sandeep Josyula

Attributes Problem in Business Object

Hi,
We had a requirement of creating a new Business Object with a couple of attributes(both Database and Virtual Attributes)
So, as per the requirement, I created my Business Object with all the required attributes. And I have coded the required Business Logic for my Virtual Attributes.
Now, I created my Business Object's method's using these attributes(OBJECT-ATTRIBUTE_NAME) in my methods wherever required.
Finally, I tested the Business Object in SWO1(Business Object Builder), here are my observations...
1) The Database attributes is getting created properly and I can see the values for the required
2) The Virtual Attributes are getting created as per the Business Logic and I can see the desired result for this also.
3) The methods are giving desired results.
Now, my doubt is, when I trigger one of this Business Object's method from workflow, the attribute values(OBJECT-ATTRIBUTE_VALUE) are not visible inside the method. But if I test the same BO using SWO1, I can see all the Attribute values(OBJECT-KEYFIELDS).
I can only see the KEY FIELDS of the Business Object in Debug mode, I mean, I can view OBJECT-KEY-KEYFIELD value, but not the OBJECT-ATTRIBUTENAME inside the BO'S method in Debug mode-when triggered from Workflow.
Well, I am triggering the Workflow using the SWUD transaction and infact I am creating the required Instances in the first screen of SWUD.
Can anyone make me clear why this is happening?
Regards,
Raja Sekhar

Hi people,
Thanks for immediate reply.
Well, I think I didnt explain my problem clearly...
Well, here is my clear explanation.
I created a new Business Object named ZOBJECT say...
It has 3 key fields...
PERNR(Employee Number),BEGDA(Start Date) and ENDDA(End Date)
It has 2 attributes...
One is a Databsase Attribute - ENAME which gets populated from database PA0001.
Another is a Virtual Attribute - EMAILID which gets populated from some Business Logic.
And it has one Event...ZEVENT
It has one method...
SENDMAIL - Which sends the email to the EMAILID Attribute.So my coding looks something like this...
METHOD SENDMAIL.
DATA : W_FROMEMAIL TYPE PA0105-USRID_LONG,
 W_TOEMAIL TYPE PA0105-USRID_LONG,
 W_SUBJECT(100),
 IT_TEXT TYPE STANDARD TABLE OF SOLI.
W_FROMEMAIL = '[email protected]'.
W_TOEMAIL = OBJECT-EMAILID.
W_SUBJECT = 'Test Mail'.
Populate the mail content into IT_TEXT Internal table
call function 'YHSENDEMAIL'
 EXPORTING
 FROMEMAIL = W_FROMEMAIL
 TOEMAIL = W_TOEMAIL
 SUBJECT = W_SUBJECT
 TABLES
 IT_TEXT = IT_TEXT.
ENDMETHOD.
So as shown above I designed my Business Object.
And I tested this Business Object from SWO1(Business Object Builder) Transaction itself. I am able to get the desired result. Everything seems perfect till now.
Now, I created my workflow with ZOBJECT-ZEVENT as the Start Event.
I created one Standard Task to send EMail which in turn calls up my ZOBJECT-SENDEMAIL Method.
So when I called this method, I found that OBJECT-EMAIL inside the method is not populated, ultimately, no mail is going.
I dont understand why the attribute values are not populated when I call the same method from workflow.
When I checked the workflow log, I can see my attribute values for the ZOBJECT. But in the Method, I cant access the attribute values as such...But I am able to access the Key fields of the method...
Can anybody explain me the reason for this behavior?
I checked the BINDING, Everthing seems perfect from this side...So I dont think it's a binding problem.
Regards,
Raja Sekhar
Message was edited by: Raja Sekhar

Problem with Business object attributes in UWL Workitem description

Hi All,
I have developed a workflow which sends the workitem for two level approvals. Once the workflow is triggered workitem sent to the respective user for approval. When user opens the workitem in inbox he can see all the data which comes from the 'Z' Business object in R/3 and he can approve the same. Everything works fine when this process happens in R/3 system.
The problem comes when user opens this workitem in UWL or this workitem is sent to user mail ID executing 'SWN_SELSEN' report, all the attributes of the business object are displayed in the workitem description except 2 . These are the Minimum annual salary(GRMIN) and Maximum annual salary(GRMAX) fields from 'T510N' table.
Regards,
Vaishali.
Edited by: vaishali rautray on Dec 24, 2008 7:52 AM

Hi Saumya,
Thanks for the quick reply.
For storing the Minimum and maximum annual salary values I have created two attributes in the business object which are referring to database fields. T510N is a customizing table. I could see the values for the same, if I test the Business Object or Trigger the w/f in R/3 and check the approval work item in R/3. These values disappears only in case of web interfacing i.e. If I send the same work item to outlook mail or check it in UWL.
I had checked the same and thought if there is any problem with BO or some other processing takes place before these values are retrieved. But I wonder why this happens only if I process the work item outside R/3 system?
Regards,
Vaishali.

Problem Installing Business Objects XI 3.1 SP2 on AIX 5.3

Hi,
We installed Business Objects XI 3.1 first on AIX 5.3 and everything worked fine.
Once we apply BO XI 3.1 SP2 patch (by running the install.sh script from the
BO XI 3.1 SP2 install bits) onto the Business Objects XI 3.1instance, the following error
[error] Errcode 1: gzip -dc "/apps/truecomp/boXI31-temp/xi31_sp2/pkg/jdk00000.tar.gz" | /bin/tar xvfb - 1
during the installation ( when we checked, the package "jdk00000.tar.gz" contained mostly some libraries
that are already existing under the installed java/bin directory, the error is likely due to tar command can't
overwrite the existing files there), and it seems that the library files in "jdk00000.tar.gz" package are same as
the existing files under java/bin directory. So this error may not matter (just our guess).
The real problem for us after installing BO XI 3.1 SP2 is that, the tomcat log (file name "catalina.out") throws
the following exception and tomcat can't start up, so we can't log onto CMC anymore. Anyone know if this is
a known issue or any solution or workaround? The frustrating thing is that, SP2 can't be uninstalled (
it likely thinks SP2 was not installed successfully), and this whole BO XI 3.1 instance is not usable anymore,
we have to remove the whole thing altogether (no way to remove just SP2 part).
=============Tomcat error log from ""catalina.out" after installing BO XI 3.1 SP2============
New org.apache.struts.action.ActionMapping
10-07-10 17:28:19:306 - session.ManagerBase Thread [main]; IOException while saving persisted sessions: java.io.FileNotFound
Exception: /apps/truecomp/BOXI31/bobje/tomcat/work/Catalina/localhost/BusinessProcessBI/SESSIONS.ser (A file or directory in the path name does not exist.)
java.io.FileNotFoundException: /apps/truecomp/BOXI31/bobje/tomcat/work/Catalina/localhost/BusinessProcessBI/SESSIONS.ser (A file or directory in the path name does not exist.)
 at java.io.FileOutputStream.<init>(FileOutputStream.java:205)
 at java.io.FileOutputStream.<init>(FileOutputStream.java:96)
 at org.apache.catalina.session.StandardManager.doUnload(StandardManager.java:488)
 at org.apache.catalina.session.StandardManager.unload(StandardManager.java:462)
 at org.apache.catalina.session.StandardManager.stop(StandardManager.java:666)
 at org.apache.catalina.core.StandardContext.stop(StandardContext.java:4358)
 at org.apache.catalina.core.ContainerBase.removeChild(ContainerBase.java:892)
 at org.apache.catalina.startup.HostConfig.undeployApps(HostConfig.java:1164)
 at org.apache.catalina.startup.HostConfig.stop(HostConfig.java:1135)
 at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:312)
 at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
 at org.apache.catalina.core.ContainerBase.stop(ContainerBase.java:1054)
 at org.apache.catalina.core.ContainerBase.stop(ContainerBase.java:1066)
 at org.apache.catalina.core.StandardEngine.stop(StandardEngine.java:447)
 at org.apache.catalina.core.StandardService.stop(StandardService.java:512)
 at org.apache.catalina.core.StandardServer.stop(StandardServer.java:743)
 at org.apache.catalina.startup.Catalina.stop(Catalina.java:601)
 at org.apache.catalina.startup.Catalina.start(Catalina.java:576)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
 at java.lang.reflect.Method.invoke(Method.java:618)
 at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:294)
 at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432)
10-07-10 17:28:19:311 - session.ManagerBase Thread [main]; Exception unloading sessions to persistent storage
java.io.FileNotFoundException: /apps/truecomp/BOXI31/bobje/tomcat/work/Catalina/localhost/BusinessProcessBI/SESSIONS.ser (A file or d
irectory in the path name does not exist.)
=============================

Just want to add to the original question that:
the directory (in the error stack from tomcat)
/apps/truecomp/BOXI31/bobje/tomcat/work/Catalina/localhost is NOT even existing on the
AIX server which installed BO XI 3.1 SP2.
Would really appreciate any comments on this problem, especially from SAP support team.
We are really stuck here.
Thanks.

Problem with business object oContacts

Hi,
I have a link button associated with the business object oContacts which should be the object Id 33, but when I click on the link button will open the form of Activities. Is perhaps the wrong object ID?

After opening BP form in beforeaction = true and formload event click on the pane contact persons by code (after click to link button store in some variable true value that will bp opened from link and than click on correct pane and set the varaible back to false).

How do I deal with problems during business object construction?

Hi Everyone.
I'm wondering about best practices for program control flow when business objects can't be constructed properly.
In my servlet I want to create a new Transaction business object based on the parameters of the HttpServletRequest.
transaction = new Transaction( request );The Transaction, in turn, has a Customer business object representing the Customer doing the transaction. The Customer is also constructed based on request parameters. So I have in the Transaction constructor,
public Transaction( HttpServletRequest request ) {
    customer = new Customer( request );
}In the Customer constructor I want to do some validation. For example, I want to check that the requested Customer exists in the database.
If the validation fails, should I throw an exception, which could then eventually be caught by the Servlet which would send back an "Invalid Customer" message to the end user?
But it seems to me like this violates the "never use exceptions for flow control" rule (as described for example at http://onjava.com/pub/a/onjava/2003/11/19/exceptions.html?page=2).
It is a normal function of my application to deny a transaction to a non-valid customer... so it seems like I shouldn't need to bring in the exception handling overhead for this normal business process.
OK, so I guess put "is_valid" flags in the business objects and set them on constructor errors then check them??
public Transaction( HttpServletRequest request ) {
    customer = new Customer( request ); // customer.is_valid flagged false
    if ( !customer.get_is_valid( ) ) {
        this.is_valid = false; // transaction.is_valid is also false now because its Customer is not valid
    } else { // customer is valid
        // finish the rest of the Transaction construction business logic
        // of course this will turn into a mess of deeply nested "else valid" clauses
        // if there are many validation checks...
}...and then in the servlet...
transaction = new Transaction( request );
if ( !transaction.get_is_valid( ) ) {
    // Send back error message to user.
} else {
    // Finally do some business logic. Maybe after another mess of nested "else valid" clauses.
}This gets so hard to read it seems like the throwing Exceptions as part of normal control flow option is preferble.
Is there third option I am missing?
What are your opinions?
Thanks,
Bishop

Build your Transaction and Customer objects based on the data in the request. Then validate the customer, since an invalid customer is "normal" for you.
I'd consider using some sort of factory-like method for creating these objects from the request, since you're tying (sort of) your business stuff to the fact you're currently using a webby (servlet-based) front end...but that's more an aside.
So, in pseudo-ish code:
Transaction t = createTransaction(request);
if (t.validCustomer()) do work;
else return to wherever;This is only a first-pass idea, and other requirements might knock it for six, but it's a startpoint.

Problem with Business Objects Enterprice XI 3.1

Hi dear listers
I have installed Business Objects XI 3.1 in a Windows 2003 Advanced Server, but when I try to open or create a report appear the next message
"HTTP Status 404 - /AnalyticalReporting/WebiView.do
type Status report
message /AnalyticalReporting/WebiView.do
description The requested resource (/AnalyticalReporting/WebiView.do) is not available."
I try to resolve this with the next post in a forum of Business Object
Re: Redeploy war files XI 3.1?
but the error persists
Any idea??
Architecture
- Windows 2003 Advance Server
- Business Objects XI 3.1
- Apache Tomcat 5.5
Thanks in advance

the version you have appear to be XI3.1 RTM, which will not be compatible with Win2012.
You can see what's compatible with what in the PAM (Platfroms Support guide) here :
SAP BusinessObjects Enterprise XI - Supported Platforms
p.s.
please do search before posting.

WebSphere Portal 6.1 SSO problem with Business Objects Release 3 server.

Have anybody successfully integrated SSO between WebSphere Portal 6.1 BO portlet with Business Object release 3 server ?? If so please help. I have followed the steps in BO documentation (Portal Integration Kit for WebSphere) but when I logged on to portal I get the following error message
Auto signon to the BusinessObjects Enterprise infrastructure at hostname failed. Contact your reporting administrator for assistance." message

Anybody still looking for a solution following the below guides.
http://help.sap.com/businessobject/product_guides/boexir31SP3/en/xi31_sp3_pik_adminportlet_en.pdf
Replace secEnterprise with secLDAP in below guide for LDAP Automatic Sign
http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_pik_deploy_ibm_en.pdf

Problem in business object event linkage

Similar Messages

Maybe you are looking for