Problem in calling BLT from external system as Web Service

Hi All,
I have written a BLT, which basically does some functionality with certain input and gives out some output. Stored the transaction and taken the WSDL from ../WSDLGen/..../TransactionName
Then using that WSDL in external application (3rd party tool basically does web services call) calling the BLT with the required input.
BLT also called and sends out the output as expected to external application.
But the weird happening here, some times it calls some time it not.
Alternatively calls some times. Goes in to fault.
Its not working for sequential calls.why is it? Do i need to clear any thing?
while calling I ahve to close Business Logic Editor? I have done all the things still works occasionally.
Thanks in advance,
Murugappan.

Murugappan,
Now the version should be 11.5.3 which is available on the  <a href="http://service.sap.com">SAP Service Marketplace</a>.  The URL call should be: http://<ServerName>/Lighthammer/WSDLGen/<Path To Transaction>/<TransactionName>.  The output transaction property has to be of type String, but the string can be XML data.  Please post what the results of your efforts are.
-Sam

Similar Messages

  • How to call RFC from external System to get HR Data

    According to the requirement the "HR" Workflow has to be able to view the employee details from external system Using the standard Microsoft connectors.
    So, my job is to create an RFC where i need to fetch the HR data from the infotypes P0001 and P0002. And they will call this RFC by requesting employees surname, ID number and/or Employee number.
    Do i need to simply write OPEN SQL statements in RFC or
    do i need to call any BAPI's?
    Setting up RFC's(Creation of Destinations) is not our job.
    Someone Please help me in this regard with some valuable input. Thanks in Advance.
    Ram.

    Hi Ram,
    to get the information from HR sytem you could call the BAPI
    BAPI_EMPLOYEE_GETDATA
    Regards
    Bernd

  • Calling FM in external system from XSLT

    Hi,
    I know that in XSLT interpreter provided by SAP supports calling function modules.
    I need to call FM in external system from XSLT in message mapping and its result insert into one of element result XML message.
    Do you think it is possible ?
    If so is available any documentation for that.
    Any help is appreciated.
    Thank you.
    Marian Morzol

    Hi Vijaya,
    this is very helpfull document for me. However I need some other explanation.
    Does it meen that I need to write "Helper java class" ( e.g. in text editor - Notepad) and deploy the source to to Entegration Engine directory or an Adapter Directory ( maybe using Visual Administrator).
    It is not clear for me.
    I have XI 3.0 running on Windows 2003 Professional so to copy some files to some folders should not be a problem but I need an exact guide what I have to do.
    Thank you.
    Marian

  • Create activity from external system

    Hi
    What is meant by creating activity from external system.
    I need to work on an enhancement which deals with function module to create activity that can be called from external systems e.g. on demand.
    I am not sure what does that exactly mean?
    Any pointers would be helpful.
    Thanks
    Alka

    Hi guys,
    Thanks for your answers... But is it possible to call transaction NOTIF_CREATE from an external system?
    I have done something already so that those 3 fields will be automatically populated for a message sent from an external system.
    I changed the screen and called FM BAPI_NOTIFICATION_CREATE(a remote enabled FM which is the one being used by transaction NOTIF_CREATE to create a message) inside FM BCOS_SEND_MSG.
    I populated the category, subject and solution in the FM export parameters as well as the solution number in the sap data table. I put a destination also..
    This FM calls another FM DNO_OW_CREATE_NOTIFICATION which is the one being used from the external system but do not cater the functionality to send the 3 fields that we need.
    As you will notice, there are lots of standard objects that I've changed. =)
    My problem now is that the system data sent is the same with the system data if you create the message using NOTIF_CREATE. Some system that were sent when a message is sent from an external system is missing but at least the sap system and client ID is sent. There is no external reference number also. But hopefullly, the users will accept it. Can't find any other solution to this.
    Thanks,
    Eric

  • 'Accept IDOC' from external system

    Hi Experts,  I am new to IDOCS. I have to update one already written function module to accept IDOC in SAP from external system. In the function module I see some IMPORT parameters like 'input_method' and 'mass_processing' and EXPORT parameters like 'workflow_result' , 'application_variable' , 'in_update_task', 'call_transaction_done' . Can someone tell me what are these parameters for ???.

    input _method for method of data records update
    Mass_processing for handling the large number of Idocs in single take
    Workflow_result for hitting the results at last
    'in_update_task' update the records in update mode
    call_transaction_done' by using call transaction method it would post the records

  • Ho w to schedule a scenario from external system

    Hi
    Is ther any API or function we can schedule the ODI scenario from external system.We have a html page from whcih we are calling ODI scenario using startscen command.We would like schedule the scenario
    from HTML page is there any way we can achive this
    Thanks in advance...
    Baji

    What Zerome said is correct. Odi console is for managing and monitoring an Oracle Data Integrator run-time architecture and for browsing design-time objects.
    you can refer for information on this link aswell.
    http://docs.oracle.com/cd/E17904_01/integrate.1111/e12643/odi_console.htm
    Bhabani
    http://dwteam.in

  • How to send delivery document from external system to ECC

    i have a business requirement to send a delivery and billing documents from external system ( MS access )  to ECC
    could any one light me how to do this ???
    Thank you in advance

    Hi Ahmed,
    Talk to your middleware team, They will upload the data through RFC.
    Basiclly RFC(Remote function call) works like it will call the function module and then upload the data.
    For more information, check the link given below.
    http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5b6a85b11d6b28500508b5d5211/content.htm
    Hope this helps,
    Regards,
    MT

  • IDOC from external system

    Hi,
    I have scenarion in that we will receive IDOC from external system (SAP system) in XI i.e. IDOC- XI -IDOC scenrio. from my Understanding ,to configure the scenario I have to do ALE from sender side and IDOC receiver channel in receiving side.
    External system (SAP) -(ALE)-> XI -(IDOC rcv)--> Our System (SAP)
    Please can anyone provide me steps to do ALE from external system.
    Edited by: tapan singh on Feb 28, 2011 11:51 AM
    Edited by: tapan singh on Feb 28, 2011 11:52 AM

    Hi,
    We can have alternate ways to send IDocs from external system to SAP system. One way is in below link
    http://help.sap.com/saphelp_46b/helpdata/en/52/16abf6543311d1891c0000e8322f96/content.htm.
    http://help.sap.com/saphelp_40b/helpdata/ru/52/16abcf543311d1891c0000e8322f96/content.htm
    I can think of few more, like In external system after generating Idoc, save it as a tex and send it to SAP system using Http post or using web service.
    Look out to below discussion.
    Send IDoc from External System to SAP system
    Regards
    Aashish Sinha
    Edited by: Aashish Sinha on Feb 28, 2011 1:16 PM

  • Problem in calling BRI from PRI

    Hi,
    I am having problem in calling BRI from PRI. I am getting below message while debugging. Also note that calling from BRI to PRI is successful.
    Mar 2 23:38:22: ISDN BR0/0 Q931: RX <- SETUP pd = 8 callref = 0x04
    Sending Complete
    Bearer Capability i = 0x8890
    Standard = CCITT
    Transer Capability = Unrestricted Digital
    Transfer Mode = Circuit
    Transfer Rate = 64 kbit/s
    Channel ID i = 0x89
    Progress Ind i = 0x8281 - Call not end-to-end ISDN, may have in-band info
    Calling Party Number i = 0x2183, '1726601501'
    Plan:ISDN, Type:National
    *Mar 2 23:38:22: ISDN BR0/0:1: Incoming call rejected, unbindable
    *Mar 2 23:38:22: ISDN BR0/0 **ERROR**: host_incoming_call: DIALER ERROR 0x1: b channel 0, call id 0x15E
    *Mar 2 23:38:22: ISDN BR0/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x84
    Cause i = 0x8095 - Call rejected
    Pls help me.
    Anis
    9229109694

    Dear Dharmesh,
    Can u pls explain where to enable PPP Multilink.
    Dear p.bevilacqua ,
    I did what u told (configure "ppp chap username" under dialer interface), but the problem is same.
    Anis

  • Send IDoc from External System to SAP system

    Hi Folks,
        I have a requirement to send IDocs from an external system to the SAp system. Basically the external system is a subsystem which is able to send & receive idocs. The external system is currently able to send idocs to SAP system through the ALE layer but now we have to replace it by PI. Now the external system has to send teh IDocs to the SAP ECC system through the SAP PI 7.0.
       Kindly let me knowq how I can achieve it.
    Regards,
      Santosh

    Hi Satish,
    You can achieve this requirement
    1)If your external system going to support web service cals then send IDoc from External system as a web service, in PI use sender side SOAP and receiver side IDoc receiver channel  to  send IDoc.
    or
    2)Use proxy program ,implement the same ALE logic in PI.
      or
    3)Copy the Extenal IDoc message in to file folder as XML,then use file adapter to pick up this message and send it SAP using IDoc.
    Regards,
    raj

  • Example-- Call RFC from external Java Application

    Update: I need code example to call RFC from External Java application. Can onybody help me?                                                      
    RGDS
    RP
    hi all.
    i want to create my own log for each interface.
    i saw this blog:
    /people/michal.krawczyk2/blog/2006/09/20/xi-abap-mapping-logs--more-standard-better-visibility
    my doubt is how to catch the error that i see in SXI_MONITOR y put it in a Sub-Objetc.
    For example: in sxi_monitor i get the error for my interface NMUCustomer: "No receiver could not be found" or "Error Mapping Traformation".
    I created an Object called ZNMUCUSTOMER and a Sub-Objetc called ZERROR.
    what i must do to get the error I see in monitor and assign it to Sub-Object??
    Rgds.
    Message was edited by:
            Rodrigo Pertierra
    Message was edited by:
            Rodrigo Pertierra
    Message was edited by:
            Rodrigo Pertierra

    Hi,
    Oh, you are using ABAP mapping ......
    then use the following in ABAP mapping ..
    TRACE1,TRACE2,TRACE3.... for trace level 1,2,3......
    http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/866ce290-0201-0010-338f-b8c3553aaa0f
    Regards
    Chilla

  • Updating purchasing contracts in SRM from external system ( XI )

    Hello friends,
    We have a requirement to update / create purchasing contracts in SRM from external system ie e-sorcing . We are getting the structure of contract from
    xi proxy.
    We are using function modules
    BBP_PD_CTR_CREATE
    BBP_PD_CTR_UPDATE
    to create / update contracts.
    The issue is , how we will come to know an existing contract is got updated in
    the external system and , is there any function module/ bapi available to get those
    updated contract records or is there any way to do this.
    It would be great if anybody can provide some helpful information.
    Thanks..
    Jayaram

    Hello BABA,
    Try this link. Hope this helps.
    [Re: Creating SRM PO with Smartforms BBP_PO;
    Please discuss this issues in SRM- General forum for better replies.
    Cheers,
    Suvendu

  • Options to extract from external system

    Hi,
    What are all the possible options (DB connect, UD connect...) are there in BW to extract data from external system in BW and under which circumstances which one to use.
    Thanks,
    sam

    Hi Sam,
    Some information about DB Connect.
    DB Connect allows you to have extra database connections besides the default connection for SAP.
    You use these connections to access databases and transfer data into a BI system.
    In general, BI application servers can only be supported for DB Connect on operating system versions where a SAP Database Shared Library (DBSL) has been released for the BI database and the source database.
    Please see this link below
    <a href="http://help.sap.com/saphelp_nw70/helpdata/en/a1/89786c3df35c4ea930a994e884bb4c/frameset.htm">http://help.sap.com/saphelp_nw70/helpdata/en/a1/89786c3df35c4ea930a994e884bb4c/frameset.htm</a>
    Hope this helps
    Regards
    Sudeepti

  • BCS - Message from External System : 'Login failed for user 'NT AUTHORITY\IUSR'.'.

    Hello,
     I have create a an external content type .
     I Choose "Connect with user's Identity".
     I create a external list that uses the ExternalContentType.
     When I try open the external list from browser by User "TestUser" . I get the following error "Message from External System : 'Login failed for user 'NT AUTHORITY\IUSR'.'"
       My Question :
           I need to know why pass the credential "NT AUTHORITY\IUSR" to connect to the data base not the
            current log in"TestUser" ?  How Can I solve it ?
            Thanks
             Hema
    ASk

    Hi,
    did you configure Kerberos delegation?
    NTLM fails when you try to open external list from client computer, because SharePoint cannot pass user's identity - "Double Hop" issue.
    Take a look at confguring Kerberos for SharePoint 2010 white paper
    Download Configuring Kerberos Authentication for Microsoft SharePoint 2010 Products from Official Microsoft Download Center
    http://www.microsoft.com/en-us/download/details.aspx?id=23176
    Robi MCT Kompas Xnet d.o.o. Ljubljana | blog: http://xblogs.kompas-xnet.si | website: http://www.kompas-xnet.si
    Slovenia
    Please vote if you find reply useful or mark it as answer.
    Thank you

  • Modify PO from external system

    Hi all,
    We are implementing SRM 5.0 with extended classi scenario.
    Until now we have a R3 system where we create PO, but we also have got a functionality for modifing particular information of PO in a lagacy system, that comunicate with R3 between idoc.
    Now we migrate the lifecycle of PO in SRM, but the legacy system remains.
    Wich is the best way for modify a PO from a legacy system in SRM?
    thanks
    enzo

    Hi,
    You can try multiple methods ( mostly non-standard), one is use the SRM function modules to update PO, when you send the data from external system, other method is PO response( send the changes from external system as PO response in SRM).
    Hope above methods will resolve your issue.
    Thank you
    Sreedhar Vetcha

Maybe you are looking for