Problem In Business Partner Creation

Hi to all,
            I have around 900 BP in BP master  which i export from another company. Now i try to create a new BP it gives error that
'This entry already exists in the following tales business master  OCRD message (131-183).I checked in database as well as in Business Master form but i did'nt found any BP.
Regards

Dear  Mr Krishna
The issue is related to corruption in database. So for this you had to log a message on SAP Channel Partner portal.
Also please donot run Restore on the production databse with the approval of SAP Support.
Please check Note no 752031 in this regard.
Regards
Vikas Rastogi
Edited by: Vikas Rastogi on Aug 22, 2008 8:20 PM
Edited by: Vikas Rastogi on Aug 22, 2008 8:20 PM

Similar Messages

  • Problem in business partner creation in GTS

    Hi experts,
                 To create business partner in GTS I have used BAPI_BUPA_CREATE_FROM_DATA. It is creating business partner but it is not updating the table u2018 /SALSLL/ADRCONu2019  which is necessary for SPL check in GTS. Is there any functional module / RFC specific to GTS which will create a business partner as well update the u2018 /SALSLL/ADRCONu2019  table?
               I also tried to create a custom RFC by recording the transaction FS00001 in GTS(sap netweaver 2004s) for the same purpose. This RFC is working fine in GTS system ( without RFC call) but while calling this RFC from another R/3 system(4.6C) it is giving the error u2018Control Framework : Fetal Error u2013 GUI cannot be reachedu2019 . Any solution or workaround for this issue?
    with regards,
    S.Janagar

    Hi
    Can you kindly suggest the SAP note number please. Even we ar efacing porblem to transfer ECC BP's to GTS.
    we are creating BP's in CRM and replicating them in ECC and wish to transfer these to GTS for SPl screening - this is the sceranio. Would be glad if you can suggest on how to achieve this.
    Thanks
    Rajan

  • Display Org Unit based on User logon in Business partner creation..

    Hi Gurus,.
    I have to assign Sales Org , DIV, Distribution Channel to the Business Partner in Sales Area data.  When I try system shows entire Org structure. But I want the Org structure should be displayed based on the user log on. Assume that, I am assigned to Shangai and creating Business partner for Shangai, the system should not show Beijing or other Org Unit since I belong to Shangai.  How to address this scenario thro standard customization?
    Is it common problem in CRM Webui(6.0 and 7.0).
    My Org Structure:
    Global
      China
         Shangai
         Beijing
       Nanjing.
    Thanks in Advance....

    Hi Varma,
    From my understanding of your problem, you can approach it in a different manner. Since, you mentioned that you will be receiving a delimited flat file around 5 to 6 times a day, you can probably consider coming up with a Report Program. This Report will consume the flat file, generate the necessary organizations, business partners, BP relationships and then create them and finish with the logging of all the messages ( Success, Error, Warnings, etc.)
    You can now schedule this report execution in a Batch Processing Job which will be executed as per the scheduled time and at the end of the day you can see all the application log files.
    This is just an approach and you can modify the report in your own way. I guess that the flat file will be located somewhere in the same place daily so that you can hard code the File Name and Path in the report.
    Regarding the Organization and Business Partner creation, you can use the standard SAP delivered BAPI's which will return you all the errors properly.
    Hope this helps.
    Thanks,
    Samantak.

  • Business Partner creation for Customer Master creation

    Hi
    We have customized our system in order to trigger the creation of Business Partner whenever a Customer Master is created.
    I created some customers for which the Business Partner creation was not triggered due to some reason.. In order to manage the same, i created a Business Partner manually and tried to link the same to my customer through T Code FLBPD2, but system returned with a message "The business partner could not be linked to the customer selected"  Message Number CVIC_UI023.
    Can anyone suggest something.
    Thanx in advance
    Pankaj

    Hi Pankaj,
    Please check wether you configured all required node under Master Data Synchronization..In SPRO..I am referring to below node.
    Active Synchroniztion Options
    Set BP role Category for customer Integration
    Define BP Role for direction customer to BP
    Field Assignment for customer Integration
    Thanks
    Veman.

  • Need Enhancement spot in Business Partner Creation/Change

    Hi all ,
    In Business partner creation/Change screen(Tcode BP),if pressing BACK or CANCEL button without saving data, it will ask for confirmation that Want to save data or not.If we press YES it will save the data,or if we press  NO it won't. Is there any Enhancement spot (User exit or BADi) available after triggering the above confirmation message.If so kindly intimate me the Exit name or BADi name.
    Thanks in Advance..

    Try using Implicit Enhancements .
    I have got implicit enhancements over here for you.
    check out if Useful while dubugging.
    include :LBUS_LOCATORF05
    screen 3000
    prog SAPLBUS_LOCATOR
    form dynpro_pai_begin
    dynpro_pai_end
    create IMPLICIT enhancements here.
    To avoid confusion write your code after IF condition checking for
    GV_OK_CODE which is BUS_MAIN_BACK and dynpro number.
    If you dont know Implicit enhancements try this link
    http://www.sapdev.co.uk/enhance/eframework/eframeworkhome.htm
    checking ok_code is necessay otherwise it will be executed everytime PAIis triggered.

  • Very urgent: Doubts regarding CRM WORKFLOW OF BUSINESS PARTNER CREATION

    HI ,
    I HAVE DOUBTS REGARDING CRM WORKFLOW OF BUSINESS PARTNER CREATION, WHILE I AM CREATING BUSINESS PARTNER THROUGH R/3 , IT REFLECT IT INTO MYSAP CRM ALSO, AT THAT TIME IT SENDING THE MAIL TWICE TO THE RECEIPIENT. IS THERE ANY WAY THROUGH  WHICH I CAN RESTRICT IT TO SEND THE MAIL ONLY ONCE,
    PLZ SEND ME THE REPLY AS SOON AS POSSIBLE,
    THANKS  ADVANCED,

    HI
    WORKFLOW SEETING. SAP MAIL
    MULTIPLE MAILS AND
    ONLY ONCE CHOOSE
    ONLY ONCE OPTION ON WHICH VERSION U R WORKING?
    REWARD IF HELPFUL
    VENKAT

  • FSCM-COL Business Partner Creation for Existing Customers

    Experts-
    After using MDS_LOAD_COCKPIT to create the initial load of Business Partners, there are a few Customers which are still missing Business Partners. Automatic Creation of Business Partners is set up and fully functioning for any new Customers created, however when attempting to use MDS_LOAD_COCKPIT for the existing Customers which are missing Business Partners the error message 'No transfer of interval for object BU_PARTNER' (Message no. NR028) is received.
    If the Automatic Creation of Business Partners is working correctly at the time of Customer Master creation, what would prevent the Business Partner from being created after the Customer already exists?
    Please let me know if further clarification is needed on what is outlined above.
    Thanks and Regards,
    Corey

    In case someone runs into a similar issue in the future, the resolution to this issue is provided below:
    In the case I've highlighted the customer had been created, yet the Business Partner failed to be created in the Automatic Business Partner Creation functionality initially due to a missed Tax Number Category configuration. Once this configuration was complete the BP still failed to create via XD02 or MDS_LOAD_COCKPIT. MDS_PPO2 gave the initial error message as 'Business partner ##1 does not exist' (Message no. R1201).
    Although the Customer to BP synchronization setting were set up for an external number range, the presence of contact persons in the Customer Master record were causing SAP to look for grouping data. Since no grouping data was present SAP was attempting to create BPs contact persons using the internal number range, which was already set at its limit.
    By removing the contact persons from the customer master via XD02 and then re-executing the MDS_LOAD_COCKPIT, the requested Business Partner was created. After that the contact persons were then re-maintained in the customer master.

  • Business Partner creation - Sales Area Data retrieves blank divisions

    During business partner creation, the sales area data assignment block will retrieve a list of all relevant sales organizations, distribution channels, and divisions that are replicated from ECC. This is working fine. However, it also adds to this list with the sales organizations, distribution channels, and blank divisions. Blank divisions do not exist in either ECC or CRM. It appears to be using the dummy division settings, but I have attempted to configure with the indicator "CRM Header Div. Active" as both active and inactive, to no effect. The only time I have been able to condense this list into a single line has been when I actually activated dummy divisions -- to which CRM would now retrieve only sales organizations, distribution channels, and blank divisions. This is not an ideal solution either.
    How do I get the system to remove the blank divisions from being displayed? It is very confusing to the users, not to mention polluting the screen.
    Example (both are being displayed, I only want the one with an actual value to be displayed):
    Sales Org = 1000, Dist Chan = 10, Division = blank
    Sales Org = 1000, Dist Chan = 10, Division = 10

    any insight woudl be much appreciated. thanks.

  • Business Partner Creation ( Master Tenant with Customer Account)

    Hello Experts
    Am trying to create a master tenant with a customer account, but as i save the business partner there is no corresponding creation of the master tenant with a customer account in the company code. The system only generates a business partner created. I have cheked the settings on business partner customer and have the correct FI custmer acount to the business partner, have also checked settings on the assignment of the reconciliation account to the BP and again it is compatible with the customer reconciliation account in Financials. I have also the synchronization data to see whether the synchronization object is activated, and it was not activated and i activated it, but still am not able to create a master tenant with customer account.
    Please Experts help me on this am very very  stranded
    Regards
    David Mavi

    Hi David,
                  Following activities are to be done to create customer simultaneously while the creation of business partner.
    Business Partner Number Range: IMG>Flexible Real Estate Management (RE-FX)>Business Partner>Relevant Settings for Business Partner in RE Context>Number Range>Business Partner Number Range
    Define Grouping and number range: IMG>Flexible Real Estate Management (RE-FX)>Business Partner>Relevant Settings for Business Partner in RE Context>Number Range>Define Groupings and Assign Number Ranges
    Also make sure that the customer account group is created with a number range which should be external. The number range for the business partner should be internal.           
    Master Data syncronization: IMG>Cross Application Components>Master Data Synchronization>Customer/Vendor Integration>Business Partner Settings>Settings for Customer Integration>Field Assignment for Customer Integration>Assign Keys>Define Number Assignment for Direction of BP to Customer
    In the settings select the same number range only if the number ranges for the customer account group and BP groups are the same.
    If u have done all these things and still the customer is not getting created then there might be a problem of the mandatory fields. i.e may be in customer account group some fields are mandatory which are not getting copied from the BP. So make all the fields in the customer account group as optional. and try to create new BP again.
    Regards,
    Deepak M

  • Restrict Org details based on the User in Business partner creation..

    Hi Gurus,.
    I have to assign Sales Org , DIV, Distribution Channel to the Business Partner in Sales Area data.  When I try system shows entire Org structure. But I want the Org structure should be displayed based on the user log on. Assume that, I am assigned to Shangai and creating Business partner for Shangai, the system should not show Beijing or other Org Unit since I belong to Shangai.  How to address this scenario thro standard customization?
    Is it common problem in CRM Webui(6.0 and 7.0).
    My Org Structure:
    Global
      China
         Shangai
         Beijing
       Nanjing.
    Thanks in Advance....

    Hi Denis,
       Thanks for your reply. I believe Org determination rule is applicable for Transaction types not for Account Creation. I want to get Sales area data based on login user. It shows complete Sales Area(Sales Org IDDistribution ChannelDivision) when I create an Account.. Assume that you are an employee and assigned to Newyork, when you create New Customer in Newyork, system should not show Boston, Washington Sales areas...Please throw some light on this...
    Thanks in Advance.,

  • Business Partner creation in CRM/SRM with ID Management

    Hi,
    I have tried to find info about Business partner management with IDM to CRM/SRM...
    Customer would have two use cases.. Internal and External users...
    Internal use case is quite straight forward in IDM documentation.. I have two questions about this,,,
    1. ALE connection from HCM to CRM/SRM to create BPs to internal users... is there anywhere documentation how to configure this ALE connection?
    2. Is after SU01 user is created - Linking to BP automatical when using Business Suite connector ?
    External use case. Customer would like to implement scenario, where BP is created either:
    1. on CRM/SRM and IDM user would be created... and after approving new IDM user SU01 user with roles would be created nd BP linking would happen...
    2. on IDM user is created - BP and SU01 user would be created on CRM side... and linking between them..
    On external use case I have understood- that first one is possible without stronger customization and ABAP programming?
    --- first one requires VDS and SPML ID store on IDM side
    And something to send Newly created BP from CRM to IDM with SPML
    or does IDM check regularry with SPML CRM for newly created BPs??
    Does anyone know how actually this is happening?
    And is there any special configuration needed on CRM side? or some transaction to run after BP creation?
    IDM version 7.1 SP5
    Ystävällisin terveisin / Kind Regards
    Veli-Matti Luotonen

    Hi,
    Check whether the BP roles have been defined in the system.
    Go to  Customizing:
    Cross-Application Components -> SAP Business Partner -> Business Partner -> Basic Settings -> Define BP Roles
    Here you can define BP Roles and BP Categories.
    Make sure the appropriate category is assigned to the BP role that you are trying to create. For this select the BP role and click on the "details" button.
    Also read the documentation provided here.
    Regards,
    Reema.
    PS. Reward appropriate points to useful answers.

  • Problem with Business partner flow from R/3  to CRM

    Hi,
    We are setting up a process to flow of Business Partners from R/3 to CRM. 
    We have configured PIDE correctly but the problem is when I am creating any customer in R/3 we are getting DUMP.  
    Kindly help me in this regards.
    Thanks

    Hi,
    Check out the following Middleware Configuration :
         <b>CRM Middleware configurations</b>     
    1.     Source client for Client copy
         Using t-code SCC3 in both CRM and ISU to get the source client used for client copy.      Get source client for profile SAP_ALL.
    2.     RFC Destinations
         Use t-code SM59 and check if the following RFC destinations have been created:
    •     CRM
    o     R/3 Destination for CRM e.g. CRTCLNT240
    o     R/3 Destination for ISU e.g. ISTCLNT240
    o     Logical Destination for Middleware R&R queues – one for current client and one for client 000.                                                                            e.g. SAPCRM_MW_RR_240, SAPCRM_MW_RR_000     
    o     TCP/IP Destination for IPC dispatcher e.g. IPC_RFC_DISPATCHER
    o     TCP/IP Destination for IPC server e.g. IPC_RFC_SERVER
    •     ISU
    o     R/3 Destination for CRM e.g. CRTCLNT240
    o     R/3 Destination for ISU e.g. ISTCLNT240
    3.     Logical Systems
         Using t-code SALE check if the following logical systems have been created:
    •     CRM
    o     Own logical system – e.g. CRTCLNT240
    o     Logical system for ISU – e.g. ISTCLNT240
    o     Logical system for source client used in client copy – e.g. CRTCLNT200
    •     ISU
    o     Own logical system – e.g. ISTCLNT240
    o     Logical system for CRM – e.g. CRTCLNT240
    o     Logical system for source client used in client copy – e.g. ISTCLNT200
         Check if own logical system is assigned to the client.
         Path: Sending and Receiving systems -> Logical Systems -> Assign Client to Logical      System.
         Convert Logical System name in application tables
         Use t-code BDLS to convert logical system names in the application system.     
    1.     Enter old logical system name retrieved in step 1. e.g. CRTCLNT200
    2.     Enter new logical system name e.g. CRTCLNT240.
    3.     Select radio button Conversion of Client-Dependent Tables and execute the transaction.
    This process needs to be carried out 4 times: twice in CRM and twice in ISU.
    •     CRM
    o     Old CRM logical system -> New CRM logical system. e.g. CRTCLNT200 -> CRTCLNT240.
    o     Old ISU logical system -> New ISU logical system. e.g. ISTCLNT200 -> ISTCLNT240.
    •     ISU
    o     Old CRM logical system -> New CRM logical system. e.g. CRTCLNT200 -> CRTCLNT240.
    o     Old ISU logical system -> New ISU logical system. e.g. ISTCLNT200 -> ISTCLNT240.
    4.     Middleware Parameter tables
         Use t-code SM30 to maintain middleware parameters in following tables
    •     CRM
    o     Table SMOFPARSFA:
         Change value for following parameter entry:
         Key - R3A_COMMON
         Para name - CRM_DEFAULT_DESTINATION
         Value - Old ISU logical system -> new ISU logical system
              E.g. ISTCLNT200 -> ISTCLNT240     
    •     ISU
    o     Table CRMRFCPAR:
         Delete the previous entry for the following key:
         User - CRM
         Object name - *
         RFC Destination - Old RFC destination for CRM e.g. CRTCLNT200.
         Load types - All Load Types
         Create new entry with following data:
         User - CRM
         Object name - *
         RFC Destination - New RFC destination for CRM e.g. CRTCLNT240.
         Load types - All Load Types
         In Queue flag - X
         Send XML – No XML
    o     Table CRMPAROLTP:
         Change value for following parameter entry:
         Para name - CRM_DEFAULT_DESTINATION
         User - CRM
         Value - Old CRM logical system -> new CRM logical system
              E.g. CRTCLNT200 -> CRTCLNT240
    5.     Admin Console (Sites and subscriptions)
         Using t-code SMOEAC in CRM change attributes for the following sites.
    •     CRM site
    o     Name: Change name from old CRM logical system -> new CRM logical system e.g. CRTCLNT200 -> CRTCLNT240
    o     Description: Change description from old CRM logical system -> new CRM logical system e.g. CRTCLNT200 -> CRTCLNT240
    o     Site attributes: Change RFC destination from old CRM RFC destination to new CRM RFC destination e.g. CRTCLNT200 -> CRTCLNT240
    o     Click on get values button to refresh logical system details.
    •     ISU site
    o     Name: Change name from old ISU logical system -> new ISU logical system e.g. ISTCLNT200 -> ISTCLNT240
    o     Description: Change description from old ISU logical system -> new ISU logical system e.g. ISTCLNT200 -> ISTCLNT240
    o     Site attributes: Change RFC destination from old ISU RFC destination to new ISU RFC destination e.g. ISTCLNT200 -> ISTCLNT240
    o     Click on get values button to refresh logical system details.
         Check if ISU site is assigned to following subscriptions.          
    •     All Business Agreements (MESG)
    •     All Business Partner Relationship (MESG)
    •     All Business Partners (MESG)
    •     All Business Transactions
    •     IS-U Connection Objects (MESG)
    •     IS-U Contracts (MESG)
    •     IS-U Points of Delivery (MESG)
    •     Product Materials (MESG)
    6.     CRM Middleware Queues
         Inbound Queues:
    I.     Execute transaction SMQR.
    II.     Change AS group from ‘DEFAULT’ to ‘parallel generators’.                Path: Edit -> Change AS Group
    III.     Register following queues:
    •     CRM     
    o     CSA*
    o     R3A*
    •     ISU
    o     R3A*     
    Outbound Queues:
    I.     Execute transaction SMQS.
    II.     Change AS group from ‘DEFAULT’ to ‘parallel generators’.                Path: Edit -> Change AS Group
    III.     Register following queues:
    •     CRM     
    o     CSA*
    o     R3A*
    •     ISU
    o     R3A*     
    R&R Queues:
    I.     Execute transaction SMOHQUEUE in CRM.
    II.     Check if all queues have status ‘Released’.
    III.     Start Queue Demon by clicking on ‘Start Queue Demon’.
    <b>Please reward points if it helps.</b>
    Regards,
    Amit Mishra

  • Problem with Business Partner List - State

    I'm using SAP B1 2007A. We recently added several International countries and their regions (states). We are having a problem with the state that appears on the Business Partner List (list that appears when you search using part of a company name or *). The query that gets the data does not take into consideration the Country where the state is located. The result is that the query returns the first state it finds based on the state code not the state associated with the country.
    Is there a fix for this query or is there a way I can adjust the query to get the correct state results in the Business Partner List.
    Thanks,
    Mark

    No. Different state name but same state code.
    Ex:
    GA - Georgia in USA
    GA - Galapagos Islands in Galapagos Islands
    When searching for the Business Partner the city is Atlanta the Country is USA but the State is Galapagos Islands not Georgia.

  • Business partner creation error

    Hi Gurus,
    1) We don't have pre-configured standard settings for FICAx (for ex standard contract categories, document types, number ranges, main and sub-transactions) in our system. Can anyone tell me how to load the pre-configured settings in SAP.
    2) In BP creation after entering all the BP fields, if I try to save the data it says the BP has been created but gives a dump. We were not able to find that BP when we try to look up. I am not sure if it is a configuration issue or is it due to improper loading of FI-CA.
    3) We have the same issue with contract account creation CAA1, CAA2, or CAA3. When we try to access transaction it gives dump.
    The current ABAP program "SAPLBUSS" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "SAPLFSP35 " in include
    "LFSP35TOP " in
    line 36:
    "Missing length check at runtime"
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "SAPLBUSS" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Please advise and points will be awarded for all useful solutions.
    Thanks
    Santosh
    Edited by: Santosh Kolleti on Dec 15, 2008 6:39 PM

    Hi Mahesh,
    Thanks for the info, i did check the validity in the Business Partner and it is coming correctly for the one which are created.
    Issue i am facing is while creation of business partner, is the any field in customer master which govern the validity of Business Partner while creation.
    Thanks & Regards,
    Ravi

  • Business Partner Creation in cProjects 4.0

    Hi All,
    I m not able to create Business Partner in the system Once I get to the 'BP' transaction, and click on Create Person. Thereafter, I enter an id in the 'Business Partner' field. I pick 'Business Partner (gen) from the 'Create in BP Role' drop down. Thereafter, I enter the email id. On clicking save, I get the message 'No BP roles exist with BP Role category MKK'.
    Just not able to decipher where the problem lies. Please suggest how exactly to create a BP at the back-end. Please enlist the required steps. What all fields do I need to definitely enter and so on.
    Thanks so much.

    Hi,
    Check whether the BP roles have been defined in the system.
    Go to  Customizing:
    Cross-Application Components -> SAP Business Partner -> Business Partner -> Basic Settings -> Define BP Roles
    Here you can define BP Roles and BP Categories.
    Make sure the appropriate category is assigned to the BP role that you are trying to create. For this select the BP role and click on the "details" button.
    Also read the documentation provided here.
    Regards,
    Reema.
    PS. Reward appropriate points to useful answers.

Maybe you are looking for