Problem in Calling Subscreens

Hi,
my main screen number is 1001 and in that screen i have a tabstrip with subscreens 1002,1003,1004,1005,1006.Each tab has an ALV...
When i click on excute button in my main screen 1001 then i need to call all the subscreens and all the ALV's should be displayed.
My coding...
Module user-command 1001.
Case Sy-ucomm.
When 'EXCE'.
CALL SUBSCREEN TAB_SCA INCLUDING sy-repid '1002'.
CALL SUBSCREEN TAB_SCA INCLUDING sy-repid '1003'.
CALL SUBSCREEN TAB_SCA INCLUDING sy-repid '1004'.
CALL SUBSCREEN TAB_SCA INCLUDING sy-repid '1005'.
CALL SUBSCREEN TAB_SCA INCLUDING sy-repid '1006'.
endcase.
endmodule.
but error is displayed as "," or "ID ... FIELD ..." expected after "SUBSCREEN".
Guys Please let me know if someone knows the solution.
Regards,
Chaithanya.

Hi,
In PAI event, you should not use INCLUDING SY-REPID SCREEN_NO
This is causing error.
Wrting CALL SUBSCREEN TAB_SCA only once is enough as you are displaying
multiple subscreens in same subscreen area.
Regards,
Vishal
Edited by: Vishal Jadhav on Dec 9, 2008 3:54 PM

Similar Messages

Facing problem with call subscreen area in standard infotype

Dear SAP Guru's,
I have enhanced standard infotype 0185 from PM01, in assign enhancement tab it create multiple screens ,
my program name ZP018500, screen number 0200 generated,
on 0200 screen i need to display two subscreens tfor that
i have created subscreen area on srcreen 0200 which is already a subscreen.
and i am calling two subscreen 0201 and 0202 on that subscreen area.
while creating entries for 0185 infotype my screen keep going in continious loop for call subscreen statement on 0200 screen number.
roll in fail, session terminated error coming because of this.
is it correct to create subscreen area on subscreen and calling subscreen on that.
Guide me to solve the issue.
Thanks and Regards,
Syed

Dear Gopal,
Thanks for the reply,
But i can't make 0200 screen as normal screen because it is automatically generated by system while enhancing the standard infotype,
Please let me know any other solution.
Regards,
Syed Taj

Problem in calling method with object in another class

Hi All,
Please tell me the solution, I have problem in calling a method I am posting the code also
First Program:-
import java.io.*;
public class One
public One()
System.out.println("One:Object created");
public void display()
System.out.println("One:executing the display method");
static
System.out.println("One:executing the static block");
Second Program:-
import java.io.*;
public class Two
public Two()
System.out.println("Two:Object created");
public static void main(String arg[])throws Exception
System.out.println("Two:executing the main method");
System.out.println("Two:loading the class and creating the object::One");
Object o=Class.forName("One").newInstance();
System.out.println(o);
o.display(); //displaying error here in compile time.
static
System.out.println("Two:executing the static block");
waiting for your answer,
thanks in advance,bye.

Hi All,
Please tell me the solution, I have problem in
calling a method I am posting the code also
First Program:-
import java.io.*;
public class One
public One()
System.out.println("One:Object created");
public void display()
System.out.println("One:executing the display
method");
static
System.out.println("One:executing the static
block");
Second Program:-
import java.io.*;
public class Two
public Two()
System.out.println("Two:Object created");
public static void main(String arg[])throws
Exception
System.out.println("Two:executing the main
method");
System.out.println("Two:loading the class and
creating the object::One");
Object o=Class.forName("One").newInstance();
System.out.println(o);
o.display(); //displaying error here in compile
time.
static
System.out.println("Two:executing the static
block");
waiting for your answer,
hanks in advance,bye.the line
o.display()
could be written as
((One)o).display();

Problem with calling on some numbers

Hi my mum has problem with calling on my number. She is in the USA and has a lof of money on her Skype account. When she was in Poland (country when I am now) she could without any troubles calling on my number. What is wird now in the USA she can call on some other polish numbers (I think that Skype doesn't support connection with my mobile operator).
I fell deceived because I created Skype account and transfered some money on it for my mum to give her possibility to call to me. Is possible to fix it? Is somewhere table with can help me check which one numbers (mobile operators) Skype supports in the USA?
My mom used Skype from Android smartphone.

Hi my mum has problem with calling on my number. She is in the USA and has a lof of money on her Skype account. When she was in Poland (country when I am now) she could without any troubles calling on my number. What is wird now in the USA she can call on some other polish numbers (I think that Skype doesn't support connection with my mobile operator).
I fell deceived because I created Skype account and transfered some money on it for my mum to give her possibility to call to me. Is possible to fix it? Is somewhere table with can help me check which one numbers (mobile operators) Skype supports in the USA?
My mom used Skype from Android smartphone.

Calling subscreen on click of radio button

Hi,
I am creating a module pool program , in which on click of a radio butto to 'YES' a subscreen should appear ( on the main screen) with few fields so that the user can input values of it.
But I am having proble in calling the subscreen in PAI event.Actually I think it should be something like this
Module user_command.
case sy-ucomm.
   when rb_yes = 'X'
    { CALL SUBSCRREN CODE
ENDIF.
Can this be done? I f yes how? I only know how to call subscreen in PBO, but the syntax for calling subscrren is different in PAI i think.

Hi,
Try doing this.
This is your flow logic in the main screen to call the Subscreen's PBO
PROCESS BEFORE OUTPUT.
MODULE STATUS_0110.
CALL SUBSCREEN TAB1_REF1 INCLUDING 'ZTRIAL' '0111'.
In the PAI of the main screen,
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0110.
CALL SUBSCREEN TAB1_REF1.
Assign a function code to your radio button.
Layout -> Attributes -> Function Code
In the TOP include,
DATA: v_dynnr type sy-dynnr.
In module USER_COMMAND_0110.
if p_rad = 'X'.
   v_dynnr = '0111'.
else.
v_dynnr = ' '
endif.
You can check this for your reference
[http://help.sap.com/saphelp_nw04/Helpdata/EN/9f/dbabfe35c111d1829f0000e829fbfe/content.htm]

Calling subscreen in module pool

Hi friends,
I am trying to call sub-screen in module pool.
but it is giving me an error as "." or "ID ... FIELD ..." expected after "SUBSCREEN".
i am using followning statement
CALL SUBSCREEN SUB INCLUDING SY-REPID '0101'.
OR
CALL SUBSCREEN SUB. (SUB is screen i have created in layout).
I tried it a lot, but not able to solve it.
Kindly help me.

Hi Kiran,
<li>Subscreen concept is like this. You have one main screen. You want another screen which has to be displayed on main screen when you run main screen.
<li>First we need to create subscreen area on main screen. Goto layout and click subscreen element and place on main screen and name to that subscreen area as SUB.
<li>Now create another screen type subscreen. place fields on that and write logic.
<li> Check REPORT demo_dynpro_subscreens.
Thanks
venkat.O

Character conversion problems when calling FM via RFC from Unicode ECC 6.0?

Hi all,
I faced a Cyrillic character convertion problem while calling an RFC function from R/3 ECC 6.0 (initialized as Unicode system - c.p. 4103). My target system is R/3 4.6C with default c.p. 1500.
The parameter I used in my FM interface in target system is of type CHAR10 (single-byte, obviously).
I have defined rfc-connection (SM59) as an ABAP connection and further client/logon language/user/password are supplied.
The problem I faced is, that Cyrillic symbols are transferred as '#' in the target system ('#' is set as default symbol in RFC-destination definition in case character convertion error is met).
Checking convertions between c.p. 4103 and target c.p. 1500 in my source system using tools of transaction i18n shows no errors - means conversion passed O.K. It seems default character conversion executed by source system whithin the scope of RFC-destination definition is doing something wrong.
Further, I played with MDMP & Unicode settings whithin the RFC-destination definition with no successful result - perhaps due to lack of documentation for how to set and manage these parameters.
The question is: have someone any experience with any conversion between Unicode and non-Unicide systems via RFC-call (non-English target obligatory !!!), or can anyone share valuable information regarding this issue - what should be managed in the RFC-destination in order to get character conversion working? Is it acceptable to use any character parameter in the target function module interface at all?
Many thanks in advance.
Regards,
Ivaylo Mutafchiev
Senior SAP ABAP Consultant

hey,
I had a similar experience. I was interfacing between 4.6 (RFC), PI and ECC 6.0 (ABAP Proxy). When data was passed from ECC to 4.6, RFC received them incorrectly. So i had to send trimmed strings from ECC and receive them as strings in RFC (esp for CURR and QUAN fields). Also the receiver communication channel in PI (between PI and RFC) had to be set as Non unicode. This helped a bit. But still I am getting 2 issues, truncation of values and some additional digits !! But the above changes resolved unwanted characters problem like "<" and "#". You can find a related post in my id. Hope this info helps..

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?

Try
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

Problem in calling BRI from PRI

Hi,
I am having problem in calling BRI from PRI. I am getting below message while debugging. Also note that calling from BRI to PRI is successful.
Mar 2 23:38:22: ISDN BR0/0 Q931: RX <- SETUP pd = 8 callref = 0x04
Sending Complete
Bearer Capability i = 0x8890
Standard = CCITT
Transer Capability = Unrestricted Digital
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Progress Ind i = 0x8281 - Call not end-to-end ISDN, may have in-band info
Calling Party Number i = 0x2183, '1726601501'
Plan:ISDN, Type:National
*Mar 2 23:38:22: ISDN BR0/0:1: Incoming call rejected, unbindable
*Mar 2 23:38:22: ISDN BR0/0 **ERROR**: host_incoming_call: DIALER ERROR 0x1: b channel 0, call id 0x15E
*Mar 2 23:38:22: ISDN BR0/0 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x84
Cause i = 0x8095 - Call rejected
Pls help me.
Anis
9229109694

Dear Dharmesh,
Can u pls explain where to enable PPP Multilink.
Dear p.bevilacqua ,
I did what u told (configure "ppp chap username" under dialer interface), but the problem is same.
Anis

Problem with CALL TRANSFORMATION xml - abap

Hello!
I got the following problems using call transformation to read a xml-file to local abap datatype!
Simple xml file for testing:
<BMECAT>
<HEADER>
asdf
</HEADER>
</BMECAT>
XSLT file:
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" version="1.0">
<xsl:template match="/">
    <xsl:value-of select="./BMECAT/HEADER"/>
</xsl:template>
</xsl:transform>
The xslt transformation works with xslt-tester!
My Source:
DATA: xmlupl TYPE string,
outputx TYPE XSTRING,
lv_string TYPE string.
* in xmlupl my xml import is stored
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
EXPORTING
text = xmlupl " variable type string
IMPORTING
buffer = outputx. " variable type xstring
TRY .
     CALL TRANSFORMATION path_to_xslt_file
       SOURCE XML outputx
     RESULT HEADER = lv_string.
CATCH cx_xslt_exception INTO xslt_error.
     data: xslt_message type string .
     xslt_message = xslt_error->get_text( ).
ENDTRY.
After debugging in xslt_message is stored the following text:
"The element abap was expected for the XML-ABAP transformation"
Can anyone help me with this problem?
Regards,
Daniel

hi
good
try this code
Just look at this piece of code, I think it should help you.
DATA : ITAB   TYPE TABLE OF SPFLI,
         L_XML TYPE REF TO CL_XML_DOCUMENT.
SELECT * FROM SPFLI INTO TABLE ITAB.
CREATE THE XML OBJECT
CREATE OBJECT L_XML.
CONVERT THE DATA TO XML
CALL METHOD L_XML->CREATE_WITH_DATA( DATAOBJECT = ITAB[] ).
DATA IS CONVERTED TO XML; DISPLAY THE XML-DOCUMENT
CALL METHOD L_XML->DISPLAY.
thanks
mrutyun^

Problem with call forwarding. Calls can not be forwarded for incoming external calls

Hi Everybody, how are you?
I have a problem with call forwarding. Everything was fine but now is not working.
In the reception of an office, the receptionist activate the call forward option to an internal extension. If somebody, internal in the office, call to the reception, the call is forwarding to the extension configured. But if I call from the outside (in example, from my cellphone) the call is not forwarded to the extension configured and continue ringing in the reception phone. Why this behavior? Any idea?
If you know something please tell me.
Thanks. Best regards.
Andres Collazos.

I encounter a similar problem with 9.1.1.
My problem is link to this bug ID : CSCtq10477.
Mathieu

Problem with Call Transaction opt-RACOMMIT = 'X'.

Hello Experts
I am having a problem with call transction. I am calling a Z transaction in function module. Within the Z transaction I am furhter calling some function modules and doing commit work and then some more processing after the comit work inside So to make sure the code after comit work is fired I am using opt-RACOMMIT = 'X' in call transaction. Whenever I set this parameter opt-RACOMMIT = 'X' call transaction fails and gives error saying No batch Input data for screen XXXX. However the Z tcode processed succesfully.
By changing the Mode to E i found that it remians at the last screen of call transction after executing the Z transaction and never comes back
But if I donot use RACOMMIT = 'X' everything is fine. Please let me know if anyone came across such problem. Any help will be apreciated.
Thanks,
kamal

Hello,
as you said, if there is more than commit statement in your ztransaction, then you should put RACOMMIT to 'X'.
I think the problem is in your bdcdata: change it to be sure to get back to the 1st screen of your ztransaction. Then, at this point (1st screen) hit "back" button.
Cordialement,
Chaouki

Problem with call of function F4UT_RESULTS_MAP in search help exit

Hi everybody,
i have a problem concerning call of function F4UT_RESULTS_MAP.
I call this function in this way:
CALL FUNCTION 'F4UT_RESULTS_MAP'
       TABLES
            shlp_tab          = p_shlp_tab
            record_tab        = p_record_tab
            source_tab        = lt_zv055[]
       CHANGING
            shlp              = p_shlp
            callcontrol       = p_callcontrol
       EXCEPTIONS
            illegal_structure = 1
            OTHERS            = 2.
in lt_zv055[] there are results from previous select, but i want to select only values,
that match select options that are specified in p_shlp.
But it always shows all the values that are in lt_zv055.
What am i doing wrong?
Thanks in advance.

Read the "Notes" part in FM documentation and you will find the reason .

Problem with calling onApplicationStart() method

Hi all,
     I have a problem with calling application.cfc's methods from coldfusion template. The problem is like when i am calling "onapplicationstart" method inside a cfml template i getting the error shown below
The onApplicationStart method was not found.
Either there are no methods with the specified method name and argument types or the onApplicationStart method is overloaded with argument types that ColdFusion cannot decipher reliably. ColdFusion found 0 methods that match the provided arguments. If this is a Java object and you verified that the method exists, use the javacast function to reduce ambiguity.
My code is like below.
Application.cfc
<cfcomponent hint="control application" output="false">
<cfscript>
this.name="startest";
this.applicationtimeout = createtimespan(0,2,0,0);
this.sessionmanagement = True;
this.sessionTimeout = createtimespan(0,0,5,0);
</cfscript>
<cffunction name="onApplicationStart" returnType="boolean">
    <cfset application.myvar = "saurav">
<cfset application.newvar ="saurav2">
    <cfreturn true>
</cffunction>
</cfcomponent>
testpage.cfm
<cfset variables.onApplicationStart()>
I have tried to call the above method in different way also like
1--- <cfset onApplicationStart()>
i got error like this
Variable ONAPPLICATIONSTART is undefined.
2---<cfset Application.onApplicationStart()>
The onApplicationStart method was not found.
Either there are no methods with the specified method name and argument types or the onApplicationStart method is overloaded with argument types that ColdFusion cannot decipher reliably. ColdFusion found 0 methods that match the provided arguments. If this is a Java object and you verified that the method exists, use the javacast function to reduce ambiguity
Please help me out.
Thanks
Saurav

You can't just call methods in a CFC without a reference to that CFC. This includes methods in Application.cfc.
What are you trying to do, exactly, anyway? You'd probably be better served by placing a call to onApplicationStart within onRequestStart in Application.cfc, if your goal is to refresh the application based on some condition:
<cffunction name="onRequestStart">
     <cfif someCondition>
          <cfset onApplicationStart()>
     </cfif>
</cffunction>
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/

Problem in Calling Subscreens

Similar Messages

Maybe you are looking for